Device can enter in fastboot but not in flash mode.
Drivers are correctly installed, (verified by flashing my brothers m2 aqua.)
Device driver shows SEMC FLASH DEVICE. (QHSUSB_BULK)
The green led glow 0.5 second only when entering flash mode.
Flash tool recognised as device connected in debugging off.
I can't flash my Xperia c3 dual.
Please help me guys
Related
Hi,
I had flashed the NexusXperia ROM on my Nexus S just recently. After trying it out I restored the stock ICS 4.0.4....
For some reason the phone keeps on showing the HD bootscreen continously without starting up....
I thought of clearing the dalvik and re-installing via restore however now that it's not got any recovery neither is it being detected on my pc....
I remember deactivating the USB debugging mode and probably this could be the reason it's not being detected....
Is there a way to flash recovery without debugging mode switched ON or is there a way to simply switch ON the USB debugging mode from bootloader screen....
ANY HELP IS APPRECIATED ON THIS....
I have tried on windows 7 as well as on Ubuntu....but the device is not detected....thanks in advance.....
- DarKmentoR
On the Nexus S, holding Volume Up while turning on the power will load the bootloader and from there you should be able to use fastboot to install a custom recovery using fastboot. You should not need USB debugging enabled for this to work.
http://wiki.cyanogenmod.com/wiki/Ne...de#Installing_the_ClockworkMod_Recovery_Image
C:\nexussrootnew> fastboot flash recovery recovery.img
< waiting for device >
-------------------------------------------------------------
Just keeps on waiting for the device....adb not able to detect the device too
The phone is in the bootloader mode and fastboot doesn't detect it? Sounds like it is completely broken then, your only option may be the UnBrickable Mod: http://forum.xda-developers.com/showthread.php?t=1566475
Ok...i can see a "FASTBOOT MODE" written in red when i switch on using Vol+ & Power....
Which mode is it ? Fastboot or Download....?
darkmentor25 said:
Ok...i can see a "FASTBOOT MODE" written in red when i switch on using Vol+ & Power....
Which mode is it ? Fastboot or Download....?
Click to expand...
Click to collapse
Fastboot is the mode you need to be in for fastboot.exe to detect the phone. Put it into that mode and try to flash the recovery with fastboot.exe using the command you posted above.
I have HUAWEI P smart. I am searching for a firmware for flash my phone.
Phone is on CM13+Xposed (Unlocked bootloader)
I download Global Dev 6.12.15 and MiFlash tool.
Put phone in fastboot mode (Power+Volume Up) but phone is not recognised by MiFlash Tool. Help please!
What version of miflash do you have ? By the way it will be better to flash miui rom in edl mode
Turn off the phone completely. Hold Vol+ and Vol- buttons at the same time. Then connect USB cable, you are now in EDL mode. Now you can flash ROMs with MiFlash.
CharlieKasper said:
Phone is on CM13+Xposed (Unlocked bootloader)
I download Global Dev 6.12.15 and MiFlash tool.
Put phone in fastboot mode (Power+Volume Up) but phone is not recognised by MiFlash Tool. Help please!
Click to expand...
Click to collapse
You have to go to edl mode
1. Connect your phone to pc [enable debugging mode]
2. Go here https://drive.google.com/open?id=0B0VFYSHDV7SKbll4RG9oZTFNbVU to download adb terminal, or if you already have it just open the adb terminal, and type:
abd reboot edl
after that your phone will blinking red, thats mean your in edl mode
3. Open Mi Flasher-Browse to your ROM-click refresh-click falsh all at the bottom-and finally click flash-that's all
4. Wait until it reboot, or if you still got that blinking red notification on your phone just power up manually
hi..
Greetings to every Android Magicians out there...!
Device:- MiA1 (Never rooted)
1.USB debugging was enabled and OEM is not enabled.
2.Hence Boot loader is Locked.
3. Adb drivers installed in my laptop.
4.Windows driver signature are disabled.
5. Xaiomi flash tool and drivers installed.
6. Qualcom HS-USB Diagnostics 900E installed.
7. Can be enter in fastboot mode and edl mode as well.
The problem:- My MiA1 was never rooted (USB debugging was enabled and OEM is not enabled.).
All apps are force stopped suddenly while using the phone so tried to reboot my devices,
and there it begins.. it stuck at boot logo.
Things i have tried:
1. Fastboot Mode:
Since the boot loader is locked i cant flash Any ROM through fastboot so i tried to enter in EDL mode through CMD.,But failed.
so i just open the back panel & however entered in EDL mode by Testpoint.
(and i've tried in fastboot through cmd { fastbooot oem unlock } it says successful but when i check the status through
{fastboot oem devices-info} but the bootloader is still locked).
2. Test Point Method:
I tried to flash MiA1 official global version ROM's (7,8,9 as well) through Xaiomi Flash tool(2015,2016,2017 versions) by test point Methods.
i have encountered the problems like AKC don't match and Cant receive Hello packets.
However i have got solved this Prolems by using Beta version of Xaiomi Flash tool.
3. When i flash (tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794) flashing was successful but devices still stuck at
Androidone logo.
Tried to flash other versions of ROM (tissot_images_V10.0.4.0.PDHMIXM_9.0) flashing was successful but devices still stuck at
Androidone logo.
By the way i have tried it using different type C cables and different ports (COM5, COM20,COM40 etc) and and different laptop as well but No luck.
i hope you guys do some Magic and help me out.
Thank you so Much for reading this thread.
So, i have a Wiko View and its hart brickt. I wanna flash it with the Stock Firmware by using QFIL (i tried many other flash tools).
So the problems is:
1. The phone CANT boot, bootloader its locked (CANT unlock with fastboot)
2. USB debugging its not enable.
3. QFIL CANT dedect the phone (i think becouse the qualcomm DIAG port is not enable)
INFO:
the phone CAN boot in fastbootmode
the phone CAN boot in stock recovery
Fastboot detect the Phone properly
ADB driver installed
qualcomm driver installed
Any solution?
Hello, I have doogee s40 phone stuck in bootloop. I do not have unlocked bootloader or enabled usb debugging. I can flash custom rom via SP Flash tools but it does not help.
When I choose recovery mode it just restarts after a while and does not go to the recovery.
I can choose fastboot mode, but since I do not have usb debugging enabled I cannot do anything.
Is there something I can do?