Related
Has anyone replaced the little plastic flap that covers the USB port? Mine has finally broken off.
Is there anywhere to get a replacement online, and is there a resource for disassembly for the g1?
TIA
My device (Touch PRO) doesn't have it at all. I've seen that some devices have it and some don't. I think you can compare it to suspension housing of mountain bikes - some have some don't. It is just a question of dirt management style. While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good. I don't think there is a good answer
I dont think he is looking for an opinion, I think he just flat out wants one. I could use one too, mine is broken as well.
As far as replacing, you can carefully insert it using a blunt pointed pin, I used some piano wire that was lying around when I did this to my last G1. Just "push" the ball into the housing. Alternately, you can use the plastic pry tools to lift that area, but it is a lot more work.
darfri said:
While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good
Click to expand...
Click to collapse
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
gospeed.racer said:
I dont think he is looking for an opinion, I think he just flat out wants one.
Click to expand...
Click to collapse
Who comes to XDA not expecting an opinion? So does anyone know if replacements are available?
bittermormon said:
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
Click to expand...
Click to collapse
Exactly what I'm thinking! Mine broke recently and I actually like my phone without it better. However, as soon as my contract expires, I will want to sell my phone and get N1, so I think having all parts in place would be helpful, but I can't find it anywhere
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
That might work. I'll order some and then post pictures.
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
Nice find
Karolis said:
That might work. I'll order some and then post pictures.
Click to expand...
Click to collapse
Looking forward to it.
I'm in the UK and they ship from the US, so it might take a while. I've ordered it on 15th and got a shipping confirmation the next day, so hopefully some time next week I'll have them.
OK, got them... and I think it's a bit of a waste of money. They're too small and also when you need to for example plug-in the headphones, you have to figure out where to put those flaps not to loose them.
Anyway, you decide:
I know this may sound weird, but perhaps the aluminum back plate is the cause of all the wifi and gps issues that people are reporting. does anyone have any plans to run tests without the back plate on? or even replace it completely?
$500 Experiment
Removing the back would be extremely interesting, but I can't afford the $500 experiment.
GCurry said:
Removing the back would be extremely interesting, but I can't afford the $500 experiment.
Click to expand...
Click to collapse
i second this. if someone was to remove the back plate it would definitely tell us if it was the problem or whether its software. and tbh its the only way were going to find out unless we just sit and wait for an official statement or update.
I smell a business opportunity...
BarryH_GEG said:
I smell a business opportunity...
Click to expand...
Click to collapse
void your warranty, but fix your prime?
BarryH_GEG said:
I smell a business opportunity...
Click to expand...
Click to collapse
Second this. If anyone has the capability to produce structurally sound plastic replacement backplate, remove stock aluminum and replace with plastic, I suspect people would be lined up. Should be Asus, and should be free. Mea cupla.
GCurry said:
Second this. If anyone has the capability to produce structurally sound plastic replacement backplate, remove stock aluminum and replace with plastic, I suspect people would be lined up. Should be Asus, and should be free. Mea cupla.
Click to expand...
Click to collapse
Seriously, I'll talk to a fabricator tomorrow. There are no complex lines in the back so it wouldn't be that hard. Some type of metal ornamentation could be used so that it matches the dock. I'd imagine it could be DIY for some and a 48 hour turn for people that want to send it in and have it done by a tech. As to the warranty, at least in the U.S., Asus can't void the warranty if an issue not related to the back cover comes up because of Magnuson-Moss.
BarryH_GEG said:
Seriously, I'll talk to a fabricator tomorrow. There are no complex lines in the back so it wouldn't be that hard. Some type of metal ornamentation could be used so that it matches the dock. I'd imagine it could be DIY for some and a 48 hour turn for people that want to send it in and have it done by a tech. As to the warranty, at least in the U.S., Asus can't void the warranty if an issue not related to the back cover comes up because of Magnuson-Moss.
Click to expand...
Click to collapse
I'll second that.
I want an embossed version that says. XDA Assisted Gps
BarryH_GEG said:
Seriously, I'll talk to a fabricator tomorrow. There are no complex lines in the back so it wouldn't be that hard. Some type of metal ornamentation could be used so that it matches the dock. I'd imagine it could be DIY for some and a 48 hour turn for people that want to send it in and have it done by a tech. As to the warranty, at least in the U.S., Asus can't void the warranty if an issue not related to the back cover comes up because of Magnuson-Moss.
