I guess you know how to enable Diag and use QPST,
Just share a file for who need band1 with H1511, never test since no phone on hand, need your trial.
How to ? :
STEP1 flash the B12 enabled Radio trying to enable Diag port, detail:
http://forum.xda-developers.com/nexus-6p/general/fastboot-activate-band-12-volte-t3239652
STEP2 restore one of this qcn inside View attachment H1512_H1511_B1_B38_B39_B40.zip,
and restart your phone to see do you get B1 connect or not, LTE Discovery can help you to see the band info.
you can choose the qcn from the shortest one to long name one, just try and let us know which is good for you.
detail
http://forum.xda-developers.com/nexus-6/general/how-to-enable-nexus6-xt1103-4g-lte-t3042373
It's not working.as I try the first time you done filter the QCN.but someone whom interest in this can try it. If anyone whom want to try it you will also need a SPC,or you need to zero out modemst1 and modem st2partition.do a backup before you try any thing
Sent from iPhone ,using Tapatalk.
Thank you for so fast feedback, do you mind to send me your qcn before and after restore to let me see what is lack?
Awesome job again,i think it will be more attractive for the China Telecom user as the Band 1 was just allowed to deploy over the whole country,But i am wondering how about the qualcomm FED think about this,haha,BTW,Azlun,I had qcn for Nexus 5X H791 and it's easy to get the common model H790's qcn for the US version,so,try it on the Band 39 and Band 38?:fingers-crossed:
Not working for the HUAWEI SCL-CL00 with the generic modem fimware with AL00, writen B38 qcn can read the BCCH information,like SIB1 SB but not able to TX something to the BS statoin reaching the Papging mode.
Edit: sorry wrong thread, meant for nexus 6 section
Azlun said:
I guess you know how to enable Diag and use QPST,
Just share a file for who need band1 with H1511, never test since no phone on hand, need your trial.
How to ? :
STEP1 flash the B12 enabled Radio trying to enable Diag port, detail:
http://forum.xda-developers.com/nexus-6p/general/fastboot-activate-band-12-volte-t3239652
STEP2 restore one of this qcn inside View attachment 3799755,
and restart your phone to see do you get B1 connect or not, LTE Discovery can help you to see the band info.
you can choose the qcn from the shortest one to long name one, just try and let us know which is good for you.
detail
http://forum.xda-developers.com/nexus-6/general/how-to-enable-nexus6-xt1103-4g-lte-t3042373
Click to expand...
Click to collapse
Any update for band 1??
icecard7 said:
Any update for band 1??
Click to expand...
Click to collapse
hope more people to try it and find the truth
Where to find the H1511 SPC code so that i could restore qcn? @Azlun
Jongla said:
Where to find the H1511 SPC code so that i could restore qcn? @Azlun
Click to expand...
Click to collapse
you can try to ask your carrier like sprint,verizon if you gotten such phone from them with luck.
Sent from my Nexus 6 using XDA-Developers mobile app
Any new information on this? Sorry to resurrect an old thread. I was wondering if anyone has been able to extract their FULL qcn and just blank out relevant NV items such as IMEI, Bluetooth, Wifi MAC etc? I'd love to be able to compare this file to my OPTwo to see how different the writes are for the NV and potentially unlock other bands since the LTE amplifier and Snapdragon processor are the same in our devices
Related
Hi,
I have verizon galaxy tab 10.1, my question is how to setup my tab into diag mode?
I need flash my tab to others carrier/network like cricket etc
Thanks
Sent from my Xoom using xda premium
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
Click to expand...
Click to collapse
oh ok im sorry...
btw still waiting for help... howto enable diag mode for galaxy tab 10.1 verizon sch-i905..
anyone?
Us vzw tab owners have no dev support):
Sent from my SCH-I905 using xda premium
Sorry nobody is helping you. I really can't help either. I think I saw a post about an app in app store that lets you change carriers, but I have no idea where I saw the post and can't remember the apps name.
Sent from my GT-P7510 using one finger.
Benzoman said:
Sorry nobody is helping you. I really can't help either. I think I saw a post about an app in app store that lets you change carriers, but I have no idea where I saw the post and can't remember the apps name.
