Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
FelipeRsN said:
Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
Click to expand...
Click to collapse
Is it in warranty??
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
FelipeRsN said:
Hello,I'm facing a problem in my Huawei honor 9. I tryed to install a firmware from the guide method but a bug cancel the process, so I tryed to restore the factory rom to try again.*
*
But my device shut off and don't turn on, not opening recovery and not opening download mode, just died. What's can I do?
Please
Click to expand...
Click to collapse
Is it turning on and stuck in logo or its not even turning on??
hassanjavaid8181 said:
Is it in warranty??
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
Is it turning on and stuck in logo or its not even turning on??
Click to expand...
Click to collapse
I press the button and not happen, no logo, no recovery or download mode..
Completely died
FelipeRsN said:
I press the button and not happen, no logo, no recovery or download mode..
Completely died
Click to expand...
Click to collapse
Visiting huawei service center would be best option.
I have the same problem, tried to restore my Phone with DC Phoenix and after DC finished the phone just died, no loading, no usb, no turn on, no fastboot, no recovery. Just black and dead.
4r44444 said:
I have the same problem, tried to restore my Phone with DC Phoenix and after DC finished the phone just died, no loading, no usb, no turn on, no fastboot, no recovery. Just black and dead.
Click to expand...
Click to collapse
Did you fixed your device??
hassanjavaid8181 said:
Did you fixed your device??
Click to expand...
Click to collapse
Nope
Bruv,
Had the exact same problem after an OTA update.
Don't waste money on DC-unlocker and funkyHuawei, just send it back and see what they tell you.
Even if in Warranty or not (or bootloader unclocked) just send it back. They are the only ones that can do a full board wipe (low level format).
Sorry.
Related
I've really search everywhere for an answer and I hope somebody here can help me.
I had resurrection remix 2.5.1 on my phone and tried to update to 2.5.3. It installed but then when it rebooted, it got stuck on a boot loop.
My home button on my phone is not working so i used android sdk to reboot into recovery and restored my phone to a previous backup, I then downloaded 2.5.3 from my computer to phone and tried to reinstall and wipe cache etc, which worked, the rom installed, i rebooted and it worked.
Because I had just done a titanium back up before i tried to install 2.5.3 and i went back to a previous back up, i wanted to wipe the phone (because i had crap on it) and then reinstall some apps. When I did a wipe i did it through the phone, and when I booted back on, this is where the problem started.
My phone now turns on with the Galaxy S2 logo and then theres no boot animation, just a black screen which you can just about see that it is flashing. I tried to use android sdk to reboot into recovery but it wouldnt work. I didn't want the hassle so I brought a Jig, which doesn't do anything at all,l i've tried with the battery in and out memory card in and out and pressing buttoms. I thought it might have been entering download mode without the screen so I plugged it in and it isn't detected by odin BUT I have notice that sometimes the phone looks like its about to charge but when the battery icon comes up, the circle inside it does not move and then it disappears.
So to summarise, stuck on SG2 Boot logo, just notice blinking screen. My menu button is broken and jig doesn't work. Not detected by odin and wont boot through android sdk...
Sorry for the essay but I hope someone out there can help me!!!
No download mode, jig doesn't work, nothing with ADB = service centre. No other options.
MistahBungle said:
No download mode, jig doesn't work, nothing with ADB = service centre. No other options.
Click to expand...
Click to collapse
Oh god, I was really hoping this wasn't going to be the answer, thanks anyway
MistahBungle said:
No download mode, jig doesn't work, nothing with ADB = service centre. No other options.
Click to expand...
Click to collapse
One question though, will they be able to tell I've rooted it when I sent it to samsung and invalidate my warranty?
Hi mate, firstly can you confirm successfully flashed RR 2.5.3..?? RR came with its own Boot Logo and not SG2 Boot Logo.
USB Jig only works on older Bootloader...e.g Gingerbread 2.3.4.
VolumeDown + HomeButton + PowerButton still working for you..??
---------- Post added at 09:38 PM ---------- Previous post was at 09:35 PM ----------
microphonehead said:
One question though, will they be able to tell I've rooted it when I sent it to samsung and invalidate my warranty?
Click to expand...
Click to collapse
They can tell in Download Mode. Increase in Binary counter + Custom Rom....so good luck mate.
badboys8908 said:
Hi mate, firstly can you confirm successfully flashed RR 2.5.3..?? RR came with its own Boot Logo and not SG2 Boot Logo.
