[Rom][6.0.1][e23xx][UB]prerooted stock xperia m4 aqua - Sony Xperia M4 Aqua

FEATURES
Based on stock 26.3.X.0.131
rooted with latest SuperSU v2.76
Smooth and Fast
fully Debloated
busybox installed
Xperia XP features
hosts with no ads
Xposed installed (you don need to flash any zip just install the apk from here )
more to come..​
REQUIREMENTS
Sony Xperia M4 aqua
unlocked bootlaoder
stock rom 26.3.X.0.131
INSTRUCTIONS ​
1. download M4_AQUA_Vx_PiSpecialist_XDA.zip (from post 3), extract to adb/fastboot folder.
2. go to TWRP recovery, wipe data, cache, dalvik cache.
3. power off the phone, get the phone in fastboot mode( holding volume up+connecting usb cable).
4.open adb shell and type:
Code:
fastboot devices
fastboot flash -S 256M system system.img
fastboot flash boot boot.img
if you get invalid sparse error, ignore it and wait until fastboot complete the process.
5. Reboot manually or
Code:
fastboot reboot
6.wait 20~~30mn.
7.profit and press thanks button.
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested only on E2303, you can test it in other variants and report,
XDA:DevDB Information
PREROOTED STOCK E3XX, ROM for the Sony Xperia M4 Aqua
Contributors
PiSpecialist, PiSpecialist
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: BASED ON STOCK
Version Information
Status: Stable
Current Stable Version: 21/07/2016
Stable Release Date: 2016-07-21
Created 2016-07-21
Last Updated 2016-07-25

changelog:
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
v 1.0
Based on stock 26.3.0.131
Prerooted
Debloated
xposed
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
v 2.0
Fully debloated
added busybox
added latest xperia home from Xperia XP with double tap to sleep
ported Xperia XP skins (apps and themes)
added adblocker
added sony weather
added qualcomm assertive display​

DOWNLOADS​---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------​Single SIM​M4_AQUA_V1_PiSpecialist_XDA
M4_AQUA_V2_PiSpecialist_XDA(with xposed)
M4_AQUA_V2_PiSpecialist_XDA(without xposed)need v1 installed
---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Dual Sim
Flash this M4_AQUA_V2_PiSpecialist_XDA via recovery, don't reboot, flash this , reboot and wait(about 40mn) ​
FAQS​
Q. How to enter recovery while you are facing a booloop?
A. Hold power and volum up for 10 seconds, when the screen goes to black release volum up and hold volume down until the phone vibrate, release power and keep holding repeatedly volume down until you see twrp splash.​

Thanks . Nice. Work really appreciated.
I'll try as soon as possible.
Sent from my E2303 using XDA Free mobile app

It will be flasheable with TWRP? Everything works fine? It has Basque language included? Thank you.

Good job !

Excellent

download link added

does its work also in dual sIm varient?

So how much space does it have after flashing?
EDIT: So I flashed it, and there's still bloatware which i can't uninstall.

Works perfectly thanks.
Btw its not fully debloated.

No solution to create a zip, can be simpler for many users ?
Sent from my E2303 using XDA Free mobile app

TheVektor said:
Works perfectly thanks.
Btw its not fully debloated.
Click to expand...
Click to collapse
yes, iam working on v2 more cleaned
k1ks said:
No solution to create a zip, can be simpler for many users ?
Sent from my E2303 using XDA Free mobile app
Click to expand...
Click to collapse
already tested a flashable zip but give bootloop, problem with odexed files, since sony created a new system.odex.sqsh that contains all odex files, iam working on deodex.

PiSpecialist said:
yes, iam working on v2 more cleaned
already tested a flashable zip but give bootloop, problem with odexed files, since sony created a new system.odex.sqsh that contains all odex files, iam working on deodex.
Click to expand...
Click to collapse
Cm13 boot without worries.
Dont backup odex files , uneless.
Look at backuptool functions.
Nice shoot. Everyone waiting that.
Sent from my E2303 using XDA Free mobile app

Can't download "system.img" please check link cuz just in cloud is posible
https://i.imgsafe.org/2350634472.jpg

s3-f4n said:
Can't download "system.img" please check link cuz just in cloud is posible
https://i.imgsafe.org/2350634472.jpg
Click to expand...
Click to collapse
save it in your cloud and download, my upload speed isn't good so i can't upload to another server for now. (anyone can upload it to mega or drive??)

