HELLO TO STAFF
i hv hcl me u1 tablet. and it is behaving weird. last time i try to install a iron man 3 game and wont install so i get it at my shop.
(actually it belongs to my kids).. i do all reset. and delete things but nothing is working
i go in recovery and wipe formatt .. but nothing is being deleted.. all thing is as it is.
no new thing is being copy or being deleted in it..
so i open it and try to short it out. rediculously i found one more sd card of 4gb inside tablet chip.
i remove and put it in reader . connect to pc. it shows 1.8gb total and free around 800mb.
i guess rest of part is rom part in sd card bcouse without that memory chip tablet is not booting up. i replace another 4gb and 8gb but nothing working..
and i put back that sandisk 4gb back in hcl chip and it boots up as regular ...
problem is it is not being formated or not being hard reset in recovery.. i use MPTOOL . i updated with it. but nothing working out for new game or installations
for me the only solution left is to replace that 4gb SANDISK sd card which might cotain rom part..
so how to make that vimicro disk to make tab work normaly...
i attach the photo of board with sd card installed..
i hope some HCL GUY can help me..
solved hcl me u1
problem sloved
by updating with mptool with new sd card of 8 gb. in boot mode without sd card than insert sd card
it takes lot time and two time factory reset .. but working now but ram is as low below 300 mb
any body hv problem with hcl me u1 with hanging restarting or anything is not installing and deleting
change sd card of your choise 8gb or more and install rom
any question can ask me i just solved it
regards
skhan
Similar problem in HCL ME V1, but no solution so far
Hi,
I have an HCL Me V1 tab. My problem is something similar to yours. I was copying an apk (FL Studio Mobile) and a folder related to it (extra downloadable contents) from my laptop to the tablet (from laptop to /sdcard/Android/obb). Basically I had downloaded the apk and dlc from Pirate Bay. I'm sure there was no problem with these files as I had not even run these files in the tablet when the problem started.
First my laptop got hanged, but somehow I disconnected the tablet safely. However after I rebooted the tablet, it got stuck in a loop in the boot screen. I tried resetting it but it did not work. Also for some reason I am not able to do a hard reset on that tablet. The device simply refuses. When I remove the external SD card, the device won't even start when I press the reset pin hole.
There is one peculiarity to my problem however. The power button has stopped working. I can only start the tablet by the reset pin hole. I am sure this is not a hardware issue as I am 100% positive the tablet did not experience any physical shock.
It is a rooted device with rooted apps. Android ICS 4.0.4, kernel 3.x.x.
I plan on doing exactly what you did, i.e. open up the device, get a new sd card, load the ROM on it and put it back in. However, can you suggest any other alternatives before I do that?
Thanks,
Pari
Thanks!
I once encountered the same problem exactly as you described, but the device was in warranty and the service center fixed it.
Now i know what was the issue.
Thanks for your efforts because the i believe that it will help everyone who owns it as it will encounter problems with the device as HCL fooled us everyone with this model.
hcl me u1 is acting like crazy.
Hello ,I'm Kaushik Chauhan.
i have hcl me u1 tablet.
it is behaving crazy.
I can't save data on it.
whenever I restart it ,it is reset.
I tried to do factory reset, but nothing is changed.
I have also opened it and take out that internal sandisk of 4 gb.
inserted it mmc reader and connect it to ubuntu.
however I am not able to mount it.
but I managed to view partitions on it.
to my surprize,
there are six(believe me) partitions.(thanks to DISK UTILITY)
1. maximum size 2.5 gb. which I see in.xplore.
2. system 700 mb
3. data 400 mb
4.tmp 40 mb
5. and 6 are unallocated (I think).
(I will upload screenshot of it.soon)
but I am not able to mount any of it.
that 2.5 gb is fat32 but when I tried to mount it I got some superblock type error.
what is the problem.
and why xplore (file manager) shows two sd cards each of size 2.5 gb.(and identical to one another in context of files and folder.)
however its spec says 4 gb.(I have not attached any external sd or pendrive)
so here is my sd card partitions::
1:: 2.6 GB FAT :: that is what i see in file manager:: I can mount it.
2:: 1.3 GB Extended :: What is it? . there is no option to Mount it in Disk Utility.(Only one option 'Delete Partition').
3:: 403 MB ext2 :: I cant mount it.
