I tried to install RemixOS to a USB stick, but got the same blank screen as I previously had gotten when trying to install Linux Mint on my system with an NVIDIA GTX 970 video card. Turns out some newer NVIDIA graphics cards do not have video support until the drivers are actually installed, unlike my previous AMD card.
What I had to do to install Mint was to use recovery mode on the Live CD, then use the "NOMODESET" command for basic video graphics to be able to see the install screens.
Even using "NOMODESET" for the USB install wouldn't help very much for RemixOS since there's no way to install the official NVIDIA graphics drivers after the OS boots like you can in Linux (that I know of).
Is there any workaround? For now, I have to use RemixOS through VirtualBox on my main PC to test and play around with the OS because of this.
Related
First the issues. I was not able to figure out how to set it up to where I can install Remix OS on my chromebook's SSD instead of having to use a USB stick. I also wasn't able to figure out why running the ISO installer tool that comes with the most recent download (yesterday) didn't work. I used it on a 32GB PNY USB flash drive, but after going into the legacy boot menu on my Chromebook, and selecting my USB stick to boot from, it was not able to find an operating system. Instead, I used Linux Live USB Creator (LiLi). I manually selected the Remix OS ISO that came with the download, and installed it to my USB stick. My chromebook recognized it immediately as a bootable OS. It even gave me the options for guest mode, and write mode. I chose write mode. The only downside to this is not being able to choose how large the partitions should be. Either way, it installed successfully.
The awesome parts. It recognized and works uniformly with my chromebook's touch screen and touch pad. Zero issues. It even recognizes some touch-pad short cuts like two-finger scrolling, etc. It doesn't recognize some of my keys on the keyboard itself, like volume up/down, and brightness up/down, but this is easily managed at the task bar. I also tested Star Wars: Galaxy of Heroes to see if games would be sluggish running on a USB stick. I don't know about all games, but that one in particular ran as though it was on my Nexus 7. Super smoothly, with no issues. Aside from it being a bit sluggish running apps for the first time, (it frequently asked if I wanted to wait, or to force close Facebook and others - hitting wait works), I am very impressed with the experience. It's everything I could hope for in a beta android desktop OS! :good: :good:
PS, I'm actually running it right now as I type this.
I got it to install on my Acer R14 with a triple boot, windows 10, ubuntu, remix os. If you use universal usb installer and install directly to a NTFS partition on your hard drive you can use RMXtools to make the data .img whatever size you want. I did it for 50GB and have installed alot of apps and i still have 48GB left. I really like this OS.
Well I tried ubuntu on my chromebook for a while, but wasn't feeling it. I would have to put it on in order to install Remix OS to a hard drive no?
No just use universal usb installer and select non-linux installation and install directly to your ntfs drive. The expand the data file with RMXTools to whatever size you want.
rsktkr1 said:
No just use universal usb installer and select non-linux installation and install directly to your ntfs drive. The expand the data file with RMXTools to whatever size you want.
Click to expand...
Click to collapse
How do I run Universal USB installer from Chrome OS then?
ryfly65 said:
How do I run Universal USB installer from Chrome OS then?
Click to expand...
Click to collapse
Make your usb bootable with Rufus.
Been using it from USB for weeks now I'll try the Linux USB tool, would be amazing to get this running on the hdd. Does you're touchpad work??
Edit: just read it does work but hasn't for me, been needing my wireless mouse
Sent from my Nexus 9 using Tapatalk
Is it possible to boot a linux live usb and install remix os on the ssd with Gnome disks?
There has got to be some variation in components with revisions of the C720P, because no OS I have tried to boot on mine has supported the mouse other than Gallium. If I install the GalliumOS kernel on Debian it works fine, but no idea how I would do that with Android. Your touchpad really just worked huh? Not for me, not in the version of RemixOS I downloaded from the Jide site last night, nor in the hacked edition or whatever it's called here on XDA.
My laptop Asus X8AIJ very old since 2005.....
settup on HDD,,,non USB
Win10 64bit + Remix os 2.0.0.205 with rooted ,,,,very good...but i can not settup display for as well
Hello!
I have a tablet with UEFI 32bits (it's a Emdoor EM-i8080 with Intel® Atom™ Processor Z3735E) and I'm trying to install just RemixOS at the HDD, without Windows side by side.
The thing is, I tried many tutorials that I found here at XDA and nothing seems to work with my tablet. I understand that the process is the same as install the RemixOS in a VM, right?
I managed to format the HDD with GParted, install RemixOS with "INSTALL=1" but, after the install, it just doesn't boot. Then I tried another tutorial using a Linux USB Live, but the linux usb doesn't boot (tried with Ubuntu and Debian).
Any ideas of what I'm doing wrong?
