Related
How to root please?
Also, anyone know how to reflash this models firmware?
I think I stuffed 1 of them up trying to root.
Attached is a picture of the model.
Thank you. Have a nice day.
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Spreadtrum SC6820
ElectronikHeart said:
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Click to expand...
Click to collapse
Hi there, I recently got my hands on a Mobicel Titan, and after much unclear research, the best I can come up with is that it is a Spreadtrum SC6820a phone, hope I am on the right track. Anyway, my goal is to change the ROM on this phone as the software that Mobicel has bundled on their version of Android is way too much for the phone to handle. I have already rooted the phone using Z4Root successfully. Funny enough, the link you have is the very link I tried for the past week, I've tried ADB and Fastboot on both Windows 8 64bit and Ubuntu 12.10 64bit, and even ResearchDownload, all drivers were installed successfully, but when i try all methods to flash new ROM to the device, nothing seems to happen, even if I use ResearchDownload and follow instructions to the T, flash process doesn't start. After using fastboot to update CWM from Ubuntu 12.10, if I try to restart into recovery mode, it is then stuck on the Mobicel Logo. Is there a guide for the Mobicel Titan?
Hello XDA community, this is my first thread, i had never needed to post anything cause i always find everything im searching for in this awesome community... until now :crying:
Last week I got a new android device which is made by Polaroid, model: PSPR355, its a pretty low class device but I thought it would be enough for me.... then i realize I needed root permissions, for obvious reasons... easy I thought... i had rooted many devices...how hard can it be...right?... WRONG! :crying: . The first problem I encountered were the drivers..couldnt find em anywhere... fortunatelly i found a tutorial were i could install the drivers in a different way...although I took 2 days to do this...Ive been about 5 days trying to root my phone.... Ive tryied about 10 different programs with their different versions... and any of those rooted my phone, nor Oneclikroot, nor Unlockroot, etc, etc..... I really gave up trying to find something on the web cause i didnt even find the phone on its official site, so I came her defeated asking for any solution, idea, or if you want to help me with commands, a programm or anything else to root my phone, Im not even afraid of trying programming (Im trying to learn how to make roms, kernels, etc for this phone cause theres nothing on the web abou it but this is a theme for another time) if you wanted to help me i would really appreciate it, im a little desperate so anything would come useful thanks everyone and I hoppe you can help me!!! :fingers-crossed:
MecaMarck said:
If you wanted to help me i would really appreciate it, im a little desperate so anything would come useful thanks everyone and I hoppe you can help me!!! :fingers-crossed:
Click to expand...
Click to collapse
I would recommend trying the towelroot application. It can be downloaded from here, just click on the orange lambda to download the tr.apk file. Then open towelroot follow the instructions in the application. After the device reboots I would recommend downloading, Root Checker Basic form the Play Store and running that to make sure your device is rooted. Finally install SuperSU, and you should be good to go.
First thanks for answering so fast shimp208! And I guess I forgot to tell that I was in Mexico and Im using Telcel's network, I downloaded and installed the apk file but it doesnt starts I click the button pops up a black screen and then closes to the last app I used...any idea about this error...or if its beacuse of the carrier, by the way the device has Android 2.3.7 I dont know if it has something to do with this error
MecaMarck said:
First thanks for answering so fast shimp208! And I guess I forgot to tell that I was in Mexico and Im using Telcel's network, I downloaded and installed the apk file but it doesnt starts I click the button pops up a black screen and then closes to the last app I used...any idea about this error...or if its beacuse of the carrier, by the way the device has Android 2.3.7 I dont know if it has something to do with this error
Click to expand...
Click to collapse
Does it present an error message of any kind before it force closes? Try uninstalling and then re-installing the application, and if that doesn't work go to application manger under settings, find the towelroot application and select the options to clear it's cache and data. The carrier won't have any effect in this case, and with it being Android 2.3.7 your device most definitely has a kernel build date before June 3rd, 2014.
shimp208 said:
Does it present an error message of any kind before it force closes? Try uninstalling and then re-installing the application, and if that doesn't work go to application manger under settings, find the towelroot application and select the options to clear it's cache and data. The carrier won't have any effect in this case, and with it being Android 2.3.7 your device most definitely has a kernel build date before June 3rd, 2014.