(Error :: "Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so" )
4:: 786 MB ext2 Userdata :: same as system ("Error is also same")
5:: 67 MB ext2 cache :: same as system ("Error is also same")
6:: 34 MB unknown :: only three option (Format Voulme,Edit Partition,Delete Partition)
7:: 34 MB unknown :: same as above
sam1skhan said:
problem sloved
by updating with mptool with new sd card of 8 gb. in boot mode without sd card than insert sd card
it takes lot time and two time factory reset .. but working now but ram is as low below 300 mb
any body hv problem with hcl me u1 with hanging restarting or anything is not installing and deleting
change sd card of your choise 8gb or more and install rom
any question can ask me i just solved it
regards
skhan
Click to expand...
Click to collapse
Thank you i finally reset my internal sd card..but as you said my tablet is very slow and always hang then turn off..is there any way solve this problem?
@cyberking147.and mixxskratch, pborah88
my tab is again corrupted and not being reset or copy data or delete data from it... may b the reason i found out is tab stays non used or on low charge bettery
or the poor quality of sd card which i replaced..
i am willing to replace with the original sandisk or the samsung class 8 or something best quality with some warranty....
slow tab >>>it may b due to sd card becoz this fools install rom on sd card. can you believe it?? i was shocked
i will post results when i replace another sd card of samsung class 8 of 8gb..
one more thing you can also extend your internal memory of tab by replacing the provided 4 gb.. 8gb will give you 5 gb of free internal storage..
this may help those whose mmc slot and usb are not working
regards
skhan
sory for late reply coz i dont see any notification in msgs
so sory
Thank You...I replaced my internal 4gig sd card of 8gig.still it;s hang and slow
mixxskratch said:
Thank You...I replaced my internal 4gig sd card of 8gig.still it;s hang and slow
Click to expand...
Click to collapse
did you check the ram..
do you know the ram before?
there are options in selecting ram ,
if you hv flashed rom with 512 ram selection it will b slower .
there are two models they(hcl) hv launched. 1 512mb ram and 2, 1 gb ram...
1gb ram was lilttle more speedy than of 512.
go to settings and apps and check ram in RUNNING...
NOT MUCH WE CAN DO WITH IT. COZ ITS REALLY OLDIE
TRY TO FLASH WITH 1GB SELECTION , IF YOU GOT BOOT LOOP. HANG ON HCL LOGO THAT MEANS YOU DNT HV 1GB RAM MODEL. YOU HV TO FLASH IT AGAIN WITH 512 SELECTION
EVEN ONE OF MY FRIEND HV ONE GB CONFIGURATION WRITTEN ON BOX AND 512 IN DEVICE..
REGARDS
SKHAN
sam1skhan said:
did you check the ram..
do you know the ram before?
there are options in selecting ram ,
if you hv flashed rom with 512 ram selection it will b slower .
there are two models they(hcl) hv launched. 1 512mb ram and 2, 1 gb ram...
1gb ram was lilttle more speedy than of 512.
go to settings and apps and check ram in RUNNING...
NOT MUCH WE CAN DO WITH IT. COZ ITS REALLY OLDIE
TRY TO FLASH WITH 1GB SELECTION , IF YOU GOT BOOT LOOP. HANG ON HCL LOGO THAT MEANS YOU DNT HV 1GB RAM MODEL. YOU HV TO FLASH IT AGAIN WITH 512 SELECTION
EVEN ONE OF MY FRIEND HV ONE GB CONFIGURATION WRITTEN ON BOX AND 512 IN DEVICE..
REGARDS
SKHAN
Click to expand...
Click to collapse
I don't know how to check the ram. If i use again the mptool can i change the settings to 1gig ram? and how to do it?
12 2828545
Hcl ME u1 hardware looks similar to BSNL penta is703c. I just installed the official stock rom of HCL u1 to my penta tab. IT does seem to work..
oh yeah, i changed SD card to 32 Gig...
using mp tool, try using different DDR settings.. (Check attachments)
mixxskratch said:
I don't know how to check the ram. If i use again the mptool can i change the settings to 1gig ram? and how to do it?
Click to expand...