Thanks! =D
Hi, I know this an old thread but if you have not fixed it yet then this might help. I got a similair tablet and got Linuxium 16.04 and 16.10 to boot on it, by using kernel parameter
nomodeset
then at least you can get to the desktop. I have only tried the 64bit and Gnome, Unity, Xubuntu, Kubuntu(don't use this one as it uses too much RAM).
https://linuxiumcomau.blogspot.com/2016/10/running-ubuntu-on-intel-bay-trail-and.html?showcomment=1477057433854#c5416952429820429838
I can't help you with the android as I have not yet got that to boot to desktop.
Hope this helps
JBJ
I have here a P3-1Ghz with 512 megabytes of RAM on an Asus CUSI-M (SiS630M) motherboard in a compact case. I thought I'd try running RemixOS on it, under the rationale that Android should be friendlier to old PC hardware than any other modern system because plenty of ultramobile devices it runs on have about the same power as old PC hardware.
The CD-ROM drive is a slim unit that's unfortunately quite dead, and I don't have any of my old IDE optical drives handy; plus the computer only has USB1.1 (from which it can't boot without Plop Bootmanager and even that's sketchy) and I don't have any USB2 PCI cards, so it requires some creative ways to get a live system running. My idea is to either put the OS on the drive from my main computer and then transfer it across, or get the system on another drive, plug it in the secondary IDE channel, boot it and install to the primary drive from there.
I plugged the drive into my win10 box with a IDE-to-USB2 converter and ran the Windows installer program; it did its thing, but when I transfer the drive to the PIII it doesn't boot - it just stays there at the BIOS screen forever, as if there was no bootloader on the hard disk (I understand the installer, which seems derived from UNetBootin, should have put one there). This happens both with FAT32 and NTFS.
So I tried dd'ing the image to the hard drive directly in Linux. That at least got me to the bootloader, but when I try to boot (in guest mode) it complains about Intel Powerclamp not working and some other process being incompatible with the CPU. Then it reboots.
I then tried using Rufus to write the image to the hard disk, and that caused a cleaner attempt - no complaints and it goes straight to "looking for Android-x86 on /dev/sda1, found"... and then reboots.
Notably my idea seems to work otherwise - I can boot any Linux live by Rufus-ing it to one of the two drives, and if I put the live on the second drive I can then boot it, run the installer and install it on the first; by way of an experiment I installed Mint like this and it booted to a desktop just fine (if slowly).
I'm wondering if I'm doing something wrong with the image files, or if I'm just trying to install it on an excessively ancient and unsupported computer - which would be too bad, really, as it seems an ideal solution to revive slow hardware.
Edit: another attempt. I used my main box to create a RemixOS USB drive, then rebooted the main box to verify that it works, and sure enough RemixOS booted fine from the thumbdrive. I then used Linux to dd the thumbdrive directly on the IDE hard drive and plugged that in the P3. This works - it boots to the bootloader, acts as if it wants to boot (even formats the data partition if I select resident mode), then - again - resets.
Why is the damn thing resetting on boot and how do I stop it? Argh!
Fallingwater said:
I have here a P3-1Ghz with 512 megabytes of RAM on an Asus CUSI-M (SiS630M) motherboard in a compact case. I thought I'd try running RemixOS on it, under the rationale that Android should be friendlier to old PC hardware than any other modern system because plenty of ultramobile devices it runs on *have* about the same power of old PC hardware.
The CD-ROM drive is a slim unit that's unfortunately quite dead, and I don't have any of my old IDE optical drives handy; plus the computer only has USB1.1 (from which it can't boot without Plop Bootmanager and even that's sketchy) and I don't have any USB2 PCI cards, so it requires some creative ways to get a live system running. My idea is to either put the OS on the drive from my main computer and then transfer it across, or get the system on another drive, plug it in the secondary IDE channel, boot it and install to the primary drive from there.
I plugged the drive into my win10 box with a IDE-to-USB2 converter and ran the Windows installer program; it did its thing, but when I transfer the drive to the PIII it doesn't boot - it just stays there at the BIOS screen forever, as if there was no bootloader on the hard disk (I understand the installer, which seems derived from UNetBootin, should have put one there). This happens both with FAT32 and NTFS.
So I tried dd'ing the image to the hard drive directly in Linux. That at least got me to the bootloader, but when I try to boot (in guest mode) it complains about Intel Powerclamp not working and some other process being incompatible with the CPU. Then it reboots.
I then tried using Rufus to write the image to the hard disk, and that caused a cleaner attempt - no complaints and it goes straight to "looking for Android-x86 on /dev/sda1, found"... and then reboots.
Notably my idea seems to work otherwise - I can boot any Linux live by Rufus-ing it to one of the two drives, and if I put the live on the second drive I can then boot it, run the installer and install it on the first; by way of an experiment I installed Mint like this and it booted to a desktop just fine (if slowly).
I'm wondering if I'm doing something wrong with the image files, or if I'm just trying to install it on an excessively ancient and unsupported computer - which would be too bad, really, as it seems an ideal solution to revive slow hardware.
