Good evening ,
I found this wonderful the OS , everything works fine , but I can not set up wired Internet . I enter my login and password in the Dial-Up menu , but nothing happens , the system can not connect to the ISP: not issued Ip , DNS, gateway etc. How do I set it up? I think me need some tool like pppoeconf of Linux. But where to take it ?
thanks for the help.
no support yet ?
i tryed too many version still no one give a support how to connect ethernet pppoe.
Related
*Before anyone yells at me for this..I have searched the forums and google..but still haven't managed to make it work*
So I finally flashed to dCd's 3.2.6 and everything works great..but lets cut to the chase..
I wanted to know how you setup the Remote Desktop Mobile. I've tried a number of things, heres how I did it so far..
1) I enabled the Remote Desktop Assist on my XP computer
2) I enabled the 3389 port on my linksys router
3) I got my IP address through, "Run --> CMD ---> ipconfig"
4) I put all the information into the fields IP address going into the Computer Slot, my account name and password and I left the domain blank (as I've read several forums saying, it should be left blank)
And when I hit connect, it connects for a long time and I get the error message:
Cannot connect. Likely reasons are:
1) The remote computer is not set up for this.
2) Reached the maximum number of connections.
3) A network error occurred while connecting.
I'm in an area with EV-DO connection..and I haven't setup any other remote access computers for it and my computer's remote desktop is on..
Anyone able to point me in the direction that I've done wrong? I really want to get this to work.
P.S. Sorry for the lengthy post!
Much thanks appreciated!!
What version of XP are you running? The Remote Desktop server doesn't exist in XP Home... only in XP Professional.
Also, you may have to open port 3389 in your software firewall, if you are running one.
Assuming you have XP Pro... In your Linksys settings, have you pointed port 3389 to the internal IP of your XP machine? For this to work best, you need to have a static IP assigned to the XP machine instead of letting the Linksys DHCP just assign one. In your network settings on the XP machine, try setting your IP address to 192.168.1.130 (or whatever makes sense with your subnet) and then forwarding port 3389 in the router to that same IP address.
Then, make sure you are using your EXTERNAL IP address in the RDP Mobile settings (it will NOT be a 192.168.x.x type of number). To get your external IP, go to http://www.whatismyip.com.
So, the way it then works is: (example uses bogus external IP of 24.164.1.1 and internal IP of 192.168.1.130)
Your phone connects to 24.164.1.1, which is the external IP of your router.
Your router sees the incoming request on port 3389.
Your router forwards the incoming request to 192.168.1.130
Your XP machine receives the request and you are connected.
Apologies if this is info you already knew... but this way at least it will show up the next time someone searches.
hm..I don't quite understand the static IP part..lol
JokeZony0u said:
hm..I don't quite understand the static IP part..lol
Click to expand...
Click to collapse
http://ask-leo.com/how_do_i_configure_my_static_ip_address.html explains the process very well.
You will need to configure 5 entries:
1. First, hit Start/Run, type in "cmd" (without the quotes) and in the command prompt window that opens up, type "ipconfig /all" (again without the quotes). It will give you something like this:
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : new.rr.com
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
Physical Address. . . . . . . . . : xx-xx-xx-xx-xx
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : xx-xx-xx-xx-xx
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, November 05, 2008 10:24:40 PM
Lease Expires . . . . . . . . . . : Thursday, November 06, 2008 10:24:40 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 24.164.225.25
24.164.225.35
NetBIOS over Tcpip. . . . . . . . : Enabled
and get the primary and secondary DNS server IP addresses. These are generally different for each broadband provider.
2. Then, on the XP computer, follow the directions from the link above (using the following numeric addresses instead of the ones in their example). Assuming you have the standard Linksys settings, you will want to set the IP for the XP machine to 192.168.1.130 (I usually do this so it leaves the lower IPs available for other things added to the network), the subnet mask to 255.255.255.0, and the gateway to 192.168.1.1 (this is the internal address of the router).
3. Then, the only ones left are the primary and secondary DNS server entries... you should have gotten those in step 1 above. If you can't find those there, you may need to call your provider... you could probably Google them too.
It's not terribly complicated, but you do have to make sure you have all the settings correct. Most important is to make sure that the IP you give the XP box is in the same subnet as the router (the first three sets of numbers must match, as in the example above of 192.168.1.1 and 192.168.1.130)... otherwise the XP box and the router won't be able to see each other.
