when i install cyangenMod 13 it freeze at:
Patching system image unconditionally
i use twrp 3
--------------------
cyangenMod 12
same problem
-------------
only cyangenMod 11
works
Did you have the original Kit Kat firmware before you tried the newer CM roms? If you started upgrading from Jelly Bean, then that's why.
i use odin to install official 4.4 rom
then install twrp
but still same problem
thank you
@prowm
What I would suggest you is to use CWM Recovery. Also be sure to do a full wipe before, where I don't think that this was the problem here
Or TWRP 2.8 as the older version hadn't any issues with any rom (for me at least ))))
TimurAlaskara_TR said:
@prowm
What I would suggest you is to use CWM Recovery. Also be sure to do a full wipe before, where I don't think that this was the problem here
Or TWRP 2.8 as the older version hadn't any issues with any rom (for me at least ))))
Click to expand...
Click to collapse
Previously I did not have any problem used cyangenmod 12 and 13
But now I do not know the problem occurred caused
Experimented twrp 2.8 and twrp 3
i do full wipe davlik cashe and data , system
but still same problem
thank you for your reply
prowm said:
Previously I did not have any problem used cyangenmod 12 and 13
But now I do not know the problem occurred caused
Experimented twrp 2.8 and twrp 3
i do full wipe davlik cashe and data , system
but still same problem
thank you for your reply
Click to expand...
Click to collapse
Try cwm anyway a completely different recovery may prevent that issue
TimurAlaskara_TR said:
Try cwm anyway a completely different recovery may prevent that issue
Click to expand...
Click to collapse
test cwm but same issue
Please link to the recovery and rom you're trying to use.
es0tericcha0s said:
Please link to the recovery and rom you're trying to use.
Click to expand...
Click to collapse
when updating partition details
faild to mount system/ ( invalid argument )
i test many roms
cm13
http://forum.xda-developers.com/gal...m-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
recovery
http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535
roms ok :
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
Based On: TouchWiz
http://forum.xda-developers.com/galaxy-grand-2/development/rom-motion-rom-ll-t3295055
and
http://forum.xda-developers.com/galaxy-grand-2/development/rom-adityarom-v3-0-t3387388
and
cm11
http://forum.xda-developers.com/gal...lopment/alpha-cm-11-0-galaxy-grand-2-t2972750
Did you wipe system when switching roms? Also, you can try mounting system in TWRP / mount
es0tericcha0s said:
Did you wipe system when switching roms? Also, you can try mounting system in TWRP / mount
Click to expand...
Click to collapse
i wipe system and data
problem solved
i install first cyangenmod 13 then install newer
thanks for all
Related
Hey guys i recently posted a question about whether my i9300t would be able to safely run cyanogenmod 11, the answers i received said that i would not have a problem, i had already flashed the S4 revolution rom successfully, aswell as cyanogenmod 10.2, but when attempting to flash CM11 and AOKP (4.4.2) it just came up with a red 'FAILED!' sign for both of them.. im using the latest TWRP
Any ideas? much appreciated, thanks Guys
smiley118118 said:
Hey guys i recently posted a question about whether my i9300t would be able to safely run cyanogenmod 11, the answers i received said that i would not have a problem, i had already flashed the S4 revolution rom successfully, aswell as cyanogenmod 10.2, but when attempting to flash CM11 and AOKP (4.4.2) it just came up with a red 'FAILED!' sign for both of them.. im using the latest TWRP
Any ideas? much appreciated, thanks Guys
Click to expand...
Click to collapse
not sure if it is also valid for CM, but most rom devs recommend not to use TWRP for flashing a 4.4 rom. Maybe try Philz?
Format System, data, preload and sd card (internal memory) while on TWRP, aswell factory reset wipe all data and dalvik cache and then flash those ROMs
ShltHappens said:
Format System, data, preload and sd card (internal memory) while on TWRP, aswell factory reset wipe all data and dalvik cache and then flash those ROMs
Click to expand...
