I have compiled TWRP! Help me in fixing issues and making OFFICIAL. - Xiaomi Redmi Note 3 Questions & Answers

Hereby, I am planning to Make OFFICIAL TWRP for Hennessy (Redmi Note 3 - MTK), compile was successfull.
Where as I don't own a Redmi Note 3 MTK! please test this recovery-hennessy.img and test if its booting.
Here by: we are step behind of official twrp!
http://build.twrp.me/twrp/twrp-3.0.2-0-hennessy.img
test this recovery if booting come on official is up.. please report ASAP.
Thanks to:
@lokjianming
@Dees_Troy
@MSF Jarvis

you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING

bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Thanks for reply. I am going to work on new build. I hope you will test it! Is squid twpr working?

New build!
bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
Sir,
Build 2 is OUT! can you say me is it working! if you say working i will update device tree online.

yeah squid was working fine, gonna test build2 and report back in a few minutes
---------- Post added at 06:00 PM ---------- Previous post was at 05:49 PM ----------
not working mate

Here by No issues, I have made a TWRP with Omni TWRP source (working) running on 3.4.x kernel.
Soon you will find [OFFICIAL][TWRP] mostly soon you will find on dl.twrp.me/hennessy

I have unofficial twrp,i dont like use sp flashtool,if you create a twrp flashable zip i test
Inviato dal mio Redmi Note 3 utilizzando Tapatalk

bower1994 said:
you gave me a cool bootloop...
I went thought the boot loop by forcing the phone into sp flash tool mode and then staring normally
anyway, it is not working mate, apreciate the effort but i repeat, THIS RECOVERY IS NOT WORKING
Click to expand...
Click to collapse
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv

Taengo0 said:
bricked my phone flashing the 2nd build...help me recover my phone... what did u do, any tips or link? tks in adv
Click to expand...
Click to collapse
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language

bower1994 said:
hey mate, sorry for late reply just in case anyone is also having this problems ill leave the workaround i followed to recover the phone.
the phone gets into bootlop mode becuase it starts to try get into recovery and it is not working so the phone just starts trying and trying again
You need:
usb cable
pc with sp flash tools software
drivers
a workable rom made for sp flash tools (there tones of them in miui forum)
Steps:
1. you have to prepare to flash the rom and hit download
2. then you connect the phone in the small moment it has the black screen, you have to connect the phone while pressing volume down, the program should react to your phone connection
3. cancel the flashing of the rom before it starts, this should let the phone exit from that bootloop state
4 remove the cable and start your phone normally
5 install a workable recovery with apps like flashify/flashfire
done
Probably if your phone use the whole battery and you start chaguing it up once it is already shut down you should also be able to start into the system partition and not into the recovery mode
i hope i made myself understandable as english is not my primary language
Click to expand...
Click to collapse
what i did was wait until my phone's battery completely empty, boot into fastboot and flash squid's twrp...it worked for me but took a lot of time (i left my phone in the bootloop for about one day before the battery goes off)
thanks for the reply

Related

Stuck in boot logo, and stuck on recovery!