Also, I would suggest doing all of your testing at home using Wifi before you test externally on your carrier network. Connect to your home router using WiFi then, use your INTERNAL IP address (192.168.x.x) to use remote desktop. That way you know your PC is setup properly to use it and don't have to mess with port forwarding or static IP's. As mentioned below, you may need to open port 3389 on your software firewall to get it to work (or just temporarily disable your firewall for testing purposes so you know if that is the problem).
Once you are able to use remote desktop internally, then you can try:
- Set your computer to a static IP (instructions from answerman below)
- Set port forwarding in your router to forward port 3389 to that static IP
- Get your EXTERNAL IP address from http://www.whatismyip.com
- Try connecting to the external IP over your carrier's network.
Also, here are MS's directions for setting up remote desktop on XP. It also includes instructions for opening port 3389 if you use windows firewall.
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
please microsoft, please, update rdp mobile for > 640x480!!!!
Hi,
Is anyone able to connect to the internet with barnacle on 2.1.1.A.0.6 ?
I'm trying with the same settings as the previous firmware that were fine, but it doesn't work anymore...
Thanks ( Sorry for my English )
Hi
I got the same problem and can't
connect to my NB.
Tested few tools for tethering but none of it worked
fine.
At least Barnacle:
It works fine and it is showed in my NB connections
as a peer-to-peer but I can't connect to it.
Tried changing some settings but it still can't connect.
Hope some one could fix the problem.
Xperia x10 mini pro
2.1.1.A.0.6
Barnacle settings:
WEP enabled
Channel 6
Skip wpa_supplicant ✓
Auto associate ✓
WAN rmnet0
LAN auto detect
Greets from Munich
Great! now I know its not only my problem ... Lets hope it gets fixed
Not able to check at this moment,
can anyone try the solutions here?
http://szym.net/barnacle/fix/#dhcp
dont have problem using bernacle.. on 2.1.1.A.0.6.
Hi
dont have problem using bernacle.. on 2.1.1.A.0.6.
Click to expand...
Click to collapse
Can you please show your settings to us
Maybe it would help us ...
ImInMunichBitch said:
Hi
I got the same problem and can't
connect to my NB.
Tested few tools for tethering but none of it worked
fine.
At least Barnacle:
It works fine and it is showed in my NB connections
as a peer-to-peer but I can't connect to it.
Tried changing some settings but it still can't connect.
Hope some one could fix the problem.
Xperia x10 mini pro
2.1.1.A.0.6
Barnacle settings:
WEP enabled
Channel 6
Skip wpa_supplicant ✓
Auto associate ✓
WAN rmnet0
LAN auto detect
Greets from Munich
Click to expand...
Click to collapse
I get the same problem, Since I upgrade to 2.1.1.A.0.6 barnacle doesn't work..
Tested few tools for tethering but none of them worked fine.
No problem for me using barnacle on the latest firmware. Try reinstalling the barnacle or just use titanium back up to restore the apps. Apps is known to malfunctioin when updating or changing firmware
Sent from my U20i using XDA App
ImInMunichBitch said:
Hi
Can you please show your settings to us
Maybe it would help us ...
Click to expand...
Click to collapse
I use the same setting, except different WEP passkey. I use either WEP passkey authentication control or just NAT control, just use random port which starts from 2xxxx.
try re-installing the barnicle.
here the settings I used:
For NAT Control:
WEP : disabled
AutoAssociate : off
Access Control : checked
NAT Reserved Ports : 20009
For WEP Control:
WEP Enabled : 6 or 9 (having conflict with other device, or its only me).
Access Control : unchecked
I don't use both WEP and Nat control at the same time.
Works for me on 2.1.1.A.0.6 with MiniCM-1.0.0-Alpha2, Froyo Cyanogen 6.1 « rom » and WPA supplicant enabled
But it doesn on DarkFab X v1.0 with gingerbread theme
Devilo
After a few trys and some observation I found the Problem. Every baconinginterval the adhoc Network have a other MAC. I try to set a fix BSSID in Barnacle but now i can't find the Network so i undo it.
After some Trys i found a workaround:
1. Start Barnacle
2. Press Associate
3. Try to connect with your Computer
4. After entering password, your Computer try to connect, press 1 time again Associate
My Settings are:
WEP Encyrpting: Enabled
Skip wpa_supplicant: Disabled
Auto Associate: Disabled
WAN: rmnet0
Hi
i tried your workaround,
but it isn't working.
After I entered the password, my netbook immediatley
said "Can't connect to network".
I tried to press Associate, but you can't be this fast
So I still can't tether my connection ...
But thank you for trying
When i retry it 3-4 times it work for me, but with the previous firmeware barnacle work much better.