Click to collapse
go to settings > application manager> slide to see running app. at the bottom u can find the ram and the free ram and used ram
the tab only can support 1g ram if it is build with that . some tab come with 512 and some with 1g.b
so try various selection in mp tool > go to ddr setting. select elpida or micron wich supports u that u will have to find out. and be patient after flashing dont do any fulish. if it does not work it wil go in boot loop . just hcl and nothing. than try other selection like elpida or micron.
to go in boot loader mode u need to remove mmc and data cable and than
insert data cable nd press power on button u find the disk iand vdfu driver will install and than put 4 gb or 8gb mermoy card and flash it
regards
skhan
HCL ME tablet U1
Sir,
My hcl tablet is behaving awkwardly. firstly, after every 4 to 5 weeks it starts hanging up and i have to send to centre to fix it. secondly, Everything gets stopped be it settings, gallery, file manager or anything and i have to factory reset it and loose every game i installed. But curiously this time i dont know what happened and i cant even factory reset it! it just reboots and nothing else. Even when i uninstall an app, it reboots again and what i see is that the app hasn't been uninstalled and it appears again! the only thing that works at its best is the calculator.
Suggest me what to do.
Hoping a reply as soon as possible
Thank you
-Yaagyanika
HCL me u1 WILL NOT RESET anymore..
Hey Everybuddy, ( Frusteted with HCL ME U1)
This is KAUSHIK CHAUHAN
I have solved the problem of it being reset evertime we restart it.
things you need ::
1 :: A new MicroSD card ( I prefer (actually used ) Sandisk Mobile Ultra 8gb Class 10).
I brought it from Flipcart for just Rs.340 .
2 :: Stock ROM for our tab , Dont download any other rom they have some performance issue
Here is Link :: xww.hclsupportservice.in/Drivers%5CFamily%5CTablet%5CCategory%5CHCL_ME_Tablet%5CU1%5CImage%5CU1_0421_Image.rar
3 :: A PC running windows.
After Having these 3 thing ....
Steps ::
1 :: take rear cover of tab , take that metal cover over circuit.
see that sandisk microsd 4 gb ?
that's the problem ! take it out.
and put new sd card there.
now fit rear cover again as it was .
DONT TRY TO TURN ON THE TAB
on to the computer ::
connect tab with pc via USB cable. (in Switched OFF state.)
U should see a new drive in my computer (dont open and close that popup window)
2 :: Extract file U1_0421_Image.rar
:: open mptool.exe ( I prefer run as Admin.)
:: U should see the message "1 device reddy".
if not Dont Worry .
3 :: then go to the setting on mptool.
select the "vortex.pak" for PAK File.
now the tricky part : Carefully
look at your tab specs ,
If it says RAM = 1 GB
then In partition setting set System(MB)=1024
and DDRtype = elpida 8bit 1024
If it says RAM = 512 MB
then In partition setting set
System(MB)=512
and DDRtype = elpida 8bit 512M
DONT TOUCH ANYTHING ELSE !
4 :: OK done ? then Save it .
5 :: now click on scan if it doesn't say "1 Device Reddy".
6 :: click on Update.
7 :: wait and let it complete.
8 :: now tab must be restart automatically. It will take some time for first boot so dont panic.
I hope u now have a working tab.
open apps and u will see "Market"
thats it !
Nowadays HCL is providing market app with new tab (I have not when i purchased it).
now it has market not play store
and it will not update itself.
so,
Find any android device with Google Play Store inbuilt.
open xplore on it (if it doesnt there just download it (nearly 2 mb))
in config set root = normal works on all device.
now go to /system/app
copy "vending.apk" file to sdcard and send it to OUR HCL ME U1 tab and install it .
after a network connection it will update itself.
and u can enjoy working latest play store.
thanks for reading..
Thanks a lot for your help
cyberking147 said:
Hey Everybuddy, ( Frusteted with HCL ME U1)
This is KAUSHIK CHAUHAN
I have solved the problem of it being reset evertime we restart it.
things you need ::
1 :: A new MicroSD card ( I prefer (actually used ) Sandisk Mobile Ultra 8gb Class 10).
I brought it from Flipcart for just Rs.340 .
2 :: Stock ROM for our tab , Dont download any other rom they have some performance issue
Here is Link :: xww.hclsupportservice.in/Drivers%5CFamily%5CTablet%5CCategory%5CHCL_ME_Tablet%5CU1%5CImage%5CU1_0421_Image.rar
3 :: A PC running windows.