Already upload in mega.
Thanks for your work i will test it later.
https://mega.nz/#!iFsjAChQ!ZX2ABOQK1kLCXYTMi_XBQgzpLs-SlG4uOaVUxMD7bxI
---------- Post added at 08:20 PM ---------- Previous post was at 08:13 PM ----------
TheVektor said:
Works perfectly thanks.
Btw its not fully debloated.
Click to expand...
Click to collapse
In that case you can share with all what can you do

s3-f4n said:
Already upload in mega.
Thanks for your work i will test it later.
https://mega.nz/#!iFsjAChQ!ZX2ABOQK1kLCXYTMi_XBQgzpLs-SlG4uOaVUxMD7bxI
---------- Post added at 08:20 PM ---------- Previous post was at 08:13 PM ----------
In that case you can share with all what can you do
Click to expand...
Click to collapse
thanks for the link, added to OP

PiSpecialist said:
thanks for the link, added to OP
Click to expand...
Click to collapse
Any time bro .
P.S. i know speed internet in spain and if you need just tell me .

ADB doesn't work
I have installed latest ADB and Fastboot drivers but everytime when I try adb shell it tells me that my device is unauthorized, I try to fix this but I can't. I change the USB cables, nothing ask me for usb debugging when I plug my phone. And i'm sure this is for the first time that I'm using ADB with this ROM, I delete abdkey and abdkey.pub in C:/User, but it doesn't work. I unistall PC Companion, nothing change, I reinstall ADB driver, I install driver from adbdriver.com but it doesn't work. I try to remove misc/adb with Root browser but in adb there isn't file. I restart PC and I try adb kill-server, then I restart phone but it doesn't work. Can you fix this issue or I'll back to Android Lolipop, sorry for bad English :laugh:

Related

M4X - Porting Tool v1.1.0 (06/17/2012)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi guys recently I do not have that much time for playing with roms, so I made this tools to let you port latest MIUIv4 for you Xperia phone, engine supports Neo, NeoV and Ray (I didn't test)
I build MIUIv4 from source, but porting is almost the same or maybe even the same effective way to get latest MIUIv4.
M4X is compatible with miuiandroid and miuiscotland roms (didn't test with Chinese's and US's)
Changelog:
04/28/2012
-support for 3 devices: neo/neov/ray
05/02/2012
-support for kernels
-support for custom apps
-support for init.d tweaks
-annoying notification about enabled/disabled mobile data transfer has been deactivated
06/17/2012
-update for full support new base (sony ics 4.0.4)
Tpis:
In main folder /miui4xperia you can see two shortcuts /apps-custom and /init.d-custom , if you wanna add any custom app or init.d script directly to your rom add your files there before you start porting.
IMPORTANT! Do not delete or edit any existing file from \miui4xperia\tools\resources\ or two shortcuts
How it works:
Download: M4X by Z25 | md5: 0C3B2B5F8D131B7D73B579F95F7A72D4
Thanks. Tested with MIUI Scotland 2.4.27v2 and the official Nordic release and it works fine on the Neo. In addition to the camera fix, I had to make a small tweak to get the flash working.
In case anyone finds it useful, I have attached the camera fix below.
t3chg33k said:
Thanks. Tested with MIUI Scotland 2.4.27v2 and the official Nordic release and it works fine on the Neo. In addition to the camera fix, I had to make a small tweak to get the flash working.
In case anyone finds it useful, I have attached the camera fix below.
Click to expand...
Click to collapse
how did you converted system.sin to system.img from nordic release? sin2img only copied source system.sin and didn't converted it to img.
pawo99 said:
how did you converted system.sin to system.img from nordic release? sin2img only copied source system.sin and didn't converted it to img.
Click to expand...
Click to collapse
I had taken a backup on a fresh flash, but this should work as well.
http://forum.xda-developers.com/showthread.php?t=1598924
same tool couldnt be done for nordic/.562 ROM?
@palimatix it could, but am not the one that is responsible for not compatible 'mi code' with .562, when they will make necessary changes over 'mi code' then I will think about it
okies.. and a huge bunch of thanks for lending out your work/tool to the community.
Thanks !
Sure, you're welcome
I will add the second menu to make it even more easy:
example: no needs for camera patch for neo, cause when you will pick Neo (mt15i) then engine will take correct files, thanks @t3chg33k for attachment
btw. will add this tomorrow
ZduneX25 I need your help. I did everything as you said. I only have one issue. There is no option to add a google account. Is that a way to fix it?
@saladbar if you used miuiandroid or chinese rom then there is no gapps, so you have to flash theme through recovery, take 'em from cm9 thread
pawo99 said:
how did you converted system.sin to system.img from nordic release? sin2img only copied source system.sin and didn't converted it to img.
Click to expand...
Click to collapse
I used my CWM backup of Nordic, and so far everything is working great.
Smoother than 2.4.6 that I have tested before :>
Big thanks for the tool!
You're welcome guys, glad you are enjoying it
OP download link has been updated with version from post #8
ZduneX25 no... i mean there is no option to add a google account. In settings> personal>accounts & sync.
@saladbar because you need to do it through vending.apk.. which is a part of gapps
btw. guys go to cmd and type: echo %date:~3% how it looks like?? for me it's: 2-04-28 and that is how I added support for miui version in phone details, but I need some info from other countries (date format can be different)
@ZduneX25 I've flashed MIUI 2.4.27 from here:
http://miuiandroid.com/community/threads/miui-rom-2-4-27-ics.16355/
and 2nd flash from here :
http://www.miui.us/
In both flashes i did flashed ics gapps from fxp thread. Nothing happened. No option for google account.
MIUI android has its own gapps that needs to be flashed.. try that..
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
JoHnNy08PL said:
I used my CWM backup of Nordic, and so far everything is working great.
Click to expand...
Click to collapse
You mean the tool is working good even with official/final nordic build ? That would be great
palimatix said:
MIUI android has its own gapps that needs to be flashed.. try that..
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
You mean the tool is working good even with official/final nordic build ? That would be great
Click to expand...
Click to collapse
Mentioned in post#2 itself, you just need the system folder from the official release and you are good to go.
Tool is fine. Many thanks ZduneX25!
I have Compass issue. It is not heading to North but to West
@pawo99 like it ever work it happens to me since miui gb ;p shake your phone you will see that whole this compass is fake my is spinning
palimatix said:
MIUI android has its own gapps that needs to be flashed.. try that..
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
You mean the tool is working good even with official/final nordic build ? That would be great
Click to expand...
Click to collapse
Yes, I had a clean backup of Nordic.
ro.build.fingerprint=SEMC/MT11i_1255-1755/MT11i:4.0.3/4.1.A.0.562/zf1_3w:user/release-keys
And everything is working great.
Used MIUI Scotland 2.4.27v2
So far it's the best ICS ROM for me :>
But I have a trouble with installing DSP Manager(my Jays headphones love DSPManager+PowerAMP and that's why I want some ICS ROM - DSP on GB is weak). I have installed some pack for ICS with libs, but it doesn't work :/
Any idea?