USB Jig only works on older Bootloader...e.g Gingerbread 2.3.4.
VolumeDown + HomeButton + PowerButton still working for you..??
---------- Post added at 09:38 PM ---------- Previous post was at 09:35 PM ----------
They can tell in Download Mode. Increase in Binary counter + Custom Rom....so good luck mate.
Click to expand...
Click to collapse
Well it says samsung galaxy s2 before then going onto a boot animation which was a stock android animation of the word android which I did think was odd
But now it just says samsung galaxy s2 without any boot animation.
And my menu button doesn't work... I guess i'll have to buy another one if its my last hope...
microphonehead said:
Well it says samsung galaxy s2 before then going onto a boot animation which was a stock android animation of the word android which I did think was odd
But now it just says samsung galaxy s2 without any boot animation.
And my menu button doesn't work... I guess i'll have to buy another one if its my last hope...
Click to expand...
Click to collapse
VolumeDown + HomeButton + PowerButton = Download Mode
No need Menu Button and getting Samsung Galaxy S2 before going onto Boot Animation is definitely very odd...
badboys8908 said:
VolumeDown + HomeButton + PowerButton = Download Mode
No need Menu Button and getting Samsung Galaxy S2 before going onto Boot Animation is definitely very odd...
Click to expand...
Click to collapse
I meant home button! Sorry!
I thought it always showed Samsung galaxy s2 before the boot animation? like this /watch?v=mQz3JJu_vDc
microphonehead said:
I meant home button! Sorry!
I thought it always showed Samsung galaxy s2 before the boot animation?
Click to expand...
Click to collapse
Sorry mate, if you cant get into DownloadMode then getting a new mobo will be next...
badboys8908 said:
Sorry mate, if you cant get into DownloadMode then getting a new mobo will be next...
Click to expand...
Click to collapse
Just want to say, I sent my phone to samsung last thursday and today received an almost new phone! Woohoo!
microphonehead said:
I've really search everywhere for an answer and I hope somebody here can help me.
I had resurrection remix 2.5.1 on my phone and tried to update to 2.5.3. It installed but then when it rebooted, it got stuck on a boot loop.
My home button on my phone is not working so i used android sdk to reboot into recovery and restored my phone to a previous backup, I then downloaded 2.5.3 from my computer to phone and tried to reinstall and wipe cache etc, which worked, the rom installed, i rebooted and it worked.
Because I had just done a titanium back up before i tried to install 2.5.3 and i went back to a previous back up, i wanted to wipe the phone (because i had crap on it) and then reinstall some apps. When I did a wipe i did it through the phone, and when I booted back on, this is where the problem started.
My phone now turns on with the Galaxy S2 logo and then theres no boot animation, just a black screen which you can just about see that it is flashing. I tried to use android sdk to reboot into recovery but it wouldnt work. I didn't want the hassle so I brought a Jig, which doesn't do anything at all,l i've tried with the battery in and out memory card in and out and pressing buttoms. I thought it might have been entering download mode without the screen so I plugged it in and it isn't detected by odin BUT I have notice that sometimes the phone looks like its about to charge but when the battery icon comes up, the circle inside it does not move and then it disappears.
So to summarise, stuck on SG2 Boot logo, just notice blinking screen. My menu button is broken and jig doesn't work. Not detected by odin and wont boot through android sdk...
Sorry for the essay but I hope someone out there can help me!!!
Click to expand...
Click to collapse
Try for download mode.
---------- Post added at 10:22 PM ---------- Previous post was at 10:22 PM ----------
microphonehead said:
One question though, will they be able to tell I've rooted it when I sent it to samsung and invalidate my warranty?
Click to expand...
Click to collapse
No.
---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------
That's good news.
Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Ugo_M said:
Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Click to expand...
Click to collapse
Hello.
You have to flash TWRP one more time, then pull out battery. Put it in and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You have to do everything on time.
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
Ugo_M said:
Hello, I wanted to root my new LG V10 phone, H960A european model.
So I had to install to install twrp.
First I unlocked the bootloader, using the lg official tutorial, then I use adb to flash twrp-3.0.2.0-0-h960a.img.
After that, I turned off the v10 and tried to restart to recovery by pressing power and volume down, then release when the lg logo appears, and finally press again. But it didn't work, I think because of a message that appears after I unlock the bootloader that say "Your device software can't be checked for corruption" with an orange warning triangle. After this the phone start normally, then it start to optimize the app but when the optimization is end, the phone make the lg power on sound and restart, then do the same things again and again. Also, he occasionally make a sound and viber but not always.