Edit: another attempt. I used my main box to create a RemixOS USB drive, then rebooted the main box to verify that it works, and sure enough RemixOS booted fine from the thumbdrive. I then used Linux to dd the thumbdrive directly on the IDE hard drive and plugged that in the P3. This works - it boots to the bootloader, acts as if it wants to boot (even formats the data partition if I select resident mode), then - again - resets.
Why is the damn thing resetting on boot and how do I stop it? Argh!
Click to expand...
Click to collapse
Try flashing it to another hard drive, insert both drives into the computer, and and at the grub menu press alt, and add "install=1 debug=" (without the quotes of course, and debug should have no character whatsoever afer the equals.
After installing from the second hard drive to the first, turn off the computer, remove the second hard drive, and boot up the conputer.
I hope this works for you.
Good question... I have an pentium 4 3.0 ghz 64 bit cpu, 4 gig mem and an sata ssd, that runs on Linux mint. Can i install Remix Android 6 without Windows or is Windows recommended if i will to install Remix Android 6
Flemischguy said:
Good question... I have an pentium 4 3.0 ghz 64 bit cpu, 4 gig mem and an sata ssd, that runs on Linux mint. Can i install Remix Android 6 without Windows or is Windows recommended if i will to install Remix Android 6
Click to expand...
Click to collapse
No need for windows, however it makes things easier for flashing it on the flash drive.
My recommendation, though, is to use the flash drive as an installer: according to what I had written above, install Remix OS to a hard drive from the flash drive.
I did what you suggested. The system is now installed on the second hard drive, but the computer still resets when attempting to boot. However, by selecting debug boot in grub it tells me a bit more info about the crash - which it didn't when I just did "debug=" in the live, for whatever reason.
Does this tell you anything?
Fallingwater said:
I did what you suggested. The system is now installed on the second hard drive, but the computer still resets when attempting to boot. However, by selecting debug boot in grub it tells me a bit more info about the crash - which it didn't when I just did "debug=" in the live, for whatever reason.
Does this tell you anything?
Click to expand...
Click to collapse
Not much, unfortunately.
However, perhaps a BIOS update will help.
It's already updated to the newest revision.
In case others come across this problem: apparently it's not caused by the CPU, but by an unsupported video adapter. This computer has a disgusting old integrated SiS something-or-other video chipset, so that doesn't surprise me. I might try again if I ever find a PCI video adapter that'll fit the case.
Fallingwater said:
In case others come across this problem: apparently it's not caused by the CPU, but by an unsupported video adapter. This computer has a disgusting old integrated SiS something-or-other video chipset, so that doesn't surprise me. I might try again if I ever find a PCI video adapter that'll fit the case.
Click to expand...
Click to collapse
Alright, I hope it'll work then.
Here are my system basics:
ASUS M32CD
Intel Core i7-6700
NVIDIA GeForce GT730
Installation to hard drive was successful, and I can get to the grub menu. I get such at the Remix OS boot logo, and have let it go for an hour before a hard shutdown. I have tried setting it to use Intel graphics only, with same result and I have added androidboot.swrast=1 in grub.
I'm using the latest version on the official site. Guest mode from USB will boot. I known this system can run Linux, as I have Korora 24 on a separate hard drive (not hooked to the mother board at the same time).
they should really remake the installation process, i am only able to run remix os, on on of my computer. all running windows 10.
hellokittyr said:
they should really remake the installation process, i am only able to run remix os, on on of my computer. all running windows 10.
Click to expand...
Click to collapse
I refuse to run Windows. So if it takes installing Windows to run it, I guess I won't run it.
I couldn't tell from the cryptic instructions whether I would end up with a conventional dual boot arrangement if I install remix on my windows 7 hp pro x2 612 touchscreen laptop. I don't want to lose the windows 7. I downloaded what I think is the most recent version Remix_OS_for_PC_Android_M_64bit_B2016101201. Also can I burn the iso to a disc (not usb drive) and use the included windows installer. Will remix boot from the disc so I can check it out on my pc before installing it?
Does remix allow installing conventional linux applications such as full libreoffice or is it limited to google play offerings. Is there a guide anywhere to side loading whatever is needed to get the google play store working. Appreciate any help with all these questions. Thanks so much
@spb37
Installing using the official installer will not do any harm to the Windows 7 installation. If you chose to install on the same partition as Windows, it will be placed in a separate folder and a boot menuentry will be added.
So, yes, you end up with a conventional dual boot arrangement
Remix OS .iso was not designed to work on disc mediums so I do not recommend to try and boot from a disc.
Instead, better use a USB storage Device to test Remix out.
Remix OS is a fork of Android-x86 project (coming from AOSP) so it doesn't have a Linux GUI packages installer. You won't be able to install LibreOffice on it.
Play Store comes pre-installed as long as you select the respective option during first boot.
It depend
i've create one partition and install with INSTALL=1
taking grub not grub 2 saying add one instruction for choose os remix or Windows 7 at the starting up (it had work perfectly with the pc of my friend but not with mine .