my s5 (g901f) won't turn on can't access to recovery or download mode with keys combination but recognized by pc when i plug it into pc the pc make a sound but phone won't turn on
Related
I have the drivers installed and they work great whenever my phone is not in download mode or odin mode. As soon as i go into download mode the drivers don't recognize it. Odin has nothing in the ID:COM. what am I doing wrong?
Is it still connected to the same usb connector, and samsung kies finds it ?
I had problems with the "non orginal" usb a to mini b cable so i took the orginal one.
And you need to have the usb drivers for kies installed, and when you try odin
make sure that kiestray and keis is terminated and nothing else communicating
with the device and put the phone in download menu by holding "volume down - home and power" down until it boots into download mode then press volume up now you should be able to connect the phone and it identifies it.
Hope it works out for you.
And have you tried on another pc too ?
thank-you
Sent from my Galaxy Nexus using XDA
i flashed my phone using the hasa rom for GB and the rage kernel
now my phone wont enter fastboot or flashmode,
i've tried all methods: from flashtool (fastboot via ADB) and the reboot option in the phone itself
please note that the phone is in fine working conditon...but it just wont enter flash or fastboot mode
used the search option, found nothing
And you tried:
Turning off device, battery in, holding volume up (fastboot mode) and connecting while pressing volume up to pc (led should turn blue)?
Turning off device, battery in, holding volume down (flashmode) and connecting while pressing volume down to pc (led should turn green)?
Drivers are installed? Go to the flashtool installation folder -> drivers and install drivers again...
I'm trying to flash my Pipo S3, but when I plug it, RKAndroidTool returns "No Found RKAndroid rock usb". I have installed the drivers.
I'm using Windows 7 x64.
Thanks.
edit. I wasn't into flash mode, I was into recovery mode.
To get into flash mode with Pipo S3:
1) Start holding Volume +
2) Insert USB
3) Start holding Power
You will hear a notification sound from windows, install drivers if needed and you will be able to flash.
The screen will remain black.
How to connect phone to PC while on recovery mode?
I couldn't find any option for that.
How to connect phone to PC while on recovery mode???
Please give answer....