Sent from my GT-P7510 using one finger.
Click to expand...
Click to collapse
Its all good and yeah i heard aboit that as well i believe its t mobile only
Sent from my SCH-I905 using xda premium
Search for SGS secret codes in the Market, it let me go to DIAG menu. The tab is not recognized by any program though... Does anybody have any exp on that? Would be very appreciated.
PS Does anyone know if it's possible to have 3G internet on this tablet through RUIM CDMA sim or GSM sim? Thanks.
*update+question*
Earlier I had experience of flashing I800 Verizon's Galaxy Tab to other carrier, but this time situation seems to be worse. This LTE tab when connected to PC doesn't find all the drivers needed. This happens after it's setup for carrier flashing in DIAG mode - both UART and MODEM are set to modem. There is always one out of three drivers that's not found in device manager. Nothing can be done by any program - all of them connect successfully to the port, but are unable to make further progress (no communication with device).
Gurus and everyone, please! Does anybody have any suggestions of what could be possibly done? SIM-card slot as I understand is designed for LTE sim-cards and at the same time is locked to Verizon, that's pity.
roadhero said:
Earlier I had experience of flashing I800 Verizon's Galaxy Tab to other carrier, but this time situation seems to be worse. This LTE tab when connected to PC doesn't find all the drivers needed. This happens after it's setup for carrier flashing in DIAG mode - both UART and MODEM are set to modem. There is always one out of three drivers that's not found in device manager. Nothing can be done by any program - all of them connect successfully to the port, but are unable to make further progress (no communication with device).
Gurus and everyone, please! Does anybody have any suggestions of what could be possibly done? SIM-card slot as I understand is designed for LTE sim-cards and at the same time is locked to Verizon, that's pity.
Click to expand...
Click to collapse
diag mode port is show in pc, no need hidden menu, but now is need spc. verizon i905 spc not 000000.
now question is i need 16 digit password for this device?did anyone know 16 digit password for sch-i905?
this code is needed for unlock this device for flash to others carrier.
thank you for your kind help
hopatz said:
diag mode port is show in pc, no need hidden menu, but now is need spc. verizon i905 spc not 000000.
now question is i need 16 digit password for this device?did anyone know 16 digit password for sch-i905?
this code is needed for unlock this device for flash to others carrier.
thank you for your kind help
Click to expand...
Click to collapse
Can you please dedicate some time and describe exactly step by step what you did, what operating system did you use, the drivers that you installed, and how you were able to work with tablet? Thanx.
Edit: Well I kinda misread it, Damn the late night reading.
I do know of Market Unlocker to enable fake carrier's but for market only. Not entirely sure about the whole ACTUAL carrier change, You may need to however do some hex editing to the carrier locked devices, Back in the 9003 forums there were users who complained on Starhub blocking their device from using other carrier sim's and they found a way to hex edit the nv_data.bin
http://forum.xda-developers.com/showthread.php?t=1210289
Click to expand...
Click to collapse
Apparently that thread quotes that changing a value from 01 to 00 should unlock it.
roadhero said:
Can you please dedicate some time and describe exactly step by step what you did, what operating system did you use, the drivers that you installed, and how you were able to work with tablet? Thanx.
Click to expand...
Click to collapse
Just turn tablet then plug into pc, port wil shop up in device manager windows xp, driver you can use samsung diag driver for fascinate or epic 4g etc
Hi, I have problem with my phone (Cubot X6). Phoning ability is broken. My phone is now little tablet only
I haven´t much experiences with android flashing.
I think, NVRAM is corrupted and a I have no backup. I tried to change my IMEI number, but it helped once only, but it broke up in a few hours.
I am searching for someone with same model - I need the NVRAM backup / radio firmware. Of course, I will change your IMEI numbers for my own.
I will be glad, if you write me some tutorial.
If it helped me, i will give you some thankful reward (about 10 USD, PayPal).
I have the same problem....... please can you send me the nvram.bin?
paapaastrumf said:
I have the same problem....... please can you send me the nvram.bin?
Click to expand...
Click to collapse
My nvram.bin is also damaged, but i can send it to you.