Please help me, I coulnd't find a real solution anywhere for this, since I get stuck in recovery when I vol up+power, or I'll get stuck at boot logo if I hold power. I can only turn off because I pull out the battery on this Lenovo A800. I think it happened when I wiped data,cache, and dalvik after flashing another new rom. How could I revive this? thanks please!
helpplease123 said:
Please help me, I coulnd't find a real solution anywhere for this, since I get stuck in recovery when I vol up+power, or I'll get stuck at boot logo if I hold power. I can only turn off because I pull out the battery on this Lenovo A800. I think it happened when I wiped data,cache, and dalvik after flashing another new rom. How could I revive this? thanks please!
Click to expand...
Click to collapse
I think you just wiped everything with system OR you just cross flashed different ROM into your system. That means you are bricked!
As you already bricked your phone, you should try flashing custom ROM.
Try below steps;
DO IT AT YOUR OWN RISK
A] Install drivers USB VCOM Lenovo A800. (Link below)
http://d-h.st/3ib
B] Download ROM (Link below)
http:// mobilecon. info/wp-content/plugins/download-monitor/download.php?id=Download+Lenovo+A800+Stock+ROM+%28official+version%29+
(Delete spaces)
Extract LenovoA800_S133_121213I.rar2.Inside extract folder you`ll see 4 rar file
1.A800_Customized_SP_Flashtool_20121022(v3.1238.5).rar
(this is a flashtool for flashing ROM)
2.apdb.rar
3.modemdb.rar
4.target_bin.rar
Extract A800_Customized_SP_Flashtool_20121022(v3.1238.5).rar
Extract target_bin.rar
Go to A800_Customized_SP_Flashtool_20121022(v3.1238.5) extract folder
Run Flash_tool.exe
Click Scatter loading, then go to target_bin extract folder
selectMT6577_Android_scatter_emmcPCext, turn off the device
Remove the battery, sdcard and sim card
Put back the battery
Click Firmware Upgrade in Flash Tool
Connect A800 to PC/laptop
Wait until all installation process done, if it success then Green logo will appear
Remove your device from PC/laptop
Turn it off
Put back SD card and sim card.
Then turn on, at first loading after flashing ROM A800 will took more time just wait.
Done!
If you found this helpful, there's a thumbs up button (thanks button) just press it
Regards,
hitman-xda
DUDE YOU ARE GOOD!!!! I would make accounts to fill your thanks meter lol! btw, can I retry to flash roms again? Thank you very much, you saved me!
helpplease123 said:
DUDE YOU ARE GOOD!!!! I would make accounts to fill your thanks meter lol! btw, can I retry to flash roms again? Thank you very much, you saved me!
Click to expand...
Click to collapse
You can flash ROMs through flashtool as many times as you can. Just make sure you flash correct ROM.
It formats everything that is already into your system and clean install ROM.
Hope you succeed well
I just installed the rom I was attempting before it bricked, now it's better and successful (in twrp though). BIG THANKS TO YOU MAN!!
helpplease123 said:
I just installed the rom I was attempting before it bricked, now it's better and successful (in twrp though). BIG THANKS TO YOU MAN!!
Click to expand...
Click to collapse
See you next time buddy
I also have this promblem one time

Heeeeelp: Stuck at Samsung Logo

Hey guys, I really need your help
I think I bricked my SGS II I9100
It was running latest RRemix and I wanted to try AICP. Installed latest version AICP, Aroma OpenGapps and IsoRec. It stuck at bootanimation, so I installed CM12.1 and IsoRec.Then I shut the phone down, as it was out charge. Later when I turned on it's not booting the ROM showing only Samsung SGS2 logo. I can't access neither recovery nor Download mode. I really need help.
Please any suggestion would be welcome
Muhammadsoli said:
Hey guys, I really need your help
I think I bricked my SGS II I9100
It was running latest RRemix and I wanted to try AICP. Installed latest version AICP, Aroma OpenGapps and IsoRec. It stuck at bootanimation, so I installed CM12.1 and IsoRec.Then I shut the phone down, as it was out charge. Later when I turned on it's not booting the ROM showing only Samsung SGS2 logo. I can't access neither recovery nor Download mode. I really need help.
Please any suggestion would be welcome
Click to expand...
Click to collapse
No download mode sounds like no hope
Maybe an usb-jig can revive ur device but i have no knowledge about using one.
Ur sure the cm12 flash process finished before u shut down the phone? Neither recovery nor download mode sound like a failed or incomplete flash
Anyway,
good luck, Chillmann
Chillmann said:
No download mode sounds like no hope
Maybe an usb-jig can revive ur device but i have no knowledge about using one.
Ur sure the cm12 flash process finished before u shut down the phone? Neither recovery nor download mode sound like a failed or incomplete flash
Anyway,
good luck, Chillmann
Click to expand...
Click to collapse
Sorry I forgot to inform that I have already solved the problem. Yeah I was going to use jig
(I'd be glad if someone could order that for me)
Problem was with IsoRec.
If 3.x.x is installed after LP ROM the phone is stuck at logo
Solution: VolDwn+Home+Pwr keys should be hold until phone boots to Download Mode
Do you have an acces upon recovery?