Click to collapse
yeah i did everything the way youre supposed to.. it just comes up with some error..
will it be safe for me to simply flash the clockworkmod .zip file in TWRP?? will it simply just replace it?
smiley118118 said:
will it be safe for me to simply flash the clockworkmod .zip file in TWRP?? will it simply just replace it?
Click to expand...
Click to collapse
If you want to switch to a cwm based try philz. You can flash it in recovery and simply reboot recovery
Sent from my Nexus 7 (2013)
Hello,
I am contacting for help to install a rom on my tablet Samsung Tab 10.1 GT-P7500 (3G), problems come when I install a newer version of TWRP 2.8.0 in this case, it does not detect the files (roms and gapps ) on the Sdcard for installation.
But if i install an older version of TWRP 2.2 or CWM 6.0.3.6 the files (Rom and gapps) are available for installation.
How can I solve this problem and install the OMNI 4.4.4 version on my tablet?
Many thanks for the help.
JC
Ritintin said:
Hello,
I am contacting for help to install a rom on my tablet Samsung Tab 10.1 GT-P7500 (3G), problems come when I install a newer version of TWRP 2.8.0 in this case, it does not detect the files (roms and gapps ) on the Sdcard for installation.
But if i install an older version of TWRP 2.2 or CWM 6.0.3.6 the files (Rom and gapps) are available for installation.
How can I solve this problem and install the OMNI 4.4.4 version on my tablet?
Many thanks for the help.
JC
Click to expand...
Click to collapse
What is your current bootloader… ( Ics or Gin)
What twrp 2.8 are you using.. ( give me a link)
I use twrp 2.7. I can supply you a link if you wish.
Gil81 said:
What is your current bootloader… ( Ics or Gin)
What twrp 2.8 are you using.. ( give me a link)
I use twrp 2.7. I can supply you a link if you wish.
Click to expand...
Click to collapse
---------------------------------------------------------
hello,
Thanks for your help.
My current bootloader its ICS (http://droidbasement.com/db-blog/?p=3158)
the TWRP 2.8.0.0 i get from this page http://forum.xda-developers.com/showthread.php?t=2777161 (it's the 3g version)
Please give me the link for the 2.7.
Best regards
JC
Ritintin said:
---------------------------------------------------------
hello,
Thanks for your help.
My current bootloader its ICS (http://droidbasement.com/db-blog/?p=3158)
the TWRP 2.8.0.0 i get from this page http://forum.xda-developers.com/showthread.php?t=2777161 (it's the 3g version)
Please give me the link for the 2.7.
Best regards
JC
Click to expand...
Click to collapse
Use this Link.
Scroll down the page until you see the slim recovery section… pick p4 for your 3g tab and flash in recovery.
Wipe cache and dalvik cache… flash twrp zip...go to advanced and pick reboot recovery. Let it boot to new twrp and then reboot system.
After that you can go ahead with your clean install of any rom you want… ( wipe data, cache, dalvik & format system) clean install.
Gil81 said:
Use this Link.
Scroll down the page until you see the slim recovery section… pick p4 for your 3g tab and flash in recovery.
Wipe cache and dalvik cache… flash twrp zip...go to advanced and pick reboot recovery. Let it boot to new twrp and then reboot system.
After that you can go ahead with your clean install of any rom you want… ( wipe data, cache, dalvik & format system) clean install.
Click to expand...
Click to collapse
Hello,
I make like you told me, but problem stay the same and i tried with TWRP 2.7.1.0.
I don't know what to do.
Thanks
JC
Ritintin said:
Hello,
I make like you told me, but problem stay the same and i tried with TWRP 2.7.1.0.
I don't know what to do.
Thanks
JC
Click to expand...
Click to collapse
make sure the sdcard is mounted in twrp..
also...are u looking in the right spot for files..tell me what your directory tree says when you are in the download section
TWRP 2.8 should work on the p7500. I have it on the p7500 from Saudi Arabia and used it to flash nameless, infamous, and omni.