Click to expand...
Click to collapse
forget having it metal to match the dock, I would love a clear back. when U got hardware like this why not show it off.
I saw a post on another forum where a guy did remove the back & he say wifi was increased substantially plus GPS too.
alright so my idea has taken off a bit.
I Don't see anything wrong with a plastic duplication of the aluminum cover.
I agree but how do you get the back cover off?
Arun01 said:
I saw a post on another forum where a guy did remove the back & he say wifi was increased substantially plus GPS too.
Click to expand...
Click to collapse
I have no trust in the luser that said that unless we can see a photo. He was booted from xda.
NOTE: This is a non functional phone, I believe the LCD is bad. But I can not verify or guarantee anything
Well my capacitive buttons finally crapped out on me. I bought a brand new digitizer and thought I did an excellent job replacing it but in the process somehow broke the LCD.
I am giving this phone away with the taker paying shipping cost.
Comes with the extended battery as well. I would prefer giving this to a dev so they can use it to continue development for this phone. It is S-OFF.
Let me know who wants it.
jaxsin said:
NOTE: This is a non functional phone, I believe the LCD is bad. But I can not verify or guarantee anything
Well my capacitive buttons finally crapped out on me. I bought a brand new digitizer and thought I did an excellent job replacing it but in the process somehow broke the LCD.
I am giving this phone away with the taker paying shipping cost.
Comes with the extended battery as well. I would prefer giving this to a dev so they can use it to continue development for this phone. It is S-OFF.
Let me know who wants it.
Click to expand...
Click to collapse
Shot you a PM
Hi all, I got a good deal on a used z3v(came from nexus 6 just wasn't feeling it much) I love this phone but I have a question the person I bought it from had removed the micro SD and USB flap that makes the phone waterproof (hence the reason I got such a good deal ). My question is where do I buy a replacement I see a replacement flap for the normal z3 on ebay, will it fit the z3v? Or with this phone being so similar to the z2 would i need to order one for that one?
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
GigaSPX said:
Whoa whoa, that's an awfully terrible thing someone would do to this phone. Removing the flaps is like saying "please let me drive my car without tires and see how this will work".
You would have to get Sony to repair your phone for you because the phone is sealed tight, preventing you from physically modifying it of the sorts.
Click to expand...
Click to collapse
So the replacement z2 or z3 flaps I see on ebay won't work?
Gcforreal01 said:
So the replacement z2 or z3 flaps I see on ebay won't work?
Click to expand...
Click to collapse
If they are the Z3V Variant then yes those will work. Any other Z2 or Z3 flaps that are not Verizon will not work.
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Gcforreal01 said:
That sucks since even cases for the Verizon variation is hard to find, oh well still a nice phone and I paid next to nothing for it so no worries as even when I had my s5 I never dunked it in water anyways. Thanks for the advice
Click to expand...
Click to collapse
I would be real careful with it though. Anything intruding into your phone can easily ruin it. It looks to me there's next to no protection for anything to enter without the flap. You should get a case that at least covers the exposed areas somehow.
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Gcforreal01 said:
How is that different from any other phone without protective covers on the USB? Not being a smart ass just asking. I have a otterbox defender but annoyingly it doesn't cover the flap area
Click to expand...
Click to collapse
If you look through the side where the micro usb port is, you can see the holes to see the internal where the display lights up. I feel as though dust can easily ruin the quality of the display or ruin the camera lens in the phone from taking great quality pictures.
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Well let us know how the installation goes and how the fit of the replacement is
hexto said:
I got one on ebay. Should be here tomorrow. Shipping was slow but it said it's the original part. Sony would not send me one. They offered to fix my phone for a fee if I mailed them the phone (I didn't get that far so I don't know how much). Here's the link.... Maybe they still sell them. Contact the seller, see what they say... http://pages.ebay.com/link/?nav=item.view&id=131457513807&alt=web
Sent from my D6708 using XDA Free mobile app
Click to expand...