Auto pre root script/Rooted galaxy star duos via firmware!!!

HELLO USERS OF GT-S5282!!
HERE I PRESENT THE PRE ROOTED FIRMWARE TO YOU ALL :laugh:
WHICH GIVES YOU ROOT PERMISSION IN YOUR SAMSUNG GALAXY STAR DUOS:good::good:
THIS FIRMWARE IS BASED ON BASEBAND VERSION S5282DDAMF1 AND BUILD NUMBER JZO54K.S5282XXAMF4..
LINKS TO DOWNLOAD:
PREROOTED_FIRMWARE.7z.001
PREROOTED_FIRMWARE.7z.002
PREROOTED_FIRMWARE.7z.003
PREROOTED_FIRMWARE.7z.004
PREROOTED_FIRMWARE.7z.005
PREROOTED_FIRMWARE.7z.006
PREROOTED_FIRMWARE.7z.007
PREROOTED_FIRMWARE.7z.008​
INSTRUCTIONS:
DOWNLOAD ALL THE ABOVE FILES AND PUT THEM IN ONE FOLDER..
AND RIGHT CLICK ON PREROOTED_FIRMWARE.7Z.001 AND EXTARCT USING 7ZIP ONLY..!!!!!!!!!!!!!!!!!!
AND YOU WILL GET A .ZIP FILE WHICH WILL HAVE PREROOTED_FIRMWARE.TAR AND INSTRUCTION TEXT ..
FINALLY FOLLOW THE INSTRUCTION.TXT..
AFTER FLASHIN VIA ODIN YOU PHONE WILL BE HAVING ROOT PERMISSIONS..
HAVE FUN FRIENDS :good::good:
AND MAIN THING DON'T FORGET TO PRESS THANKS
CAUSE I'VE WORKED HARD TO DO THIS
***NOTE****
***EXTARCT USING 7ZIP***
To avoid blank screen issues..!!
Download files to pc!!!!!!!!!
Not mobile UC browser please.....!!!
__________________________________________________________
DON'T FLASH THIS ON GT-S5280!!!!
YOU MIGHT BRICK YOUR PHONE!!
HERE PICS FOR CONFIRMATION:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Auto pre-root script for gt-s5282!!!!!!!
Hi every one...
People were soft bricking their mobile..
So i'm introducing auto pre root script for our mobile only...
You can pre-root any firmware of GT-S5282..
Here is the link:
AUTO-PRE-ROOT-SCRIPT
UPDATE(Bugs fixed hope so):
AUTO-PRE-ROOT-SCRIPT-V1.0
Intsructions(UPDATED):
***EXTRACT THE DOWNLOADED .ZIP FILE TO HOME FOLDER AND PASTE THE SYSTEM.IMG FILE OF THE FIRMWARE YOU WANT TO PRE ROOT**
SOME WERE REPORTING THAT THE SCRIPT WAS GIVING PROB WITHOUT SYSTEM.IMG WHAT THAT SCRIPT GONNA DO MEANINGLESS??
PLEASE FOLLOW THE INSTRUCTION..
1).First and for most you should be having linux ubuntu any version.
2).You should be running as a root(Optional) user.
3).Extract the contents of the downloaded file to your home folder.
4).Then open terminal and type:
sudo chmod +x Auto-pre-root-GT-S5282.sh
bash Auto-pre-root-GT-S5282.sh
5).Let the script do it work And just wait for the output file.
6).Finally you will get a .tar file.
7).Flash that tar file via latest odin.
NOTE::::: This script runs only on linux!! | Anybody interested to port this script to their mob FEEL FREE TO EDIT THE SCRIPT IT'S OPEN SOURCE :good:
Edit only one command will help in porting,
" sudo ./make_ext4fs -s -l 800M -a system pre_rooted_system.img ~/system/ "
Just change that 800M to your system.img size i pressume..
Have fun friends..
DONT FORGET TO PRESS THANKS ​
RES
Credits:
1).Chainfire for the SuperUser.apk and su files.
2).To andwise for his [GUIDE] Unpack/repack ext4 Android system images.
3). To Google helps a lot
RES
RESERVE3
Stock Deodexed Pre Rooted Firmware
:laugh:Custom Rom/Firmware for GT-S5282 :laugh:
Flash through odin friends
same procedure as extracting from 7ZIP :good:
Features:
1).Stock deodexed based on latest firmware(Baseband Version-S5282DDAMG1/Build Number-JZO54K.S5282XXAMH4).
2).Pre rooted.
3).Bloatwares removed-no lags.
Download Links
FLASH THIS FIRST FLASH THIS FIRST AND FLASH THE BELOW ONE
