Hi so i've messed up bad. I rooted my SM-G925f yesterday which went perfectly, then I installed xposed and tried to install the framework which led my phone to not being able to boot. I tried to flash a stock rom which only fail on Odin and would only boot to the "use smart switch recovery screen", after that I tried to flash a custom rom which guided me to delete the OS at the same time, this failed too. Now I have a phone with no OS and when plugged into PC no USB connection, I still have TWRP but that's all.
Is there any way to fix this or is it now just a paper weight?
Thanks
Last resort to load cm13
TurkPDA marcolomboss
Thanks for the reply, how do I go about loading cm13 ? Especially as I cant seem to make a USB connection
Related
Ugh, totally my fault for not thinking this through.
Had downloaded the Paranoid Android ROM, a newer version from what I had, as I had installed it incorrectly.
So I thought, no worries, I'll just reinstall the ROM.
Booted into recovery mode, did a full wipe and then tried to install the new rom, only I couldn't find it anywhere...
Thinking I'll restart the phone and figure it out from there, but of course it doesn't go past the loading screen.
I can boot into download mode, but on my PC if I boot Odin, it doesn't recognize the phone and I get no yellow colour.
Pretty sure my internal SD card still has one or two custom roms on it, but without booting into recovery mode, I can't do much.
Odin doesn't recognize my phone. I installed the drivers from the samsung website, but it is not reading the phone in download mode.
Now I am unsure if there's another driver I need to install, i.e. a USB driver, seeing as this is a brand new pc, but other than that, I'm stuck.
Any ideas are greatly appreciated!
Download galaxy s3 toolkit from original android development section,install it and agree when asked to install drivers , reboot Pc and cross fingers for your Pc to detect your phone in download mode then just flash stock ROM
Sent from the grey stuff inside my skull
If you have a custom recovery (CWM or TWRP), you can use an OTG cable to connect a USB stick to your phone (which will be discovered by CWM, haven't tried TWRP) and install a new ROM with gapps from it...
Of course if you want to install stock, you have to stick with Odin.
Hope it helps
Hi, XDA! I need your help.
So I'm on this unofficial version of CM 12, link : http://forum.xda-developers.com/galaxy-s3/development/wip-cyanogenmod-12-t2936990
I was on Weekly 8/7/6 of it( I don't remember exactly) (refer to changelog, the top entry date 1/4/15 is weekly 10) and wanted to upgrade to weekly 3(refer to changelog), of cm 12.1 made by the same guy who made the rom i was using, link: http://forum.xda-developers.com/galaxy-s3/development/5-1-x-cyanogenmod-12-1-t3066864. I dirty flashed(if that's what flashing a new rom on top of an old one without factory resetting means) because it was just CM 12.1 ported to S3, and i thought that CM says on it's website that you don't need to factory reset to flash a rom which has a new android version.
When I opened recovery mode, I found out that I had this new recovery, called Cyanogen Recovery. I was like 'Whatevs'. I flashed the new ROM, but about halfway in, it stopped and on the top of the failure report, it said: "cannot load volume /misc" it also said further down "signature verification failed". Now let me tell you that this recovery is pretty limited,no mounting features, no system wiping, no dalvik cache wiping, no signature verification toggle, etc. and on top of that, factory resetting, wiping media or cache didn't show a log of it as it happened, so you didn't know whether it had actually happened. My phone was bricked and it would stay keep going on the starting screen( the head of The CM mascot, the blue android bot, with ripples spreading from it)
I was like 'okay, i can do this'. I connected my phone to my pc, installed samsung usb drivers from the net, installed Odin, downloaded philz touch recovery ( a tar md5 version) (to flash it using ODIN and then flash one of the different cm 12/ cm 11 roms located in my external sd card,using the new recovery) , put the phone in download mode, but Odin wouldnt recognize it. It was admin mode, just so you know. No ID:COM would show up. I tried everything, putting in download mode before connecting it to the PC, reinstalling the drivers, trying different versions of the drivers, trying different versions of Odin, allowing Odin all access and security permissions for all users to my PC, compatibility mode for windows 7(im on win 8), factory resetting, wiping media and cache, using different wires and ports, even the ones on the back of the system unit(system box or CPU), doing all this stuff on my mum's laptop(it's a windows 7 laptop), like doing almost everything. My phone starts charging, so it isn't a problem with the phone. I looked up the issue on Google, and found other people had the volume /misc and signature issue too. My phone starts charging when I connect it, so it isn't an issue with the phone's micro USB port, but if it is, please tell me. I read somewhere that USB debugging might have something to do with it, but I can't change that setting cos' my phone's bricked.
