Hi all,
I have been given the task of turning 10x 'Fizzbook Spin' laptops into device a preschool could use.
I have windows 10 working but it is slow and have decided to look into the android route, this runs faster but also has many more apps for young children available. I installed Remix OS onto the laptop without issue (1.6Atom + 1Gb RAM) but have a couple of questions.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Is the above possible? If not does anyone have any recommendations for an android type operating system I could put on this device which would work in this manner?
Thank you very much for any advice
Darren
drunken_prozac said:
Hi all,
I have been given the task of turning 10x 'Fizzbook Spin' laptops into device a preschool could use.
I have windows 10 working but it is slow and have decided to look into the android route, this runs faster but also has many more apps for young children available. I installed Remix OS onto the laptop without issue (1.6Atom + 1Gb RAM) but have a couple of questions.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Is the above possible? If not does anyone have any recommendations for an android type operating system I could put on this device which would work in this manner?
Thank you very much for any advice
Darren
Click to expand...
Click to collapse
About #1: Yes, you could.
Instead of installing with the official installer, flash Remix OS with it to a flash drive, and from Grub, press tab and replace what is written with "install=1 debug=" (important: "debug=" has nothing following it), and follow the instructions (I recommend creating and installing to an ext4 partition).
About #2: I have no idea, perhaps there is something in build.prop, I remember people talking about a line set to false, with "box" in it.
By the way, don't you want to try Phoenix OS?
It's supposed to be more stable.
And you could always try the original Android-x86.
moriel5 said:
About #1: Yes, you could.
Instead of installing with the official installer, flash Remix OS with it to a flash drive, and from Grub, press tab and replace what is written with "install=1 debug=" (important: "debug=" has nothing following it), and follow the instructions (I recommend creating and installing to an ext4 partition).
About #2: I have no idea, perhaps there is something in build.prop, I remember people talking about a line set to false, with "box" in it.
By the way, don't you want to try Phoenix OS?
It's supposed to be more stable.
And you could always try the original Android-x86.
Click to expand...
Click to collapse
Thanks for the reply,
I'm kinda new to this so don't know much linux
Phonenix OS I've seen about but didn't know which was more stable, I will try it tonight.
I've been assigned as the 'dad who knows about computers' at my sons nursery so they offload all the technical stuff off to me and ask if I can "make it work"
Just need to make it simple and easy for a 3yr old to play colouring games and ABC learning games on
drunken_prozac said:
Thanks for the reply,
I'm kinda new to this so don't know much linux
Phonenix OS I've seen about but didn't know which was more stable, I will try it tonight.
I've been assigned as the 'dad who knows about computers' at my sons nursery so they offload all the technical stuff off to me and ask if I can "make it work"
Just need to make it simple and easy for a 3yr old to play colouring games and ABC learning games on
Click to expand...
Click to collapse
Don't worry, I know exactly what it feels like, except in my case, it is "the older brother who is an expert in computers" at my sister's school, althoigh I'm no expert, but a computer passionist.
However, I do use Linux on my desktop, since it's much better than Windows in almost every way.
Unfortunately, there are many day-to-day apps on Windows that don't have an up to par Linux equivalent, unless you only use Latin-based languages, and possibly(?) slavic ones as well, no idea about far-east ones, though.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
Suggestion:
Use Windows to install Remix
Use EasyBCD to modify the boot default to Remix and set timeout to 2 seconds. It appears to boot directly to Remix
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Suggestion:
Use this method to disable the touchpad
http://forum.xda-developers.com/remix/remix-os/root-how-to-deactivate-device-remix-os-t3358963
Worked for me in same situation
Sent from my on Z00A using XDA Labs
Related
I have been trying for a few weeks to install kali linux on my lg g3. So far with no luck I have tried every guide on the internet but all have failed me can someone give me a detailed walkthrough on how to do so? my sd card is formatted and partitioned to fat32. I wish to install kali to the second 14 gig partition I made and named ext2. my phone is rooted with busy box installed it is the lg g3 S990 runing stock rom 5.0.1
anyone have any experience with this?
Here are some screen shots
Here are some screen shots
I don't think that you can..... They don't offical support it and there is a lot of things you have to take into effect. For example kernel, arm version, and hardware, wifi chips, touch screen drivers and a WHOLE LOT MORE!.
What would you suggest then? I'm debating getting a nexus 7 and installing nethunter on it would that be better??? I've been able to get quite close to having it work
turatt said:
What would you suggest then? I'm debating getting a nexus 7 and installing nethunter on it would that be better??? I've been able to get quite close to having it work
Click to expand...
Click to collapse
You can try that
GOOD NEWS (maybe)
I am able to get kali running through the complete linux installer app BUT it appears to be missing all pentesting tools and has no gui because vnc viewer wont connect but it does at least behave the way the app makers say it should :/
turatt said:
I am able to get kali running through the complete linux installer app BUT it appears to be missing all pentesting tools and has no gui because vnc viewer wont connect but it does at least behave the way the app makers say it should :/
Click to expand...
