Phone is on CM13+Xposed (Unlocked bootloader)
I download Global Dev 6.12.15 and MiFlash tool.
Put phone in fastboot mode (Power+Volume Up) but phone is not recognised by MiFlash Tool. Help please!
What version of miflash do you have ? By the way it will be better to flash miui rom in edl mode
Turn off the phone completely. Hold Vol+ and Vol- buttons at the same time. Then connect USB cable, you are now in EDL mode. Now you can flash ROMs with MiFlash.
CharlieKasper said:
Phone is on CM13+Xposed (Unlocked bootloader)
I download Global Dev 6.12.15 and MiFlash tool.
Put phone in fastboot mode (Power+Volume Up) but phone is not recognised by MiFlash Tool. Help please!
Click to expand...
Click to collapse
You have to go to edl mode
1. Connect your phone to pc [enable debugging mode]
2. Go here https://drive.google.com/open?id=0B0VFYSHDV7SKbll4RG9oZTFNbVU to download adb terminal, or if you already have it just open the adb terminal, and type:
abd reboot edl
after that your phone will blinking red, thats mean your in edl mode
3. Open Mi Flasher-Browse to your ROM-click refresh-click falsh all at the bottom-and finally click flash-that's all
4. Wait until it reboot, or if you still got that blinking red notification on your phone just power up manually
Related
Hi,
I had flashed the NexusXperia ROM on my Nexus S just recently. After trying it out I restored the stock ICS 4.0.4....
For some reason the phone keeps on showing the HD bootscreen continously without starting up....
I thought of clearing the dalvik and re-installing via restore however now that it's not got any recovery neither is it being detected on my pc....
I remember deactivating the USB debugging mode and probably this could be the reason it's not being detected....
Is there a way to flash recovery without debugging mode switched ON or is there a way to simply switch ON the USB debugging mode from bootloader screen....
ANY HELP IS APPRECIATED ON THIS....
I have tried on windows 7 as well as on Ubuntu....but the device is not detected....thanks in advance.....
- DarKmentoR
On the Nexus S, holding Volume Up while turning on the power will load the bootloader and from there you should be able to use fastboot to install a custom recovery using fastboot. You should not need USB debugging enabled for this to work.
http://wiki.cyanogenmod.com/wiki/Ne...de#Installing_the_ClockworkMod_Recovery_Image
C:\nexussrootnew> fastboot flash recovery recovery.img
< waiting for device >
-------------------------------------------------------------
Just keeps on waiting for the device....adb not able to detect the device too
The phone is in the bootloader mode and fastboot doesn't detect it? Sounds like it is completely broken then, your only option may be the UnBrickable Mod: http://forum.xda-developers.com/showthread.php?t=1566475
Ok...i can see a "FASTBOOT MODE" written in red when i switch on using Vol+ & Power....
Which mode is it ? Fastboot or Download....?
darkmentor25 said:
Ok...i can see a "FASTBOOT MODE" written in red when i switch on using Vol+ & Power....
Which mode is it ? Fastboot or Download....?
Click to expand...
Click to collapse
Fastboot is the mode you need to be in for fastboot.exe to detect the phone. Put it into that mode and try to flash the recovery with fastboot.exe using the command you posted above.
I have HUAWEI P smart. I am searching for a firmware for flash my phone.
after flash Fastboot Rom (Global Stable)
When i power on the device it Stops at mi verification page (see Photos)
both the sim inesrted Then also it is showing plese insert sim(may be this problem solves when I login to mi account But unable to login mi account from this error)
1)iam unable to enter edl mode from adb cmd (Usb debugging is not turned on because this error not allow to access phone)2)EDL mode from Fastboot mod(fastboot cmd) also not working. cmd shows waiting for device (all the driver all installed correctly)
3)unable to enter EDL mode from After diconnect & connecting battery connect computer with volume button pressed together
(last time i enter EDL mode From this type That time mobile is soft bricked)
bootloader Unlocking also stuck at 50% showing Couldn't verify Device this problem is from when i purchesed this mobile
Chinmayhegde said:
after flash Fastboot Rom (Global Stable)
When i power on the device it Stops at mi verification page (see Photos)
both the sim inesrted Then also it is showing plese insert sim(may be this problem solves when I login to mi account But unable to login mi account from this error)
1)iam unable to enter edl mode from adb cmd (Usb debugging is not turned on because this error not allow to access phone)2)EDL mode from Fastboot mod(fastboot cmd) also not working. cmd shows waiting for device (all the driver all installed correctly)
3)unable to enter EDL mode from After diconnect & connecting battery connect computer with volume button pressed together
(last time i enter EDL mode From this type That time mobile is soft bricked)
bootloader Unlocking also stuck at 50% showing Couldn't verify Device this problem is from when i purchesed this mobile
Click to expand...