Stock-Deodexed-custom-firnware.7z.001
Stock-Deodexed-custom-firnware.7z.002
Stock-Deodexed-custom-firnware.7z.003
Stock-Deodexed-custom-firnware.7z.004
Stock-Deodexed-custom-firnware.7z.005
Stock-Deodexed-custom-firnware.7z.006
Stock-Deodexed-custom-firnware.7z.007
same procedure as flashing pre rooted firmware...
​
okay dude DOWNLOADING
Thanks
thanx chirtagh...m downloading it
So now we can expect a custom rom, anyways thanks
You can't control the wind, but you can adjust your sails
Sent Form My Galaxy Tab 2 GT-P3100 ,Dual booted using Black Hawk Kernel
anjaykumar said:
So now we can expect a custom rom, anyways thanks
You can't control the wind, but you can adjust your sails
Sent Form My Galaxy Tab 2 GT-P3100 ,Dual booted using Black Hawk Kernel
Click to expand...
Click to collapse
yeah right custom rom tweak all
---------- Post added at 08:41 PM ---------- Previous post was at 08:07 PM ----------
Success Rooting Samsung Galaxy Star S5282
Thanks so much @Chirtagh
Hi there..
FRIENDS PLEASE DON'T QUOTE THE ORIGINAL POST EDIT YOUR POST AND REMOVE IT..
LETS KEEP THIS THREAD CLEAN :good:
SUPERB FRIENDS THANK YOU ALL
Hi there..
---------- Post added at 08:41 PM ---------- Previous post was at 08:07 PM ----------
Success Rooting Samsung Galaxy Star S5282
Thanks so much @chartagh
Click to expand...
Click to collapse
So it worked for you bro??
Chirtagh said:
---------- Post added at 08:41 PM ---------- Previous post was at 08:07 PM ----------
So it worked for you bro??
Click to expand...
Click to collapse
yes bro its work
GOOD..
jpnazar08 said:
yes bro its work
Click to expand...
Click to collapse
GOOD ENJOY ROOT PRIVILEGES :good::good:
HAVE FUN
Chirtagh said:
GOOD ENJOY ROOT PRIVILEGES :good::good:
HAVE FUN
Click to expand...
Click to collapse
THANKS
Thanks
rooted successfully S5282........:good::victory:
%-#@[email protected]@#7##%%&//*%/
Ittt didnt work...!!!!!!!!!!!wen it reboots nothing shows on the [email protected]@@@@@!!!!!
swhackeristahsan said:
Ittt didnt work...!!!!!!!!!!!wen it reboots nothing shows on the [email protected]@@@@@!!!!!
Click to expand...
Click to collapse
okay expailn me wat you did?? it should work is your mob gt-s5282?
and did you follow the procedure??
explain me clearly how you flashed it??
then i can help you..
fjjhjf
My phone is gt s5282..i downloaded all the files and placed them in a folder and extracted the 1st file..then i went into download mode via hotkeys on my phone and flashed the prerooted firmware via pda on odin..it flashed and rebooted but all i cud hear was the sounds..cud see nuthing (((((((((...my phone is updated to the latest kernel
swhackeristahsan said:
My phone is gt s5282..i downloaded all the files and placed them in a folder and extracted the 1st file..then i went into download mode via hotkeys on my phone and flashed the prerooted firmware via pda on odin..it flashed and rebooted but all i cud hear was the sounds..cud see nuthing (((((((((...my phone is updated to the latest kernel
Click to expand...
Click to collapse
did you flash .tar file ? flash again.. if doeant works wipe cache reset the data and try once again.. and tell me..
Hi chirtagh
Hv takn nandroid backup thr is no revovery found n this device is showing xperis tl t30
Sent from my GT-S5282 using xda premium