I don't now what to do because I can go to recovery, or download mode plus I can't use the adb orders because my computer don't found the device.
So if anyone have and idea of how to solve that problem.
Thanks for your time.
Click to expand...
Click to collapse
And don`t worry about the message. It doesn`t affect your phone
Did you unpack twrp-3.0.2.0-0-h960a.img.zip? You have to flash just recovery.img
Hello.
You have to flash TWRP one more time, then pull out battery. Put it in and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again. You have to do everything on time.
Click to expand...
Click to collapse
Hello, I flashed TWRP again, and try to access to recovery like you said, but it didn't work. I don't think I'm doing the manipulation to go to the recovery wrong because I do the same thing on my G3 and it's working. But it's strange because I'm suppose to got to the factory reset menu but I didn't.
And don`t worry about the message. It doesn`t affect your phone
Did you unpack twrp-3.0.2.0-0-h960a.img.zip? You have to flash just recovery.img
Click to expand...
Click to collapse
Yes, I unpack the the zip file and just flash the recovery.img
Is there any way to restore the phone from the fastboot mode, or install a stock rom from there ?
Thanks for your time
Ugo_M said:
Hello, I flashed TWRP again, and try to access to recovery like you said, but it didn't work. I don't think I'm doing the manipulation to go to the recovery wrong because I do the same thing on my G3 and it's working. But it's strange because I'm suppose to got to the factory reset menu but I didn't.
Yes, I unpack the the zip file and just flash the recovery.img
Is there any way to restore the phone from the fastboot mode, or install a stock rom from there ?
Thanks for your time
Click to expand...
Click to collapse
How about LGUP and flash rom? Does it recognize your phone?
fixxxer102 said:
How about LGUP and flash rom? Does it recognize your phone?
Click to expand...
Click to collapse
Yes, LGUP recognize the phone but don't known the model
Ugo_M said:
Yes, LGUP recognize the phone but don't known the model
Click to expand...
Click to collapse
Plug a USB cable into your phone with your phone powered off, press Vol Up button and plug the USB cord into your computer. It should immediately boot into download mode
---------- Post added at 09:49 PM ---------- Previous post was at 09:42 PM ----------
Ugo_M said:
Yes, LGUP recognize the phone but don't known the model
Click to expand...
Click to collapse
and recopy common folder to lgup
fixxxer102 said:
Plug a USB cable into your phone with your phone powered off, press Vol Up button and plug the USB cord into your computer. It should immediately boot into download mode
---------- Post added at 09:49 PM ---------- Previous post was at 09:42 PM ----------
and recopy common folder to lgup
Click to expand...
Click to collapse
It's working, what should I do when I'm in the LGUP window ?
Ugo_M said:
It's working, what should I do when I'm in the LGUP window ?
Click to expand...
Click to collapse
Does LGUP recognized model? If yes, reflash kdz image of rom with refubrished option ticked.
---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------
Ugo_M said:
It's working, what should I do when I'm in the LGUP window ?
Click to expand...
Click to collapse
What country is your v10 from?
fixxxer102 said:
Does LGUP recognized model? If yes, reflash kdz image of rom with refubrished option ticked.
---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------
What country is your v10 from?
Click to expand...
Click to collapse
It's a European model, H960A, in France
Ugo_M said:
It's a European model, H960A, in France
Click to expand...
Click to collapse
Did you buy it in France or it is from french distribution? Are sure unlocking bootloader was succsseful?
H960A (V10) for Android M and the European market (Except France)
fixxxer102 said:
Did you buy it in France or it is from french distribution? Are sure unlocking bootloader was successful?
H960A (V10) for Android M and the European market (Except France)
Click to expand...
Click to collapse
I buy it on Amazon, from a Portuguese sealer. For the bootloader I think it's successful, the adb command to verify if the bootloader was unlocked returned yes.
PS : I don't now if it is useful but the update to android 6.0 wasn't working on the phone directly, I had to use LG Bridge.
Ugo_M said:
I buy it on Amazon, from a Portuguese sealer. For the bootloader I think it's successful, the adb command to verify if the bootloader was unlocked returned yes.
PS : I don't now if it is useful but the update to android 6.0 wasn't working on the phone directly, I had to use LG Bridge.
Click to expand...
Click to collapse
Download rom http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB4HCR552O4AZ33FDA3QM3/H960A20a_00_0316.kdz
It`s from post: http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Then flash with LGUP. refubrished ticked.
fixxxer102 said:
Download rom http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB4HCR552O4AZ33FDA3QM3/H960A20a_00_0316.kdz
It`s from post: http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
Then flash with LGUP. refubrished ticked.
