Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Ugo_M said:
Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Click to expand...
Click to collapse
Hello.
You have to flash TWRP one more time, then pull out battery. Put it in and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You have to do everything on time.
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
Ugo_M said:
Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Click to expand...
Click to collapse
And don`t worry about the message. It doesn`t affect your phone
Did you unpack twrp-3.0.2.0-0-h960a.img.zip? You have to flash just recovery.img
Hello.
You have to flash TWRP one more time, then pull out battery. Put it in and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You have to do everything on time.
Click to expand...
Click to collapse
Hello, I flashed TWRP again, and try to access to recovery like you said, but it didn't work. I don't think I'm doing the manipulation to go to the recovery wrong because I do the same thing on my G3 and it's working. But it's strange because I'm suppose to got to the factory reset menu but I didn't.
And don`t worry about the message. It doesn`t affect your phone
Did you unpack twrp-3.0.2.0-0-h960a.img.zip? You have to flash just recovery.img
Click to expand...
Click to collapse
Yes, I unpack the the zip file and just flash the recovery.img
Is there any way to restore the phone from the fastboot mode, or install a stock rom from there ?
Thanks for your time
Ugo_M said:
Hello, I flashed TWRP again, and try to access to recovery like you said, but it didn't work. I don't think I'm doing the manipulation to go to the recovery wrong because I do the same thing on my G3 and it's working. But it's strange because I'm suppose to got to the factory reset menu but I didn't.
Yes, I unpack the the zip file and just flash the recovery.img
Is there any way to restore the phone from the fastboot mode, or install a stock rom from there ?
Thanks for your time
Click to expand...
Click to collapse
How about LGUP and flash rom? Does it recognize your phone?
fixxxer102 said:
How about LGUP and flash rom? Does it recognize your phone?
Click to expand...
Click to collapse
Yes, LGUP recognize the phone but don't known the model
Ugo_M said:
Yes, LGUP recognize the phone but don't known the model
Click to expand...
Click to collapse
Plug a USB cable into your phone with your phone powered off, press Vol Up button and plug the USB cord into your computer. It should immediately boot into download mode
---------- Post added at 09:49 PM ---------- Previous post was at 09:42 PM ----------
Ugo_M said:
Yes, LGUP recognize the phone but don't known the model
Click to expand...
Click to collapse
and recopy common folder to lgup
fixxxer102 said:
Plug a USB cable into your phone with your phone powered off, press Vol Up button and plug the USB cord into your computer. It should immediately boot into download mode
---------- Post added at 09:49 PM ---------- Previous post was at 09:42 PM ----------
and recopy common folder to lgup
Click to expand...
Click to collapse
It's working, what should I do when I'm in the LGUP window ?
Ugo_M said:
It's working, what should I do when I'm in the LGUP window ?
Click to expand...
Click to collapse
Does LGUP recognized model? If yes, reflash kdz image of rom with refubrished option ticked.
---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------
Ugo_M said:
It's working, what should I do when I'm in the LGUP window ?
Click to expand...
Click to collapse
What country is your v10 from?
fixxxer102 said:
Does LGUP recognized model? If yes, reflash kdz image of rom with refubrished option ticked.
---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------
What country is your v10 from?
Click to expand...
Click to collapse
It's a European model, H960A, in France
Ugo_M said:
It's a European model, H960A, in France
Click to expand...
Click to collapse
Did you buy it in France or it is from french distribution? Are sure unlocking bootloader was succsseful?
H960A (V10) for Android M and the European market (Except France)
fixxxer102 said:
Did you buy it in France or it is from french distribution? Are sure unlocking bootloader was successful?
H960A (V10) for Android M and the European market (Except France)
Click to expand...
Click to collapse
I buy it on Amazon, from a Portuguese sealer. For the bootloader I think it's successful, the adb command to verify if the bootloader was unlocked returned yes.
PS : I don't now if it is useful but the update to android 6.0 wasn't working on the phone directly, I had to use LG Bridge.
Ugo_M said:
I buy it on Amazon, from a Portuguese sealer. For the bootloader I think it's successful, the adb command to verify if the bootloader was unlocked returned yes.
PS : I don't now if it is useful but the update to android 6.0 wasn't working on the phone directly, I had to use LG Bridge.
Click to expand...
