Related
I have scoured the internet the last 3 days searching for a replacement stock ROM or any compatible custom ROM for my Aigo-Pad M801. I'm American but I'm living in China for the next year or so. I don't speak or read Chinese and I've tried going through the Chinese forums for the firmware but couldn't really decipher anything, even with Google translate. And especially not for my tablet.
Specifications Link
I rooted with z4 root and it appeared to work. I installed gapps but couldnt get my market to work out by changing the fingerprint so i wiped cache and media partition to get a clean start again. I DO NOT have clockworkmod. I was not able to get the free version through the chinese market and the only versions i could find from download sites were the ripped off paid version, which i didnt think would work.
Currently when i turn on the tablet it shows the initial bootscreen and never loads the boot animation or any kind of interface. I can access the android stock recovery interface (3e). I read the tablet was for the most part a rebranding of the Ainol Novo so I downloaded a ainol ROM from here . I renamed this update.zip and put it on the root of my SD. When i go to update from the sd card i get this error:
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
I researched this error but everything I have found assumes i have clockworkmod recovery, which i dont. I have tried, tried, and tried again the option to factory reset but it doesnt seem to solve this stuck of bootscreen problem. The easiest solution seems to be to bypass signature checks or to flash my drive, but I dont know how to mount the internal memory or the sd card to my computer without access to the tablet. I can put things from my computer directly onto the sd card and then insert this into the tablet.
If ANYONE has ANY advice other than to give up please post.
flash a new rom or the stock one
obviously this was my first choice. but seeing as there are no obviously compatible roms half the point of posting this was to see if anyone out there had the stock chinese rom that came with the tablet or a custom rom compatable with my aigo model, because none of the 8 i have looked at in depth have a custom rom version for aigo branded products.
¿Did you try Gadmei T820 ROMs?
Aigo M801 and Gadmei T820 seems to be the same.
AIGO-Pad M801 = GADMEI Pad T820 = NVSBL P4D SIRIUS
AIGO-Pad M801 = GADMEI Pad T820 = NVSBL P4D SIRIUS
Here are a compatible rom:
h t t p:/ / w w w.nvsbl.es/foros/viewtopic.php?f=39&t=1178
test and comments:
Greetings.
Hi,
i just got that same tablet, and i'm a complete newbie to Android.
But as far as i've tried it and read about Android... i need to find a better ROM urgently!
Lodell, did you make it?
Thanks for your help!
Bastos
I just got a dopo 7" tablet from a relative and for the life of me cannot get it to root. I have been at it since 3-4pm (its 11:10 now) and no matter what
apk or .bat rootkit, or windows root exe i have tried from old guides and some new ("can root ANY android device 2014!!!") to youtube videos.
Yes I have the correct driver thanks to vroot downloading it.
i have unknown sources checked
debugging checked
tablet never sleeps/screen never shuts off
have it plugged into laptop via the cable the tablet came with usb to micro
root master apk failed
suggested root-rk29 tab rootkit each step it tried it could not find any of the necessary files needed on my tablet
(even after 3 restarts and 3 different methods)
vroot will try to restore data like the programs steps shows but as soon as it says restore started it immediately says restore ended and it gives an X in the circle and wants me to retry (tried 4 times)
tried doomlordz v4 rootkit and same as other rootkit it says the files arnt found and does the alternative methods and SAYS its completed but root checker still says its not
tried key root master mentions something about a cloud program but never roots
superoneclick becomes unresponsive for 20mins and does nothing so i have to end task (some says it freezes their phone/tablet) but my tablet acts like nothing is happening
I have tried googling multiple times only to find results related to 9" version (i assume newer)
So if ANYone knows a 95% guaranteed program/guide or something I would very much like to see it cause I have about reached my limit of patience on this thing
Please keep the guide simple as I have 0 knowledge on rooting other than reading up why I would want it or the common steps which did not work obviously...