[Port][ROM][4.1.2] ShenDuOS v3 [Light Edition] [16/11/2013][Dev stopped]

Hi guys I m going to present you Shendu OS.
I m new to development,And this is my first port but if you guys will support i will give you my best.This Rom is port of @xx214718247's ROM.This is Hybrid of MIUI and CM10.
Working:
WiFi
mobile data
Camera (Now fully working)
Video playback
Almost everything
H/W Decoders
Bugs:
CM 10 Bugs
ext card not mount in MTP (framework)
WiFi tethering
Reboot into recovery
Credits:
@xx214718247 - For his awesome ROM
@FXP - for CM 10
@akkufix - for illumination bar bug fix,helping me to fix framework
@DevSwift1- For his AOSP ROM
@SimbyOS-For his Idea
XDA-guides - for helping me to port ROM
And every dev who helped me directly or indirectly
@Abhinav2 : for Ultra slim Gapps
@h0rn3t : for Performance control App
@slaid480 for Scripts
@SimbyOS and @garynych for BE 6.0 kernel
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM link :
-ShenDuOS v1
-ShenDuOS v2
-ShenDuOS v3
Gapps:link
Framework-fix : here
How to Install : Link
Changelog V3 :
Debloated
Added Google camera and galllery
BE 6.0 faster kernel
Added few scripts
Added SuperSU
Added perfromance control app
@SuperX002great rom but why? we have too many roms that are not completed..! and we don't have side camera next time don't do copy paste but check what you write, thanks for the rom, happy develpment!
alexhdkn said:
@SuperX002great rom but why? we have too many roms that are not completed..! and we don't have side camera next time don't do copy paste but check what you write, thanks for the rom, happy develpment!
Click to expand...
Click to collapse
Keep your opinion to yourself and stop littering over the forum !!! If you wanna then start development and make so called "COMPLETE ROMS"..
Happy littering !!!
Sent from my Xperia Sola using xda premium
I didn't post anything about side camera.and I m currently developing ROM and i will release huge update in 2-3 days. Which will solve every issues.
framework fix updated check links
Due to exams i m not able to update Rom and I will update Rom after FXP fix remaining bugs
ShenDuOS V2 Uploading : Link
Changelog:
- Video recording fixed
-H/W decoders
hi i'm getting bootloop in Shendu v2
i've flashed the boot from the rom using fastboot,
wiped everything,
flashed rom,
wiped everything,
flashed fix and wipe / skipped
reboot
even tried flashing .54 kernel before flashing the boot.
can you help?
I don't know how this happening but you need to follow this step
Download this framework apk put it into zip-->system/framework
then flashROM
flash gapps
Wipe everything and reboot
if your ROm booted properly then apply framework fix : post
Thanks, adding the framework.apk worked, i installed it and applied your fix, but now i can't turn on WIFI, it gets stuck in Wifi turning on, Bluetooth and other radio options work,
maybe it is a carry over of the Wifi Tether bug??
Will attach logcat as soon as possible
---------- Post added at 10:58 PM ---------- Previous post was at 10:13 PM ----------
it seems i can't even install even a single app from the market,
Screenshots attached.
sheron said:
Thanks, adding the framework.apk worked, i installed it and applied your fix, but now i can't turn on WIFI, it gets stuck in Wifi turning on, Bluetooth and other radio options work,
maybe it is a carry over of the Wifi Tether bug??
Will attach logcat as soon as possible
---------- Post added at 10:58 PM ---------- Previous post was at 10:13 PM ----------
it seems i can't even install even a single app from the market,
Screenshots attached.
Click to expand...
Click to collapse
Wifi is working for me try reflash and wipe cache and delvick cahe (Don't wipe data - if you want to keep you app) and for google play store i face same problem on even ICS yesterday it took 8 h to update subway surfer i think it google server problem or gapps, reflash gapps.
EDIT: try experimental CM 10 kernel
really cant get the rom working,... first its starts very long and then if its starts then I get back to the boot... help me pls
How is the battery life and ram management on this rom??
ShoaibAhmed said:
I don't know how this happening but you need to follow this step
Download this framework apk put it into zip-->system/framework
then flashROM
flash gapps
Wipe everything and reboot
if your ROm booted properly then apply framework fix : post
Click to expand...
Click to collapse
Use this framework and boot , but also wifi cant use
so i try experimental CM 10 kernel then wifi work
not bad! Get it on
the RAM just got 170MB
sorry for my bad english
ShenDuOS V3 : Link
SuperSU : Official Link
Ultra Slim gapps : Link
How to install :
Copy Rom, SuperSu,Gapps in SD card
Flash kernel
Boot in CWM
Flash ROM , SuperSu,Gapps
Full Wipe
Reboot
Hot fix V3 : Su.zip
Open su.zip,extratc it and place the su file in ShenduOSv3/system/xbin
ShoaibAhmed said:
ShenDuOS V3 : Link
SuperSU : Official Link
Ultra Slim gapps : Link
Click to expand...
Click to collapse
Changelog??
littleg33k said:
Changelog??
Click to expand...
Click to collapse
Under Download link section
ShoaibAhmed said:
ShenDuOS V3 : Link
SuperSU : Official Link
Ultra Slim gapps : Link
Click to expand...
Click to collapse
Great, that you are working furthermore on this rom.
Think, i will take some time and test it.
Some first impressions about speed?

