Hi, I have a Tab 4 and it is in a bootloop, but the strange thing is that it actualy pass the logo an boot animation, when it reaches the welcome screen to setup the tablet, the tablet restats itself.
Once I actualy was able to pass the configutarion and use the tablet, but when i did a factory restore the table start with the bootloop again.
I have tried reinstaling two versions of the room with odin and all went ok but the tablet iss still on bootloop., and I havent been able to pass the welcom screen bucause it keeps restarting, also if I force the shutdown holding the power button the Tab turn on by itself until the battery die.
Related
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quañity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.
Okay, here's the situation. I was playing Minecraft PE on a server. While I was playing, all of a sudden, my tab stopped working and froze. Then I reset (power button >5 seconds) the tab. After that, I was stuck on the splash screen (shows Samsung Galaxy Tab 10.1). But I did set the settings to not show the boot animation during boot (this was a long time ago). I left it there for 2 hours++ and nothing happened. I even left it to drain until it shut down itself. I did a full charge, not working. I took out the battery overnight, not working. Only CWM recovery works. I tried to backup, but then was stuck on SettingsProvider.apk. I cleared cache and dalvik, not working. I didn't factory reset though as I will lose the entire Rom itself. I tried to sideload the rom on my pc, but Windows shows USB not recognized etc. I also tried going into download mode, but then same thing, windows does not recognize it. In ODIN, nothing shows up. I suspect a faulty cable, so I'll buy a new one. However, that couldn't make it bootloop in the first place. So I need help for this.. It has been almost a week. My ROM is SlimBean p4 20121211. Thanks in advance.
Hey,
I bought my S6 edge by pre-oredering from Vodafone in Qatar during April. I then shifted to India for university and went back to Qatar during December during vacations. During that time, when my phone was charging, it just switched off. When I started it again, the phone was stuck on the Samsung logo. I then restarted it by pressing Volume down+Power button but it kept happening. Then, I let it stay at the Samsung logo for half an hour and then restarted again. This time it started working.
But this problem would continue everytime I charge my phone. It would randomly start working sometimes when I restart but most of the times it would just get stuck. Now it's always stuck and I don't know what to do. Please help.
My LED light still flashes when the phone's stuck. And I haven't rooted my phone (just downloaded an app called root browser). I have done a factory reset and wiped the cache partition but it didn't solve the issue.
Ok, so one night I was using my phone normally (Browsing. Watching YouTube, Playing Games) like everyone else does. Then all of a sudden it shuts off, but immediately turns on again without me pressing a button. (So basically it suddenly auto restarts on its own) This occured maybe 2-4 times (all in one night) until one time, it shuts off but doesn't turn on again (basically an automatic shutdown), so I tried turning it on again (Power button), then I got shocked because all of a sudden it enters a boot loop (Screen displaying this sequence : Samsung Galaxy S4 screen, my carrier logo screen, The encrypted screen (where you have to enter your encryption password) then again the Samsung logo but this time with the colors splashing from the background, then it shuts off again.) Sometimes after the boot loop sequence, it vibrates but never turns on again, sometimes it just turns off after the sequence. And as I try and try to get away from the boot loop, the sequence became shorter. So I'm guessing it's a battery problem, BUT my battery isn't bloated or deformed. I tried clearing the cache first, again the sequence got shorter (never going up to the carrier logo screen), then I tried formatting the data, still to no avail. Now, when I turn it on, It shows the Samsung logo screen for 2 seconds and shuts down.
I tried flashing it with ODIN thru Download mode BUT (HERE'S where another problem occured) :
My phone never get pass on the system.img.ext4 dialogue and my screen just goes blank. But ODIN still recognizes my phone. And when I remove the USB cable, ODIN says FAIL.
I'm sure the cable is working. I downloaded the firmware for my carrier (Tre 3).
What could be the real problem here?
Here is the description of my device :
Samsung Galaxy GT-I9505
Bought from Italy, Tre 3 carrier
Can I download a different region/carrier for my I9505 phone?
Advanced thanks for anyone who comments and I'm very sorry for my English. Thanks!
I would install TWRP recovery, boot to it, and use it to format data, which will remove the encryption. Then I would either push a rom to the phone via recovery or try to reinstall the stock firmware with Odin. Make sure that you run Odin as admin as well. The firmware must be the same version or newer. If you still have the stock recovery and can boot to it, then I think the build number of the currently installed firmware will be visible there. You should be able to use that to Google the correct version you need.
Hey it's me. Just posting a quick reply.
Thanks for replying to my post. Yesterday I successfully flash a rom to my GT-I9505 (Version 5.0.1 Italy HUI 3G). However it still didn't boot up. At first try it booted up to the first setup screen then just randomly shuts down. Then as I try to boot it up again, It just shuts down after the first Samsung logo (with the GT-I9505 logo), I can't boot into recovery cause it shuts down. I'm sure it's not a battery issue cause when I boot into download mode, it can stay in that screen for like 10 minutes. What could be the issue? I'm planning to disassemble my S4 sooner to see if something's wrong inside. Thanks again for the reply
my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that thephone doesnt reboot,i only reboots when i try to leave it on
hi again,so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t