After Having these 3 thing ....
Steps ::
1 :: take rear cover of tab , take that metal cover over circuit.
see that sandisk microsd 4 gb ?
that's the problem ! take it out.
and put new sd card there.
now fit rear cover again as it was .
DONT TRY TO TURN ON THE TAB
on to the computer ::
connect tab with pc via USB cable. (in Switched OFF state.)
U should see a new drive in my computer (dont open and close that popup window)
2 :: Extract file U1_0421_Image.rar
:: open mptool.exe ( I prefer run as Admin.)
:: U should see the message "1 device reddy".
if not Dont Worry .
3 :: then go to the setting on mptool.
select the "vortex.pak" for PAK File.
now the tricky part : Carefully
look at your tab specs ,
If it says RAM = 1 GB
then In partition setting set System(MB)=1024
and DDRtype = elpida 8bit 1024
If it says RAM = 512 MB
then In partition setting set
System(MB)=512
and DDRtype = elpida 8bit 512M
DONT TOUCH ANYTHING ELSE !
4 :: OK done ? then Save it .
5 :: now click on scan if it doesn't say "1 Device Reddy".
6 :: click on Update.
7 :: wait and let it complete.
8 :: now tab must be restart automatically. It will take some time for first boot so dont panic.
I hope u now have a working tab.
open apps and u will see "Market"
thats it !
Nowadays HCL is providing market app with new tab (I have not when i purchased it).
now it has market not play store
and it will not update itself.
so,
Find any android device with Google Play Store inbuilt.
open xplore on it (if it doesnt there just download it (nearly 2 mb))
in config set root = normal works on all device.
now go to /system/app
copy "vending.apk" file to sdcard and send it to OUR HCL ME U1 tab and install it .
after a network connection it will update itself.
and u can enjoy working latest play store.
thanks for reading..
Click to expand...
Click to collapse
Thanks a lot for your help... I could revive my HCL U1 tab I have inserted 16GB microSD card
about sd card and ram
not working in 8gb sd card and is there any way to get backn lost ram
and thanks for help
Storage problam
When i try to update my tablet it will disconnect on its own
what can i do????????
unable to flash hcl me u1
RAJWINDERS said:
When i try to update my tablet it will disconnect on its own
what can i do????????
Click to expand...
Click to collapse
Hi ,
same thing is happening with me. When I try to flash my u1 tab with mptool.exe,after 2-3 seconds it's givig a long beep and download error message is getting displayed .
plzz help anyone!!!!!!!!!!!!!!!!!
hcl me u1
how to install new rom in 8gb sdcard in hcl me u1
Dear developers,
Recently I got a new phone Vivo Y22 with Funtouch OS v1.0 (Christmas present). Its was okay at first then it start telling me that storage has not enough space (with only factory apps and Clean Master). I realize the it had about 4GB internal storage but divided to 2 parts. 2.5GB for system space and 1.06GB as internal storage. In system space, i have only 150mb left I always need to use Clean Master to wipe cache before I download anything. I tried Link2SD, I formatted my SD card and set 4GB partition as EXT2 but did not detect. Same goes for EXT3 and EXT4. It only works for FAT32 but some files cannot be linked using this format. Read some threads in web, they mentioned some phone does not support EXT2,3,4 format. Maybe this is my case? I tried to look for informations about Vivo Y22 but very less and worst, some of them is in chinese.
So the 1st question is: How can I increase the system space? Could I adjust the system space to occupy my more of my Internal Memory?
Second question is, how do I update my phone from JellyBean to KitKat? Do I follow tutorials that uses the same Chipset (Y22 uses MediaTek MT6582)? How if I want to install custom ROMs like CM11 (can't find Vivo Y22 in Device section in CM site so i presume it is not supported?)? There is very less information about rooting and flashing when it comes to this phone. I only manage to root the phone using tutorials given for some other chinese phone.
Thanks in advance..
By,
adlfurball
(just started using smartphone 3 weeks ago, was using old flip phones before hand)
Did you ever manage to fix this? I'd love to root my Y22 and put vanilla Android on there but can't find how to do it. The memory problem is useless on this phone.
One of my friend is using Iuni U2 32GB version( no SD card).
He flashed Walton Primo Z 16 GB(U2 rebrand) Vanilla KitKat ROM.
