{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Your warranty is now void. I am not responsible if your phone turns out into a high-tampered mutant or a brick. Do some research if you don't have any experience in flashing ROMs as you will be needing it. You are choosing to flash my build yourself, I have not compelled you to. If you ever say I am responsible for anything happening to your phone, I will just sit back and party.
Development of this ROM has been shortly halted due to maintenance of Resurrection Remix, I am not able to work much on this ROM. Sorry for inconvenience. It will be continued soon.
These builds are based on Sultan's CM13 which are one of the most stable branches of ROM builds and fully optimized by him. Custom Kernels are not supported (You may flash them on your own risk). If you want to get notified on new builds, You are always invited on telegram channel
ROM Features:
All Sultan's CM features and patches included (Source)
PAC customizations
Sultan's Kernel included
Default DPI set to 400
Kernel Features: (Source)
Based off latest CAF Marshmallow kernel source from Qualcomm (LA.BF.1.1.3_rb1.13)
Removed lots of excessive bloat
Rewrote battery driver (for the BQ27541 fuel-gauge chip; battery % readings are more accurate, there are various
safety mechanisms now, and you may get better battery life)
Rewrote half of the Synaptics touchscreen driver (over 2500 lines of code modified; your touchscreen may work better)
Newest-available Synaptics touchscreen firmware
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
CPU underclocked to 1958MHz by default (you can disable this; see why I did this in the FAQ in the 3rd post)
Vibrator is automatically disabled when recording videos (so the buzzing noise doesn't get in the videos)
Custom thermal control driver I wrote myself (features 8 thermal throttle steps; keeps the phone cool)
LCD KCAL by Savoca
Westwood TCP congestion algorithm (enabled by default)
F2FS support
NTFS support
No placebo patches, features, or compiler "optimizations"
Many other misc. improvements not listed here
Download Link: Download
Installation Instructions:
1.Make a nandroid backup of your device using TWRP (which you may use to restore later if something goes wrong)
2.Wipe: System, Data, Cache and Dalvik-Cache partitions
3.Install the ROM
4.Flash GAPPS (BaNkS GApps RECOMMENDED)
5.Optional: Flash SUPERSU if you want to root your device
5.Reboot the device
Bugs:
Audio not working for media (Will be fixed in next update. For temporary fix, flash this : link)
You tell me (Provide logcat)
Note: If you get any error during installation, download the latest release for CM13 and flash it before flashing my build
Kernel Source:
Kernel (cm-13.0-caf branch): https://github.com/sultanxda/android_kernel_oneplus_msm8974
Screenshots:
View attachment 3797255
Credits:
Cyanogenmod and its contributors
@deletescape
@Daniel Kng
@King_lilrowrow
@gautamhans1
CAF
myfluxi
69gm
Open Gapps
PAC ROM Contributors
@Bongofriend : for helping me in fixing camera
Contributors
@tusharjain95
@romilparh
@Sultanxda
ROM Version : 6.0.1
ROM Kernel : Linux 3.4.x
Based on : Sultan's CyanogenMod 13
Status:Alpha
Please provide Logcats for any bugs. I don't own a OnePlus One.Testers can reach me on telegram personally on username: indianbatman
Nice! Thanks!
jbw716 said:
Nice! Thanks!
Click to expand...
Click to collapse
Welcome, Sir.
screenshots and good work bro !
Hi! Is it completely based off CM sources?
Nice, finally a custom rom based on sultan's kernel. It would be hetter if you include more screenshots of the rom ?.
Just a question, what camera blobs has?
abhibnl said:
Hi! Is it completely based off CM sources?
Click to expand...
Click to collapse
It is based off Sultan's CM sources
mustang_ssc said:
Nice, finally a custom rom based on sultan's kernel. It would be hetter if you include more screenshots of the rom ?.
Just a question, what camera blobs has?
Click to expand...
Click to collapse
More screenshots on way. Camera is from Sultan's ROM. It is normal Sultan's blobs
romilparh said:
It is based off Sultan's CM sources
Click to expand...
Click to collapse
Well i still have one doubt. Is it a rom based on PAC-MAN rom sources (i know in Kitkat days there used to be a Pac-Man rom team) with Sultan's device blobs, and kernel, Camera etc. or is it toally Sultan's CM13 sources with added customizations? I hope that makes sense.
abhibnl said:
Well i still have one doubt. Is it a rom based on PAC-MAN rom sources (i know in Kitkat days there used to be a Pac-Man rom team) with Sultan's device blobs, and kernel, Camera etc. or is it toally Sultan's CM13 sources with added customizations? I hope that makes sense.
