Related
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
cdanford said:
I'm trying to flash my GNote and have a custom recovery. However when I try to flash a custom rom, CM10 in particular, I get an error that says Status 7. I have searched here and google and cannot find a fix or explanation of what is wrong. Any takers? Thanks for the help. :good:
Click to expand...
Click to collapse
Update to the lastest cwm or use twrp. I recommend twrp.
just_visiting said:
Update to the lastest cwm or use twrp. I recommend twrp.
Click to expand...
Click to collapse
What version of twrp do you have?
cdanford said:
What version of twrp do you have?
Click to expand...
Click to collapse
Version 2.3.1.1
The link is in the Original Android Development forum.
http://forum.xda-developers.com/showthread.php?t=1647575
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Got it working just fine. THanks for the support guys!
cdanford said:
Got it working just fine. THanks for the support guys!
Click to expand...
Click to collapse
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
derArzt12 said:
Mind sharing how? I'm on the latest TWRP and CWM, and both cause a bootloop no matter what I do.
Click to expand...
Click to collapse
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
joe3681 said:
He had an error. Not a bootloop. You're doing something wrong.
Sent from my GT-N7005 using xda premium
Click to expand...
Click to collapse
cdanford said:
I got TWRP installed and flashed CM10 but it is stuck in the boot screen. I wiped cache, dalvik, and factory settings and flashing again. Any idea?
Click to expand...
Click to collapse
I have the same error, which causes a bootloop. And in his comment it says he's stuck in one.
status 7 error message:radio
kindly check your radio base band and update xxlf1 using thread and try the update again
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
andreyus said:
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
Click to expand...
Click to collapse
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
andreyus said:
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
Click to expand...
Click to collapse
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
tallman43 said:
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
Click to expand...
Click to collapse
ive tried that for lots of times , so now im using this cm10.2 its working fine but i want to try a custom rom
anyway thanks for help mate
The recovery version must be the culprit. Why dont you install twrp from playstore? There's an app called TWTP manager. After installing twrp dont let the app reboot for you. Reboot it first then reboot into recovery the second time. Then try to install another rom
Sent from my SM-N910T using XDA Free mobile app
I rooted my 925f edge on 6.0.1 my question is how do I install twrp now ?
http://forum.xda-developers.com/gal...25f-android-marshmallow-6-0-1-rooted-t3301458
What is this ? I don't understand anything..
thanks Uergh
we need this tuto to activate twrp
Has anyone tired something like this already?
http://www.aryktech.com/2016/03/how-to-flash-twrp-v3-on-s6-s6-edge.html
does not work on s6 edge 6.0.1, hangs on reboot
Bladeage said:
Has anyone tired something like this already?
http://www.aryktech.com/2016/03/how-to-flash-twrp-v3-on-s6-s6-edge.html
Click to expand...
Click to collapse
Any1 tried this method?
I rooted my 925f edge on 6.0.1 my question is how do I install twrp now ?
Click to expand...
Click to collapse
This is the TWRP that are present right now who works for the 6.0.1 at the moment... you can try if you like.. but i use it on my 6edge and don't encounter any problem so far..
Warrenforfree said:
This is the TWRP that are present right now who works for the 6.0.1 at the moment... you can try if you like.. but i use it on my 6edge and don't encounter any problem so far..
Click to expand...
Click to collapse
How do you flash it ? Using odin or flashify?
Flash it with odin,no problems for me too
vegerfrancois said:
Flash it with odin,no problems for me too
Click to expand...
Click to collapse
I have to put it In AP right ? Also wich one is the right file for my sm g925f ?
Sorry for being so noob really long time without a Samsung device
Diaze said:
I have to put it In AP right ? Also wich one is the right file for my sm g925f ?
Sorry for being so noob really long time without a Samsung device
Click to expand...
Click to collapse
Put the twrp 3.0.0.0.tar through AP in odin.. the zip. is for flashing through recovery.. since you don't have this recovery, odin is your first step..
Ok. Thank you. I successfully flashed twrp.
Is there a working xposed for 6.0.1 ?
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Any one?
Akhil137 said:
Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Click to expand...
Click to collapse
Please try, there was also a thought to install, because the standard firmware is terrible
Akhil137 said:
Hi guys I am trying to install Android 12 in M40 and wipe everything of Samsung. Any suggestions?
Click to expand...
Click to collapse
Have you tried installing any GSI firmware based on Android 11 other than PHH's GSI?
deadinside322 said:
Have you tried installing any GSI firmware based on Android 11 other than PHH's GSI?
Click to expand...
Click to collapse
Trying to install GSI but CMD stuck at waiting for device at the android recovery>install through ADB. Not sure y it's keep on happening.
Also used to sideload command but getting unauthorised signature like something.
Any help?
@Akhil137 Hey, have you managed to port TWRP or any custom recovery for our Galaxy M40 with Android 11?
rohitrss said:
@Akhil137 Hey, have you managed to port TWRP or any custom recovery for our Galaxy M40 with Android 11?
Click to expand...
Click to collapse
No, I don't find any way to install recovery to m40
Hey we got first TWRP recovery, please verify if its working for you [Recovery] TWRP for Samsung M40 (SM-M405F)
rohitrss said:
Hey we got first TWRP recovery, please verify if its working for you [Recovery] TWRP for Samsung M40 (SM-M405F)
Click to expand...
Click to collapse
tried it using Odin but not working, stuck on file analysis.
Akhil137 said:
tried it using Odin but not working, stuck on file analysis.
Click to expand...
Click to collapse
Replied you in the same thread.