Click to expand...
Click to collapse
No it simply closes without showing anything, and without even giving the "Force Close" message, i thought it was because i first installed it on the sd card, or because of not enough space but no, I moved it to the phone and uninstalled some apps I had, I uninstalled and installed towelroot twice and it didnt work, I installed the v1 of it and i got to the [make it ra1n] screen but when I click the button it closes immediately again without any error message
MecaMarck said:
No it simply closes without showing anything, and without even giving the "Force Close" message, i thought it was because i first installed it on the sd card, or because of not enough space but no, I moved it to the phone and uninstalled some apps I had, I uninstalled and installed towelroot twice and it didnt work, I installed the v1 of it and i got to the [make it ra1n] screen but when I click the button it closes immediately again without any error message
Click to expand...
Click to collapse
Very interesting, while in theory the app should work for any kernel build date earlier then June 3rd, 2014 the app many not be compatible with devices running an Android version less then 4.x.
shimp208 said:
Very interesting, while in theory the app should work for any kernel build date earlier then June 3rd, 2014 the app many not be compatible with devices running an Android version less then 4.x.
Click to expand...
Click to collapse
Yes that´s what i thought, do you think that theres no rooting method for this phone? if so, do yo think there´s a way of doing one?
MecaMarck said:
Yes that´s what i thought, do you think that theres no rooting method for this phone? if so, do yo think there´s a way of doing one?
Click to expand...
Click to collapse
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Interesting for me.,.
Sent from my LT26w using xda premium
Same Boat
shimp208 said:
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Click to expand...
Click to collapse
I'm in the same boat
I use moto-fastboot (any way it's fastboot)
#:\moto-fastboot devices
? fastboot
don't show any info...
I do a system dump in this way
#:\adb pull / c:\PSPR355
mega,co,nz/#!ThIUQYiS!LLbJ9e1-yVJI4juNlWQuPfa9GFH6HP9lr4X8Gwu1MBY
Change "," please, sorry mod if you want i can delete it! =$
klonic0 said:
I'm in the same boat
I use moto-fastboot (any way it's fastboot)
#:\moto-fastboot devices
? fastboot
don't show any info...
I do a system dump in this way
#:\adb pull / c:\PSPR355
mega,co,nz/#!ThIUQYiS!LLbJ9e1-yVJI4juNlWQuPfa9GFH6HP9lr4X8Gwu1MBY
Change "," please, sorry mod if you want i can delete it! =$
Click to expand...
Click to collapse
Unfortunately if fastboot doesn't show your device without any other flashing utility, even with the system dump there is no way to flash a rooted system image if it was created.
Got to see if this guys do the trick!
http://forum.xda-developers.com/showthread.php?t=2066041
shimp208 said:
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Click to expand...
Click to collapse
Hello shimp well I connected my device on FastBoot Mode and my computer recognized it and it installed a driver named: ADB Testing Interface I dont know if thats a good sign or what should I do, I tried entering into recovery mode but it shows only an android little guy and exclamation quote... so I think it doesnt have a recovery boot I dont know if thats relevant, Could you help with the adb dump i dont know how to get it. And.... I dont know if besides you help me with the rooted system image you could teach me how I do this.... anyways thanks a lot for helping me! I'll keep doing everything you need so we can root this device!
MecaMarck said:
Hello shimp well I connected my device on FastBoot Mode and my computer recognized it and it installed a driver named: ADB Testing Interface I dont know if thats a good sign or what should I do, I tried entering into recovery mode but it shows only an android little guy and exclamation quote... so I think it doesnt have a recovery boot I dont know if thats relevant, Could you help with the adb dump i dont know how to get it. And.... I dont know if besides you help me with the rooted system image you could teach me how I do this.... anyways thanks a lot for helping me! I'll keep doing everything you need so we can root this device!
Click to expand...
Click to collapse
Since your computer recognizes the device and installed the driver and shows the device when in fastboot mode that's a good sign. The Android with the exclamation point is part of normal stock Android system recovery, it just means that the recovery menu has been hidden (You should be able to get the menu to appear by pressing the power and both the volume buttons in recovery mode). To dump /system run the following command:
Code:
adb pull /system
Then please send me a link to the /system dump, from there I will make a rooted system image.