[Root][TWRP][UB][Kernel][Lollipop][D6603/6653] Stock flashable kernel 23.1.A.0.690

Stock flashable kernel 23.1.A.0.690 with integrated TWRP
ONLY FOR UNLOCKED BOOTLOADERS!
Works fine with D6603 and 6653!
Flash via recovery or unpack and flash boot.img via fastboot.
In kernel repacked ramdisk with:
-ric disabled
-adb enabled
-camera api 2
-security 0
-tad off
-init.d enabled
Changelog:
v1 TWRP 2.8.5.0 Download v1
v2 TWRP 2.8.6.0 Download v2
THX my friend from russian comunity for huge help!
For root flash latest SuperSu via recovery.
I have fine working xposed without bootloops (video proof) with this steps:
1. fresh ftf install with full wipes
2. install kernel from this thread
3. install supersu via recovery
4. boot system
5. install titanium backup
6. remove useless system apps
7. clean dalvik via titanium backup
8. reboot system
9. boot recovery and install xposed zip file via recovery
10. boot system and clean dalvik via titanium backup
11. reboot
12. install xposed apk
13. reboot
14. install gravity box module
15. reboot
16. done
With this steps I never have bootloops with xposed.
DRM Restore Function
Camera api 2???? So does this enable raw shooting?
According to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doesn't!
dedei said:
Camera api 2???? So does this enable raw shooting?
Click to expand...
Click to collapse
its just shows applications that camera api functions enabled in kernel, but it doesn't mean that they are presented Sony didn't include new camera drivers in kernel maybe later thay will add them
Any chance we can get kexec for multirom in next release? thanks.. Oh yeah and when you say security -0, do you mean SE linux disabled/permissive?..
corpsegrinder62 said:
Any chance we can get kexec for multirom in next release? thanks.. Oh yeah and when you say security -0, do you mean SE linux disabled/permissive?..
Click to expand...
Click to collapse
no chance I just repacked stock kernel SE linux should be off...I don't know how to check this. But I don't have any problems (full working root, recovery, system mounting, XPOSED!)
I'm not developer, I'm just experienced user
Desperanto86 said:
no chance I just repacked stock kernel SE linux should be off...I don't know how to check this. But I don't have any problems (full working root, recovery, system mounting, XPOSED!)
I'm not developer, I'm just experienced user
Click to expand...
Click to collapse
Thanks.. was waiting for a kernel with SE linux disabled for xposed
corpsegrinder62 said:
Thanks.. was waiting for a kernel with SE linux disabled for xposed
Click to expand...
Click to collapse
don't forget to use LP xposed alfa. old KK xposed doesn't work
Can we use DRM function restore with this one or that patch needs the stock kernel?
sgiannouris said:
Can we use DRM function restore with this one or that patch needs the stock kernel?
Click to expand...
Click to collapse
DRM restore need fully stock kernel.sin...repacked stock kernel automaticaly comes custom kernel for locked bootloader
Desperanto86 said:
DRM restore need fully stock kernel.sin...repacked stock kernel automaticaly comes custom kernel for locked bootloader
Click to expand...
Click to collapse
Let me reprhrase the question:
Can I user your kernel to make /system writable AND the DRM patch or not?
Thank you
sgiannouris said:
Let me reprhrase the question:
Can I user your kernel to make /system writable AND the DRM patch or not?
Thank you
Click to expand...
Click to collapse
yes u can, but then you should to flash stock kernel via flashtool or you will get endless black screen
So, that's a no for the time being.
Thanks for you work
Great work, thanks!
---------- Post added at 07:08 PM ---------- Previous post was at 07:05 PM ----------
does this mean that now we can finally flash xposed framework and wont get bootloop?
im gonna try anyways. thanks tho, even if it doesnt fix xposed.
kjames2001 said:
Great work, thanks!
---------- Post added at 07:08 PM ---------- Previous post was at 07:05 PM ----------
does this mean that now we can finally flash xposed framework and wont get bootloop?
im gonna try anyways. thanks tho, even if it doesnt fix xposed.
Click to expand...
Click to collapse
yes
@ Desperanto86
At first thanks a lot for sharing your kernel!
About Xposed: Does it really work on your device, and what modules have you already installed? I tried XPrivacy, but ended in a bootloop, even with the unsupported 3.6.8-version...
Desperanto86 said:
yes
Click to expand...
Click to collapse
did you try reboot again? cause i still get bootloop!
kjames2001 said:
did you try reboot again? cause i still get bootloop!
Click to expand...
Click to collapse
reboted 100 times. all works fine
Klaus N. said:
@ Desperanto86
At first thanks a lot for sharing your kernel!
About Xposed: Does it really work on your device, and what modules have you already installed? I tried XPrivacy, but ended in a bootloop, even with the unsupported 3.6.8-version...
Click to expand...
Click to collapse
I use GravityBox it realy works. There are some bugs, like invisible right button, but almost all work
what version of xposed framework are u using? im using alpha 2, maybe there's alpha 3 out?