What version of android does it have, 4.1.1 or 4.2.2? I have the same tablet and have been trying for about 6 weeks to root it. Mine came with 4.2.2. I have read that the 4.1.1 version has been successfully rooted. First off, you said that root master suggested root-rk29 tab but it wouldn't work. The reason is that rk29 is for a rockchip SoC and the em63 has an amlogic 8726-mx SoC. I have tried just about every root method I can find, both manual, oneclick, apk, and Windows scripts with no luck. I am hesitant to try modifying some of the methods because if something goes wrong chances of recovering aren't good. As far as I know, there's no way to create a backup of the firmware without root. I have talked with tech support at DoPo and to get a copy of the firmware I have to send in a microsd and they will put a copy on it. Of course after rooting the warranty will be void and I will no longer be able to receive support, but I'm not too concerned with that. Anyway, for now it looks like the best shot I have at rooting this thing is to modify the firmware and flash it. When I get a copy of the Rom I'd be happy to give you a copy. If you find a way in the meantime to root it please let me know.
If anyone else has any ideas or if someone with the 4.1.1 firmware could provide a copy I would greatly appreciate it. Thanks.
nerd1026 said:
What version of android does it have, 4.1.1 or 4.2.2? I have the same tablet and have been trying for about 6 weeks to root it. Mine came with 4.2.2. I have read that the 4.1.1 version has been successfully rooted. First off, you said that root master suggested root-rk29 tab but it wouldn't work. The reason is that rk29 is for a rockchip SoC and the em63 has an amlogic 8726-mx SoC. I have tried just about every root method I can find, both manual, oneclick, apk, and Windows scripts with no luck. I am hesitant to try modifying some of the methods because if something goes wrong chances of recovering aren't good. As far as I know, there's no way to create a backup of the firmware without root. I have talked with tech support at DoPo and to get a copy of the firmware I have to send in a microsd and they will put a copy on it. Of course after rooting the warranty will be void and I will no longer be able to receive support, but I'm not too concerned with that. Anyway, for now it looks like the best shot I have at rooting this thing is to modify the firmware and flash it. When I get a copy of the Rom I'd be happy to give you a copy. If you find a way in the meantime to root it please let me know.
If anyone else has any ideas or if someone with the 4.1.1 firmware could provide a copy I would greatly appreciate it. Thanks.
Click to expand...
Click to collapse
yup 4.2.2 so in the end till i see a working method im giving this 1 to my younger sibling and getting the nexus 7... hopefully itll be an easier and less stressful time. hope you get it to work.
I figured it was the updated version. They seem to have patched the updated version so most root methods won't work. It's good from a security standpoint, but I wish they would provide a way to root if that's what you want to do. It's a tablet, not a phone so locking it into one provider isn't an issue. Anyway, I'm sure you'll be happy with the nexus 7. That's what I have and I'm very happy with it. There's tons of support and custom roms. Rooting it is super easy too. I used wug's toolkit and I had it rooted, did a nandroid backup and installed twrp recovery in about 30 min. If you do happen to root the em63, or get a copy of the 4.1.1 Rom, please let me know. If anyone else has any ideas, or anything, please post. Thanks.
Hope this helps! I got it!
I hope this helps the EM63 users!
http://forum.xda-developers.com/gen...uble-power-em63-7-4-2-2-t2811412/post54045765
I was able to root my Gigabyte em63 with Root Genius with no problems.
I'm trying to find if anyone has a rom or if someone has gotten twrp for this model. My internal memory became unmounted or something because my total space is 0bytes making it impossible to do anything. Boots up in factory everytime and I can't install any apps.
Anyone have any luck?
Stock Firmware for Emdoor EM63
donbwhite said:
I was able to root my Gigabyte em63 with Root Genius with no problems.
I'm trying to find if anyone has a rom or if someone has gotten twrp for this model. My internal memory became unmounted or something because my total space is 0bytes making it impossible to do anything. Boots up in factory everytime and I can't install any apps.
