MY 5x is now in bootloop . i dint find a way to boot it to bootloader as adb is inaccessable from erecovery and non booted phone (i tried restoring update.app on my l22 with emui4.0 and this happend)
Any help is appreciated .
it's possibleSB
- turn device off
- put USB-cable in your pc (with drivers and adb/fastboot installed)
- press vol-down and power simultan und plug in USB-cable in your phone within one second
- voilla!:laugh:
gopinaidu77 said:
MY 5x is now in bootloop . i dint find a way to boot it to bootloader as adb is inaccessable from erecovery and non booted phone (i tried restoring update.app on my l22 with emui4.0 and this happend)
Any help is appreciated .
Click to expand...
Click to collapse
did above method help and you able to revive the phone bro?
Related
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
HI i have just bought Honor 7 european version PLK-L01 , i have rooted this phone with twrp recovery. and in twrp recovery which is in chines languge i have deleted OS and also some of TWRP files. no back has been made.
now i have just four options in my phone
without conected to pc.
1. direct in twrp recovery mode (vol up+ power button) and if i install my os through zip file. it shows MD5 not found.
2. i can see both internal and SD card storage. internal storage is 10.3gb. and have TWRP folder with TWRP.img. nothing more.
with usb cabel conected to pc.
1. both vol button + power button wil bring Huawei e-Recovery mode. there i can conect to my w-lan but msg will come getting package info faild
2. vol button down + power button will bring fastboot&rescue mode ( that i can conect with pc and should open Hisuite)
but nothing will happen.
or with out any Button apear just Honor logo.
can you please help me out to get back my os on my phone.
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
sminki said:
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Click to expand...
Click to collapse
thanx for the link but in CMD commands are not working and also fastboot devices not found.
how to recognize my device i have install ADB driver and also Hisuite. i will upload pictures
passja said:
thanx for the link but in CMD commands are not working and also fastboot devices not found.
how to recognize my device i have install ADB driver and also Hisuite. i will upload pictures
Click to expand...
Click to collapse
Update....
Thank you very much for your help. actually i have changed the computer and tried again its worked perfect i have my Honor back.... thanx alot for such great help
passja said:
Update....
Thank you very much for your help. actually i have changed the computer and tried again its worked perfect i have my Honor back.... thanx alot for such great help
Click to expand...
Click to collapse
i have the same problem cant work out a fix please can you help me
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Have you tried getting into the bootloader?
Do you have twrp?
lionboy33 said:
Have you tried getting into the bootloader?
Do you have twrp?
Click to expand...
Click to collapse
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
tHe_ImPrA said:
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
Click to expand...
Click to collapse
Neither do I .. Try to do power + vol down or vol up
lionboy33 said:
Neither do I .. Try to do power + vol down or vol up
Click to expand...
Click to collapse
If I do get into the bootloader what should I do next ?
tHe_ImPrA said:
If I do get into the bootloader what should I do next ?
Click to expand...
Click to collapse
Use hisuite to reinstall the firmware
Or you can get into fastboot and flash it.
Sent from my PLK-L01 using Tapatalk
tried many combinations to get into the bootloader with no luck
only black screen with vibrations
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
lakistrike95 said:
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
Click to expand...
Click to collapse
But this will void the warranty, and its not his own device so that should be the last option
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Get a sd card, create a folder called "dload" without quotes.
Copy the file update.app from the latest B380 into the folder.
Have your phone turned off and press vol+- and power until the screen turns on. It should update.
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
If you can not enter fastboot mode (power + vol down or vol down and connect to pc) take it to Huawei customer service center.
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
Hi All
I just hard bricked my p20 lite there is no recovery no fastboot and erecovery phone is in bootloop and trying to make factory reset but stucking on EMUI for hours I was trying everthing (YES I DID TRY TO CONNECT CABLE FOR FASTBOOT) is there any of you can share of scatter file for ane-lx1 this is my last hope the program name MTK DROID ROOT&TOOLS and its easy to make THANK YOU FOR HELP !!!
Update
I managed to connect in fastboot just in case any of you have the same problem - wait to battery die !!!!!!!
thank you man
Captinplanet said:
Hi All
I just hard bricked my p20 lite there is no recovery no fastboot and erecovery phone is in bootloop and trying to make factory reset but stucking on EMUI for hours I was trying everthing (YES I DID TRY TO CONNECT CABLE FOR FASTBOOT) is there any of you can share of scatter file for ane-lx1 this is my last hope the program name MTK DROID ROOT&TOOLS and its easy to make THANK YOU FOR HELP !!!
Update
I managed to connect in fastboot just in case any of you have the same problem - wait to battery die !!!!!!!
Click to expand...
Click to collapse
I have same problem thank you
Captinplanet said:
Hi All
I just hard bricked my p20 lite there is no recovery no fastboot and erecovery phone is in bootloop and trying to make factory reset but stucking on EMUI for hours I was trying everthing (YES I DID TRY TO CONNECT CABLE FOR FASTBOOT) is there any of you can share of scatter file for ane-lx1 this is my last hope the program name MTK DROID ROOT&TOOLS and its easy to make THANK YOU FOR HELP !!!
Update
I managed to connect in fastboot just in case any of you have the same problem - wait to battery die !!!!!!!
Click to expand...
Click to collapse
try to restore your device using dload method. It needs you to copy the UPDATE.APP in dload folder of an external sd card(formated in NTFS format) and then just press both vol up+down along with power button for a few seconds. It will auto launch huawei e-recovery and will try to flash the UPDATE.APP you stored in ext sd card. This should definitely work. Evevn if this method fails, then there is no other method for you other than asking for replacement.
Dload method doesn't need you to unlock your device or bootloader.
did you fix your problem bro? I have the same problem as you do