Click to expand...
Click to collapse
Sultan's blobs have nothing to do with the ROM.The Device tree only adds Device specific things - Kernel, Drivers, etc. It's my ROM
romilparh said:
Sultan's blobs have nothing to do with the ROM.The Device tree only adds Device specific things - Kernel, Drivers, etc. It's my ROM
Click to expand...
Click to collapse
Thanks! Could you please add SS of the available features?
Sorry for being a little off topic but...
I saw this post in the oneplus news channel of Telegram and thought it would be for op2 and now I saw that it's for the op1
Will this ROM be available for the oneplus 2 someday?
Sent from my ONE A2003 using XDA-Developers mobile app
Flashed and running smooth. Going to test it out!
defy01 said:
Sorry for being a little off topic but...
I saw this post in the oneplus news channel of Telegram and thought it would be for op2 and now I saw that it's for the op1
Will this ROM be available for the oneplus 2 someday?
Sent from my ONE A2003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, No. Sultan's device tree is only available for OnePlus One
voodooline said:
Flashed and running smooth. Going to test it out!
Click to expand...
Click to collapse
Logcats for bugs.
Smooth so far No major bugs. Keep it up!!
rajatkumar6393 said:
Smooth so far No major bugs. Keep it up!!
Click to expand...
Click to collapse
Thanks
Hey, i was just wondering if this is the Official PAC-MAN ROM or Unofficial and as far as i know 'PAC-MAN' cannot be used to name a ROM anymore because it infringes the copyright of the company. I saw this the last time a thread named PAC-MAN was made so i thought of telling you. Cheers!
horizon_KJ said:
Hey, i was just wondering if this is the Official PAC-MAN ROM or Unofficial and as far as i know 'PAC-MAN' cannot be used to name a ROM anymore because it infringes the copyright of the company. I saw this the last time a thread named PAC-MAN was made so i thought of telling you. Cheers!
Click to expand...
Click to collapse
Thanks for telling me. I just made the changes in Title
Any chance to add a feature?
Just asking for "screen off: hold power for torch"
Thanks, I really enjoy the speed of this rom otherwise
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
I take no responsability if your phone crashes,burns,explodes,kills your daughter/son/pet/wife or starts a thermonuclear war, when using my ROM,I try to do my best to keep things safe,but one never knows
So,here it is
A really close to AOSP experience with Linaro,AOSP Openmaster,CodeAuroraForum[Qualcomm guys] optimizations
Built from Linaro KitKat sources,with their special ARM optimized toolchain,
With load of optimizations in a wide variety of projects(and more are to come)
Compiled with Google's Kernel for MSM(planning to switch to a custom kernel with more and more optimizations) to have a perfectly working build and very stable.
Includes ART fixes to allow the usage of previously incompatible apps at install time,however there are some apps which require calls to dalvik specific code(e.g. Titanium Backup which will continue to not work and there's not much I can do till developers update their code)
ROM comes without gapps(obviously),feel free to download the ones you like most.
Install instructions for EXT4:
Reboot to recovery
Make a backup
Flash my rom
Flash gapps if you want
Reboot and enjoy
If rom gets stuck at boot(or crashes without a reason),
Reboot to recovery(hint: hold power button for 10 seconds and phone will reboot)
Do a factory reset
Reboot and enjoy
Install instructions for F2FS:
Nothing to see here,yet.
Download:
Beta 1.0
Nightlies:
AndroidFileHost link
For more infos go to linaro site
I plan to build builds almost daily(Only if there are relevant changes and if I have time to build)
I accept any feature request,both for rom and kernel(and I'm open to switch to any kernel you might want,as long as a majority requests it)
Source code
Source code which isn't 100% linaro will be on LinaroDroid github account
Kernel source code is in here [URL="https://github.com/LinaroDroid/android_kernel_lge_hammerhead/tree/kk4.4"]LinaroDroid kernel/lge/hammerhead
[/URL]
Kang at will and feel free to comment submit pull requests
Scheduled features:
F2FS - Testing stage
Navbar customization - WIP
I am currently seeking for contributors to the project,anyone is free to commit features and port this to any other device
XDA:DevDB Information
LinaroDroid ROM, a ROM for the Google Nexus 5
Contributors
helicopter88, xboxfanj, Linaro guys
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked device,custom recovery
Based On: Linaro AOSP Source code,AOSP Master source code
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2013-11-21
Created 2013-11-21
Last Updated 2014-01-05
Reserved
You can talk directly with me through various ways:
Google+
XDA
Gmail
or on Freenode,channel #neopeek (when I'm not near my pc/phone,drop a line to awaycopter88,I'll read it once I will turn on my pc)
Reserved
Just to make building supereasy,I made something quick for you
assuming you are running linux,just run this
Code:
curl https://raw.github.com/helicopter88/linaro_scripts/kk4.4/builder.sh && chmod a+x builder.sh && source builder.sh
This will set up the environment and start a build(I did exclude vendor blobs as you might prefer to get 'em from your phone)
Downloading!