Anyone have any luck?
Click to expand...
Click to collapse
Envizen has the stock firmware for the EM63 posted on there site. I don't know if it will work on the Gigabyte branded tablet but it does work for the Apex branded one without a problem. Just Google search for the Envision website and look for the EM63.
Hello everyone. I wondered if anyone could give me some help with updating my Ascend Mate 2 model MT2-L05 to 4.4 KitKat?
I received the phone on Thursday and it came with 4.2.2 installed.
It shows build number as : MT2-L05V100R001C17B912
From my searching, this appears to be the China Unicom version. I have been to updates on the phone and searched OTA and i'm told that the device is up to date. I have no option on the phone to update from SD card.
I have downloaded the 4.4 update ROM from the official Huawei site for the MT2-L05 and have tried flashing it with the 3 Button bootup method and I receive this message when the autoflasher starts :
checking Module MD5RSA...OK
checking Module CRC...OK
checking Module...CURVER...OK
checking Module VERLIST...
sd_update_func.....fail
then above this recovery gives me 4 options :
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
I then choose reboot system and the phone starts up no problem.
I have tried putting the dload folder on a 16gb Lexar sd card, a brand new class 10 Sandisk ultra sd card, and i have also tried putting the dload folder on the phone's internal storage and i get the same error message every time i try to update.
Any help would be greatly appreciated. Thank you!
4L0M said:
Hello everyone. I wondered if anyone could give me some help with updating my Ascend Mate 2 model MT2-L05 to 4.4 KitKat?
I received the phone on Thursday and it came with 4.2.2 installed.
It shows build number as : MT2-L05V100R001C17B912
From my searching, this appears to be the China Unicom version. I have been to updates on the phone and searched OTA and i'm told that the device is up to date. I have no option on the phone to update from SD card.
I have downloaded the 4.4 update ROM from the official Huawei site for the MT2-L05 and have tried flashing it with the 3 Button bootup method and I receive this message when the autoflasher starts :
checking Module MD5RSA...OK
checking Module CRC...OK
checking Module...CURVER...OK
checking Module VERLIST...
sd_update_func.....fail
then above this recovery gives me 4 options :
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
I then choose reboot system and the phone starts up no problem.
I have tried putting the dload folder on a 16gb Lexar sd card, a brand new class 10 Sandisk ultra sd card, and i have also tried putting the dload folder on the phone's internal storage and i get the same error message every time i try to update.
Any help would be greatly appreciated. Thank you!
Click to expand...
Click to collapse
KK is not available for the phone in the US... yet. Apparently, it is coming but for now, you are stuck with JB.
Thank you for the reply zzEvilGeniuszz, but I am in the UK, and I own the Hisilicon powered Ascend Mate 2 from China.
I do not own the US model, which i believe off the top of my head is Model no : MT2-L03.
I have the correct 4.4 rom downloaded from the official Huawei chinese site and i have also tried the needrom version ( which i think is exactly the same as the official one ), I just cannot get it to flash correctly.
Best Regards !
4L0M said:
Thank you for the reply zzEvilGeniuszz, but I am in the UK, and I own the Hisilicon powered Ascend Mate 2 from China.
I do not own the US model, which i believe off the top of my head is Model no : MT2-L03.
I have the correct 4.4 rom downloaded from the official Huawei chinese site and i have also tried the needrom version ( which i think is exactly the same as the official one ), I just cannot get it to flash correctly.
Best Regards !
Click to expand...
Click to collapse
The only problem is that most of us have the US variant. I personally can't give any advice as to what to do and I'm pretty sure most of the active members on this mate 2 forum will be the same. :/
I am curious, if @4L0M uploaded the KK update to one of us, couldn't altering the build.prop to the same specifications as the US version make a difference? Meaning, if altering the build.prop to US version, then installing, would that work???
I don't think that would work.
