Heeeeelp: Stuck at Samsung Logo - Galaxy S II Q&A, Help & Troubleshooting

Hey guys, I really need your help
I think I bricked my SGS II I9100
It was running latest RRemix and I wanted to try AICP. Installed latest version AICP, Aroma OpenGapps and IsoRec. It stuck at bootanimation, so I installed CM12.1 and IsoRec.Then I shut the phone down, as it was out charge. Later when I turned on it's not booting the ROM showing only Samsung SGS2 logo. I can't access neither recovery nor Download mode. I really need help.
Please any suggestion would be welcome

Muhammadsoli said:
Hey guys, I really need your help
I think I bricked my SGS II I9100
It was running latest RRemix and I wanted to try AICP. Installed latest version AICP, Aroma OpenGapps and IsoRec. It stuck at bootanimation, so I installed CM12.1 and IsoRec.Then I shut the phone down, as it was out charge. Later when I turned on it's not booting the ROM showing only Samsung SGS2 logo. I can't access neither recovery nor Download mode. I really need help.
Please any suggestion would be welcome
Click to expand...
Click to collapse
No download mode sounds like no hope
Maybe an usb-jig can revive ur device but i have no knowledge about using one.
Ur sure the cm12 flash process finished before u shut down the phone? Neither recovery nor download mode sound like a failed or incomplete flash
Anyway,
good luck, Chillmann

Chillmann said:
No download mode sounds like no hope
Maybe an usb-jig can revive ur device but i have no knowledge about using one.
Ur sure the cm12 flash process finished before u shut down the phone? Neither recovery nor download mode sound like a failed or incomplete flash
Anyway,
good luck, Chillmann
Click to expand...
Click to collapse
Sorry I forgot to inform that I have already solved the problem. Yeah I was going to use jig
(I'd be glad if someone could order that for me)
Problem was with IsoRec.
If 3.x.x is installed after LP ROM the phone is stuck at logo
Solution: VolDwn+Home+Pwr keys should be hold until phone boots to Download Mode

Do you have an acces upon recovery?

Related

[Q] Galaxy S I900 reboot loop

Hey guys, I'm new to this forum - looks wonderful!
Unfortunetly I got here with a big problem :
I've been trying to flash some ROM but it never succeeded.
When I start my phone I see the CM7 logo coming up, right after that I get a screen like its trying to install the ROM or somthing...few lines being written to a log looks like recovery mode and then the phone is rebooting again and this process happens again...infinite loop!
I cannot get my phone into download mode in any way..tried :
1) vol up/down/both + home + power
2) 301k ohm JIG between the 4th and 5th pins
Nothing helped, cannot see the phone in Odin when its rebooting like that.
Some history - I never been to download mod, but been to recovery.
I had CM7 installed before trying to flash this new ROM.
Any help would be appreciated, if its possible at all.
Thanks!
If yount wont come to download mode it is hsArd to belive you can fix this. As i wrote you also wont get into recovery mode.... are you sure your dooing it right there are lots of youtube vids out there. I have some issues too to get in download or recovery with my galaxy. You hav to stop press once you see the galaxy logo... if you get to recovery mode under advance you can boot to download mode...
Once you are there search a rom you can install over odin like darkys rom 9.2 i think.....
Otherwise bring it to samsung...
Cheers and good luck

[Q] help urgently

Hello guys please help me : I have a vibrant i had a costume CM10 nighty on it , but suddenly it crashed I tried to reboot it but it stuck on galaxy s logo , I cant enter my CWM what should I do please help me
Thank you in advance
1) If you can, get into recovery and reflash.
2) If not, its odin time, return to stock, I would recomend this, obviously something didn't write correctly, best to start fresh. Nightlies are always risky.
Sugartibbs said:
1) If you can, get into recovery and reflash.
2) If not, its odin time, return to stock, I would recomend this, obviously something didn't write correctly, best to start fresh. Nightlies are always risky.
Click to expand...
Click to collapse
thank you for replying but could you give me links and etc for what i need to flash the stock rom please
AW: [Q] help urgently
Look here
http://forum.xda-developers.com/showthread.php?t=849028
Sent from my SGH-T959 using xda app-developers app
Dr.Hosam said:
Hello guys please help me : I have a vibrant i had a costume CM10 nighty on it , but suddenly it crashed I tried to reboot it but it stuck on galaxy s logo , I cant enter my CWM what should I do please help me
Thank you in advance
Click to expand...
Click to collapse
One othe thing you could do is, connect the phone to your computer and runf
adb reboot recovery
to take you to the recovery.
Good luck.
sada23 said:
One othe thing you could do is, connect the phone to your computer and runf
adb reboot recovery
to take you to the recovery.
Good luck.
Click to expand...
Click to collapse
i cant get it to download mode i have this phone-computer logo on the screen what should i do....thank you in advance
[QUOtakinhHosam;38574314]i cant get it to download mode i have this phone-computer logo on the screen what should i do....thank you in advance[/QUOTE]
Try taking off the back cover. Pull the battery out for about 30 seconds. Put the battery back and replaced the back cover. Try to bout normally. It it doesn't , try to get into download mode.

[Q] My Galaxy Mega Doesn't Work! Help!