Hi
I still can't collect,
but I got to that point,
that my netbook says "Enter password"
But when I enter it my netbook
is loading and then again says "Can't connect to network" -_-
Even though I press asocciate when it is loading
or when I enter the key ...
I tried it many times with little changes,
but it don't work ...
now Im having the same problem, I have it working for almost a week, but when I update the barnacle to newest(via android market).. now it is not working even without NAT Control and WEP enabled. I think this is a bug on barnacle release rather than the SE update. coz I got this working on 2.1.1.A.0.6 using old barnacle copy.
any chance someone still have an old version of barnacle?
I haven't yet tried reverting to this copy. its a very old copy of barnacles. see
http://www.esnips.com/doc/0d39f06d-afe1-41fc-9577-0ad6bf1c9093/barnacle
thanks! i'll try this one, once i got to tinker with my sister's lappy.
Hi
i tried it with the older barnacle.apk
Installed it, set settings an started
but i stil can't connect
But thank you for searching this older version
for us
same problem here .. my computer and iPod can connect but the problem is that it's taking me several tries before my gadgets can connect.
i even have to press associate several times and turn on/off barnacle but most of the times it always fails.
with the previous build, my gadgets can connect without any problem.
guys,
i am a total noob and i need some help. I have recently flashed franco.Kernel.v19.4 CFS over stock 2.2 rom.
However for me the wifi tethering is not working which is mostly why i rooted and flashed this kernel.
The scenario is this. I have a 2G connection and i can load any website on dolphin hd (just to say my 2g connection is ok ).
Now i turn on the "portable wi-fi hotspot" on mobile and connect my laptop (windows xp) wifi to this hotspot.
If i do ipconfig on my pc it shows
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.43.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.43.1
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Now i can ping to my gateway (192.168.43.1 which is the mobile) from my pc and there is a reply.
However if I ping google there is no reply.
On my mobile though i can still open google in dolphin browser in this tethered state.
Can somebody tell me how i can fix this.
kernel or rom
ok...one more thing.
This tethering thing never worked for me even when i had the stock kernel or mik's kernel with the touchscreen bug fixed.
Can somebody tell me if this is a problem of the kernel or the rom.
thinking of flashing a new rom.
can somebody point me to a rom on which wifi tethering works.
do u use any proxy settings on your phone? check under your data settings and put them in your browser settings
because in india when we tether i m on Vodafone ofc i have to put in the proxy settings on my browser on my pc before i browse
No proxy in data settings
I checked my data settings. the proxy is not set.
gnsxp...i am also on vodafone based in bangalore. does tethering work for you?
Tethering always worked :-D
here are the SETTINGS for your Browser
Enable Proxy under Network Settings
Use Manual Proxy
for Vodafone
Proxy : 10.10.1.100
Port 9401
Keep Username and Pass Blank
Enter that setting in ur Mozilla
and then Try to access the Web
GL :_D
Hi,
I want to develop an application which runs a Http server without any external modem i.e. both server and wifi tethering should be in same device.
Example lets say android devices A, B and C are there. Now device A will be tethering (wifi hotspot enabled) as well server has to run in it. So that device B and C can connect to it forming a client which can access the server. How do i do this. Pls help...
I tried using server ultimate app, but ended without success since it is working only when i'm connected with external wifi modem/mobile data.
Pls let me know if there are any application exist like my requirement.
Please provide me solution, I'm in need of very urgent.
Thanks in advance
Hi Guys ,
i need/tryed to setup an bluetooth thetering connection from my Acer Aspire 1825PT and my nokia c2-01 . under remix os it dosent work ?! the connection between laptop and mobile phone seem to work , the phone connect to internet and it seem that all works korrekt , but when i open a browser it says no connection ?
have testet the same under windows seven , and it works perfekt ....it mustebe an issue from remix os ?! have googled to find a solution for this , but
only found a guy that have the same trouble like me ( http://www.android-x86.net/index.php?topic=788.0 ) ..
hope somebody can help to fix this ....
EDIT .:
now i tryed to share my internet connection from my home computer , with adhoc ....
when i boot my acer 1825 to windows , it works perfekt , but when i boot into RemixOS , it dont show my Adhoc Connection ...then i tryed to edit SSID manualy in RemixOS ...it works not really , it shows singnal strenght excellent and weak ...and no connection to internet possible ? i dont know what the f... going on XD ...tryed to deactivate wpa2 and make a non secured adhoc , it dosen´t work too ....i think android its incompatible to microsoft adhoc protocoll or similar ?!
hope anybody can help ...sorry for my bad english guys !