There are currently 5 different official 4.4 roms for download from the official Huawei Chinese support site :
MT2_C00 : China Telecom
MT2-L05 : China Unicom ( My Ascend Mate 2 i think, although i see a lot of references to C00 too, so I am a bit confused.)
MT2-L05 : China Unicom Channel
MT2-L02 : Mobile Channels
MT2-L01 : China Mobile
I just extracted my build prop file and it says I am running version : MT2-L05V00R001C17B107SP1.
I have found out there are updated versions B109, B110, B111 and B115 of 4.2.2, so i will see if I can hunt them down and flash them in sequence, then try to flash 4.4
I don't know enough about reading my build prop to work out if it's any good to you, but i can upload it somewhere if you would like to have a look, bearing in mind, at the moment it's only 4.2.2
Ok, so I found all 4 update files and downloaded them. They are about 900 mb each.
I put the first update B109SP5 on my memory card, did the 3 button fastflash startup, and IT WORKED ! ! ! It flashed no problem, then rebooted.
Update Successful. The mate 2 had been on for about 2 mins, then a notification came up telling me that an update was available for the device.
Update was called B110.
I downloaded this ( was about 45mb, it rebooted. SUCCESS !
I then went to settings, Updates, and I now had more options in the menu !
I chose Update online, it downloaded and flashed another small update called B111.
Reboot Success !
Yet another online update , ownloaded, Flashed success This Update was B112.
I then went to online update again, and it said B408 update is available. This one is 4.4 KiKat !
Before i downloaded the 4.4 update, I installed Play Store from .apk i downloaded using the stock browser as none of these updates include the Play Store. I then downloaded Root Checker, as i had rooted the Mate 2 last night. I had lost root annoyingly, as I was going to try to use OTA rootkeeper to try and keep my root, before flashing 4.4
I tried downloading KingRoot apk from playstore, as this is the root manager I had installed yesterday, but I couldn't root with KingRoot.
4.4 is downloading as we speak...............or as I type, to be precise.
Hello again.
I successfully flashed my MT2-L05 to 4.4.2 KitKat at the weekend. Initial impressions are very good.
It seems to have freed up about 400mb of more RAM compared to 4.2.2
4.2.2 free ram at boot up 800mb
4.4.2 free ram at boot up 1245mb
I now have emotion UI 2.3, but haven't used it as i always use Nova Launcher Prime. The phone is miles snappier on 4.4.2, it's a noticeable improvement in speed around the UI and general app opening and viewing of websites etc. The pulldown toggle menu now has a nice transparency to it.
The lockscreen now has a pullup menu at the bottom in the dead centre for a pullup instant access menu to Calendar, Calculator, Torch and mirror apps. There is now a camera icon on the bottom right to instantly bring up a camera from your lockscreen.
4.4.2 on Ascend Mate 2 doesn't appear to support Album artwork on Lockscreen like my Note 2 4.4.2 did.
I also consistently have 1000 less points on Antutu benchmark ( 27,000 ) on 4.4.2 compared to 4.2.2 ( 28,324 )
I also have one more question if anyone can help me. My IMIE number on my box is the same as the one listed in status on the phone, yet the serial number on my box is now different from the serial number my phone shows in phone status. I don't know if this was always the case, or it changed when I flashed 4.4.2
Which one do you think i should Email to Huawei to see if they will send me an unlock code for bootloader?
I have tried for the hell of it Towelroot, Framaroot, Vroot, Kingo, Kingroot, SRS root, and Root Genius to try and root 4.4.2 to now avail. Root Genius told me it was successful, but no root on reboot.....which sucks.
4L0M said:
Hello again.
I successfully flashed my MT2-L05 to 4.4.2 KitKat at the weekend. Initial impressions are very good.
It seems to have freed up about 400mb of more RAM compared to 4.2.2
4.2.2 free ram at boot up 800mb
4.4.2 free ram at boot up 1245mb
I now have emotion UI 2.3, but haven't used it as i always use Nova Launcher Prime. The phone is miles snappier on 4.4.2, it's a noticeable improvement in speed around the UI and general app opening and viewing of websites etc. The pulldown toggle menu now has a nice transparency to it.