Click to collapse
Download rom http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB4HCR552O4AZ33FDA3QM3/H960A20a_00_0316.kdz
It`s from post: http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Then flash with LGUP. refubrished ticked.
fixxxer102 said:
Download rom http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB4HCR552O4AZ33FDA3QM3/H960A20a_00_0316.kdz
It`s from post: http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Then flash with LGUP. refubrished ticked.
Click to expand...
Click to collapse
It work, thanks you !
Ugo_M said:
It work, thanks you !
Click to expand...
Click to collapse
you're welcome
Related
I installed it with the command and when I go to the Erase and wipe data screen and press "yes" to everything, shows "erasing" and, of course, my phone erased all my data. I tried it a few times, so I don't want to lose my data again. So, there is anyone with h850 rooted?
If you are looking on how to properly root your lg h850 just check out this guide. http://forum.xda-developers.com/lg-g5/development/official-european-lg-g5-h850-bootloader-t3363040
Dileter said:
If you are looking on how to properly root your lg h850 just check out this guide. http://forum.xda-developers.com/lg-g5/development/official-european-lg-g5-h850-bootloader-t3363040
Click to expand...
Click to collapse
Okey, I followed all the steps, but after step 9, instead of booting into recovery, it deletes all my data
Santiagofamo said:
Okey, I followed all the steps, but after step 9, instead of booting into recovery, it deletes all my data
Click to expand...
Click to collapse
Read what is under step 9 and if you want to flash twrp and root it you will need to delete your data atlest once just save a backup and back it all up again after finishing. You have to unplug the usb cable and take out the battery and then hold volume down and the power button as soon as you see the LG logo you let go of the power button and then press it again right away then continue to hold volume down and the power button untill you see a screen (you hold the volume down while letting go of the power button at the lg logo) When you see the screen you just navigate using the volume keys and the power button to "yes" on both of the options then it will enter recovery mode. (You dont need to hold anything after that screen comes up)
---------- Post added at 06:34 PM ---------- Previous post was at 06:31 PM ----------
Hope that helps.
Dileter said:
Read what is under step 9 and if you want to flash twrp and root it you will need to delete your data atlest once just save a backup and back it all up again after finishing. You have to unplug the usb cable and take out the battery and then hold volume down and the power button as soon as you see the LG logo you let go of the power button and then press it again right away then continue to hold volume down and the power button untill you see a screen (you hold the volume down while letting go of the power button at the lg logo) When you see the screen you just navigate using the volume keys and the power button to "yes" on both of the options then it will enter recovery mode. (You dont need to hold anything after that screen comes up)
---------- Post added at 06:34 PM ---------- Previous post was at 06:31 PM ----------
Hope that helps.
Click to expand...
Click to collapse
I did everything but in the last step, when I select "yes" on both options it just wipes all my data instead of going to TWRP. Thanks in advance
Santiagofamo said:
I did everything but in the last step, when I select "yes" on both options it just wipes all my data instead of going to TWRP. Thanks in advance
Click to expand...
Click to collapse
So you are saying that TWRP never boots? Are you loading the latest TWRP 3.0.2.0-1 ?
Have you ever successfully booted TWRP?
Pphish20 said:
So you are saying that TWRP never boots? Are you loading the latest TWRP 3.0.2.0-1 ?
Have you ever successfully booted TWRP?
Click to expand...
Click to collapse
-Yes, instead of booting, erases all my data
-Yes
-No
Santiagofamo said:
-Yes, instead of booting, erases all my data
-Yes
-No
Click to expand...
Click to collapse
And on your PC, fastboot isn't giving you any errors? It's claiming it was successfully flashed? H850 from what region?
Pphish20 said:
And on your PC, fastboot isn't giving you any errors? It's claiming it was successfully flashed? H850 from what region?
Click to expand...
Click to collapse
Okey, so the problem was that I didn't plug phone into PC when I did last steps. I'm a bit retard. Thanks to everyone for helping.
Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
FelipeRsN said:
Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
Click to expand...
Click to collapse
Is it in warranty??
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
FelipeRsN said:
Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
Click to expand...
Click to collapse
Is it turning on and stuck in logo or its not even turning on??
hassanjavaid8181 said:
Is it in warranty??
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
Is it turning on and stuck in logo or its not even turning on??
Click to expand...
Click to collapse
I press the button and not happen, no logo, no recovery or download mode..
Completely died
FelipeRsN said:
I press the button and not happen, no logo, no recovery or download mode..
Completely died
Click to expand...
