Related
MY 5x is now in bootloop . i dint find a way to boot it to bootloader as adb is inaccessable from erecovery and non booted phone (i tried restoring update.app on my l22 with emui4.0 and this happend)
Any help is appreciated .
it's possibleSB
- turn device off
- put USB-cable in your pc (with drivers and adb/fastboot installed)
- press vol-down and power simultan und plug in USB-cable in your phone within one second
- voilla!:laugh:
gopinaidu77 said:
MY 5x is now in bootloop . i dint find a way to boot it to bootloader as adb is inaccessable from erecovery and non booted phone (i tried restoring update.app on my l22 with emui4.0 and this happend)
Any help is appreciated .
Click to expand...
Click to collapse
did above method help and you able to revive the phone bro?
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Hi everyone,
first of all, I guess there should be a section dedicated to the Z5 to keep the forum clean!
Other than that, I'm really having trouble with my Z5. I can't find a way to move on from fastboot mode! Can't boot to edl, tried to flash recovery but they won't boot and so on...
Do someone has some idea? I can provide every information you need to troubleshoot that!
Thank you in advance,
Lorenzo Benevento.
Hi , inside stock firmware which .img files you have ?
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
edsmanco said:
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
Click to expand...
Click to collapse
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Teddy Lo said:
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Click to expand...
Click to collapse
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
help
how do u fix it? i have the same problem here, please help
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
Yes, how do u fix it? Share withy us.
xplozia said:
Yes, how do u fix it? Share withy us.
Click to expand...
Click to collapse
Join the telegram group: Lenovo Z5 Brasil, the guys there can help.
I used qfil to restore it.
I also used the video by rendroid. Send him a PM and he'll reply.
Hi there!
I've been trying out a few things and was wondering how on Earth you got it into fastboot mode in the first place? I can't find a way.
xplozia said:
Hello,
I bricked my Lenovo Z5. I need your help, please!
I installed from fastboot, Pixel Dust ROM and after that, the phone not starting. When I connect the phone to PC, I have message with Unlocking Bootloader (was unlocked initialy, on old rom) then Lenovo logo and after a black screen.
I downloaded ZUI_3.9.075_ST for Lenovo, I installed Qualcomm drivers, I installed Qfill but when connect the phone I don't have 9008 Port, to me is 900E. I read few forums about this error (https://zukfans.eu/community/threads...e-easily.3504/ and https://club.lenovo.com.cn/thread-3021991-1-1.html), I makeed a USB cable for DEEP Flash,I peeled the usb-c cable and touched Green and Black wires, but without success.
I installed a new Lenovo USB driver and with USB cable for DEEP Flash, I put the phone in the 9008 port, and Installed with successful, many ROMs 3.9.075, 3.9.200, 4.0.390 but every time after the first reboot appear message with opened bootloader then Lenovo logo and restarting to infinite.
When the phone is connected to PC I have on the phone a menu with "First Boot Mode" and the phone is accesible from PC:
"C:\Users\user>fastboot devices
bb806aa3 fastboot"
I will apreciate yours help. Thank you!
Click to expand...
Click to collapse
Did you follow this guide? https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-how-to-flash-android-8-1-9-0-t3840839
Yes I see your post and I solved my phone
greetings,
im rookie here but once my MEDIATEK phone got stuck in fastboot mode and i fixed it with connecting to pc and type " fastboot reboot " in adb
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
share the fix
Please refer to the replies above
Lenovo z5s stuck in fastboot
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Thelostman said:
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Click to expand...
Click to collapse
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
xplozia said:
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
Click to expand...
Click to collapse
Don't worry i've already solved with some CHINESE PIROMANCY!!!!!!! Even with effective IMEI restoration (I couldn't restore the 2nd IMEI because I didn't know how to set up this one manually with the method I've used with my lenovo)
Hello,
I have a Lenovo Z5s. I wanted to install new android rom like Pixel Experience
I managed to unlock the bootloader with adb fastboot.
I succeeded in flashing TWRP recovery 3.3.1-0529 for my device.
I've downloaded Pixe Experience GSI rom available here https://forum.xda-developers.com/z5...evelopment/lenovo-z5s-pro-twrp-3-3-1-t3953346
I have copied and pasted the Pixel Experience rom (.img file) on my SD Card.
With TWRP, I have wiped necessary files for a clean install.
I have launched the installation of the rom, installation was complete, the phone has reboot, I show Pixel Experience boot sequence with Google logo. The process asked me a password (Encrypted?) . I decided to reboot the phone.
Now, the phone is blocked with a bootloop in recovery mode. I can't access anymore to TWRP recovery. (Erased?)
To explain clearly the situation: I have the menu showing these options: Restart bootloader > Recovery mode > Power Off > Boot to FFBM > Boot to QMM I> Start
FastBoot Mode
PRODUCT_NAME - sdm710
VARIANT - SDM EMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - ********
SECURE BOOT - yes
DEVICES STATE - unlocked
No Bootloader, no Baseband.
All of the options return the phone back to the same menu.
The situation seems to be critical (phone bricked) and I can't do anything and I don't know what to do. Is there a chance to save my phone?
Your help will be precious to make my phone work.
Thanks in davance . Best regards.
Hey guys i am also in bootloop with unlocked bootloader ,can you please help us to save our phone !!!???
Yesterday I did UNLOCK BOOTLOADER and then ROOT everything was fine I wanted to install V4A but after installation the device was in BOOTLOOP so I did it FULL WIPE and everything worked so I said I will return it to LOCK BOOTLOADER and since the device works it is stuck on the current image have been destroyed and can not boot realme can not enter bootloader and recovery
Today a good guy came into my computer and did MSMTOOL with me twice but without success I do not know what to do The device was bought exactly a week ago Thanks for the help
PS MSMTOOL requires username and password so that's why the guy helped me if something has a username and password I would love to try again
MY DEVICE - rmx2086
Amitayy said:
up plis help my phone briked!!
Click to expand...
Click to collapse
EDL mode is available but I have no clue if Flashone - "Qualcomm - flash dead phone" will work. Besides Flashone looks for zip file not ozip. You may need to convert ozip to zip and please check here for that - https://forum.xda-developers.com/realme-2-pro/how-to/convert-ozip-to-zip-installing-stock-t4065277.
I have X3, not Super Zoom but I could get the phone to edl mode and could see the COM port on Windows too. Power off the unit. Connect your USB cable to PC - this is important. wait for the screen to go blank. Press Vol Down + Power button together to get to recovery mode - takes few seconds. Select language and then press ver 1.2 (as shown on X3) about 3 times to get to edl mode. If you do not connect the cable as mentioned tapping ver x.x does not do anything.
Hope that helps and good luck.
PS: I know that you've mentioned that no recovery. Hopefully assume the screen remains blank and tap on bottom middle to see if Windows recognises any COM port under device manager.
up plis help my phone briked!!
bro did you get the solution . because i need it. my phone is bricked . it shows current image has been destroyed.....that stuff. its bootloader is not unlocked . i dont know what to do . some please help
hi , i have a realme x3 , after downgrading my phone is bricked , its says current image has been destroyed ........... , please help me someone in this lockdown without phone i will be in great trouble please help me . i am not able to boot to fastboot menu . its detected by the computer when both volume and power button is pressed
Bro msm tool works or not
Help me bro