Click to expand...
Click to collapse
It work, thanks you !
Ugo_M said:
It work, thanks you !
Click to expand...
Click to collapse
you're welcome
I wanted to flash the stock kernel on my E2333 after I got stuck on TWRP 3.0. I tried to make a flashable zip. Seems i messed up with the mmsblxxx device specific info ! It flashed with no errors in twrp. When i pressed reboot, the phone never switched on again When i try to enter flashmode or fastboot mode, a red LED notification blinks on and off. I tried all button combinations. It doesn't power on at all !. Someone please help !!
Prinz` said:
I wanted to flash the stock kernel on my E2333 after I got stuck on TWRP 3.0. I tried to make a flashable zip. Seems i messed up with the mmsblxxx device specific info ! It flashed with no errors in twrp. When i pressed reboot, the phone never switched on again When i try to enter flashmode or fastboot mode, a red LED notification blinks on and off. I tried all button combinations. It doesn't power on at all !. Someone please help !!
Click to expand...
Click to collapse
Congratulations sir, you just hard bricked your phone. Take it to the service centre.
---------- Post added at 23:43 ---------- Previous post was at 23:42 ----------
Prinz` said:
I wanted to flash the stock kernel on my E2333 after I got stuck on TWRP 3.0. I tried to make a flashable zip. Seems i messed up with the mmsblxxx device specific info ! It flashed with no errors in twrp. When i pressed reboot, the phone never switched on again When i try to enter flashmode or fastboot mode, a red LED notification blinks on and off. I tried all button combinations. It doesn't power on at all !. Someone please help !!
Click to expand...
Click to collapse
When it's red light blinking, that's usually the indicator for the battery. But in you case, I don't think your battery was empty, or maybe I'm wrong?
ekin_strops said:
Congratulations sir, you just hard bricked your phone. Take it to the service centre.
---------- Post added at 23:43 ---------- Previous post was at 23:42 ----------
When it's red light blinking, that's usually the indicator for the battery. But in you case, I don't think your battery was empty, or maybe I'm wrong?
Click to expand...
Click to collapse
The battery was full before it got bricked. I know its hard bricked. I just wanna know if there's any solution to unbricking it. I still have my warranty, but will sony consider it ??
Prinz` said:
The battery was full before it got bricked. I know its hard bricked. I just wanna know if there's any solution to unbricking it. I still have my warranty, but will sony consider it ??
Click to expand...
Click to collapse
No, you cant unbrick hard bricked phone that easy. You need to take it to the service centre. And the warranty depends on a lot of things. In my country, I would lost warranty even after rooting only the phone. So good luck.
Prinz` said:
The battery was full before it got bricked. I know its hard bricked. I just wanna know if there's any solution to unbricking it. I still have my warranty, but will sony consider it ??
Click to expand...
Click to collapse
Only Sony service centre can reserect your Xperia device...
Sent from my Xperia XA using XDA Labs
Hello,
SM-G925I,system 6.0.1 rooted. I tried to install TWRP through their app. Reboot into 'Recovery is not seandroid enforcing'. Tried to restart into download mode, failed,reboot straight back to logo. Tried to power off with holding power key, no respond. Drained battery until screen off. Logo shows as soon as power connected, stucked again. Tried to restart into recovery mode from logo screen, no respond. Anyone has any other choices? Or i'm done here?:crying:
PLEASE HELP ME!
This is basically what I'm experiencing, though I didn't do a single thing to my phone, and I can't for the life of me figure anything out about it other than that it's SM-G925F and that it's from Norway... Hard life for me ATM
kgsoul said:
Hello,
SM-G925I,system 6.0.1 rooted. I tried to install TWRP through their app. Reboot into 'Recovery is not seandroid enforcing'. Tried to restart into download mode, failed,reboot straight back to logo. Tried to power off with holding power key, no respond. Drained battery until screen off. Logo shows as soon as power connected, stucked again. Tried to restart into recovery mode from logo screen, no respond. Anyone has any other choices? Or i'm done here?:crying:
PLEASE HELP ME!
Click to expand...
Click to collapse
Hold power button for 30 seconds. Phone will go off.
Hold home + down + power for 20 seconds until in download mode. Flash stock firmware.
If you want root back flash cf auto root.
I use flashify to install TWRP.