If you have any problem with boot,do a factory reset,and make sure it really reset your data
I am a big fan of linaro optimization. looking forward to this rom. so now pretty no additional features right?
jtwlbz said:
I am a big fan of linaro optimization. looking forward to this rom. so now pretty no additional features right?
Click to expand...
Click to collapse
It's basically AOSP + Optimizations
I can merge things(be it settings,features,other optimizations,removal of things) from other repos and kernels,if you want
helicopter88 said:
It's basically AOSP + Optimizations
I can merge things(be it settings,features,other optimizations,removal of things) from other repos and kernels,if you want
Click to expand...
Click to collapse
Is this KRT16S?
KRT16O
Settings force close.
davwman said:
Settings force close.
Click to expand...
Click to collapse
You should provide a log to help the dev out :good:
If I may ask, what is your philosophy with this ROM? Since you take all feature requests, do you intend on it branching far from the AOSP experience over time with heavy features? Or are you shooting for a simple and stable linaro optimized AOSP build? Only reason I ask is that I am extremely interested in the latter and would probably make this my daily driver :good: Either way, thanks for bringing this to us!!
::EDIT::
By the way, if you are looking for a custom kernel, might I recommend giving a shout to the maker of Bricked kernel. His kernel has linaro optimizations as well and is stable as hell.
You don't say...I'm at work. Flashed on a break, reverted to my backup so I'd have use of a phone.
Another tester (and me) had no issues with settings.. Tried WiFi,bluetooth and more..
Did you do a factory reset?
Inviato dal mio Nexus 5 utilizzando Tapatalk
Already fixed the issue. Cleaning up the files I normally pull out of zips I deleted NFC. Problem solved. Also running with the linaro Franco and moto dalvik patches!
Acvice said:
If I may ask, what is your philosophy with this ROM? Since you take all feature requests, do you intend on it branching far from the AOSP experience over time with heavy features? Or are you shooting for a simple and stable linaro optimized AOSP build? Only reason I ask is that I am extremely interested in the latter and would probably make this my daily driver :good: Either way, thanks for bringing this to us!!
::EDIT::
By the way, if you are looking for a custom kernel, might I recommend giving a shout to the maker of Bricked kernel. His kernel has linaro optimizations as well and is stable as hell.
Click to expand...
Click to collapse
Since Linaro usually sticks to AOSP and just optimizes,most of the users would find 0 reasons to switch over from stock to this,instead,by adding some features(not the heavily bloated ones) I want to give you more reasons to try this..
Due to the speed of this phone on stock,I really doubt I can increase in any way its speed to be really noticeable
I will check kernels tomorrow after doing something interesting to the build(hint: https://lwn.net/Articles/518718/ )
This is with Franco linaro and moto x dalvik patch
Includes ART fixes to allow the usage of previously incompatible apps.
Click to expand...
Click to collapse
How does this work? And can it run any app?
davwman said:
This is with Franco linaro and moto x dalvik patch
Click to expand...
Click to collapse
moto x dalvik patch? Edit: Found -
"It is the dalvik optimization from MotoX it is being tested as of now for Nexus 5."
Can be downloaded here: http://forum.xda-developers.com/showthread.php?p=47631545
Nickamina said:
moto x dalvik patch? Edit: Found -
"It is the dalvik optimization from MotoX it is being tested as of now for Nexus 5."
Can be downloaded here: http://forum.xda-developers.com/showthread.php?p=47631545
Click to expand...
Click to collapse
That's the one. This ROM is very quick and extremely light with no additional garbage added. Just the way I like it.
Hi Bacon Community!
Let's keep this short and simple...
I will be regularly building and uploading OmniRom 6.0 and Slim6 builds to this thread.
OmniRom is built with stock Omni trees.
Slim6 is built with Sultanxda's CAF based trees.
Optimized with JustArchi's ArchiDroid Optimizations V4.1 - Unleash the power!
READ BELOW
When reporting bugs, please state which ROM it is, the build date, and what GApps!