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
yrragarry said:
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
Click to expand...
Click to collapse
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
wulsic said:
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
Click to expand...
Click to collapse
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
Is it corrupt maybe?
Did you downloaded cyanogenmod for the right device?(Probably you have but just in case)
Are you really using the latest recovery?
Better way, what error does it shows, why does it aborts.
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
YOu need to first install Kitkat compatible cwm recovery to install kitkat rom in i9100 .. So first download i9100kitkat compatable recovery (google the same to find it) flash it via odin or normal and reboot recovery now .. Now you can full wipe, wipe cache data partitions format system and flash the laest cm11 + gapps with out any problems
Hi,
i updated my S2 from CM 12 to CM 13.
This works perfectly.
But i cant install the gapps.
It say's not enough Space in System.
So CM install's his own Recovery: Cyanogen Recovery.
But with this i can't wipe also the /system.
So how can i wipe this now?
Greets
xtreme10 said:
Hi,
i updated my S2 from CM 12 to CM 13.
This works perfectly.
But i cant install the gapps.
It say's not enough Space in System.
So CM install's his own Recovery: Cyanogen Recovery.
But with this i can't wipe also the /system.
So how can i wipe this now?
Greets
Click to expand...
Click to collapse
Hi,
Here is for your reference:
Boot your phone into download mode. Connect your phone to PC. Use ODIN to flash TWRP .tar kernel onto your phone, go into recovery, wipe>advanced, wipe system.
However, I believe the real problem you are facing is your system partition is too small. Use my increase system partition size guide to increase system partition.
gsstudios
Thanks for your Answer.
But where can i download the newest TWRP Version for the S2?
Sorry.
xtreme10 said:
Thanks for your Answer.
But where can i download the newest TWRP Version for the S2?
Sorry.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57974756&postcount=4
CM12.1 TWRP is the one you want. Either one is fine, the older tar is what I usually recommend. Since you didn't keep isorec recovery, you can't flash Isorec TWRP this way. You will need to reflash ROM to get back to CM13.
gsstudios
Hi,
My problem is that I can not install any gapps on my GT-I9300 I have fleshed it with many different version of custom ROM, using android 7, 7.1, 6 and 5.1. Unfortunately regardless of the version of the gapps (nano or stock) installation ends up with error that google apps stopped working. The gaps version is correct for given android version. When I flash ROM only - no gapps - the phone usually works fine but only on Android v5.
When I try ver 6 ROM flash does not even start. With ver 5.1 it flashes but then get some apps error.
Any suggestions or idea? What can goes wrong? Where to start troubleshooting ? On the stock firmware the phone was working fine.
Thx for help
Did you clean flash it, like proper format data. And what rom are you using?
Sly Fox007 said:
Did you clean flash it, like proper format data. And what rom are you using?
Click to expand...
Click to collapse
I tried at least 7 different ROMs. Before I flash, I run wipe data/factory reset then cache partition and dalvik cache at the end.
valuss said:
I tried at least 7 different ROMs. Before I flash, I run wipe data/factory reset then cache partition and dalvik cache at the end.
Click to expand...
Click to collapse
I'll ask you again, did you format data which in the the advance wipe section. And also what version TWRP and opengapps are you using?
Sly Fox007 said:
I'll ask you again, did you format data which in the the advance wipe section. And also what version TWRP and opengapps are you using?
Click to expand...
Click to collapse
Sly Fox007. Now I'm not sure if I format the data correctly. I use ClockwordMod Recovery v6.0.1.2 not TWRP. Is this a possible source of my problem?
valuss said:
Sly Fox007. Now I'm not sure if I format the data correctly. I use ClockwordMod Recovery v6.0.1.2 not TWRP. Is this a possible source of my problem?
Click to expand...
Click to collapse
Sly Fox007 - you directed me towards the solution. I have installed TWRP and installed all with no issues!
Thx.