The lockscreen now has a pullup menu at the bottom in the dead centre for a pullup instant access menu to Calendar, Calculator, Torch and mirror apps. There is now a camera icon on the bottom right to instantly bring up a camera from your lockscreen.
4.4.2 on Ascend Mate 2 doesn't appear to support Album artwork on Lockscreen like my Note 2 4.4.2 did.
I also consistently have 1000 less points on Antutu benchmark ( 27,000 ) on 4.4.2 compared to 4.2.2 ( 28,324 )
I also have one more question if anyone can help me. My IMIE number on my box is the same as the one listed in status on the phone, yet the serial number on my box is now different from the serial number my phone shows in phone status. I don't know if this was always the case, or it changed when I flashed 4.4.2
Which one do you think i should Email to Huawei to see if they will send me an unlock code for bootloader?
I have tried for the hell of it Towelroot, Framaroot, Vroot, Kingo, Kingroot, SRS root, and Root Genius to try and root 4.4.2 to now avail. Root Genius told me it was successful, but no root on reboot.....which sucks.
Click to expand...
Click to collapse
I can't get antutu to work on mine. Also on stock 4.4.2. Not really an issue thought. There's a thread on rooting ham2 here that seems to work without the need to unlock bootloader.
Hi scpion. Thanks for the reply.
Antutu works perfectly for me, so not sure what the problem could be mate.
I managed to Root 4.4.2 in the end using Root Genius 2.0.1.3
Regards !
4L0M said:
Ok, so I found all 4 update files and downloaded them. They are about 900 mb each.
Reboot Success !
4.4 is downloading as we speak...............or as I type, to be precise.
Click to expand...
Click to collapse
Hi there.I have the same phone MT2-L05,the same specs exactly as yours,bought from to2c .
Could you please help and tell me step-by-step first the link you found the updates and then how did yousuccesfully managed that(the updating procedure)?I'm stocked to the 1st step that is,the phone trying to update by it's OTA but never happens so after turning on by itself, I have the screen you allready said a few posts before:
"then above this recovery gives me 4 options :
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
I then choose reboot system and the phone starts up no problem."
and there is no any updating.
Thanks
mAthosalas said:
Hi there.I have the same phone MT2-L05,the same specs exactly as yours,bought from to2c .
Could you please help and tell me step-by-step first the link you found the updates and then how did yousuccesfully managed that(the updating procedure)?I'm stocked to the 1st step that is,the phone trying to update by it's OTA but never happens so after turning on by itself, I have the screen you allready said a few posts before:
"then above this recovery gives me 4 options :
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
I then choose reboot system and the phone starts up no problem."
and there is no any updating.
Thanks
Click to expand...
Click to collapse
Hi there. I will try and help you if I can.
First thing.
Can you please got to "Settings" on your phone, scroll down to "About Phone" and look for "Build Number" and tell me EXACTLY what is listed there, we can then go from there.
4L0M said:
Hi there. I will try and help you if I can.
First thing.
Can you please got to "Settings" on your phone, scroll down to "About Phone" and look for "Build Number" and tell me EXACTLY what is listed there, we can then go from there.
Click to expand...
Click to collapse
Hi there, i want to know where do you get those 4 updates......my phone build is MT2-L05V100R001CHNC00B111.....i also cannot straight flash to kit kat MT2-L05V100R001CHNC00B606.............my phone cannot update OTA....and i also cannot find build after B111
You will find all build on emui.com (Chinese website)
wantwo said:
Hi there, i want to know where do you get those 4 updates......my phone build is MT2-L05V100R001CHNC00B111.....i also cannot straight flash to kit kat MT2-L05V100R001CHNC00B606.............my phone cannot update OTA....and i also cannot find build after B111
Click to expand...