Boot problem (Bricked?) Alcatel Pop 4 (5051x)

Good afternoon. I tell my problem.
Upon receiving mobile I decided to apply some improvements on your Android 6.0 system.
The first thing I did was root with Kingoroot, install Flashify to change the recovery; I do around here because they seem to have any accessible recovery. Once I install Titamium programs such as backup and Xposed and everything worked perfect.
I made a backup with recovery installed TWRP 3.0.2-0, a microSD 64 Gbytes and try to check it and restore the copy appears the message "Error extractTarFork () process ended with error: 25".
Since then switched on, enters a loop with minimal screen flash, short vibration and so on cyclically. I have made several attempts:
- I enter recovery (vol + power on) and try to install roms from PC with recovery sideload with adb sideload, but the downside is that I can not find any specific rom of this mobile and other snapdragon 210 Roma does not work.
- Another method was through Mobile Upgrade Q - Alcatel Mobile Phones, put it in Download mode (power on + vol up + vol down) in coming, but when connected to the USB computer when leaving the Download mode and enters the same loop described above.
I would be grateful for any help or idea they could think of. If someone could get a rom of this mobile in zip to install through sideload adb I think it would be the ultimate solution.
Thanks in advance.
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
I tried with Mobile Upgrade Q
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Hello bro
Can you help me get these partitions please?
PM is bor working for me, don't know why, tried to pm you already
luispelau said:
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Click to expand...
Click to collapse
Hi if u have twrp, installed I could send u backup of my pop 4
I had the same problem and I managed to unbrick the phone by using this solution I found on XDA.
Go into TWRP recovery. Then click on Advanced. Then click on Terminal and type
echo SYSTEMLESS=true>>/data/.supersu
After that flash SuperSu and reboot the phone. It bootloops once, but after that it boots normal again.
Need help? T.me/pop4uk
mygadgetgeek.com said:
Hi if u have twrp, installed I could send u backup of my pop 4
Click to expand...
Click to collapse
Hey bro, could you send me a backup, i accidently wiped the system and i cant find any stock rom out there, im desperate pls
KieranFoot said:
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
Click to expand...
Click to collapse
Hi,
i know its old but i need the Nonhlos.bin (modem) for 5051x marshmallow. can you please post it here ?
it would be a great help. thanks
Yeah I have a 5051X And its boot freezing not looping should I start a new thread or this gonna need a recovery image like in the OP. I have contacted alcatel supoort to see if they have the flash image but its sunday and I expect that they are closed.
I followed some instructions re rooting my 5051X which involved installing kingroot, obtaining temporary root then using flashy to flash twrp recovery onto the device, I could never update the recovery image and I assume thats because I havn't unlocked my phone yet.
Went to remove kingroot and find it cannot be uninstalled.
So i paid for Supersume (https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en) and ran that to remove kingroot(i'll prolly reinstall later to follow the guide but dont really trust the application after my lockscreen changed on its own).
Supersume seemed to complete successfully.
Then I decided to reboot the device to see if root had disappeared again after reboot but am now stuck at the alcatel screen for the last 10 mins. Looks like i'm gonna have to pull the battery to shut it down, shame I only had it around a week.

boot loop flare s play

anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?