Factory Rooted??
Hey guys I'm new to this so I may be wrong but has anybody thought to check if the Polaroid PSPR355 comes Factory Rooted??? I had a Polaroid Tablet, PID something(I forget the name), which I tried for hours to root resulting in: bootloop, hard reset, root, bootloop, hard reset, root, bootloop, hard reset, about to give up. So I Googled how to root Polaroid PID something (again, I forget the name), and I come to a post somewhere(forgot that too) that tells me my Tablet and similar Polaroid electronic devices(as well as most electronic devices coming from China) are factory rooted due to some Chinese law. So after the last hard reset, I downloaded HowToRoot App to check if my Polaroid Tablet is, in fact, rooted. I press the little lock button(root checker) and I find that, to my surprise, my Polaroid Table is in fact rooted. So all I had to do was download SuperSU from Google Play Store and Update Binary when prompted and I was Super User. Don't know if this helps but it worked for me.
Hi guys, i really hope you can help me, i m so deseperate...
After OTA Update my CATERPILLAR S30 bricked into bootloop, i can access to the stock recovery (wipe data/factory not fix it) and bootloader show me ; "DC CHECK"
I read that it could be my bootloader (emmc) wich it's corrupted...
The chipset is a Qualcomm Snapdragon MSM8909, of course USB debugging is disabled and i can't find any stock rom, backup for this phone....
Please HELP ME...i work hight in the mountain and if i cant communicate it will become....quite dangerous for me...
If someone has a backup (EU AREA), a stock rom or any solution for me ill be gratefull
Bye
Nobody can upload me OTA file (wich i ll .zip), boot.img, backup or any kind of solution please...?
AnY-One said:
Nobody can upload me OTA file (wich i ll .zip), boot.img, backup or any kind of solution please...?
Click to expand...
Click to collapse
What software version are you on?
Chuggers said:
What software version are you on?
Click to expand...
Click to collapse
Hello there and thanks helping me...
I'm AnY-One but i can't log in with; i dont know why...
I dont know what is my software version i only can say to you that the last update i tried to install came about 10-12/01 (EU France) and i bought this phone the 24/12 and i already did a first update.
So my phone stuck in bootloop (Qualcomm HS-USB QDLoader 9008 recognized) when i tried to install the 2nd update 10-12/01 so...
I have all qualcomm developpers tools with qualcomm flash utility and i can access to stock recovery...perhaps just a boot.img should work...
Pleassse help guys...
"and...as you can read; SORRY FOR MY ENGLISH"
---------- Post added at 05:32 PM ---------- Previous post was at 04:52 PM ----------
an update.zip that i can flash from recovery should be welcome
---------- Post added at 06:19 PM ---------- Previous post was at 05:32 PM ----------
Got it, i think software version (viewing in recovery mode) is LTE_D0201121.0_S30_0.017.01
Zi0nlive said:
-snip-
Click to expand...
Click to collapse
Is warranty not an option?
nagalun said:
Is warranty not an option?
Click to expand...
Click to collapse
it is but it takes time...and i like to fix my mistakes by my self...
Have you a solution for me? can you upload the OTA files or a backup rom .zip?
Zi0nlive said:
it is but it takes time...and i like to fix my mistakes by my self...
Have you a solution for me? can you upload the OTA files or a backup rom .zip?
Click to expand...
Click to collapse
You can access recovery?
Usually when you see "Qualcomm HS-USB QDLoader 9008" it is because the phone can't load the bootloader (bios), so I am a bit confused about the state of your phone.
You likely need more files than the OTA has.
nagalun said:
You can access recovery?
Usually when you see "Qualcomm HS-USB QDLoader 9008" it is because the phone can't load the bootloader (bios), so I am a bit confused about the state of your phone.
You likely need more files than the OTA has.
Click to expand...
Click to collapse
That's a good question ; yes i can access to QDloader HS-USB 9008 with qualcomm drivers ; I CAN ONLY acces to
recovery holding VOL+ then plugin in USB. Phone off then : POWER + VOL+ doesnt boot recovery.