Ultimate Q {ROM} Now S10+ Port

Ultimate Q is based off stock firmware heavily deboalted Camera has been redone lots of tweaks
Rom Download Q https://drive.google.com/file/d/18eZBMUqn5NN4luBBqYBVTQ4VfaTe16uv/view?usp=sharing Lastest this one is latest non s10 port
These are s10 port and have magisk 20.4 in it
S10 Port Download https://www.androidfilehost.com/?fid=4349826312261810938
Mirror Download https://mega.nz/file/dFESGAwA#BfTv9AW2sqI8VMHn2IwgARxX732f2zMDtMJvLvyVx2Y
Kernel source https://github.com/carlos-burelo/Quantum_Kernel_Q_A205X
Version Ultimate Q S10+ Port with Minhiker Kernel Download no higher then 19.3 magisk witch is in it https://www.androidfilehost.com/?fid=4349826312261812147
Install Method
Step one You must have android 10 upgrade via odin
Step two install new twrp https://drive.google.com/file/d/1uFIKqb2gxiT43WWzqsrICnTtiNMkSnjZ/view?usp=sharing and then mount everything format then install Forceencrypt https://drive.google.com/file/d/1adaZiJaAAoh3Y2u_QDhWjbMvrppCmYB5/view?usp=sharing
Step Three Install rom https://drive.google.com/file/d/1_aZdeB9iEerXYgkCaLp_XSBvupKfGagf/view?usp=sharing
Step Four if you want kernel install https://drive.google.com/file/d/1Fq3lcAtFGZ_MrMaPbGHBXBVR7BKg8afq/view?usp=sharing
Step Five install magisk 19.3 https://drive.google.com/file/d/1AFM53-8Phz3cABfGUfzhNTTui8XT-DQq/view?usp=sharing
Step Six Reboot and enjoy
Skip step Four and Five if you dont want kernel
Dm Forceencrypt only if you your just upgrading twrp to 10 first time
Kernel source https://github.com/minhker98/android_kernel_samsung_a205f
kernel credits @minhka98
Telegram https://t.me/ultimate_Pie2
change log
Change log
VQ
kernel added to rom some tweaks to system better battery
v VQ
some more system tweaks hdr camera with sports mode added
V vQ1
pro video mode added to camera and a bunch of bug fixes like battery useage wont crash anymore
V Ultimate Q S10+ Quantum
added bixby vision
link to windows
quick share
camera mods sports mode, pro video, night pictures
more mods and Quantum kernel added thanks to @carlosburelo
reserved
reserved 2
Installing Ultimate Q
1. Download Ultimate Q
2. Reboot into TWRP and backup boot, data, system.
3. Wipe both caches, data and system.
4. Install Ultimate Q (Minh's kernel is built in)
5. Reboot.
6. Run through a new install
Don't upgrade Magisk
MTP works
TWRP backup and restore works well
/system is read/write so you can add and remove apps as you want.
The kernel allows overclocking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing a GSI with Minh's kernel
1. Install Ultimate Q
2. Reboot into TWRP
3. Wipe both caches, data & system
4. Install an android 10 GSI such as Crdroid
5. Flash Magisk 19.3
6. Reboot
Don't upgrade Magisk
Installing Stock Rom with Minh's kernel
Firstly extract system.img from the ap section of downloaded firmware.
1. Install Ultimate Q
2. Reboot into TWRP
3. Wipe both caches, data & system
4. Install system.img
5. Flash Magisk 19.3
6. Reboot
7. Wait a long time
Don't upgrade Magisk
Installing Minh's kernel v 14.5
1. Download from here
https://drive.google.com/file/d/1qGNOwxXupNCUDkBnZ79OdHugKfVdg4xB/view
2. Install from TWRP (I had Ultimate Q installed and didn't wipe anything before I installed 14.5)
3. Install Magisk 19.3
4. Reboot
Don't upgrade Magisk
Thank you sir
Can be work on A205f with out any problem ?
Abdualrhman sihan said:
Can be work on A205f with out any problem ?
Click to expand...
Click to collapse