XDA, HELP ME PLEASE!
If you can still go to your cm recovery, you can install philz from there.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.zip
Download the zip file, flash it through cm recovery , turn off your phone and boot it to new recovery.
https://www.dropbox.com/s/qzgn1abhr4qcmls/Ultimate_Kernel_Cleaning_Script_v1.0_en_SGS3.zip?dl=0
https://www.dropbox.com/s/f1zbm0tvsvh5ww5/MegaWipe_-_GS3.zip?dl=0
Also use these two to wipe clean your entire phone even kernel or system leftovers. If odin still doesnt see your phone, try to install a custom rom
After flashing a zip, i get error "recv error on uevent" in Twrp + phone dont charge
Hi,
I messed up!
I had a Redmi Note 4X, snapdragon, with Rom Pixel Experience and Magisk 18.0.
I was navigating the forum and installed a zip via Magisk to enable ARCore ( ww.celsoazevedo.com/files/a...gle-camera/ar/ ) so i could have the app Measure working. It worked but then i noticed my phone wasnt charging properly, i tried different chargers and cables, it wasnt charging properly. Then i noticed it could charge, but only turned off .
- I made a clean flash (wiped cache, dalvik, data and vendor) and installed the Pixel Experience rom again, but the same thing happens, when i connect the cable to charge the phone goes crazy, is always connecting and disconnecting...
- I installed via FastBoot the Global Rom from Miui, and the same thing happens regarding charging the phone.
- I installed again the latest Twrp image via fastboot, and installed via recovery the latest Pixel Experience Rom, making a clean flash again
In any processes inside TWRP , there is a error saying "E: recv error on uevent". Although the Rom is installed properly and im using the phone
But it always happens the same, wether in the rom, wether in Twrp, if i connect usb cable, from computer or power charger, the phone is always connecting and disconnecting. I charged it over night liked this, it took about 8 hours to charge 80% of battery
Anyone can help, please? Any fix for this?
I am getting the same issue. Were you able to solve it?
my phone does not load with this same problem any solution ??? I ask for help from the dev masters.??
So after updating the phone to miui 11, the file transfer mtp using USB was not working...
Tried everything, installing drivers, changing pc, cable. lit every possible thing...
Finally decided to flash an older version of rom.
it was successful, but still, usb file transfer was not working.
So, thought to install custom rom, and for that, i installed twrp, and by mistake, i cleaned everything including the system.
now, my phone got dead. but still, fastboot bootloader mode was working, So, I tried a different bunch of commands that I found over internet. but nothing worked.
So, again I flashed the stock rom using mi tool, and it broke the last working thing also(fastboot screen).. and my phone stuck in a loop. it just vibrates and turns on-off without any indication on-screen(no Mi logo, no charging light, nothing)...
at last, tried EDL mode, but still no luck, i tried different version of stock rom using EDL mode also. nothing working....
Need help to fix this phone.
I had a J6, just rooted months ago. Everything was fine, I got it rooted successfully, and today I just updated Magisk this afternoon and restart it. And it got bootloop.
I don't know what to do so I wipe data and cache partition. It didn't help
My phone can't connect to my laptop, Odin didn't detect my phone, Installing Samsung USB Drivers didn't help
My phone could only go to recovery mode and go to Downloading mode
Can anyone help me plz?
Try to reflash the stock rom maybe
Hello,
is your phone a SM-J600FN/DS? And how do you root?
Thanks
Efcegames said:
Try to reflash the stock rom maybe
Click to expand...
Click to collapse
To reflash the stock ROM we need Odin to detect my phone to flash. It didn't detect anything (despite already have Samsung USB Driver). I was stupid not installing TWRP before rooting my phone. What should I do now?
[SOLVED]: IT WAS THE CABLE PROBLEM​
It turns out that the problem all along was the cable. I had 2 Micro USB cables and none of them connect the phone to computer, only in charge mode
So I borrowed my mom's Xiaomi cable and it worked perfectly. Just connect to computer, open Odin and flash the stock ROM back.
After this incident I don't feel like I want to root phone. It was good but it seems to me that Magisk has a lot of problems right now... Or probably just me