Wipe Data/factory seems to work, adb sideload; device is regognized in adb shell but most of commands answer are: "FAILED (remote: unknown command)" when i choose reboot in bootloader it's the boot screen with 'DC CHECK MODE' left corner..
Is there someone reading me who has the same phone?
Is there someone able to upload me .img (system, boot ...) that i can flash with QPST Tools? Stock Firmware? Nandroid Backup?
Is there someone who can guide me to repair that phone stuck in bootscreen? I think the problem come from my stupidity fogetting to unroot (Kingoroot apk replaced by SuperSU) before OTA update.
How extract my proper firmware
Hello
How extract the om from the device
Help Me
Same problem...
I have the same problem too... Please help
sharing my experience in a similar quest
Hello ! You probably must have resolved the issue by now. Like you, I too had a similar issue ( Reliance Jio Lyf Wind4 - Haier L51)
In my nooby quest for a solution have made some progress. The learning is:
One needs : Mprg8909.hex, 8909_msimage.mbn, rawprogram0.xml, patch0,xml to recover.
If you can get hold of a phone similar to yours, you can dump all the partitions. That can then be used to get the required information to make your unique rawprogram0.xml. The process of dumping becomes very easy if the phone is root and you are running an insecure boot. Using basing Linux commands like fdisk,gparted,proc you can get and idea of your partition details. The dd command will help you dump the partitions.
Yes the tools to use is from the QPST suite or look for the stand alone emmcdl.exe
As your phone is showing the QUSB 9008 mode you need to be able to switch the phone to Emergency Download Mode after which you can use MIflash or similar tool to flash the ROm from the dumped images. Thats where the rawprogram0.xml comes in. It details partition information required to revive the phone.
Havent succeeded yet, but am feeling encouraged. Probably need to resolve syntax errors creating the rawprogram0.xml and figure out if just this much is enough to switch the phone to EDL.
After lurking here for months, this is my first post, therefore I request indulgence in case I have inadvertently erred
TooSour
AnY-One said:
Hi guys, i really hope you can help me, i m so deseperate...
After OTA Update my CATERPILLAR S30 bricked into bootloop, i can access to the stock recovery (wipe data/factory not fix it)
and bootloader show me ; "DC CHECK"
I read that it could be my bootloader (emmc) wich it's corrupted...
The chipset is a Qualcomm Snapdragon MSM8909, of course USB debugging is disabled and i can't find any stock rom, backup for this phone....
Please HELP ME...i work hight in the mountain and if i cant communicate it will become....quite dangerous for me...
If someone has a backup (EU AREA), a stock rom or any solution for me ill be gratefull
Bye
Click to expand...
Click to collapse
You will need:
Hi
I have a similar issue with a different phone (Reliance LYF LS 5014 - a.k.a. Haier HL-L51) Service centres will claim that the motherboard needs to be changed (and charge you an arm and a leg ;p) Even if you get the firmware image it wont help. Thats becuase if you are bricked and in the QLoader 9008 , you first have to get the phone in EDL (emergency download mode) only then can you use MI Flash et al to flash your ROM.
The route I am taking is as follows: got hold of a similar phone and dumped all the partitions using the dd command. Then getting hold of all partition information using gdisk/parted/df et al This is so that I can create a partition.xml. From this I could run a Python script ( PartitionTool.py) to get rawprogram0.xml, patch0.xml. Using emmcldl and partiton.xml I can create the 8909_msimage.mbn . Hopefully, armed with these and QPST /Miflash I should be able to revive my phone. I have read that one needs the mprg8909.hex to kick the phone into EDL but am not convinced that without it I will remain stuck. That file seems to be guarded like a state secret by phone manufacturers.
ALl this I have learnt the hard way over almost a fortnight. I confess that I do fall into the "noob" category and cant program/develop to save my life. Therefore it should be easy for anyone with the right amount of enthu
Cheers
Zi0nlive said:
Is there someone reading me who has the same phone?
Is there someone able to upload me .img (system, boot ...) that i can flash with QPST Tools? Stock Firmware? Nandroid Backup?