Click to collapse
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Bruce Lee said:
Depending on how it goes and how difficult it is, if you want to of course..... make a small guide on how to put on those flaps. That might be helpful for some users in the future. Just throwing out an idea.
Click to expand...
Click to collapse
That's a great suggestion. I don't mind at all and would like to share. From what I can tell in my research, the port is designed like the Z1 and should not be difficult to install.
I just looked at the USPS tracking and my package arrived in Brooklyn NY tonight at 9:58pm. I'm in CT but doubt I'll get delivery tomorrow so it looks like Monday.
I'll be sure to post details. I'm glad to help others. I've sure have been helped more times than I care to admit by others. Besides, I can use some "Thanks" on my profile ?
Sent from my D6708 using XDA Free mobile app
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Stormwing said:
I just noticed mine snapped off some time today. Can't find it anywhere. Really hope this works out for you and that there will be more stock...
Click to expand...
Click to collapse
Me too. Hope to get it tomorrow. The USPS tracking hasn't been updated since Friday but it was close. Fingers crossed
Sent from my D6708 using XDA Free mobile app
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Stormwing said:
Quick question: anyone know if there's a difference in port cover color between the white and black Z3Vs?
Click to expand...
Click to collapse
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
GigaSPX said:
I doubt it. It's just the aluminum strip that's on the outside that show. Inside isn't different at all.
Click to expand...
Click to collapse
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Stormwing said:
Actually, upon further inspection, I'm positive there's a difference. I found a couple European sites offering Z3V parts, expressly labeled as Black or Silver. Before anyone gets too excited though, none of them have the USB covers in stock.
Display Doktor/World of Mobiles (looks like the supplier from hexto's link)
Magboss.eu
Click to expand...
Click to collapse
Seems unlikely that the port cover would be different other than in color. Try chatting with Sony. I did that when I was trying to see if they would sell me the part and they were pretty helpful. I chatted right from my phone using Chrome browser.
My port cover didn't arrive today. So annoying. I'm in CT and the package left Brooklyn, NY at 5:46am on Saturday. It should've been delivered today. Damn 3rd class mail. I feel like I've gotten straight from China packages quicker.
Sent from my D6708 using XDA Free mobile app
Yeah, I just mean the exterior color. Still want it to be the most perfect though. The white definitely has a lighter silver trim, while the black has a darker, slate grayish silver.
Black and White comparison video
My port cover arrived and after about a half hour of failed attempts I figured out how to easily install it without damaging it.
Unfortunately, the damn thing won't fit. It looks perfect but it won't stay closed. I have to press it hard so it closes but it pops right back open on it's own. Nothing like the other ports. I've contacted the seller. Hopefully they will make it right.
I did learn how to install it and will post the video tomorrow. For now, here are two pix showing the ill-fitting cover.
Waited 20 days for this crap ?
Sent from my D6708 using XDA Free mobile app
Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
mpeclipse03 said:
Hey everyone,
So today I noticed that the black rubber that is under the battery flap of my phone is starting to peel off. It isn't too terrible yet, but I do use the waterproof feature of my phone regularly and I don't want to jeopardize my phone if this peels off. Does anyone know where I can get a replacement cover? I checked eBay and didn't have much luck so I am hoping some of you guys may know of another site that supplies the OEM parts.
Thank you!
Click to expand...
Click to collapse
Yeah a common thing on these phones (USB cover door). I have not found any yet either, AliExpress had some but were pulled or ran out (just checked again they are back now, so AliExpress has them again --
https://www.google.com/search?q=Z3v+usb+cover+&ie=utf-8&oe=utf-8). Better link -- http://www.aliexpress.com/item/for-Sony-Xperia-Z3V-D6708-OEM-SIM-Card-Micro-SD-USB-Charging-Port-Dust-Plug-Waterproof/32430237429.html
I had to take my (wife's phone as well) phone back to VZW and get a replacement phone due to this. If your phone is within the one year warranty go to VZW store and show them they will get you another phone.
I did a test and if you apply a tiny amount of Vaseline on the seal it will work better as well as make a more watertight seal, just lightly coat the rubber seal, good idea to do all doors like that, I have a product called "dielectric grease" that works even better, use sparingly, can get at auto parts store.