OmniRom 6.0.1
Downloads: drdevs
Rom Source: Github
Kernel Source: Github
Gerrit (code review): merged
Slim6
Downloads: TBA
Rom Source: Github
Kernel Source: Github
Gerrit (code review): merged
GApps
I recommend using OpenGApps or SlimGApps. Other GApps are untested by me so check the thread before complaining about bootloops!
I will probably be adding small features like Viper4Android, SnapdragonCamera, etc. in future builds, but don't ask when because you won't get an answer!
XDA:DevDB Information
YoshiShaPow's Development Hub, ROM for the OnePlus One
Contributors
YoshiShaPow, JustArchi, Sultanxda, Omni Team, Slim Team
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: Omni. Slim
Version Information
Status: Alpha
Created 2015-11-29
Last Updated 2015-12-08
How to install
- Download and move rom zip and GApps zip to internal storage
- Reboot into recovery
- If you're coming from another rom, wipe DATA
- Wipe SYSTEM, CACHE, and DALVIK CACHE
- Flash the rom, GApps, (and SuperSU if wanted)
- Reboot
OmniRom Bugs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The very first Omni build is up! This one uses completely stock sources with no modifications at all. Sadly, I will not be able to provide changelogs for every build at the moment because it will just take waaay too long. Once I get things going and the changelog script working, then I will start posting them. Happy flashing!
omni-6.0-20151129-find7op-HOMEMADE.zip
YoshiShaPow said:
The very first Omni build is up! This one uses completely stock sources with no modifications at all. Sadly, I will not be able to provide changelogs for every build at the moment because it will just take waaay too long. Once I get things going and the changelog script working, then I will start posting them. Happy flashing!
omni-6.0-20151129-find7op-HOMEMADE.zip
Click to expand...
Click to collapse
Good work and thanks
Can you please tell me does omni use the oppo camera libraries or stock ones thanks
nikhil18 said:
Can you please tell me does omni use the oppo camera libraries or stock ones thanks
Click to expand...
Click to collapse
I'm positive that it uses oppo camera libraries because of the shared proprietary vendor.
Eagerly awaiting the slim builds! Right now on Sultans ROM, but need slim features ?
Sent from my A0001 using Tapatalk
Tnx ????
Couldn't get it to boot. Performed a clean flash. Even redownloaded it
The ROM is very, very fast and the ColorOS camera k2 works great ?
Tnx @YoshiShaPow ??
Any chance getting the gesture typing work with omni builds? I never install GAPPS, but with slim 5 gesture typing worked fine. Sometimes the solution was to copy approriate ljn_latinimegoogle.so file into /system/lib folder, but it doesn't help with omni 6.
What to do? Typing without gesture typing is really slow. Installing privacy pervasive GAPPS is out of question, nor installing any apks.
Thank you already in advance!
AntiSyrum said:
Couldn't get it to boot. Performed a clean flash. Even redownloaded it
Click to expand...
Click to collapse
What GApps are you using?
I have read the full OP, and I know that you're currently building unmodified Omni source. Does this mean that at this stage, your build, and herna's are the same? Do you plan to add your own modifications, or just continue to build from source? Sorry for the newbie question. I hate to pollute development threads.
RoryPipi said:
I have read the full OP, and I know that you're currently building unmodified Omni source. Does this mean that at this stage, your build, and herna's are the same? Do you plan to add your own modifications, or just continue to build from source? Sorry for the newbie question. I hate to pollute development threads.
Click to expand...
Click to collapse
Correct me if I'm wrong, but I think Herna's source is slightly modified (I know he builds SnapdragonCamera rather than the stock camera app). Other than that, it's pretty much the same. I will be adding things later on.
YoshiShaPow said:
Correct me if I'm wrong, but I think Herna's source is slightly modified (I know he builds SnapdragonCamera rather than the stock camera app). Other than that, it's pretty much the same. I will be adding things later on.
Click to expand...
Click to collapse
so what dose'nt work?
lumufei said:
so what dose'nt work?
Click to expand...
Click to collapse
The only bug I've found so far is that NFC doesn't work, but it's not really a bug. Omni is implementing some magical NFC changes so it will be fixed soon.
Will the Slim6 builds be CAF based?
rituj26 said:
Will the Slim6 builds be CAF based?
Click to expand...
Click to collapse
You should at least try to read the first post, which I'm pretty sure you haven't.
YoshiShaPow said:
The only bug I've found so far is that NFC doesn't work, but it's not really a bug. Omni is implementing some magical NFC changes so it will be fixed soon.
Click to expand...
Click to collapse
OK thanks ,then what about battery life?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Future Is Here
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war.