Hello everyone.
My phone: Samsung Galaxy Mega 6.3
Today I decided to install CM11 on my phone. When I try to install recovery with Odin it was succesfully but when the phone restarts "set warranty bit recovery "
I researched this problem on the internet, someone writed If I reinstall the original ROM (from sammobile.com) the problem would be solved.
But it was worse. Because now the phone doesnt turn on. recovery mode and downloading mode doesnt working.
How can I recover the phone please help me. If you tell us step by step..
harbiaslan said:
Hello everyone.
My phone: Samsung Galaxy Mega 6.3
Today I decided to install CM11 on my phone. When I try to install recovery with Odin it was succesfully but when the phone restarts "set warranty bit recovery "
I researched this problem on the internet, someone writed If I reinstall the original ROM (from sammobile.com) the problem would be solved.
But it was worse. Because now the phone doesnt turn on. recovery mode and downloading mode doesnt working.
How can I recover the phone please help me. If you tell us step by step..
Click to expand...
Click to collapse
Hi..what model is your mega and which recovery did you use and were did you get the recovery from as the yellow warranty means that knox security is on you phone and any custom recoveries or custon roms will show this..but first have to find what model your phone is and which recovery was used.
Sent from my SGH-I527M using XDA Free mobile app
starmaster10 said:
Hi..what model is your mega and which recovery did you use and were did you get the recovery from as the yellow warranty means that knox security is on you phone and any custom recoveries or custon roms will show this..but first have to find what model your phone is and which recovery was used.
Sent from my SGH-I527M using XDA Free mobile app
Click to expand...
Click to collapse
My phone model is Galaxy Mega 6.3 GT-I9200.. I installed TWRP..
in addition, the screen remains black, boot animation does not even come
harbiaslan said:
My phone model is Galaxy Mega 6.3 GT-I9200.. I installed TWRP..
in addition, the screen remains black, boot animation does not even come
Click to expand...
Click to collapse
samething happened to me, but its not broken, something just happens to where you cant see the boot logo picture anymore but the backlight still comes on.
try this.
when turning on your phone go through the steps to get to download mode
then plug it into your computer you should hear it connect.
if not you dont hear the connection then either your computer volume isnt up or you
didnt follow all of the steps to enter download mode correctly.
once youve gotten to download mode flash PHILZ CWM recovery for the i9200
then reboot
when turning on your phone go through the steps to get to recovery, the phone will stay on a black screen until you reach recovery.
wipe data & factory reset.
you should be fine afterwards. although you'll still have a black screen on boot up. just install a custom/stock rom
hope this helped
Thanks a lot for answers. I solved this problem. It was a screen problem and i changed screen of my phone. The phone is working perfect with official samsung Gt-i9200 rom which is published for Russia 4.4.2..

I have compiled TWRP! Help me in fixing issues and making OFFICIAL.

Hereby, I am planning to Make OFFICIAL TWRP for Hennessy (Redmi Note 3 - MTK), compile was successfull.
Where as I don't own a Redmi Note 3 MTK! please test this recovery-hennessy.img and test if its booting.
Here by: we are step behind of official twrp!
http://build.twrp.me/twrp/twrp-3.0.2-0-hennessy.img
test this recovery if booting come on official is up.. please report ASAP.
Thanks to:
@lokjianming
@Dees_Troy
@MSF Jarvis
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Thanks for reply. I am going to work on new build. I hope you will test it! Is squid twpr working?
New build!
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Sir,
Build 2 is OUT! can you say me is it working! if you say working i will update device tree online.
yeah squid was working fine, gonna test build2 and report back in a few minutes
---------- Post added at 06:00 PM ---------- Previous post was at 05:49 PM ----------
not working mate
Here by No issues, I have made a TWRP with Omni TWRP source (working) running on 3.4.x kernel.
Soon you will find [OFFICIAL][TWRP] mostly soon you will find on dl.twrp.me/hennessy
I have unofficial twrp,i dont like use sp flashtool,if you create a twrp flashable zip i test
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv
Taengo0 said:
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv
Click to expand...
Click to collapse
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language
bower1994 said:
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language
Click to expand...
Click to collapse
what i did was wait until my phone's battery completely empty, boot into fastboot and flash squid's twrp...it worked for me but took a lot of time (i left my phone in the bootloop for about one day before the battery goes off)
thanks for the reply

Phone bricked after CM 14.1 update - cant access fastboot

Hi,
i woke up this morning and the CM updater offered me to update for CM 14.1, i thougt welll, why not. mistake :crying:
Now the phone is stuck on the flashing CM logo,
if i try to go to fastboot, than i see the fastboot screen and than black screen and the phone goes back to the flashing CM logo.
Any thoughts?
guytsur7 said:
Hi,
i woke up this morning and the CM updater offered me to update for CM 14.1, i thougt welll, why not. mistake :crying:
Now the phone is stuck on the flashing CM logo,
if i try to go to fastboot, than i see the fastboot screen and than black screen and the phone goes back to the flashing CM logo.
Any thoughts?
Click to expand...
Click to collapse
do u have access to recovery?? if u have, then u can just flash previous build without wiping data..
Think if you press vol+ vol- and power and then use the button combo to boot into TWRP you will be fine, takes abit of messing to get it right.
http://en.miui.com/thread-277276-1-1.html
TRY THIS
saikatmitra71 said:
do u have access to recovery?? if u have, then u can just flash previous build without wiping data..
Click to expand...
Click to collapse
Did you try this solution? Did it work? Did you lose your apps/data?
Solved
Eventually managed to get onto twrp using adb (it was a bit of a statistical process... Didn't always work)
From there I just flashed cm 14.1 again, and it looks OK now
Thanks you all for the help!
Like I said earlier failed flash by CMxx doesn't overwrite TWRP, you can boot back into recovery just have to try a few times. Happened to me pressing both volume buttons and power switched phone off then I used button combo and it booted into TWRP.
Might have to grab a usb cable and use ADB to boot into fastboot. It happened to me and that was the only way for me.
seos83 said:
Might have to grab a usb cable and use ADB to boot into fastboot. It happened to me and that was the only way for me.
Click to expand...
Click to collapse
Don't worry Follow This one No fastboot, no edl, no test point, best way to Recover Xiaomi Device, prepare by me and 100% working {tested}

Categories

Resources