Click to collapse
Visiting huawei service center would be best option.
I have the same problem, tried to restore my Phone with DC Phoenix and after DC finished the phone just died, no loading, no usb, no turn on, no fastboot, no recovery. Just black and dead.
4r44444 said:
I have the same problem, tried to restore my Phone with DC Phoenix and after DC finished the phone just died, no loading, no usb, no turn on, no fastboot, no recovery. Just black and dead.
Click to expand...
Click to collapse
Did you fixed your device??
hassanjavaid8181 said:
Did you fixed your device??
Click to expand...
Click to collapse
Nope
Bruv,
Had the exact same problem after an OTA update.
Don't waste money on DC-unlocker and funkyHuawei, just send it back and see what they tell you.
Even if in Warranty or not (or bootloader unclocked) just send it back. They are the only ones that can do a full board wipe (low level format).
Sorry.
I factory reset in twrp and now no system and no backup only have twrp....help please I really need system files for us998 that i can flash in twrp please help
cajun9924 said:
I factory reset in twrp and now no system and no backup only have twrp....help please I really need system files for us998 that i can flash in twrp please help
Click to expand...
Click to collapse
Use lg bridge to reset your phone. Not sure if it will relock your bootloader. Anyways you can install twrp again after a reset.
LG Bridge does not see phone. It only boots in recovery
Sent from my [device_name] using XDA-Developers Legacy app
cajun9924 said:
LG Bridge does not see phone. It only boots in recovery
Click to expand...
Click to collapse
Have you tried download mode power + vol down
R800x_user said:
Have you tried download mode power + vol down
Click to expand...
Click to collapse
Download mode worked used lg up to flash kdz and rooted all over again. All good now thanks very much
Sent from my [device_name] using XDA-Developers Legacy app
cajun9924 said:
Download mode worked used lg up to flash kdz and rooted all over again. All good now thanks very much
Click to expand...
Click to collapse
So u can get into twrp? Can u tell me how u get into twrp because I try but nothing helps? Mine phone is a us988 and I am having the same problem as yours. I try lgup but kept getting an error message.
xiong77 said:
So u can get into twrp? Can u tell me how u get into twrp because I try but nothing helps? Mine phone is a us988 and I am having the same problem as yours. I try lgup but kept getting an error message.
Click to expand...
Click to collapse
If you still have TWRP installed, here are the instructions for booting to recovery via hardware buttos, aka "button dance". The hardware "button dance" takes good eye/hand coordimation...
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times to say yes three different times, like it says. Even though it says it will delete everything, it won't.
6. After a "factory reset processing" appears, you should get the TWRP flash screen.
ChazzMatt said:
If you still have TWRP installed, here are the instructions for booting to recovery via hardware buttos, aka "button dance". The hardware "button dance" takes good eye/hand coordimation...
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times to say yes three different times, like it says. Even though it says it will delete everything, it won't.
6. After a "factory reset processing" appears, you should get the TWRP flash screen.
Click to expand...
Click to collapse
Mine is different. I first get the error message that about your device software cannot be displayed.
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
xiong77 said:
Mine is different. I first get the error message that about your device software cannot be displayed.
Click to expand...
Click to collapse
Seems like the phone won't completely shut off. Keeps rebooting everytime. I guess I'll have to try lgup again. Do know why I'm getting an error message from LGup?
xiong77 said:
Mine is different. I first get the error message that about your device software cannot be displayed.
Click to expand...
Click to collapse
That's just the bootloader unlock warning. Ignore that.
You'll see that even booting into TWRP.
Keep holding the buttons like the instructions say.
ChazzMatt said:
That's just the bootloader unlock warning. Ignore that.
You'll see that even booting into TWRP.
Keep holding the buttons like the instructions say.
Click to expand...
Click to collapse
OK will try
Hello, I have this phone for 2 years. I tried to root in the past 5 months but no success because I flashed the TWRP recovery that i found in here but is for J5 2017 with Android 7, and mine have latest Android 9.
How I can find a recovery compatible with latest android 9? Thanks!
Sorry for bad grammar. I don't speak English mainly.
Edit: Edit: My phone still works now with latest stock android 9. But aparently the bootloader is so locked down even if I try to revert to android oreo it doesn't flash, only if i leave the phone full 7 days without disconnecting from sim network. Unfortunately i cannot maintain connected to celular sim( or whatever is called) because i live in vilage that i cannot catch good celular signal.