Please do some research if you have any concerns about using custom ROMs/Kernels.
You are choosing to make these modifications, and if you point the finger at me for
messing up your device, I will laugh at you.
ABOUT
Euclidean OS is a AOSP based custom ROM for Google Nexus 5 with kernel improvements and useful features at the right place, providing a nice and smooth experience to the user. It’s based on Android 7.1 and the very famous ROM PureNexus.
MISSION
Euclidean OS stands for stability, speed and simplicity. We all have different opinions about how a perfect android operating system would be, due that, there're plenty of custom ROM's available. We don't want to be just another one, but the one, mainly for the AOSP lovers. Our goal is to provide extra features and improvements into the code without compromising the stability and the performance, always looking for the best way to improve and open for opinions in order to give to the user the best android experience. Don't get stuck in the past, the future is here!!
FEATURES
This is a list of the main features of this ROM and the built-in kernel.
Full Google Pixel experience
Busybox, init.d, addon.d support
UI Improvements
Full Substratum Theme Engine support (Rootless Mode)
ADB enhancements
Qualcomm Snapdragon Clang 3.8
Qualcomm biQuads Stereo Audio Codec
Night Display
Ambient Display
F2FS Support
OpenDelta Updates
MicroG full support
Signature spoofing support
AOSPA Battery Style
AOSPA build enhancements (sqlite, zlib, f2fs, jpeg, png, skia, ...)
Disable battery saving status & navbar colors
LockScreen PIN Quick-Unlock
Custom brightness slider
Custom keyboard IME features
Built-in screenrecorder
CopperheadOS Extra Security Patches
OmniROM MusicFX
SafetyNet Pass
Weather QuickSettings
Lawnchair Launcher
MultiROM full support KERNEL
Stereo call recording support KERNEL
Fast charge support KERNEL
Frandom support KERNEL
Battery Life eXtender KERNEL
Upstreamed 3.4.x kernel KERNEL
exFAT support KERNEL
Adaptive LMK Optimizations KERNEL
CPU Overclocking support KERNEL
Upstream DirtyCow exploit fixes KERNEL
ZRAM compressed memory with LZ4 support KERNEL
Ultra Kernel same-page merging (UKSM) support KERNEL
FSync support KERNEL
SCREENSHOTS & REVIEWS
The best way to see if a ROM fits for you is to test it and then decide. Although we know that users want to take a look on how the ROM looks before flashing it, so we created a screenshots gallery for you to have a quick look.
ScreenShots ↠ Imgur Gallery
We've also YouTubers who made some great reviews about this ROM. (May not be up-to-dated to the latest version, so expect older reviews)
DZ ANDROID ↠ Euclidean OS 7.1.1 13/03/2017
RUI PINHEIRO ↠ Euclidean OS 7.1.1 12/02/2017
DZ ANDROID ↠ Euclidean OS 7.1.1 20/01/2017
AGUNG BUDIDHARMA ↠ Euclidean OS 7.1.1 15/10/2016
ISSUESRead this twice before flashing/posting!
Cod. 001:
State: Solved!
Priority: High.
Overview: KRACK Wifi Vulnerability.
INSTRUCTIONS
Reboot into recovery mode
Format all partitions except Internal Storage
Flash EuclideanOS zip
Flash GApps
Flash SuperSU/Magisk [Optional]
Reboot System
DOWNLOADS
Official builds can be discussed in the forum and will get the support from the developer. They are set as NIGHTLY.
OFFICIAL BUILDS
Test builds CANNOT be discussed in the forum and WON'T be given any support from developer. They're for tests proposes only!! They are set as TEST.
TEST BUILDS
CONTRIBUTORS
We would like to thank to everyone how contributed to this project, helping to build the Euclidean OS Project, the most notable ones are listed below.
Guiseppe Careri
PureNexus Team
LineageOS Team
NitrogenOS Team
Partimus Prime
Substratum Team
Chdloc
Kamarush
Kreach3r
AOSPA Team
GalaticStryder
DONATORS
This is a personal project where we work during our free time because we love doing it. Although there’re some fixed expenses like server renting that we have to pay from our pocket. You’re free to use it without any charge, the only thing we want is to respect the devs & give a good feedback about the experience. If you like our work, feel free to donate us. Thanks so much to the ones who have donated so far and helped us supporting our server costs.
Jeric0
BillGates1
miessos
OmegaMode
attily89
LTEx
DeviceGuru
SOURCES
Source for ROM at Github.
Source for Device & Kernel at Github.
Source for ROM Base at Github.
