I need help to restore my phone to work
Telephone Sony S5 ultra E5533
We stopped at a certain stage when updated via TOOL FLASH program and the result was that he will not work
When connected to a computer writes on FLASH TOOL program it is connected to the correct USB mode
I tried very much to do I entered to put FLASH MODE but without the benefit of
Thank you and please help
Related
Hi All
I installed a custom ROM but it was getting stuck in boot screen ,so i did a auto format flash which deleted all the data in the phone flash including bootloader using SP flash tool v3.1312.0.139 .
As I disconnected the phone from PC it got hard-bricked. Even if i connect to PC, SP flash tool is not able to recognize the gionee p2 so I cant do any thing .
can't switch on the phone and not getting recognized in PC
Is there a way to fix it or to send the rom data to the phone flash ?
type[http]://i61.tinypic.com/jr40uh.jpg
type[http]://i58.tinypic.com/2ahedsm.jpg
Note: Before the format, the phone was working fine and was detected in PC after the flash format nothing works not even
getting detected in PC.
Regards
Arhdna
arhdna said:
Hi All
I installed a custom ROM but it was getting stuck in boot screen ,so i did a auto format flash which deleted all the data in the phone flash including bootloader using SP flash tool v3.1312.0.139 .
As I disconnected the phone from PC it got hard-bricked. Even if i connect to PC, SP flash tool is not able to recognize the gionee p2 so I cant do any thing .
can't switch on the phone and not getting recognized in PC
Is there a way to fix it or to send the rom data to the phone flash ?
type[http]://i61.tinypic.com/jr40uh.jpg
type[http]://i58.tinypic.com/2ahedsm.jpg
Note: Before the format, the phone was working fine and was detected in PC after the flash format nothing works not even
getting detected in PC.
Regards
Arhdna
Click to expand...
Click to collapse
of course it'll go dead. you just removed the OS without replacing with anything. you'll either need to get the stock backup or backup a working phone using MTK droid tools then re-flash the stock backup
Hey guys,
So I wanted to try out the newest CM12 ROM with A5.0 but seems like it didnt exactly happen how I wanted it. Rooting the device and then installing the XZDualRecovery without a problem. Then downloaded the ROM and gapps.
I have SGP311 (pollux_windy) so I downloaded that version of the CM12 at first. It said that my device is pollux, which I ofc was dumb enough to just skip and download the pollux ver and then install that one. So I installed the pollux ver instead of pollux_windy and when I hit restart device I didnt see it boot again.
So I wanted to connect it to my PC, PC didnt recognize it ofc. Only way my PC regonizes my tab is by fastboot mode. I had to install a driver for that. And even then only the Sony Mobile Flasher by Androxyde recognised it. I run into bootloop various times before with my tab and Emma always fixed it but thats unfortunately not the case here as Emma doesnt recognise it either :/
So now here's the problem, I can only do fastboot mode (not flashmode) and the only program able to do sth with my device is this Sony Mobile Flasher. I downloaded a official FW there and wanted to install it but it required me to go into the flashmode which I can't.
Is there sth I can do? The only thing working is the LED and fastboot mode.
Is there a way to put the device into flashmode via PC, that would solve all issues or maybe a trick to go into flashmode? As there was some thread about it but the thing they did didnt work for me :/
Please help
Thanks in advance
Nevermind, I just forgot how to use Emma....
For anyone to whom this happens:
Computer: Open Emma from the Start menu of your computer.
Connect a USB cable to your computer.
Phone: Turn off your tab.
Connect your tab to the USB cable while holding the VOLUME DOWN.
Computer: Select the software you want to flash in the Service list. The tool automatically detects the tab and lists available software versions, which are called Services in this flash tool.
Click on Apply Service. The tab will now be flashed.
Phone: When you have flashed your device, you can disconnect your phone from the computer. The first time you start your device after you have flashed it, the boot-up might take a little longer than normal.
Good evening everybody,
I have a big problem somehow my Tablet z SGP-321 got a complete wipe of the internal storage (don't know how, if through stupididy or technical mishap). Is there anyway that I can get it back to functioning? I can get a red LED on the Tablet and every now and then with luck I can get it to boot showing the Sony image but then it shuts off again. I can't even get the pc companion to recognize the tablet furthermore the repair option of the application. can somebody help me?
Thanks in advance
Thomas
ok I have downloaded the flash tool and android 4.4.4 and I tried to flash but I can not get past the window where it asks to connect the device to the computer using the vol. down button (apparently it is not detecting the device) i have also tried the blu funtion which also is not functioning.
Trniedner said:
ok I have downloaded the flash tool and android 4.4.4 and I tried to flash but I can not get past the window where it asks to connect the device to the computer using the vol. down button (apparently it is not detecting the device) i have also tried the blu funtion which also is not functioning.
Click to expand...
Click to collapse
it seems that drivers are not installed needed for flashmode/fastboot.
hello everybody
my phone (Xperia C4 Dual E5333 - locked bootloader) is rooted using kingroot
I try pintasking app which supports rooted phones by installing its helper
I uninstall this app and when I uninstall its helper the phone send me error messages related to system apps
so I restarted my phone but the phone is bootlooping !!!!
I used flashtool to flash latest firmware
I turned my phone off then connect it to USB while pressing (volume-) but the computer didn't detect anything connected !
I try to connect it with fastboot mode (volume+) but also the computer didn't detect anything connected !
the last message in flashtool is (Device disconnected)
please help me :crying:
I tried all usb ports and changed usb cable , also the computer but nothing changed
it doesn't detect unknown device which is required its driver
nothing happen at all when I connect my phone to computer via usb
engnajjar said:
hello everybody
my phone (Xperia C4 Dual E5333) is rooted using kingroot (locked bootloader)
I try pintasking app which supports rooted phones by installing its helper
I uninstall this app and when I uninstall its helper the phone send me error messages related to system apps
so I restarted my phone but the phone is bootlooping !!!!
I used flashtool to flash latest firmware
I turned my phone off then connect it to USB while pressing (volume-) but the computer didn't detect anything connected !
I try to connect it with fastboot mode (volume+) but also the computer didn't detect anything connected !
the last message in flashtool is (Device disconnected)
please help me :crying:
Click to expand...
Click to collapse
DO NOT use flashtool with c4+c5 mediatek powered Xperia devices it hard bricks them turning them into nothing more than expensive permanent paperweights. It does clearly state this on the flashtool download page. No idea why it's only these mediatek powered Xperia devices as it works great with my xa
Sent from my Xperia XA using XDA Labs
aidy.lucas said:
DO NOT use flashtool with c4+c5 mediatek powered Xperia devices it hard bricks them turning them into nothing more than expensive permanent paperweights. It does clearly state this on the flashtool download page. No idea why it's only these mediatek powered Xperia devices as it works great with my xa
Sent from my Xperia XA using XDA Labs
Click to expand...
Click to collapse
Ok , anyway if I mustn't use flashtool but repaire by sony companion, it has to be detected when I connect via usb , isn't it ??
how can I fix this big problem please ??
Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if there´s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.