So for me, this phone is unrootable to me.
So. I'm done rooting!
Remix os user said:
Hello, I have this phone for 2 years. I tried to root in the past 5 months but no success because I flashed the TWRP recovery that i found in here but is for J5 2017 with Android 7, and mine have latest Android 9.
How I can find a recovery compatible with latest android 9? Thanks!
Sorry for bad grammar. I don't speak English mainly.
Click to expand...
Click to collapse
Does it even boot into recovery ?
prashantp01 said:
Does it even boot into recovery ?
Click to expand...
Click to collapse
When i did last time, it does boot in to recovery, when i wipe the data, cache, dalvik cache it doesn't want to wipe cuz is in read only , and when i boot normaly its doing boot loop and eventualy i kinda give up and flash the stock rom back.
As i can see your device has twrp, and many users faced same issue, what i'll suggest you now is flash this twrp from below guide, after that format data, wipe your system and flash any other pie rom which exist for your device with latest magisk... if the issue still exist you can pm me with the same
https://forum.xda-developers.com/ga...nt/guide-root-twrp-recovery-sm-j530f-t3685871
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
Remix os user said:
When i did last time, it does boot in to recovery, when i wipe the data, cache, dalvik cache it doesn't want to wipe cuz is in read only , and when i boot normaly its doing boot loop and eventualy i kinda give up and flash the stock rom back.
Click to expand...
Click to collapse
you need to format data instead of wiping data
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
also after this flash a custom pie rom with latest magisk and it should work
prashantp01 said:
As i can see your device has twrp, and many users faced same issue, what i'll suggest you now is flash this twrp from below guide, after that format data, wipe your system and flash any other pie rom which exist for your device with latest magisk... if the issue still exist you can pm me with the same
https://forum.xda-developers.com/ga...nt/guide-root-twrp-recovery-sm-j530f-t3685871
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
you need to format data instead of wiping data
Click to expand...
Click to collapse
i did try to format data but no success. and also i didn't mention to install a custom rom because i need to have a functional sim to call and sms
prashantp01 said:
As i can see your device has twrp, and many users faced same issue, what i'll suggest you now is flash this twrp from below guide, after that format data, wipe your system and flash any other pie rom which exist for your device with latest magisk... if the issue still exist you can pm me with the same
https://forum.xda-developers.com/ga...nt/guide-root-twrp-recovery-sm-j530f-t3685871
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
you need to format data instead of wiping data
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
also after this flash a custom pie rom with latest magisk and it should work
Click to expand...
Click to collapse
what custom rom should work with sm-j530f/ds, to have sim, wifi and bluetooth working?
Remix os user said:
i did try to format data but no success. and also i didn't mention to install a custom rom because i need to have a functional sim to call and sms
Click to expand...
Click to collapse
give me like few minutes, i'm asking few j5 friends
---------- Post added at 10:18 AM ---------- Previous post was at 10:13 AM ----------
Remix os user said:
what custom rom should work with sm-j530f/ds, to have sim, wifi and bluetooth working?
Click to expand...
Click to collapse
Well here i have solution:
NEW TWRP: https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
STEPS:
Download Odin v3.13.1
Download and install Samsung Drivers (if you have them installed you can skip this step)
Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
Download TWRP_*.tar
Switch off the phone
Use Home+Volume Down+Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put TWRP_*.tar.md5 file into AP tab
Click Start
When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Home" + "Vol. Down" + "Power" buttons until the downoad mode disappears
At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Home" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
If it didn`t worked, redo the steps from #1 more careful this time.
prashantp01 said:
give me like few minutes, i'm asking few j5 friends
---------- Post added at 10:18 AM ---------- Previous post was at 10:13 AM ----------
Well here i have solution:
NEW TWRP: https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
STEPS:
Download Odin v3.13.1
Download and install Samsung Drivers (if you have them installed you can skip this step)
Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
Download TWRP_*.tar
Switch off the phone
Use Home+Volume Down+Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put TWRP_*.tar.md5 file into AP tab
Click Start
When Odin shows "PASS", take your device in hands, disconnect the usb cable and press simultaneously the "Home" + "Vol. Down" + "Power" buttons until the downoad mode disappears
At the precise moment the screen becomes black, immediately release the "Vol.Down" button and press the "Home" + "Vol. UP" + "Power" buttons during 10 to 15sec to forcefully enter TWRP
If it didn`t worked, redo the steps from #1 more careful this time.