DISCLAIMER
~ All project resources were built with free and open source software. ~~ Euclidean OS trademark and logos are copyleft. ~~ This is a development thread, be polite. ~
Reserved
Reserved
Any link for testing?
I too would gladly test this
jeuceda said:
Any link for testing?
Click to expand...
Click to collapse
ourangashane said:
I too would gladly test this
Click to expand...
Click to collapse
It's up
Rom is flashing ATM, will review it in a minute
aciupapa said:
Rom is flashing ATM, will review it in a minute
Click to expand...
Click to collapse
Rom link ?
M Asad Khilji said:
Rom link ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=17268#downloads
For me only bug so far is autorotation, wich doesn't work. I'm messing with multirom stuff now, idk if it will work (probably I'll f*ck something up :/ )
Looks great! However, could you upload a build without GAPPS?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
aciupapa said:
For me only bug so far is autorotation, wich doesn't work. I'm messing with multirom stuff now, idk if it will work (probably I'll f*ck something up :/ )
Click to expand...
Click to collapse
Oh didn't notice that, will looking into it. Thanks for reporting
pianistaPL said:
Looks great! However, could you upload a build without GAPPS?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
Gapps already included...
marcomarinho said:
Gapps already included...
Click to expand...
Click to collapse
He want build WITHOUT gapps to use for ex. MicroG
After about 2 hours it's running pretty smooth considering its the first alpha build. Auto rotation bug that's been mentioned already, touch sensitivity is just a bit sluggish, and permissions dialogs are the only bugs I've noticed. Kernel provides great battery so far, I look at my phone ALOT lol.
edi194 said:
He want build WITHOUT gapps to use for ex. MicroG
Click to expand...
Click to collapse
I didn't understood ... I included nano Gapps, so no FCs and permission problems
Multirom working or not ?
Anyone can confirm that ?
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
ourangashane said:
After about 2 hours it's running pretty smooth considering its the first alpha build. Auto rotation bug that's been mentioned already, touch sensitivity is just a bit sluggish, and permissions dialogs are the only bugs I've noticed. Kernel provides great battery so far, I look at my phone ALOT lol.
Click to expand...
Click to collapse
Please share battery life, performance and SOT.
After complete charge cycle...
Thanks !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war.
Please do some research if you have any concerns about using custom ROMs/Kernels.
You are choosing to make these modifications, and if you point the finger at me for
messing up your device, I will laugh at you.
Lambda Kernel was my development start point in the LG G2 glorious period, now you're looking at a new "horizon of possibility" for the LeEco device family. This Kernel has been written from scratch since January 2017, resulting in a small, polished and minimal core that's migratable across Kernel revisions.
It follows the flash n' go principle, everything packed in the Kernel is already tweaked and ready to be used as a daily driver for everyone.
The downloads, contributors and source code are at the bottom of this post, it is recommended to read everything before flashing.
DEVEL: My own testing builds for certain features and tests. They aren't normally shared, although sometimes I publish them. If you see one of them, don't forget they are recommended for advanced users/developers only because of their potential changes that must be debugged before publishing a WEEKLY version.
WEEKLY: They are closer to the proper release version but still can have some errors or bugs to be reported and tested, they should be generally stable.
SNAPSHOT: That's the version for the ones that don't want their devices to be lab rats for new features and staging changes. I don't know whether or not to say something is stable enough to be a SNAPSHOT but if you see one it's because it's been sometime running well.
Pretty straightforward once you get used to it, isn't it?
A general panorama for Lambda Kernel, always matching the latest release, in this case the WEEKLY from 09-15-2018.
HOT ↠ Source-code changes for Lambda Kernel.
COLD ↠ Environment changes for Lambda Kernel.
Latest Kernel Common 3.18 from Google's upstream HOT
Latest LA.UM.6.5.r1-09300-8x96.0 Kernel source base from CAF's upstream HOT
Latest LA.UM.6.5.r1-09300-8x96.0 Wi-Fi driver from CAF's upstream HOT
Compiled with Clang 7.0 and assembled with GCC 7.2 HOT
Read this twice before flashing/posting!
Cod. 000:
State: Placebo!
Priority: Urgent.
Overview: The thread is under construction here as well.
Read this twice before flashing/posting!
Q. How to install this Kernel?
A. Download the version you'd like to use and flash using a custom recovery like TWRP.
Q. What ROMs does this Kernel support?
A. It should support all versions of Android 8.1, being it CAF based.
Q. Does this Kernel support Treble ROMs or GSIs?
A. No, at the moment the /vendor mount point is not present and thus it's not supported.
Click the Downloads button above to go straight to Github releases page, download and flash it in recovery.