After flashing, His phone's internal memory shows only 16gb.
I think after flashing that ROM his phone's partition was changed.
How to repartition or get back remaining internal memory?
Any one helping me ??
Iuni u2 now only 16gb
I have same problem here now, I have after vanilla rom flash only 16gb. If it's an solution I need also help. How to recover memory? I found that it's an partition called mmcblk0p22 that have 14,62Gb that is not mounted . ( 179/22 , mmcblk0p22, grow | xx | Not Mounted)
This info it's returned by app called "Storage Partition" if enter in Advanced
Have You Find any Solution ???
How are both of you doing in this matter - any success?
BTW. I spoke to fella on some Polish forum and he said, that event though, the system shows 16GB, the memory over that 16GB is still accessible. He told, that file manager - Total Commander shows the space correctly, and that he experimanted with Nokia Here, stuffed it with maps and managed to occupy 23GB in total. All that sounds comforting and if it's only one marker that's shown wrongly, it shouldn't be a big thing.
any solution?
my 32 gb iuni gone after this primoz rom.it is now 16 gb! anyone find solution. i found flashable zip from 4pda. it not work. help pls
try this
https://docs.google.com/uc?id=0BwjuITwP4ku4bzBjdHQ3STZPX2M&export=download
Need help, i have lenovo vibe C (a2020a40) 16gb internal memory, last night i was try to flashing new firmware for my lenovo vibe c by searching on google, but unfortunately all the stock rom is for 8gb version and i already flashing it using Qfil method, and now its read in storage options just only 8gb, does anyone can help me to bring it back my device to original 16gb version instead of 8gb, i think all the roms in that i search in google only share for 8gb versions, does anyone have link to download stock rom for vibe C 16Gb version? #sorry for my bad english
cervo29 said:
Need help, i have lenovo vibe C (a2020a40) 16gb internal memory, last night i was try to flashing new firmware for my lenovo vibe c by searching on google, but unfortunately all the stock rom is for 8gb version and i already flashing it using Qfil method, and now its read in storage options just only 8gb, does anyone can help me to bring it back my device to original 16gb version instead of 8gb, i think all the roms in that i search in google only share for 8gb versions, does anyone have link to download stock rom for vibe C 16Gb version? #sorry for my bad english
Click to expand...
Click to collapse
Hi, got the same problem but i resolved it by going to recovery then do wipe factory and wipe cache. after restart, it became 16gb again. hope that helps
androidhen said:
Hi, got the same problem but i resolved it by going to recovery then do wipe factory and wipe cache. after restart, it became 16gb again. hope that helps
Click to expand...
Click to collapse
Custom rom:
https://forum.xda-developers.com/and...20a40-t3567812
Stock rom:
https://www.leakite.com/2016/12/leno...-firmware.html
SS means single sim and DS means dual sim obviously.
The second link seems to be broken. Here is the correct one - https://www.leakite.com/2016/12/lenovo-vibe-c-a2020a40-firmware.html
call to ####7777# than Rom 16Gb is back
I have Lenovo A2020A40. Two sim card slots. I think it's 8GB. It downloads a firmware called USR_S197_1707170945_Q8909 but installation gives an error. error in cache/recovery/block.map (status 7).
Can I download it from somewhere and update it manually?
Edit: I made an factory reset, I did wipe data thing but it shows apps that I think are from the previous owner like KingRoot, UC browser, Facebook. I'm sure they are not part of the package right? So how does one start from scratch here?
Edit 2: It shows system/bin/debuggerd has unexpected contents so I might need that file replaced, right? How is this done?
Hello there...I have Rooted Lenovo A6000+ currently running on KitKat, TWRP recovery installed.
My system is using 11.31 GB of internal storage, my internal storage is all empty not even a single image in it... It shows only 3 GB available storage..!!!!
If anyone can provide a solution it would b a greaatttt help..ðŸ™
rguhe996 said:
Hello there...I have Rooted Lenovo A6000+ currently running on KitKat, TWRP recovery installed.
My system is using 11.31 GB of internal storage, my internal storage is all empty not even a single image in it... It shows only 3 GB available storage..!!!!
If anyone can provide a solution it would b a greaatttt help..ðŸ™
Click to expand...
Click to collapse
Plzzz plzzz provide me with a solution it's almost six months I have made this post plzz give me any solution.