Click to collapse
If your bootloader was unlocked earlier, long press volume down + power buttons, phone will boot in fastboot. Using XiaoMiFlash tool flash global stable or dev miui fastboot rom
Siddk007 said:
If your bootloader was unlocked earlier, long press volume down + power buttons, phone will boot in fastboot. Using XiaoMiFlash tool flash global stable or dev miui fastboot rom
Click to expand...
Click to collapse
bootloader is locked
did you already try below tools, last time this tool help me to enter edl directly from fastboot. (softbrick in fastboot mode)
fastboot to edl v2
abihary said:
did you already try below tools, last time this tool help me to enter edl directly from fastboot. (softbrick in fastboot mode)
fastboot to edl v2
Click to expand...
Click to collapse
didn't worked
please tell me how to bypass that miui verification error
Hey friends i was able to unlock bootloader of my REDMI NOTE 3 OFFICIALLY.
I wan to root the device and install TWRP but for tat i have to connect my phone in fastboot mode.
The thing is phone is recognised as an adb device when it is on but after putting the phone in fastboot mode my laptop is not showing in cmd after " fastboot devices" command
plz help if anyne know how to fix this.
How are you putting it in fastboot mode?
did you already install correct driver in your pc?
you can try to instal latest mi pc suite which will help you to instal correct driver for your phone.
If you're already success unlocking with official way..then it's mean your fastboot driver already correct (if you're using the same computer when you're unlocking before)
Maybe i think you're missed something to put your phone into fastboot mode..
First way you can go into fastboot mode with ADB command while your phone already ON, just typing command "adb reboot bootloader" then enter..your phone will reboot into fastboot mode
Second way to go into fastboot mode firstly you must turn off your phone..just wait until that phone is truely OFF..
then press and hold volume down button..then followed with pressing and hold power button..your phone will booting into fastboot mode.
Hi all
I have a redmi 4 prada on 7.5.25 China developer.
I cannot enter edl mode, not with the regular (adb reboot edl) when the device is on connected to pc nor with fastboot mode.
It just reboots to android again, not edl mode,
Any ideas?
oslo city said:
Hi all
I have a redmi 4 prada on 7.5.25 China developer.
I cannot enter edl mode, not with the regular (adb reboot edl) when the device is on connected to pc nor with fastboot mode.
It just reboots to android again, not edl mode,
Any ideas?
Click to expand...
Click to collapse
Plus
I have unlocked the bootloader, does that have anything to do with it?
Thanks
EDL reboot might be disabled in this ROM version. Try via tespoint (got to open the phone though).
Just google redmi 4 testpoint.
Turn off the phone completely
Turn it on by pressing ALL 3 buttons at once, and try to plug the USB in fastly
POWER + Volume UP + Volume DOWN
This is how you enter EDL mode
If it doesn't work you need an EDL cable, you can also mod a regular MicroUSB into an EDL cable
hi there, I have a xiaomi device that only goes in fastboot mode. Putting out of fastboot results in a reboot and after that black screen.
-No way to flash with miflash because it needs your phone to be unlocked.
- i cant put the phone in edl because usb debugging needs to be on and i cant go in settings.
phone got detected by my pc when in fastboot mode
What to do now???
daveve said:
hi there, I have a xiaomi device that only goes in fastboot mode. Putting out of fastboot results in a reboot and after that black screen.
-No way to flash with miflash because it needs your phone to be unlocked.
- i cant put the phone in edl because usb debugging needs to be on and i cant go in settings.
phone got detected by my pc when in fastboot mode
What to do now???
Click to expand...
Click to collapse
I don't see any other way, my opinion is that you should unlock it.
HIT THANKS IF FOUND USEFUL
unlock is not possible because you need to put on usb debugging and oem unlock in developer settings but my phone dont start up.
Hi , tell me did you check if your device is recognised in ADB & fastboot command tool ?