So glad this is an easy purchase if I need it. Thanks.
Sent from my D6708 using XDA Premium 4 mobile app
And just like that they're gone, doubt they were genuine OEM anyways
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
nickmpower said:
And just like that they're gone, doubt they were genuine OEM anyways
Click to expand...
Click to collapse
No way! Crap, need to find a well stocked supplier of them. Description said -- Original - Brand New
But it also said -- Quantity: Large in stock
mpeclipse03 said:
They went fast! I just checked last night and I was going to purchase one this morning, but I guess that isn't happening.
Click to expand...
Click to collapse
Sorry, like I said -- they are there, then they are gone.
nickmpower said:
Still cant believe you can't get these from sony. I don't know if I could trust and off brand copy to be waterproof
Click to expand...
Click to collapse
Agreed, Sony should let people have access to their supplier. But then again Sony is greedy and wants the revenue from out of warranty repairs.
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
mpeclipse03 said:
I think I may have found the part here: http://magboss.eu/articles.php?currency=EUR&cid=1600
Click to expand...
Click to collapse
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd (never mind found the USD drop down at top of page) and how long until delivered? EU, can you find out supply level?
1linuxfreak said:
Let us know how it goes, it does appear to be the right cover and all but really can't tell without any pictures, those prices are odd and how long until delivered? EU, can you find out supply level and in US currency cost?
Click to expand...
Click to collapse
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
mpeclipse03 said:
Thankfully, I was raised in an Italian household and in Europe, the comma replaces the decimal point. So if something was say $3.50, in Europe, it would be written $3,50.
I did try to order one and to no surprise, they are out of stock. I did find a set of them on eBay though.
Click to expand...
Click to collapse
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
1linuxfreak said:
I found the USD currency price at top of page next to the language selector. Says 6.45 - 5.24 USD, there is a difference in USD and EU prices.
Glad you found one on Ebay.
My wife and I visited the VZW store today her usb cover seal tore again and I am still trying to get a good replacement for mine, both refurbished phone VZW sent out were junk, one the camera had a dab of something under glass on the lens and the other one the display was brown in tint or hue, if I don't get a good refurb in the next few tries I am going to just buy a cover and be done with it.
Click to expand...
Click to collapse
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
jal3223 said:
When you get your next refurbished device just remove the flap that you need from it. Just be careful when pulling it out and hold the white connector ribbon really good so that your fingers don't slide down it and rip the cover off (from the white piece).
Click to expand...
Click to collapse
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
1linuxfreak said:
You know I thought of that, but just to darn honest to do that.
Life sucks sometimes for being that honest, but I sleep well at night.
Click to expand...
Click to collapse
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
jal3223 said:
There's nothing dishonest about that at all. They are sending you a replacement phone expecting to get one back without a flap, correct? I bet they would even give you permission if you explain that you aren't happy with the quality of the refurbished devices. The flaps are easily interchangeable without any repercussions.
Click to expand...
Click to collapse
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
1linuxfreak said:
I agree with your logic, and I know the door is easily removed and replaced I have removed and replaced it on my phone several times. The phones are tagged with an identifying number and I bet VZW would be able to detect any deceit, would VZW care? Who knows?
Click to expand...
Click to collapse
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
jal3223 said:
No worries man. I'm glad there are still honest people out there with a conscience. I would suggest you to ask them though so there is no question about what you are doing. I'm fairly certain that they will allow you to. I would ask technical support rather than a normal CSR though. They seem to have more information. I've asked similar questions about refurbs and they are usually willing to do what it takes to make the customer satisfied (within reasonable limits). No harm in asking right?
Click to expand...
Click to collapse
Thanks for the ideas, no sweat off my back yet VZW is the one footing the bill for postage on the refurbished phones.
Got one!
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
nickmpower said:
I got a new flap off ebay here: http://www.ebay.com/itm/131518465518?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I received it in 9 days and carefully compared it side by side with a genuine one on a new phone and it appears the replacement is identical and genuine
Click to expand...
Click to collapse
Wow, pricey huh?
Yeah the price has gone up from $9 since I purchased, but still totally worth it. I got some wireless chargers and am only going to use those from now on.