Click to expand...
Click to collapse
how i can download this ''TWRP'' ?
https://imgur.com/a/Ew2z5G0
i dont see an twrp. tar or twrp. img
Remix os user said:
how i can download this ''TWRP'' ?
https://imgur.com/a/Ew2z5G0
i dont see an twrp. tar or twrp. img
Click to expand...
Click to collapse
under assets
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases/tag/TWRP_3.3_J5Y17LTE
prashantp01 said:
under assets
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases/tag/TWRP_3.3_J5Y17LTE
Click to expand...
Click to collapse
ok, i will try later because i'm busy to fix a PC
prashantp01 said:
under assets
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases/tag/TWRP_3.3_J5Y17LTE
Click to expand...
Click to collapse
ok, i will try later because i'm busy to fix a PC.
ok. i tryed to flash twrp and my phone is bricked( boot loop), i can boot to recovery but i can't boot normaly, now i'm going to flash the stock rom back.
edit: now i'm gonna to give up rooting this phone.
Edit: My phone still works now with latest stock android 9. But aparently the bootloader is so locked down even if I try to revert to android oreo it doesn't flash, only if i leave the phone full 7 days without disconnecting from sim network will unlock it. Unfortunately i cannot maintain connected to celular sim( or whatever is called) because i live in vilage that i cannot catch good celular signal.
So for me, this phone is unrootable to me. I giving up of rooting this device!
Hi to everyone..i need a great help..after a forced reboot (hold power button for 15 sec) my huawei p20 lite has gone in boot loop..i can see only the huawei logo, and sometimes it reboot for see the huawei logo again..don't want go into recovery and in others mode..the only mode that works it's fastboot..i don't want lose my data, can i reflash the firmware without wipe data? really thanks..sorry for my bad english.. ps. the phone is total stock with bootloader locked...thanks..
dani.9 said:
Hi to everyone..i need a great help..after a forced reboot (hold power button for 15 sec) my huawei p20 lite has gone in boot loop..i can see only the huawei logo, and sometimes it reboot for see the huawei logo again..don't want go into recovery and in others mode..the only mode that works it's fastboot..i don't want lose my data, can i reflash the firmware without wipe data? really thanks..sorry for my bad english.. ps. the phone is total stock with bootloader locked...thanks..
Click to expand...
Click to collapse
Hello,
my English is no better than yours, don't worry .
Try this way out - turn off your phone (if it's possible), connect it to the PC, then press and hold Power and Volume Up. The phone should boot into e-Recovery (in normal circumstances, it may not work in your case). Use "Emergency backup" option.
IMO there's no other way to save your data in internal storage.
-Alf- said:
Hello,
my English is no better than yours, don't worry .
Try this way out - turn off your phone (if it's possible), connect it to the PC, then press and hold Power and Volume Up. The phone should boot into e-Recovery (in normal circumstances, it may not work in your case). Use "Emergency backup" option.
IMO there's no other way to save your data in internal storage.
Click to expand...
Click to collapse
thanks for your reply..this make me sad..not happen when i press and hold volume up..the same screen with huawei logo...what do you think about dload method? the firmware will be erase my data?
dani.9 said:
not happen when i press and hold volume up.
Click to expand...
Click to collapse
I wrote "press and hold Power and Volume Up".
---------- Post added at 21:54 ---------- Previous post was at 21:52 ----------
dani.9 said:
dload method? the firmware will be erase my data?
Click to expand...
Click to collapse
Yes. But without access to Recovery it's only academic question...
-Alf- said:
I wrote "press and hold Power and Volume Up".
Click to expand...
Click to collapse
sorry, yes i press this combo but nothing, the phone turn on and show huawei logo...maybe i can put the phone in erecovery by fast boot command?
dani.9 said:
sorry, yes i press this combo but nothing, the phone turn on and show huawei logo...maybe i can put the phone in erecovery by fast boot command?
Click to expand...
Click to collapse
Fastboot not allowed in locked state.
-Alf- said:
Fastboot not allowed in locked state.
Click to expand...
Click to collapse
Damn..i'm really sad..thank for your help...however, what do you mean with "academic question"?
dani.9 said:
Damn..i'm really sad..thank for your help...however, what do you mean with "academic question"?
Click to expand...
Click to collapse
P.S.: The last chance is to completely discharge the battery. Sometimes it helps.