HELP: Screen replacement and phone stuck at Mi logo

I replaced the broken screen on my Kenzo and now it's stuck at the Mi logo. Funny thing is the technician said when he disconnects the touch ribbon it boots normally (but obviously with no touch) and locks up with Mi logo when it's connected. I've read that the mtk and sd screens are interchangeable so I don't think that's the issue. I don't have access to another screen so I have to make do with this one anyway.
I bought the phone from Gearbest two years ago and it came with the vendor rom which I never changed. I'm suspecting the vendor rom has something to do with it and now is the perfect time to flash a new rom before I sell it. Only problem is I have no clue how to flash a rom. I can get it to the fastboot screen but that's it.
Could someone please help me but in plain laymans English? Flashing for Dummies kind of thing. I've been a member here a while but haven't grasped the lingo or their meanings yet.
Thanks in advance.
Hooow?! said:
Google miflash
And download it.
Also download the latest miui developer rom
http://bigota.d.miui.com/8.1.25/miui_HMNote3ProGlobal_8.1.25_16348801ef_6.0.zip
Search for EDL.zip from xda itself and follow the instructions to get to edl mode from fastboot mode( to see if it's in edl mode check for the red blinking status LED when connected to the pc)
Now open miflash as administrator connect your phone to the PC.
Miflash should see it as something like COM..
Now extract the developer rom and in miflash browse for the extracted direvtory
At the bottom right select clean_all lock.bat and then press flash..
After few minutes the flashing should get completed and then hold the power button on the phone until u see the mi logo.
Wait for the booting to get completed and then setup the phone..
Congratulations you bow have a working phone again.
Click to expand...
Click to collapse
Thanks for the help. Well I got it all the way to flash in edl and around 9% it gave an error message "Object reference not set to an instance of an object" or something similar. So it basically failed. What can I do? I'm almost there
Hooow?! said:
Google some fastboot commands to erase partitions...
It should be something like this
fastboot erase boot
fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
First go to fastboot mode by holding vol down and power together .
Then connect to PC and then install minimal adb and fastboot kit. Then open the shortcut in desktop and then type fastboot devices and check if u device is there or not. If yes then copy and paste the commands above and then repeat the EDL flash procedure.
Click to expand...
Click to collapse
This is depressing. I followed your instructions and used the command "fastboot format partition" as that's the only one that would work and was suggested in options. The result was "failed device locked". :crying::crying::crying:
Yep. Same result. Does the bootloader have anything to do with all this?
Any ideas why it would boot normally with the touch ribbon disconnected but bootloop when connected? I'm beginning to wonder if flashing will even work.
WELL!! My phone is suddenly working. After trying all sorts of flashing methods I put it on the charger this morning and just took it off and it's working perfectly.
What happened was I read another thread about flashing the Global rom with a locked bootloader. At the very end of the instructions and almost as an after thought, the author mentioned that you must boot the phone into recovery in order to clear the cache etc otherwise the phone will be stuck on the Mi logo. It sounded similar to my problem so I did volume up and power key together and the Mi logo came up. Thinking nothing had changed I did volume down and power and went into fastboot. Again nothing changed. So I switched it off, put it on the charger and left it for about 4 hours. I just took it off the charger 20 minutes ago and it was working perfectly.
Perhaps someone can explain what the heck happened? Meanwhile I'm selling it pronto. Lol
Twotems said:
WELL!! My phone is suddenly working. After trying all sorts of flashing methods I put it on the charger this morning and just took it off and it's working perfectly.
What happened was I read another thread about flashing the Global rom with a locked bootloader. At the very end of the instructions and almost as an after thought, the author mentioned that you must boot the phone into recovery in order to clear the cache etc otherwise the phone will be stuck on the Mi logo. It sounded similar to my problem so I did volume up and power key together and the Mi logo came up. Thinking nothing had changed I did volume down and power and went into fastboot. Again nothing changed. So I switched it off, put it on the charger and left it for about 4 hours. I just took it off the charger 20 minutes ago and it was working perfectly.
Perhaps someone can explain what the heck happened? Meanwhile I'm selling it pronto. Lol
Click to expand...
Click to collapse
Just dont sell it yet use some awesome oreo roms best is u try resurrection remix oreo its the best with agni kernel and enjoy..... Dont sell the kenzo man just enjoy the roms u can unlock bootloader unofficially which is far better and easier than official one and then flash twrp enjoy the phone
Androbots said:
Just dont sell it yet use some awesome oreo roms best is u try resurrection remix oreo its the best with agni kernel and enjoy..... Dont sell the kenzo man just enjoy the roms u can unlock bootloader unofficially which is far better and easier than official one and then flash twrp enjoy the phone
Click to expand...
Click to collapse
Lol. Nah, I already have a Mi Mix 2 which I'm loving. This old faithful has to go.

Categories

Resources