My laptop has:
1) AMD Athlon QL-62 dual core 2.00 Ghz
2) Nvidia 8200 mg 256 mb VRAM
3) 3 GB ram
4) Broadcom Wireless driver
It has a weird thing that occurs in remix, Phoenix and Android x86. After some time the laptop suddenly 'dies', it freezes completely without any input or output changing and ALT+SHIFT+F1 doesn't open the terminal. It only will work after hardware reset. In Android X86 Marshmallow specially, it doesn't occur if the Wifi isn't connected as my wifi card doesn't always load upon boot.
How can I debug the issue? If it's Wifi related or video card related how can I debug it?
Thanks!
Related
Hi, sorry for making my first message here with a problem.
I have a Woxter Android TV 200 ("spanish" version of Noontec A9 - RK2918, 512MB RAM and GC800 graphics). This android-PC had 2.3 for default and the company doesn't provide any higher.
So, searching, I found that Noontec A9 is similar and it has a 4.0 ROM . I flashed it with RK Batch Tool without problems, BUT... when I did the root (I did with a .bat and adb), in one step ("enabling emulator hack"), then it rebooted again... It didn't work. When I turn on it, it shows the penguin of Linux and nomore...
It doesn't turn on properly because I can't see it connected to my wifi router. It hasn't any button, only 2 USB, 1 SD Reader, 1 HDMI-out and 1 RGB out.
Please, help me :crying:
Im installing remix os on my pc using easybcd everything is fine and i did the correct step by step.. and after reboot i choose resident mode, screen flashed like 2second and my montor lose the signal (black screen) like on the screenshoot.. pls helpp
Spec : intel i5 4460 / gtx 970 / 8gb ram / os installed on ssd 120gb
This is related to nVidia I believe because you have spec of GTX970 ....it's documented somewhere, try searching
Im using netbook its called SMK Zyrex B10 which is kind of low end,
here is the spec
- Processor Intel Atom N455 1.66Ghz
- Ram 1GB - HDD 320GB Sata
- LCD 10 Wide -Intel GMA 3150
- Wifi - Camera - CR - Lan
The problem is the Remix OS 32bit 2.0 cannot find / detect the wifi. But is detectable in windows 10 or below BY pressing fn + f4 (w/ wifi logo in it) to be able to use the wifi. If isnt pressed, the windows 10 will not able to detect the Wifi.
The question is, is there any fix for this? I only know that remix can't executre .exe so it means cannot install any driver, or is there any option to permanently turn on the wifi in bios setting? Or an external device that can be the Wifi signal (i have tp link wn722n)?
Sorry if i did break any rules in here, and thanks for reading and helping.
Hello,
I've got a problem with Remix OS, when I boot on the usb (that I made with their tool) and then select persistent or guest mode, the result is the same, a weird screen appear with random colored pixel blinking everywhere and nothing happen...
I also tried to install it adding "INSTALL=1 DEBUG=" in the command line and the installation worked, but when I tried to boot on it the result was again the same.
Here is my computer :
Motherboard : G41m Combo
CPU : intel core 2 quad Q6600
GPU : Nvidia GTX 650
Ram : 4Gb ddr2
USB key : Rival 8Gb usb 2.0
See:
http://forum.xda-developers.com/remix/remix-os/solution-problems-booting-remix-os-dual-t3466027
Howto disable the onboard intel gpu...and force Nvidia gpu
It might work or not... goodluck
Ok thank you,
I put the commands in the kernel line and now there is no more weird pixels but there is a white underscore on the top left-hand corner and nothing happen...
So, finally I've give up and try to install Pheonix OS and it's work
Hi!
I have a Dell Inspiron 15 7559 laptop with Intel Core i5 6300HQ CPU, Intel HD Graphics 530 and nVidia Geforce GTX 960M GPU.
I tried some Remix OS install on hard drive and have a cpu problem: 1 cpu core with 100% load, which make total cpu load always greater than 25%. And i can't shutdown or restart the computer too.
So i tried Phoenix OS too. Phoenix OS don't make my CPU load > 25% all the time, but every time i try to restart or shutdown computer, the problem happen.
I did some research and found this thread: https://forum.xda-developers.com/remix/remix-os/remix-os-updated-to-kernel-android-x86-t3596789. Maybe replacing kernel can fix the problem. With that idea, i was trying to replace the kernel of Remix OS => result: cpu problem gone, can shutdown, restart computer normally but wifi not work. Open setting, in OpenGL driver version, i notice the "GL Renderer" change to "Gallium...", not "Intel Skylake.... " anymore.
After that, i tried the modify Remix OS in this thread: https://forum.xda-developers.com/remix/remix-os/remixosx64-uefi-legacy-xposed-supersu-t3525993. Can boot but only show wallpaper and cursor, nothing else. Do some experiment, then i decide to replace "egl" folder in "lib" and "lib64" folder inside "system.img" with folder in the original Remix OS iso. Okay, the system finally working, but cpu problem happen again. Open setting, both kernel and Mesa driver updated to newer version but that not fix the cpu problem.
Now i'm out of idea. Anybody, please help! :crying::crying::crying: