I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Look for @Hopper8 thread. Great thread lots of info on Odin problems
No Luck!
andrewwright said:
Look for @Hopper8 thread. Great thread lots of info on Odin problems
Click to expand...
Click to collapse
Hi,
I read through and tried flashing with siyah v6 but even that failed.
Not really sure what the issue is!
mosesadarsh said:
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Click to expand...
Click to collapse
Doesnt seem like the phone is charging either!!
Flash philz kernel and then you should be able to get to recovery then flash a custom Rom
Read this bro
http://forum.xda-developers.com/showthread.php?t=2101610&page=2
Hope it helps !!
I tried everything possible but nothing worked. . I got stuck at factoryffs every time then hit xmit data failure. . M sure I hard bricked it now! ! Must be the motherboard. .
can someone please post links to the philz kernel and a stable india version JB firmware !! Please please ... im desperate!!
Search!! Dont be lazy its not hidden or hard to find.
seriously bro?? I found the thread to that kernel but that list is never ending.. God knows which kernel is for my phone!!
Only comment if you have answers please !!!!
All the videos that i watched online show how to install philz kernel on a working phone.
My phone is kinda dead... so what needs to be done after flashing philz kernel? Tell me the next steps please..
Does it still go to download mode? Does odin still see it?
I tried flashing my phone with philz kernel but even that failed...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSK-ODD-4.92.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<OSM> All threads completed. (succeed 0 / failed 1)
Make is easy on your self and flash lss firmwear and flash lss kernel "near the top of download list" chances are you dont have an os now odin has failed to flash. Hooper8 thread has good info on flashing problems! Read that before you try.
Pics clicked a minute back... does this help...
Pls read hooper8 thrsad
Any joy now op?
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
mosesadarsh said:
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
Click to expand...
Click to collapse
Same problem here, my phone was working fine then all of a sudden i noticed it was dead, tried rebooting it, nothing happened, boot loop, tried to access CWM, i got the lower section menu of CWM but nothing else, a black screen with the buttons.
So next i said, let me use odin to flash a new kernel. That failed and ever since that failed, i cannot do anything except enter download mode. If i power the phone on, i get a [phone-problem-computer] image in yellow with text that says somehting like problem loading software, please conntect to kies recovery mode. of course that never works.
And everytime i try to flash absolutely anything on this device, Odin DOES see the device, and the second i press flash/start, when it reacher nand write start, it hangs there, stuck doing nothing.
I took the phone to a friend who has an Riff jtag box, he soldered his jtag to the phone and said the memory chip is not dead, i can read its capacity normally. But when he tried to write to it, it did not work, kept giving him errors, he said he has never encountered such a behavior before. And then i had to leave.
Up to now, my phone is still dead and i have no idea what to do. It only enters download mode, but at the same time, this is useless since flashing anything simply does not work. Anyone knows what the reason could be?
FYI, i was on NeatROM 5.5, which comes with Philz Kernel.
NAND is stuffed/corrupted. How/why - who knows ? Motherboard replacement if you've already tried JTAG. Could be something hardware going on that caused the chip to become 'damaged'.
Hello, Thanks for taking the time out to read my post
Sorry if i sound a little noobish. Bear with me. I've been at this for days and its disappointing because i just bought the phone a few days ago.
I Soft Bricked My Galaxy s3 from Boost Mobile, Long story short I had gotten it rooted and i was trying to fix the native wifi-tethering, But when i flashed the file it soft bricked.
After that, I tried flashing my original file to Bring my phone back to life, but I had an error in Philz Recovery.
It seems like its not reading my phones memory or something. I can only access files from my sd card.
So i tried flashing a rom in Philz and it actually seemed to work until turned out to be for the sprint model of the S3, Even though the top of the post where i got it from It said: for Boost Mobile -_-
Because after i flashed it my phone was still soft bricked, But instead of showing the boost mobile boot, Now its showing Sprint!!!
Since then, I've tried flashing different .tar files for my phone with odin but everytime I get a FAIL.
Here's what the log looks like if that helps
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCND8_L710SPRCND8_L710VPUCND8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also there's an error message on my phone
SECURE CHECK FAIL : aboot
Not sure If i should be trying to flash The Boost Mobile .tar file or the Sprint one now?[since my boot screen changed] I just want it to be back on boost mobile.
I think I found the right .tar for my phone on the boost mobile model but I just cant get it to work. =[
Sorry if it was a long post i just wanted to make sure whoever wanted to help had all the details.
ANY help will be appreciated! Thanks In Advance!!!!!
Try posting in the right forum, this is for the i9300 only.
Well from what i know and we all know Samsung has told us that we will recieve lollipop in May. After that,1month +.And so on. We're almost in september and no lollipop update. On their site it says it's delayed. I don't know why because GpVE recieved lollipop in all countries so it's not a problem. I at least hope that they cancel it and i can be sure having no regrets rooting the phone and flashing a rom. Please post any news you find. Thanks a lot
Exactly my thoughts... :good:
Its coming
chauhanjayc said:
Its coming
Click to expand...
Click to collapse
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
mrllokman said:
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
Click to expand...
Click to collapse
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
chauhanjayc said:
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
Click to expand...
Click to collapse
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Flamestorm said:
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Click to expand...
Click to collapse
hi friends
trying to flash Russian firmware
getting below error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1BOH3_G530HSER1BOH3_G530HXCU1BOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the device there is red taxt callled security check fail:about
any help would be appreciated
So I have this message on the screen "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I have tried installing alot of new firmware, but it doesn't help. Everytime I'm installing a new firmware it just goes to <ID:0/003> factoryfs.img
<ID:0/003> FAIL!
Someone please help me fix my phone?
LOG:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
gsstudios said:
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
Click to expand...
Click to collapse
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Sun90 said:
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Click to expand...
Click to collapse
I have tried using that version, and I have tried using the latest version of odin.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Have you followed this guide before posting on XDA: http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Regards, gsstudios
I did try that guide, and I got past the usual factoryfs.img but my phones battery discharged, and when I charged it, I still get FAIL at factoryfs.img
Hello guys. I just made a new account for this problem. I will really really appreciate if u guys help me out, because my parents are gonna kill me if they find out my phone has a fault. So here it is.
A few weeks back i rooted my phone but then snapchat stopped working because of its new policy or something and i decided to unroot the phone. In an act of stupidity i unrooted the phone through SuperSU complete unroot and ignored all the warnings. I know im an idiot (Please help me out folks) Then my phone got stuck on bootloop. I searched it up and found solutions through ODIN and all. So thats what i did. I dowloaded the drivers and downloaded odin. Ran my phone in the downloading mode. Btw i did delete the cache through recovery mode and have already reset it as well through their and nothing happened. So back to the ODIN. I downloaded the firmware, stock one. The problem is i dont know which on to download. Thus far i have downloaded two which are, G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 and G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5. As seen in the tutorial, i put the phone in download mode and ran odin. There at first the <ID:0/008> Added!!
was shown as soon as i connected. But when i added the PDA file, it didnt detect it and remained the same at 008. So i went ahead with the start and this is what it says,
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU5EPK5_G920TTMB5EPK5_G920TUVU5EPK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This was the case for both the stock firmwares. PLEASE SOMEONE HELP ME OUT. I cant let my folks find out. Can any of u answer this as quickly as possible? PLEASE! IT'D be a huge help.