Click to collapse
Here is a List and direct downloads of ALL Roms for Chinese variants of Ascend Mate 1, Ascend Mate 2 and Ascend Mate 7. Just find your model of phone and flash the corresponding Roms in the CORRECT ORDER :
http://susutun1.blogspot.co.uk/2014/06/android-firmware-huawei-m-series.html
I'm in the process of making cm11 and cm12 for the US version of the MT2. It would help greatly if I had a dump of the 4.4 system files for this phone. Unfortunately I don't know how to extract them from the proprietary format. Would anyone be willing to help me out with a system dump from their 4.4 phone? Please PM me and I can provide detailed instructions. You will need to be rooted.
All the US owners would be hugely grateful.
Thanks!
tdm said:
I'm in the process of making cm11 and cm12 for the US version of the MT2. It would help greatly if I had a dump of the 4.4 system files for this phone. Unfortunately I don't know how to extract them from the proprietary format. Would anyone be willing to help me out with a system dump from their 4.4 phone? Please PM me and I can provide detailed instructions. You will need to be rooted.
All the US owners would be hugely grateful.
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2433454
Would that help any tdm?
Moody66 said:
http://forum.xda-developers.com/showthread.php?t=2433454
Would that help any tdm?
Click to expand...
Click to collapse
Thanks, it may. I will need to find someone with a windows box or dig up the referenced perl tools.
I will give it a shot as well. mtyler7807 has used it. I will pm him just in case.
I uploaded a decrypted update image from the MT2-L05 in this forum months ago.
Download it here :
http://forum.xda-developers.com/ascend-mate2/general/resource-unpacked-mt2-l05-4-4-2-t2884764
Greetings, I have a Archos 101b platinum tablet running kitkat and I have been searching around the internet but I just can't seem to find anything about rooting for my tablet.
I would really love to root it and make it possible for apps/games being installed on the SDcard and if possible get an adblock on it. but to do such things I seem to need root access but the amount of information on how to do it for this tablet is so minimal(None) it's driving me crazy.
If anybody is able to help me with this I would really appreciate it.
Extra info:
Android version: 4.2.2
Firmware version: 4.6
Kernel version: 3.3.0
Need Root
Really need helpon this topic guys!
I'm also trying to gain root (even if just temporary) on a 101b platinum, just to remove the google system/app guff.
I assume this is a Generation 10 tablet since it follows "GEN10 TABLETS" in the drop down list for documentation on archos's website.
What I found so far is;
To get to USB debugging you have to press Settings > About > Build, several times to get Developer options, which seems paranoid since ADB alone is nightmare to install and use.
adb root, throws an error about not allowed in production builds.
tried installing the SDE, but it seems the recovery firmware update only accepts ZIP files, so I tried zipping up the AOS file, but the update just errors with "wrong footer".
Tried the Paul/Modoco Gen9 root, but the /data/local folder is locked from user access afaics.
I'm thinking either forcing the SDE on somehow or a firmware mod is the direct solution to root, but I'd ideally like a less destructive version of modding.
Update:
Tried iRoot (formerly vRoot) and Kingo ROOT without any success.
Seems Kingo ROOT goes through known exploits to, I'm suspecting it's been locked down in newer Kitkat.
I doubt a patched firmware will be around until Archos issue a stock one (it's currently missing from the list)
Quick post;
I've noticed a few other people have had the Kingo ROOT crash the boot process on the Archos, and think it's bricked. It's not, if your tablet (or nearly any new consumer electronics) refuses to shutdown for any reason, press and hold the power button until the device powers off. I thought it was common knowledge, but it seems not.
qUE
I have the issue from KingoRoot that everytime I boot up the tablet starts from initial setup so I have to set it up every single time it is switched off.
Rom Archos 101b platinum
Hi guys,
I used king root on this tablet and it completely ruined it, everytime it boots it goes through the initial setup.
Basically i have the file here on my computer that will fix it but i cant find a site to upload it to. If someone can help me out with this i can provide the rom to fix what king root broke .
Regards
Rom Archos 101b platinum
I have the issue from KingoRoot that everytime I boot up the tablet starts from initial setup.
Could you help me?
Thanks.
Stock firmware restored
I restored original firmware of tablet and now it WORKS!
I can provide link to forum solution.
If there is solution to root this tablet, I appreciate it.
Thanks.
Bye,
Gianluca.
hi mate. How did you restore stock firmware? I am desperate to find the rom but there is nowere i can find it on the web. can you please help me??
smasher220 said:
hi mate. How did you restore stock firmware? I am desperate to find the rom but there is nowere i can find it on the web. can you please help me??
Click to expand...
Click to collapse
I send link to forum in PM.
Bye.
unfortunately when i try it it says "footer is wrong" and then "signature verification failed, installation aborted". Any suggestion??
noneid said:
I send link to forum in PM.
Bye.
Click to expand...
Click to collapse
Can you possible send the link to the stock rom to myself please as I just wish to get an ex display model back to factory default
Thanks
Recovery
xanadude said:
Can you possible send the link to the stock rom to myself please as I just wish to get an ex display model back to factory default
Thanks
Click to expand...
Click to collapse
Hi,
I am also trying to reset an ex display model, unable to get any settings options. Have followed instruction on Archos site to flash with stock rom but unable to get to work.
Could u send me link you have and any instructions to assist.
Archos 101b Recovery
Hi,
this is (french language).
archoslounge.net/forum/showthread.php?33555-ARCHOS-101b-PLATINIUM-Pb-au-démarrage[/url].
Bye.
noneid said:
I restored original firmware of tablet and now it WORKS!
I can provide link to forum solution.
If there is solution to root this tablet, I appreciate it.
Thanks.
Bye,
Gianluca.
Click to expand...
Click to collapse
Do you still have link to original load thanks
Link
xanadude said:
Do you still have link to original load thanks
Click to expand...
Click to collapse
This in the link to sw download:
update.archos.com/AFMv1/storage//files/full/ac101bpl/20140812.191729/update-allwinner.zip
Bye.
Error
noneid said:
This in the link to sw download:
update.archos.com/AFMv1/storage//files/full/ac101bpl/20140812.191729/update-allwinner.zip
Bye.
Click to expand...
Click to collapse
Hi,
I try to install via internal or external storage and get an error
"failed to verify, installation failed"
Can anyone help
update-allwinner
karl_1976 said:
Hi,
I try to install via internal or external storage and get an error
"failed to verify, installation failed"
Can anyone help
Click to expand...
Click to collapse
Same result for me too.. Any idea? Thanks
Error
rikk80 said:
Same result for me too.. Any idea? Thanks
Click to expand...
Click to collapse
Went and got a refund. Couldn't be bothered.
I recently picked this 7" tablet, a Ematic EGQ377BL, for a mere $35 new. It was a steal, Quad Core, 8GB storage, 1GB of ram, with an external SD card reader.
It looks similar with similar specs to the 307, but it comes with Android 5.0.1
Now I'm just curious, does anyone know how to root these things?
Or get cyanogenmod or another custom ROM working.
As far as port work goes, what is involved?
edit: I tried "KingRoot 4.1" and aparantly this works.
http://forum.xda-developers.com/and...id-2-x-5-0-t3107461/post60709910#post60709910
you can also replace kingroot with super su following the instructions here:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
I am leaving this here, in hopes that anyone who googles this device can find it.
I paid $35 for this device. The screen sucks, but it has an unlocked bootloader, and root works, and the specs are decent.
updated post. Now, about cyanogen mod/clockwerk/team win
This thing has an unlocked bootloader and recovery, so it should be possible
I picked up one of these also and was able to successfully root it following the link in the OP. I haven't replaced kingroot yet because I tried supersume and it resulted in my device getting stuck in a bootloop. I think I'll wait until I can get a recovery or backup of the OS before I attempt again.