We need nvram.bin from a functional phone.
Have you guys solved?
unfortunately not by my side
I am having a problem with my X6 where it boots in MIUI but everything starts to crash. I tried to flash stock rom via flashtool and it seems to work but reboots back again in MIUI, its like nothing can be written in phones memory...
Is this the same problem?
How do i know if i have a NVRAM backup, maybe i did one, where would it be_
thanks
Cubot X6 imei & nvram fix
Hello,
Maybe this will help:
https://www.youtube.com/watch?v=l5WNO7i110M
https://www.youtube.com/watch?v=B40C2hoxn8U
https://www.youtube.com/watch?v=Yfn72r9ybyo
https://www.youtube.com/watch?v=BW5lSVeMC4g#t=46
http://community.ebay.com/t5/Archiv...-the-IMEI-issue-on-CUBOT-MTK6589/td-p/3068151
http://forum.xda-developers.com/showthread.php?t=2461059
http://resolvedquestion.com/questions/184-how-to-fix-invalid-imei-after-factory-reset
http://www.chinasmartphonereview.com/guide-how-to-write-imei-for-mt6575-to-mt6589-devices/
http://www.needrom.com/download/tutorial-write-imei-number-for-mtk-65xx/
http://www.chinaphonearena.com/forum/Thread-Need-restore-IMEI-but-MTK-Droid-Tools-dont-works
http://www.gizbeat.com/4315/how-to-fix-repair-invalid-imei-tutorial-on-mediatek-mtk-phones/
**Please let us know if & which fix worked for you!**
Hello
i will help u guys
i will get my cubot x6 in a few days i will upload the file a sand a link here
sqedo said:
Hi, I have problem with my phone (Cubot X6). Phoning ability is broken. My phone is now little tablet only
I haven´t much experiences with android flashing.
I think, NVRAM is corrupted and a I have no backup. I tried to change my IMEI number, but it helped once only, but it broke up in a few hours.
I am searching for someone with same model - I need the NVRAM backup / radio firmware. Of course, I will change your IMEI numbers for my own.
I will be glad, if you write me some tutorial.
If it helped me, i will give you some thankful reward (about 10 USD, PayPal).[/Q
just put a copper wire or aluminium wire into the gsm antenna and the mobile network will be back ... it worked for me and if its antenna's problem will probably work for you so try it
Click to expand...
Click to collapse
ledio999 said:
just put a copper wire or aluminium wire into the gsm antenna and the mobile network will be back ... it worked for me and if its antenna's problem will probably work for you so try it
Click to expand...
Click to collapse
Is there a guide for this anywhere?
insx said:
Is there a guide for this anywhere?
Click to expand...
Click to collapse
hi i, it has to be something like this .. .youtube .com/ watch?v=MaDs5-qPZNs[/url]
regards
Thanks.
Hi! I bought an unlocked HTC One M8 in Italy (CID HTC__405). LTE is not working. I'm in Argentina and carriers use bands 4 and 28. The thing is that I read a little guide that came inside the box, and realised that the phone only have bands 3, 7, 8 and 20. So, I found this thread: http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 and this one too: http://forum.xda-developers.com/verizon-htc-one-m8/general/lte-band-7-2600mhz-finally-guide-t2992523
I could get my phone recognised by QLST and QXDM, but when I write the new values to 6828 and 6829 and reboot my phone, the values remain like the old ones. I'm right now at SUPERCID and S-OFF. I don't know what to do, please help me!
I want to share also that the original value is 524484, this is 10000000000011000100, that according to the guide means that enabled bands are 2, 6, 7 and 19, and not 3, 7, 8 and 20. So this suggests that band 1 should be position 0 instead of position 1, like the thread says.
I hope you guys can help me,
Thanks!
Lucas
REP
Is your device on lollipop?
ernigeek said:
Is your device on lollipop?
Click to expand...
Click to collapse
Hi,
I have the same problem.
After the reboot restores the "factory" settings section.
Identical in Section 1877 - written 0 by QXDM later 2307813334319039360 by RF NV Manager and after a reboot returns the value 82314112.