yes if you follow the steps above
A205F had Q already
https://samfrew.com/download/Galaxy__A20__/kmhh/XXV/A205FXXU7BTD3/A205FOLM7BTD3/
thatha said:
A205F had Q already
https://samfrew.com/download/Galaxy__A20__/kmhh/XXV/A205FXXU7BTD3/A205FOLM7BTD3/
Click to expand...
Click to collapse
must of just released it today
I wonder What happens if we OTA upgrade ?? Technically speaking
Maybeyou said:
I wonder What happens if we OTA upgrade ?? Technically speaking
Click to expand...
Click to collapse
Shouldn't be any different.
shumway66 said:
reserved
Click to expand...
Click to collapse
If i install android Q via odin or with your rom.can i go back to the stock P rom ? I have s6 update
And witch is better Q or P for a20?
hooooossamq said:
If i install android Q via odin or with your rom.can i go back to the stock P rom ? I have s6 update
Click to expand...
Click to collapse
Before you install Ultimate Q you must upgrade to Android Q.
After that you can't go back to Pie
hooooossamq said:
And witch is better Q or P for a20?
Click to expand...
Click to collapse
Q i think is better iam uploading finished version of Q now so be on here shortly
shumway66 said:
Q i think is better iam uploading finished version of Q now so be on here shortly
Click to expand...
Click to collapse
And is it can be rooted? The Q i mean
hooooossamq said:
And is it can be rooted? The Q i mean
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-a20/how-to/guide-quick-root-twrp-galaxy-a20-t4069423
Screenshots?
shumway66 said:
Ultimate Q is based off stock firmware heavily deboalted Camera has been redone lots of tweaks
Rom has Magisk 20.4 just to patch ramdisk
Rom Download
Install Method
Step one You must have android 10 upgrade via odin
Step two install new twrp https://drive.google.com/file/d/1uFIKqb2gxiT43WWzqsrICnTtiNMkSnjZ/view?usp=sharing and then mount everything format then install Forceencrypt https://drive.google.com/file/d/1adaZiJaAAoh3Y2u_QDhWjbMvrppCmYB5/view?usp=sharing
Step Three Install rom https://drive.google.com/file/d/1_aZdeB9iEerXYgkCaLp_XSBvupKfGagf/view?usp=sharing
Step Four if you want kernel install https://drive.google.com/file/d/1Fq3lcAtFGZ_MrMaPbGHBXBVR7BKg8afq/view?usp=sharing
Step Five install magisk 19.3 https://drive.google.com/file/d/1AFM53-8Phz3cABfGUfzhNTTui8XT-DQq/view?usp=sharing
Step Six Reboot and enjoy
Skip step Four and Five if you dont want kernel
If you have a205f you can get Firmware here https://samfrew.com/download/Galaxy__A20__/kmhh/XXV/A205FXXU7BTD3/A205FOLM7BTD3/
Kernel source https://github.com/minhker98/android_kernel_samsung_a205f
kernel credits @minhka98
Telegram https://t.me/ultimate_Pie2
Click to expand...
Click to collapse
Screenshot?
physwizz said:
.....
After that you can't go back to Pie
Click to expand...
Click to collapse
See this https://support.halabtech.com/index.php?a=downloads&b=file&id=258895
.what you think..
---------- Post added at 07:38 PM ---------- Previous post was at 06:46 PM ----------
If any one try android Q on a20 tell us if the performance better than android P ? And what abut battery backup?
hooooossamq said:
See this https://support.halabtech.com/index.php?a=downloads&b=file&id=258895
.what you think..
---------- Post added at 07:38 PM ---------- Previous post was at 06:46 PM ----------
If any one try android Q on a20 tell us if the performance better than android P ? And what abut battery backup?
Click to expand...
Click to collapse
I'll let you know

Categories

Resources