Many developers and people helped to bring the pieces of code needed to build the Lambda Kernel Project, some of them are listed below.
Dorimanx
AlexDNS
Myfluxi
Codeworkx
FranciscoFranco
SultanXDA
Source for Kernel at Github.
Source for AnyKernel2 at Github.
Guide and introduction to Lambda Kernel development at Github.
~ All project resources were built with free and open source software. ~~ Lambda Kernel trademark and logos are copyleft. ~~ This is a development thread, be polite. ~
XDA:DevDB Information
Lambda Kernel, Kernel for the LeEco Le Max 2
Contributors
GalaticStryder
Source Code: https://github.com/GalaticStryder/android_kernel_leeco_msm8996/commits/lambda-reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Weekly 09152018
Beta Release Date: 2018-09-15
Created 2018-03-23
Last Updated 2018-09-14
Reserved
Reserved.
Reserved
Reserved.
Hey! This kernel works only on EUI right?
prajjwal.laad said:
Hey! This kernel works only on EUI right?
Click to expand...
Click to collapse
Yes, this is for EUI at the moment.
XDA has had a little problem I guess or I have pressed the button to apply my XDA DevB project while it was spinning for more than a minute, wow! If any moderator can delete the other threads I appreciate, sorry for the inconvenience.
EDIT: 502 Bad Gateway but it posted, somehow.
Heyyo, congrats on the kernel project GalaticStryder!
GalaticStryder said:
Yes, this is for EUI at the moment.
XDA has had a little problem I guess or I have pressed the button to apply my XDA DevB project while it was spinning for more than a minute, wow! If any moderator can delete the other threads I appreciate, sorry for the inconvenience.
EDIT: 502 Bad Gateway but it posted, somehow.
Click to expand...
Click to collapse
Yeah it's weird... it's definitely an XDA Forum bug. Happens even on edits. I've made the same mistake by accident too a month or two ago so they haven't fixed it yet I guess...
ThE_MarD said:
Heyyo, congrats on the kernel project GalaticStryder!
Yeah it's weird... it's definitely an XDA Forum bug. Happens even on edits. I've made the same mistake by accident too a month or two ago so they haven't fixed it yet I guess...
Click to expand...
Click to collapse
Thanks, I'd like to update the thread on what the new version of today has but I'll wait a bit, it's just a classic (CAF) Kernel for EUI with patched battery phandle and faster charging compared to stock but still safe, same constants just a little faster due to updates and fixes I made in charger code.
Hope I can update this and the Pro3 thread as soon as possible with the new stuff.
@GalaticStryder highly appreciated that you chose to work on this device, really looking forward for this kernel to expand its compatibility to all roms, God speed!!
Working on eui 5.8 16s? Please tell me
alich3451 said:
Working on eui 5.8 16s? Please tell me
Click to expand...
Click to collapse
Backup your boot partition and flash it over, I've only tested it on 26S but on Pro3 my Kernel ran on all versions I tested. Make sure you're not encrypted otherwise it won't flash (Indian 16S for example), to get rid of encryption you'd flash the latest Chinese version or one that is based on it.
My leeco set has this strange color calibration issue-its very warm and yellowish- due to which I don't use stock roms. I also am able to use only those custom ROMs which have color calibration or kcal built in. Is it possible to implement kcal support in your kernel? Thanks a lot.
Wow! It's awesome... Great kernel...
Sent from my [device_name] using XDA-Developers Legacy app
RubeusHagrid said:
Wow! It's awesome... Great kernel...
Click to expand...
Click to collapse
Can you check if there is an option in kernel auditor titled as screen which has color calibration?
Mahz4130 said:
My leeco set has this strange color calibration issue-its very warm and yellowish- due to which I don't use stock roms. I also am able to use only those custom ROMs which have color calibration or kcal built in. Is it possible to implement kcal support in your kernel? Thanks a lot.
Click to expand...
Click to collapse
Same for me. But most people keep saying I am wrong. Not kcal, default color calibration in kernel should be changed, because it's invalid.
giaur said:
Same for me. But most people keep saying I am wrong. Not kcal, default color calibration in kernel should be changed, because it's invalid.
Click to expand...
Click to collapse
Could you dump what type of panel you have got and variant? Mine seems to be fine (truly) but I see the panel calibration has a few faults on the others from stock itself, and both open sourced codes for Max2 and Pro3 are the same regarding the panel, no updates.
Need to boot the stock Kernel again and dump all I can from Kernel logs or... reverse engineering.
If it is not excuse to ask, will be there any updates for Lambda Kernel for LG G2 ever?