Sections 6828 is the value of 65544, which returns after a reboot
In 6829 sections can edit the value. After the restart does not change, but it does not change anything. I do not have LTE band 3.
SGH-I497 , rooted, JB 4.1.2 AT&T
Any ideas?
Zulugula said:
SGH-I497 , rooted, JB 4.1.2 AT&T
Any ideas?
Click to expand...
Click to collapse
This forum is specific to the HTC M8. You should ask in your specific device forums. Hacks for other devices can be harmful to your phone, or might not work anyway.
redpoint73 said:
This forum is specific to the HTC M8. You should ask in your specific device forums. Hacks for other devices can be harmful to your phone, or might not work anyway.
Click to expand...
Click to collapse
Thank You
I'm desperate.
This is a general solution for Qualcomm ..
Perhaps someone will tell something and useful for me.
This is the AT @ T ...
http://forum.xda-developers.com/showpost.php?p=56579550&postcount=570
(4)
Hello all
Can you please help me to install google services and play store to my PPTV King 7s? (Mediatek 6795, 640dpi, android 5.1)
I have rooted it but I didn't succed to install google services... I have tried everything! It seems non compatible and the company doesn't care at all...
Thanks in advanced
up
any help?
the firmware can be found here: http://www.needrom.com/download/pptv-king-7/
up
After rooting and installing the original OS, did you manage to be able to select the original theme? or was it set as default straight away? Also, was lenovo launcher still installed or not? as i suspect this was bloatware for the custom Rom that was installed for google sevices to work with the phone?
Hey there! I ordered a pptv king 7s on gearbest and now trying to figure out, what to do with it, when it arrives. There are some threads for the king 7 (without the "s") and i wonder, if i can use these instructions for the 7s, too...
tbh, the 7s is exactly the same as the 7 but the only difference is the firmware and lcd screen to make the 3d function work. I am currently trying to find a working link to the original 7s firmware. As i don't speak, read, or write Chinese langrage it is extremely difficult to find this 7s firmware. I have tried google translate but it is very limited. So if anyone can help with this, i would be very, very grateful.
Sent from my KING7 using Tapatalk
I have found the original firmware + tool to install the firmware with look at my thread here -> http://forum.xda-developers.com/android/help/help-twrp-pptv-king-7s-t3516609
the bad thing is it will take some day to download the file.... 20kb/s downlaod speed... but i will re-upload the files to mega i think later !
---------- Post added at 08:38 PM ---------- Previous post was at 08:37 PM ----------
GeorgesX said:
Hello all
Can you please help me to install google services and play store to my PPTV King 7s? (Mediatek 6795, 640dpi, android 5.1)
I have rooted it but I didn't succed to install google services... I have tried everything! It seems non compatible and the company doesn't care at all...
Thanks in advanced
Click to expand...
Click to collapse
moviecut said:
Hey there! I ordered a pptv king 7s on gearbest and now trying to figure out, what to do with it, when it arrives. There are some threads for the king 7 (without the "s") and i wonder, if i can use these instructions for the 7s, too...
Click to expand...
Click to collapse
fleebleflam said:
tbh, the 7s is exactly the same as the 7 but the only difference is the firmware and lcd screen to make the 3d function work. I am currently trying to find a working link to the original 7s firmware. As i don't speak, read, or write Chinese langrage it is extremely difficult to find this 7s firmware. I have tried google translate but it is very limited. So if anyone can help with this, i would be very, very grateful.
Sent from my KING7 using Tapatalk
Click to expand...
Click to collapse
read my comment above xd
Hi, I just got my King 7s yesterday for US$110, and success install Play Store.
(The glass-free 3D is really fun!)
Here we go:
1.Update to least firmware with build-in OTA.
(Today's version number is PP6000_206I PPOS-2016.10.13-152)
2.Enable USB Debugger (If you don't know how to, google it)
3.Root phone with https://www.kingoapp.com (use Windows version)
4.Download "Go Google Installer" (Go谷歌安裝器) and run it, then reboot
That's all! Do forget install Google Contact Sync for sync your contacts.