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
TeamHydraRF said:
This is basically what I'm experiencing, though I didn't do a single thing to my phone, and I can't for the life of me figure anything out about it other than that it's SM-G925F and that it's from Norway... Hard life for me ATM
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s6-edge/help/bricked-samsung-s6-g925f-t3457433
Read this post. Try to flash the firmware i posted.
If it fails send me the odin log!
callumbr1 said:
Hold power button for 30 seconds. Phone will go off.
Hold home + down + power for 20 seconds until in download mode. Flash stock firmware.
If you want root back flash cf auto root.
I use flashify to install TWRP.
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
http://forum.xda-developers.com/galaxy-s6-edge/help/bricked-samsung-s6-g925f-t3457433
Read this post. Try to flash the firmware i posted.
If it fails send me the odin log!
Click to expand...
Click to collapse
Thank you so much for your help. I went through those buttons couple times with a stopwatch for accuracy. Although Screen didn't turn off during "power off". But made it into Download Mode. Reflashed TWRP in Odin. Problem solved.
kgsoul said:
Thank you so much for your help. I went through those buttons couple times with a stopwatch for accuracy. Although Screen didn't turn off during "power off". But made it into Download Mode. Reflashed TWRP in Odin. Problem solved.
Click to expand...
Click to collapse
Glad to hear mate :good:
Hi, just as the title says. I'm currently updating my Poco F1 to the latest firmware. Now the phone is stuck on the Pocophone by Xiaomi screen and it has been 1,5 hour since I start the update.
What should I do? my phone is not unlocked
k3th3k said:
Hi, just as the title says. I'm currently updating my Poco F1 to the latest firmware. Now the phone is stuck on the Pocophone by Xiaomi screen and it has been 1,5 hour since I start the update.
What should I do? my phone is not unlocked
Click to expand...
Click to collapse
Hold volume up and power till the phone reboots
If it's still stuck boot to recovery and factory reset
Sent from my ONEPLUS A6010 using Tapatalk
It works guys
clsA said:
Hold volume up and power till the phone reboots
If it's still stuck boot to recovery and factory reset
Sent from my ONEPLUS A6010 using Tapatalk
Click to expand...
Click to collapse
OMG , Thank you so much . I had the same issue. It works guys
clsA said:
Hold volume up and power till the phone reboots
If it's still stuck boot to recovery and factory reset
Sent from my ONEPLUS A6010 using Tapatalk
Click to expand...
Click to collapse
The same happened to me, thanks clsA! :good:
how? with the first option or by factory reset? please help. i am stucked after the update. i can't afford to loose my data. please help.
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
clsA said:
Hold volume up and power till the phone reboots
If it's still stuck boot to recovery and factory reset
Sent from my ONEPLUS A6010 using Tapatalk
Click to expand...
Click to collapse
sir, i updated my poco f1 today (normal update from settings) but now it is not getting started, stuck on boot scree. for once it came on recovery screen where i selected reboot option, after that reading your reply i tried pressing volume up and power key but nothing happened it is still on the boot screen. please help. and i can't factory reset it. i really need my data. please please help
vineetasopa said:
how? with the first option or by factory reset? please help. i am stucked after the update. i can't afford to loose my data. please help.
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
sir, i updated my poco f1 today (normal update from settings) but now it is not getting started, stuck on boot scree. for once it came on recovery screen where i selected reboot option, after that reading your reply i tried pressing volume up and power key but nothing happened it is still on the boot screen. please help. and i can't factory reset it. i really need my data. please please help
Click to expand...
Click to collapse
how long are you holding the power and vol up ? till the phone shuts off ?
the problem is the Encryption key gets corrupted, if this has happened your data is already gone, factory reset is the only fix for a lost corrupt encryption key
clsA said:
how long are you holding the power and vol up ? till the phone shuts off ?
the problem is the Encryption key gets corrupted, if this has happened your data is already gone, factory reset is the only fix for a lost corrupt encryption key
Click to expand...
Click to collapse
sir, please don't say that. that is very crucial. but why this happened when this company sent this update? please help. can data recovery company help in this issue?? i beg you , it is really important.
vineetasopa said:
sir, please don't say that. that is very crucial. but why this happened when this company sent this update? please help. can data recovery company help in this issue?? i beg you , it is really important.
Click to expand...
Click to collapse
You may get lucky and the update went fine you just need to reboot the phone.
But if it never boots after numerous attempts your only option is a full data wipe to force a new encryption key.
Someone else may know another way, but I don't