Is there someone who can guide me to repair that phone stuck in bootscreen? I think the problem come from my stupidity fogetting to unroot (Kingoroot apk replaced by SuperSU) before OTA update.
Click to expand...
Click to collapse
on continuing my quest for a solution
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Vonageext4ts said:
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Click to expand...
Click to collapse
1. Why can't you go to the Rjio service center and get it flashed? Just tell them it got screwed after an update.
2. How did you manage to root the phone? Mine is Flame1 which has same MSM8909 chipset.
I am very not happy with the stock ROM but I don't think anyone has come up with a custom ROM for this cheap chipset.
I have bricked my CAT S30 too. Is there someone who have a solution? Or can somehow make a ROM copy so I can somehow flash it to the phone? I made a lot of searching and can not figure out how to make the phone work again.
hello I need firmware for S30 because I lightened too much after the root and I deleted something I should not, is now locked in the home screen CAT, but I can get into fastboot and bootloader.
thank you guys
file for CAT S30
Hello
I purchased another CAT S30 which has just lit downloaded a system update and I extracted from the cache, now the load so you can work on it.
if you need other things tell me how can I copy them from working phone.
my I crashed after I canceled the DownloadProviderUi.apk files and perhaps I put not compatible. now I can only access the fastboot or DC CHECK mode.
I tried to flash the .zip program but by mistake, I tried to flash the update and installs it by error although it says it has been installed, and still does not start, remains in the white screen CAT
https://www.dropbox.com/s/trqfxvnp90qt8vn/__FUMO.zip?dl=0
Vonageext4ts said:
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Click to expand...
Click to collapse
Hi.. i have a CAT S30 stuck in logo, how i can use your file? thanks
Hi got this same phone only two weeks ago, and broke it trying to root it, got stuck on Bootscreen, however I found an unofficial rom for the device, loaded into an SD card and applied via recovery and boom, its a working phone again.
If you still need help, let me know so I send you a link to the ROM.
I installed GLTools for the 5th time, I have never had any issues with it before.
Suddenly this time I installed the version of GLTools on XDA forums(this forum!), the phone turned off afterwards, had to manually turn it back on, now it just sits at the Alcatel Boot logo!
I can access the phone with ADB when its turned off and do adb shell, su, with success. Now how can I remove GLTools and restore the phone to normal useage!?
Please somebody help me here, If i get it working again I will never use any software thats not straight from Google Store again!
Please help!
phenom2955 said:
I installed GLTools for the 5th time, I have never had any issues with it before.
Suddenly this time I installed the version of GLTools on XDA forums(this forum!), the phone turned off afterwards, had to manually turn it back on, now it just sits at the Alcatel Boot logo!
I can access the phone with ADB when its turned off and do adb shell, su, with success. Now how can I remove GLTools and restore the phone to normal useage!?
Please somebody help me here, If i get it working again I will never use any software thats not straight from Google Store again!
Please help!
Click to expand...
Click to collapse
get aroma file manager.
go 2 recovery
mount system
flash aroma recovery file mgr
navigate to root/data/app And delete gltools.
go to data/data/(gltools folder) and delete it.
Then go to root partition and delete all 3 texure plugins.
U r done.
possible issue : maybe u messed with the system partition or plugins of latest gltools isn't compatible.
How do i do that if i cant boot the phone?
Please man I am begging you, need to fix this. Cant have another brick on something stupid.
I dont have a custom recovery since there was not one available for my phone. Alcatel OneTouch Fierce XL. Can't I delete the files with adb commands?
You know what happened. I Attempted to try an older version of GLTools 1.97 ealier to see if it would work better to clear up performance of a game, I got rid of that. Then today I went ahead to reinstall 1.99. I suppose the driver files were still installed and are conflicting?
How can I delete them with ADB commands? I have SU access in ADB, just need to know the proper commands and directories to reach and delete the proper files?
phenom2955 said:
How do i do that if i cant boot the phone?
Please man I am begging you, need to fix this. Cant have another brick on something stupid.
I dont have a custom recovery since there was not one available for my phone. Alcatel OneTouch Fierce XL. Can't I delete the files with adb commands?
Click to expand...
Click to collapse
sure.. u can do it with adb too.
but i don't know the process.