Good luck!
thats in my opinion the best way to get gapps(playstore, maps, okay google, etc...)
root the phone
install twrp
backup with twrp
select and download the gapps variant u want
to prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
since im not allowed to post real links, here is my "link"
opengapps . org /?download/
install it trough recovery (twrp)
this will also work with every other phone without gapps
changed the date display of my banners instead of Chinese banners.
changed the date display of my banners instead of Chinese banners. h t t p : / / 4 p d a . r u / f o r u m / i n d e x . p h p ? s h o w t o p i c = 7 9 2 6 5 4 & v i e w = fi n d p o s t & p = 6 5 2 0 2 4 1 0
Lost my IMEI's, can anyone help please.
Chamelephon - Recover your IMEI
fleebleflam said:
Lost my IMEI's, can anyone help please.
Click to expand...
Click to collapse
Recover your IMEI with this app:
Chamelephon
https://play.google.com/store/apps/details?id=com.cryptotel.chamelephon
Will this app recover both my original IMEI's or is it just a generator??
I have replaced one of my original IMEI's that i had lost with a spare i had on another device, with different windows software (not an app) but i would like to get my lost original IMEI back. (The one on the back of the box, i still have)
I also backed the custom Rom at the time through TWRP, and have the nvram saved in this backup, but cannot find a way to restore my backup, (not sure why) or read the nvram to get the lost IMEI info.
If i can find a way to read the nvram info, i can the get my lost IMEI back and all will be good again.
Any help with this would be very welcome.
T.I.A...?
fleebleflam said:
Will this app recover both my original IMEI's or is it just a generator??
I have replaced one of my original IMEI's that i had lost with a spare i had on another device, with different windows software (not an app) but i would like to get my lost original IMEI back. (The one on the back of the box, i still have)
I also backed the custom Rom at the time through TWRP, and have the nvram saved in this backup, but cannot find a way to restore my backup, (not sure why) or read the nvram to get the lost IMEI info.
If i can find a way to read the nvram info, i can the get my lost IMEI back and all will be good again.
Any help with this would be very welcome.
T.I.A...?
Click to expand...
Click to collapse
As far as I know Chamelephon recovers the original IMEI. It was used with success by Takee owners that lost IMEI during a custom ROM installation.
Sent from my takee 1 using XDA Labs
Ok, ill give it a try and hopefully it'll work.
Do you know of any way to extract and read the nvram and restore that folder??
fleebleflam said:
Ok, ill give it a try and hopefully it'll work.
Do you know of any way to extract and read the nvram and restore that folder??
Click to expand...
Click to collapse
Yes, go to DOOGEE Y6 Max - development & support thread by Alberto96. The first page has the method for NVRAM.
https://forum.xda-developers.com/android/general/doogee-y6-max-development-support-t3509692
Regarding Chamelephon you must enable first developer settings to recover the IMEI. Read here the advice of VladJocker.
https://forum.xda-developers.com/ge...1-review-3d-holographic-phone-t3202829/page95
EDIT-read the instructions of the Chamelephon app. Sorry!
*Mediatek 65XX devices supported only*
How to backup your NVRAM partition
http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Sent from my takee 1 using XDA Labs
I did think the Chamelephon app wasn't worth using, i think i may have even tried it in the past, but thanks anyway.
And thank you very much for this invaluable info regarding the nvram folder, it really is very much appreciated.
Thank you..?
I would like to buy EU model XQ-CT54 but before that i would like to know full modem capability(5g combinations etc).
So if any EU model user who has the device rooted could submit modem log https://cacombos.com/contribute (Qualcomm diag method) then it would be super helpful for me and others.
Preferably the log generation should be in 5G connection.
Thank you
Do you mean the XQ-CT54? When I google search for "XQ-CT52" I only get this thread as a result, so it seems like a typo.
Yeah sry, XQ-CT54. Brain autofilled from the asian model number.
mufunyo said:
Do you mean the XQ-CT54? When I google search for "XQ-CT52" I only get this thread as a result, so it seems like a typo.
Click to expand...
Click to collapse
Are you able to help with that request? I think you have the right model.
I am less concerned about the overheating bits of the phone, so modem capability is more important to me.
I guess there is Xperia 5 IV to wait for improvements.