GalaticStryder said:
Could you dump what type of panel you have got and variant? Mine seems to be fine (truly) but I see the panel calibration has a few faults on the others from stock itself, and both open sourced codes for Max2 and Pro3 are the same regarding the panel, no updates.
Need to boot the stock Kernel again and dump all I can from Kernel logs or... reverse engineering.
Click to expand...
Click to collapse
Truly I guess. Screenshot:
I'm on Lineage 15.1 currently. To get it white I need to set LiveDisplay 9700K. Default color calibration looks terribly wrong.
Btw is your kernel suitable for Lineage 15.1? Or it''s for EUI only.
BTW, works perfectly on Le Max 2 Small eUI V18.
My screen seems yellowish cuz I turned on Reader Mode.
If turned off, my screen is white enough
Hey thank you so much for your kernel. I can't use EUI ROMs because when quick charge is on it never charges more than 1000mH.. But on custom ROMs I can charge my phone even with 4000mH. It's a life saver sometimes.. Does your kernel provide this feature for the EUI @GalaticStryder?
What is the battery life with this kernel?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, this is my personal kernel for the OnePlus 5. While I am not a super star kernel developer, I do know my way around it. Hopefully you enjoy :highfive:
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Based on GzR kernel
Up to date with the latest stable Linux version (4.4.159)
Up to date with the latest CAF branch (kernel.lnx.4.4.r27-rel)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Several subsystems converted to use power efficient workqueues
Backlight dimmer
KCAL color control
CPU Input Boost driver
Devfreq Boost driver
Sound control
Wakelock control
Westwood as the default TCP algorithm
Built with the latest Google Clang 7.0.2 toolchain
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Primary: https://androidfilehost.com/?w=files&flid=283181
Through TWRP:
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Reaper version to the other:
Just flash the kernel zip and reboot
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: My daily driver is GZOSP so I test all the builds on this ROM but this kernel should work on other pie ROMs. If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking GZOSP compatibility, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience. To control the user visible features of the kernel listed above, I recommend using @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
The various other developers for their patches
@martinusbe, @nathanchane for their work on GzR kernel
@nathanchance for android-linux-stable organization, thread inspiration, patches, tips and for inspiring me to start kernel development
@KuranKaname for helping me with kernel and being a bro
@nychitman1 for him work on DU kernel (lots of patches are inspired from him work)
@mady51 for introducing me in kernel development
@osm0sis for AnyKernel2
@akhilnarang for him modified AnyKernel2 for OP5, help and patches for my kernel
All of you guys for viewing the thread
reaper (custom ROMs - 9.0): https://github.com/FRNKSTN/Reaper/tree/reaper
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
Reaper, Kernel for the OnePlus 5T
Contributors
FRNKSTN, martinusbe, KuranKaname
Source Code: https://github.com/LiquidRemix-Devices/android_kernel_oneplus_msm8998
Kernel Special Features: HMP
Version Information
Status: Stable
Current Stable Version: 20180930
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-15
Reserved
Reserved
Great job
fowzanaamir said:
Great job
Click to expand...
Click to collapse
Thanks
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
For castom or OOS ?
Ideas4ya said:
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
Click to expand...
Click to collapse
Thanks! I'm glad you like
[email protected] said:
For castom or OOS ?
Click to expand...
Click to collapse
For custom ROMs only
Can we OC ? thx
mannyalba said:
Can we OC ? thx
Click to expand...
Click to collapse
Give me commits for that and I'll take a look
Using on CRdroid 9.0 and is all working a treat great work
Sent from my ONEPLUS A5010 using Tapatalk
danny19901 said:
Using on CRdroid 9.0 and is all working a treat great work
Click to expand...
Click to collapse
Thanks
Delivered on the crDroid 8.1. While everything is fine
[email protected] said:
Delivered on the crDroid 8.1. While everything is fine
Click to expand...
Click to collapse
Very cool :highfive: Let me to know if all is working perfect.
manojpawarsj12 said:
Good work ?
Click to expand...
Click to collapse
Thanks
FRNKSTN said:
Very cool :highfive: Let me to know if all is working perfect.
Click to expand...
Click to collapse
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
mukesh22584 said:
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
Click to expand...
Click to collapse
Thanks, bro! This is cool
FRNKSTN said:
Give me commits for that and I'll take a look
Click to expand...
Click to collapse
No idea how to do that, i mean overclock/underclock ?
mannyalba said:
No idea how to do that, i mean overclock/underclock ?
Click to expand...
Click to collapse
Check FAQ