Better u ask t3snake in gltools thread.
Hope he will help u
Great now windows applied an update and now my phone is unauthorized! Please tell me I can roll it back and it will be Authorized again?
****ing great now becuase windows updated itself it is unauthorized and I am ****ed.
phenom2955 said:
****ing great now becuase windows updated itself it is unauthorized and I am ****ed.
Click to expand...
Click to collapse
@T3snake
a issue here..
yea think, as if windows had it all plotted against me.... itnt that wierd?
phenom2955 said:
****ing great now becuase windows updated itself it is unauthorized and I am ****ed.
Click to expand...
Click to collapse
If u didnt know It means ur computer isnt authorized anymore(u have to do it after enabling usb debugging for every system)
U can always flash a system.img using fastboot
yea I had authorized it and told it to remember this computer always before the phone bricked. It was working fine last night, I just didnt know what adb commands to use after adb shell and then "SU", from there I should have been able to delete the GLTools drivers if I had known the commands. Then suddenly windows decided in all its glory to update and restart, now its Unauthorized again. So I guess I am ****ed eh? I was hoping a restore point to a couple hours before windows update or rollback the update would set the PC to the same state when It was still authorized, but no Dice huh?
I dont think my phone has a fastboot, the only button combos that work are Power+VolUp, brings up a stock recovery with only 4 options, Restart Phone, Factory Reset, Wipe Cash, and Power down. Thats it.
God this is such bull****, Next droid device I get I am locking down 100% as much as can get and not using anything on it but a few basic apps from GooglePlay.
Thanks anyways though.
Hi guys.. my mom got today as gift a tablet from a company, it came with bad soft, then i tryied to root it, to uninstall it, but i cant, was unabled to deactivate or uninstall
then i tryied to uninstall it
i tryied with
oneclickroot
kingo root
didnt work, then i tryied to do things with ADB
i tryied to install twrp first with another software, and then it failed, and i had to use ADB, to try to install again a recovery, because i guess i erased everything and im only in " fastboot option "
then i go to my computer, enabling fastboot mode, and i tryried many things all the day with ADB console
adb devices
fastboot flash boot.img recovery.img
and commands as that, tryied a lot of differents twrp imgs, and i always ended in a 5 seconds loop restart " orange state "
then i dont know what more to do, before tryied to root, i took some screenshots of the system
was
coradir c01
board: C01
CPU ABI arm64-v8a
display c805.m.v20.16.qptc-v05.2260
hardware mt8163
host: roco-mtk-svr3
ID: mra58k
Manufacturer CORADIR
model C01
Product C01
SERIAL: 0123456789ABCDEF
32 bit abis armeabi-v7a, armeabi
64 bit abis arm64-v8a
TAGS test-keys
type: user
user: chenhao
and in the other image
CPU; aarch64 processor rev3 (aarch64)
GUID 03021718011806094400330431907574
what can i do?
i tryied a lot of things for near 12 hours, i cant anymore, maybe i will continue yesterday, but im trying to do this post to get some help
you know, is my mom, and that application already installed in the app, were invasive, i have some screenshots of what wanted that apps to be allowed to do, i didnt trust, then i did this
i didnt expect fail doing the twrp installing
thanks guys..
update 2
i got more info from my device, a picture from the android recovery
it says
alps/full_joyasz8163_tb_m/joyasz8163:tb
6.0/MRA58K/1503555540
user/test-keys
and i found this web page with that info, but i dont know what to do
cant put the link
Hola!
Hi, could you solve this problem? I have the same inconvenience also with a coradir c01 that I want to flash with a normal rom but I can't find anything anywhere.
fedezappa said:
Hi, could you solve this problem? I have the same inconvenience also with a coradir c01 that I want to flash with a normal rom but I can't find anything anywhere.
Click to expand...
Click to collapse
Hi folks, have you been able to solve this problem? I have the same problem with the same device, and cannot find the correct ROM. Thank you.
@mijailballack
the device in question is based on a MediaTek chip, hence you have to use SP flash tool made by MediaTek Inc. to flash and to use the USB-driver offered by MediaTek.
Bump
have similiar problem with Betterspace IQTAB, did any1 found rom for this device?