Well from what i know and we all know Samsung has told us that we will recieve lollipop in May. After that,1month +.And so on. We're almost in september and no lollipop update. On their site it says it's delayed. I don't know why because GpVE recieved lollipop in all countries so it's not a problem. I at least hope that they cancel it and i can be sure having no regrets rooting the phone and flashing a rom. Please post any news you find. Thanks a lot
Exactly my thoughts... :good:
Its coming
chauhanjayc said:
Its coming
Click to expand...
Click to collapse
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
mrllokman said:
I already installed Android Lollipop on my Galaxy Grand Prime (SM-G530H)
Click to expand...
Click to collapse
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
chauhanjayc said:
hi all
i am from india and had SM-G530H now when i try to flash G530HXXU2AOC1_G530HTCE2AOC2_TCE (5.0 from Russia) the odian at the end says failed
since i am new to samsung any help would be solace
Click to expand...
Click to collapse
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Flamestorm said:
You are doing something wrong the baseband is nothing you can flash every firmware if only is avaiable for that model G530H
Click to expand...
Click to collapse
hi friends
trying to flash Russian firmware
getting below error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1BOH3_G530HSER1BOH3_G530HXCU1BOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the device there is red taxt callled security check fail:about
any help would be appreciated
Related
hi fourm i need your help please
when i'm trying to update my galaxy s2 gt-i9100g to the new ice cream sandwich rom 4.0.4 via odin i get this threat
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCLPF_I9100GZCLPE_I9100GOZHLPF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is the rong please
omarrasheed said:
hi fourm i need your help please
when i'm trying to update my galaxy s2 gt-i9100g to the new ice cream sandwich rom 4.0.4 via odin i get this threat
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCLPF_I9100GZCLPE_I9100GOZHLPF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what is the rong please
Click to expand...
Click to collapse
Try these steps buddy
Link: http://www.theandroidsoul.com/i9100...-update-for-i9100g-galaxy-s2-finally-arrives/
Chinese firmwares don't work ob non-chinese devices. Try to flash the firmeware matching your country code.
Gesendet von meinem GT-I9100G mit Tapatalk 2
rcade2005 said:
Try these steps buddy
Link: http://www.theandroidsoul.com/i9100...-update-for-i9100g-galaxy-s2-finally-arrives/
Click to expand...
Click to collapse
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
GoZoU1 said:
Chinese firmwares don't work ob non-chinese devices. Try to flash the firmeware matching your country code.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
thank you very much man
i hope we will get one for us!
thank you again:good:
omarrasheed said:
thank you very much man
i hope we will get one for us!
thank you again:good:
Click to expand...
Click to collapse
NOW UPDATE ICS 4.0.4 :laugh:
GT-I9100G - China
PDA: I9100GZCLPF
CSC: I9100GOZHLPF
Version: 4.0.4
Date: 2012-06-29
sammobile.com/firmware/?page=8&view=5250
omarrasheed said:
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
Click to expand...
Click to collapse
if you are Chinese user use kies first
if you are non Chinese user no doubt this kernel wont work because its slightly different model
omarrasheed said:
i'm doing all the step in this link
and i'm on ice 4.0.3 i want to update to 4.0.4 it's coming for china in sammobile
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=-1#modelsa
Click to expand...
Click to collapse
I don know which country u belong to but if u r from China the update usin Kies. If u have the international I9100G the install ROM's like CM9 or AOKP or ParanoidAndroid or RootBox. Those ROMs come with ICS 4.0.4
Thread moved
Questions never belong in Development.
4.0.4 is released only for chinese handsets
and if u have an internation i9100g then it wont work it will just end up in a soft brick
and u will have to flash the stock rom again
Hi,
I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it.
I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!!
Every time i want to flash with Odin it fails in the beginning of the process, see below:
Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason.
Any help what is going wrong or what i should try to do?
Thanks a lot far any help.
Dave
Even it is a generic question you might get an answer if you post it in the correct forum.
You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000.
davaze said:
Hi,
I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it.
I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!!
Every time i want to flash with Odin it fails in the beginning of the process, see below:
Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason.
Any help what is going wrong or what i should try to do?
Thanks a lot far any help.
Dave
Click to expand...
Click to collapse
BeeGee_Tokyo said:
Even it is a generic question you might get an answer if you post it in the correct forum.
You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000.
Click to expand...
Click to collapse
Ooops, sorry my mistake! Moved it already.
Thanks.
Hello I have a Galaxy s6 edge from videotron SM-G925W8 I've try to rooted it today , but now I'm cought in a bootloop , I've try to flash it back with the original Videotron firmware but Odin give me this error at the beggening
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know what should be my next step ?
imanu said:
Hello I have a Galaxy s6 edge from videotron SM-G925W8 I've try to rooted it today , but now I'm cought in a bootloop , I've try to flash it back with the original Videotron firmware but Odin give me this error at the beggening
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know what should be my next step ?
Click to expand...
Click to collapse
Did you try wiping the cache partition?
Snowby123 said:
Did you try wiping the cache partition?
Click to expand...
Click to collapse
yes and its not working
http://forum.xda-developers.com/galaxy-s6-edge/help/5-1-1-manual-update-stuck-g925f-t3173112
This thread describes a similar issue.
The user tried flashing the stock firmware through Odin; it bricked the phone.
If you read through it you will see how the issue was resolved.
Thanks , but its for G925F version ? what do I need to do since its not the same version?
Now that is another conundrum I wasn't prepared for. I know that half of the tutorial on that thread is compatible with your phone; half is exclusive to G925F.
---------- Post added 13th August 2015 at 12:06 AM ---------- Previous post was 12th August 2015 at 11:50 PM ----------
I found another thread that explains how to troubleshoot a failed Odin attempt.
It is written for the Galaxy S2, but sounds generalized for all Samsung Galaxies.
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If you have access to download mode, you're ok but in order to reduce to a minimum the things that might go wrong, you should:
1- Use odin 3.10.6
2- verify the integrity of the firmware downloaded on sammobile. It should be roughly 3,402,561 kb in size
3- make sure you have Samsung Android drivers installed
4- If all above fails, switch USB cable, and then USB port
If you still have an issue, try downloading the odin flashable TWRP and try to flash it, if it passes, try wiping everything on the phone in TWRP and try the process again
As a last resort, you can try to see if KIES emergency firmware installation will work. If after doing all this you're not back up and running, you're screwed but i doubt you will have failed all of the above.
at first.. you need a custom kernel to root 5.1.1 because of the new system write protection..the second i think you are on reactivation look..look in my twrp thread for more
You got error on sboot.bin due to your flashing bootloader version lower than your device bootloader try to get the latest firmware or flash a custom firmware
If you need further assistance contact me via pm
Sent from my SM-G925F using XDA Free mobile app
My current ROM is the XEU G925FXXU3COI9
I want to flash the newest EE EVR ROM released this week G925FXXU2QOI4 but odin fails at
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU2QOI4_G925FEVR2QOI1_G925FXXU2QOI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!![/SIZE]
I have flashed original firmwares via Odin many times so I can't understand why it doesn't work this time. I have gone from EVR to BTU to EVR to XEU but now is seems I'm stuck.
Any ideas please?
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Skhulile said:
Hello
I would guess it's probably because your current version is a higher version compared to the one you want to flash, I mean you have U3 and want to flash U2.
But that's just my guess
Click to expand...
Click to collapse
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
gadgetgaz said:
Isn't there a way to go backwards? I know you can't go from 5.1 to 5.0 but I'm sure I've changed ROMs back to older versions before.
Click to expand...
Click to collapse
Yea I agree, but apparently some versions you can't downgrade, I'm sure I read it somewhere just can't remember where
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
UNICORNSRDABEST said:
I have a sprint s6 edge that I rooted but after i rooted it I flashed twrp recovery. Ironically it bricked my phone. I've tried using odin and I got this error: <ID:0/005> Complete(Write) operation failed.
Here's the whole log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, I have all the drivers installed and all of that. I am new to this kind of stuff and I've seen people talk about pit files. I don't kno what those are so I don't know if that would help me. I've been trying to fix this for 3 months please help.
Click to expand...
Click to collapse
Have you tried SmartSwitch its easier Then odin
osman34 said:
Have you tried SmartSwitch its easier Then odin
Click to expand...
Click to collapse
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
UNICORNSRDABEST said:
When I downloaded smart switch I got a side by side error. This happened on 2 different computers. I don't know how to fix it. I also tried using kies but I'm not sure how to get the s/n or imei.
Click to expand...
Click to collapse
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
callumbr1 said:
sboot.bin fail is the bootloader is older than your current one. Flash another firmware with a newer bootloader.
If you try smart switch you must fully close odin and phone still needs to be in download mode to do the emergency firmware recovery
Click to expand...
Click to collapse
So that means my odin is out of date or the stock firmware?
UNICORNSRDABEST said:
So that means my odin is out of date or the stock firmware?
Click to expand...
Click to collapse
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
callumbr1 said:
the stock firmware has a older bootloader.
flash a firmware with newer bootloader.
Click to expand...
Click to collapse
I'm still new to his stuff. What is a boot loader?
UNICORNSRDABEST said:
I'm still new to his stuff. What is a boot loader?
Click to expand...
Click to collapse
its part of the firmware package.
try to flash this firmware through odin
https://www.sammobile.com/firmwares/download/119909/G925PVPU4CPL3_G925PSPT4CPL3_SPR/