I can't help you anymore bro.
-Alf- said:
P.S.: The last chance is to completely discharge the battery. Sometimes it helps.
I can't help you anymore bro.
Click to expand...
Click to collapse
also tried my friend but nothing...don't matter..really really thanks...
dani.9 said:
what do you mean with "academic question"?
Click to expand...
Click to collapse
You can't enter Recovery, how do you want to use dload method??
---------- Post added at 22:18 ---------- Previous post was at 22:16 ----------
dani.9 said:
really really thanks...
Click to expand...
Click to collapse
No problem .
-Alf- said:
You can't enter Recovery, how do you want to use dload method??
---------- Post added at 22:18 ---------- Previous post was at 22:16 ----------
No problem .
Click to expand...
Click to collapse
in this video
https://www.youtube.com/watch?v=R8gHj1JIiRs&has_verified=1
the guy (around min 5:30) press volume + and volume - together
dani.9 said:
in this video
https://www.youtube.com/watch?v=R8gHj1JIiRs&has_verified=1
the guy (around min 5:30) press volume + and volume - together
Click to expand...
Click to collapse
Dude, I know how to use dload method , but you wrote "don't want go into recovery and in others mode" , it means you can't boot into Recovery mode (correct me...)
I'm not sure I fully understand your questions...
-Alf- said:
Dude, I know how to use dload method , but you wrote "don't want go into recovery and in others mode" , it means you can't boot into Recovery mode (correct me...)
I'm not sure I fully understand your questions...
Click to expand...
Click to collapse
yes it's true..but press only volume + (that not works for me) it's different that press volume + and volume - right? maybe if i put the file in the sd cart it will work? sorry if i tell bull**** but i'm disperated
dani.9 said:
yes it's true..but press only volume + (that not works for me) it's different that press volume + and volume - right?
Click to expand...
Click to collapse
it seems you don't know how to enter Recovery and eRecovery on EMUI 9 (with all due respect). Google it and try again.
---------- Post added at 23:30 ---------- Previous post was at 23:16 ----------
And keep in mind, since EMUI 8 you can flash via dload method Service ROM only. Service ROM can be found here:
https://androidhost.ru/search.html
Type ANE- or ANNE- .
Select only ROM for your region (Cxxx) and current EMUI version. Follow instructions (can be found in file ReleaseDoc after .zip archiv unpacking.
-Alf- said:
it seems you don't know how to enter Recovery and eRecovery on EMUI 9 (with all due respect). Google it and try again.
---------- Post added at 23:30 ---------- Previous post was at 23:16 ----------
And keep in mind, since EMUI 8 you can flash via dload method Service ROM only. Service ROM can be found here:
https://androidhost.ru/search.html
Type ANE- or ANNE- .
Select only ROM for your region (Cxxx) and current EMUI version. Follow instructions (can be found in file ReleaseDoc after .zip archiv unpacking.
Click to expand...
Click to collapse
don't worry...please don't hungry with me if i make somethings of wrong...right, this method, with service rom, erase my data? (sorry if i ask again)...and where i can found (Cxxx)?
dani.9 said:
don't worry...please don't hungry with me if i make somethings of wrong...right, this method, with service rom, erase my data? (sorry if i ask again)...and where i can found (Cxxx)?
Click to expand...
Click to collapse
Yes, the process will erase all your data.
....
The first step is to determine which variant of your device you are on. The first section e.g. “ANE-LX1” is your model number, the middle “9.1.0.178” is the build number, and the bracketed (C432, C185 etc etc) is your device’s regional variant. This number is very important in determining the correct firmware to download!
do you remember your build number?
-Alf- said:
Yes, the process will erase all your data.
....
The first step is to determine which variant of your device you are on. The first section e.g. “ANE-LX1” is your model number, the middle “9.1.0.178” is the build number, and the bracketed (C432, C185 etc etc) is your device’s regional variant. This number is very important in determining the correct firmware to download!
do you remember your build number?
Click to expand...
Click to collapse
no i don't remember my buid..maybe i have an idea..tomorrow (ore 00.20 AM in italy now) i can try to use dr phone...or wipe data with dload method and after use dr phone or others program for recovery my data..
dani.9 said:
or wipe data with dload method and after use dr phone or others program for recovery my data..
Click to expand...
Click to collapse
I think it's time to go sleep... Recovery data after data wiping?