Click to collapse
Well, that's a start...
You can try opening a terminal and running: sudo apt-get install aircrack-ng
It says files are corrupted and cannot be read :/ ithink I will try limbo pc emulator instead will post the results
turatt said:
It says files are corrupted and cannot be read :/ ithink I will try limbo pc emulator instead will post the results
Click to expand...
Click to collapse
OK
So after many weeks of working day and night I finally have time to sit and tinker will post updates in the coming days
turatt said:
So after many weeks of working day and night I finally have time to sit and tinker will post updates in the coming days
Click to expand...
Click to collapse
Have you just looked into installing it onto like raspberry pi or a Chromebook or something? It seems pretty easy..... Plusnit might work better then the phone.
If I can't get to work ill be switching to a nexus seven with nethunter. I found a guide on how to run kali in limbo pc emulator and it appears to work to some extent but I get no gui nothing. I fear the iso file may be corrupted. Ill post screenshots next
turatt said:
If I can't get to work ill be switching to a nexus seven with nethunter. I found a guide on how to run kali in limbo pc emulator and it appears to work to some extent but I get no gui nothing. I fear the iso file may be corrupted. Ill post screenshots next
Click to expand...
Click to collapse
Just install gnome fallback or something....
Or open a terminal and try running "startx"
Here are my screenshots.
http://ikrami.net/2014/05/26/kali-linux-android/
This is the guid I have been using^
Just tried again with a new iso and limbo stopped working I will try reinstalling and wipeing cache in recovery.
turatt said:
Just tried again with a new iso and limbo stopped working I will try reinstalling and wipeing cache in recovery.
Click to expand...
Click to collapse
It could just be the arm version of our phone.... What are you trying to do with Kali?
Just run it I have a pwn box for mobile hacking so I can bluesnarf and do alot of fun things. I'm doing freelance pin testing so I thought it would be nice to be able to do those things on my phone without having to lug my laptop out
turatt said:
Just run it I have a pwn box for mobile hacking so I can bluesnarf and do alot of fun things. I'm doing freelance pin testing so I thought it would be nice to be able to do those things on my phone without having to lug my laptop out
Click to expand...
Click to collapse
OK, cool
Then I guess the nexus 7 is your best guest unless you get something like a Samsung S2 and put it in monitor mode and use aircrack-ng. Also the raspberry pi thing is pretty good if your like pretty handy you can wire up a battery, pi, and screen then just use a wireless keyboard.
S2 link: https://www.google.com/url?sa=t&sou...mgJhCRpHtESmUYXTw&sig2=IeGml16hwDKXeV9V7JXwRg
You can install kali linux on linux deploy and run with android VNC
I am running with linux deploy it on my AT&T 3g.
Im pretty sure your problem is in your configuration on preferences. Generally the SD is formatted to FAT which has maximum image file size 4095 MB. So pretty much if you want kali tools then hypothetically you could reformat your SD or external to ext4. There is also a permissions problem because of the image location. Here's how I got around it for now, I just started altering this phone 2 days ago so I'll keep you updated if you want. I moved the environment location to a folder in SD and it has consistently held up to 6000MB which is plenty for the os, necessary additions and a few fun kali tools.
Here's my mini pictorial, it's only my second post so maybe this will help.
Just do the settings like mine, Wait forever while it installs then after it finishes hit reconfigure. It takes a couple of minutes to reconfigure then you press start and wait until it's finished loading, press your home button, open VNC, make sure your port is 5900 and default password is "change me"
Open up a terminal and type "sudo su" make a password, update and make sure you have fun.
When you're finished go back to linux deploy, press stop and then use the menu button to exit the app
hello
I install Remix OS on my pc
Config
moderbord Asus P6TSE
Ram 24 GB
GPU GTX 960
CPU Intel® Core i7-920
i use a ssd to boot this os and freeze on boot ...
Image
http://img15.hostingpics.net/pics/339816IMG20160124171700.jpg
Checking Data Partition....
ANDROID
Click to expand...
Click to collapse
ty in advence
When you boot up press "e" to edit the boot info, place DEBUG=2 into the script after 'androidboot.hardware=remix_x86_64' so it looks like 'androidboot.hardware=remix_x86_64 DEBUG=2' hit F10 (softly)
Debug boot should begin.
Type exit when prompted, ignore any warnings that might come up concerning hardware not being picked up, type "exit" when prompted to do so to move on. After a few times typing "exit", does an error like this continue to roll up your screen: "init: Couldn't probe module 'net-pf-16-proto-5' "? :fingers-crossed:
i make a video
https://youtu.be/7tdO9nmLBmg
A quick question. Are there any other drives connected?
You could try actually install it onto your SSD from the boot up.. Your SSD would need 2 partitions though.. One is FAT32 (around 3GB large) and the other can be FAT32 or NTFS, it wont make a difference. If you want to know how to do the install from boot then just send a reply asking.
I have just tried with a different machine and I'm getting a full SELinux error. I doubt that there is anything that we would do.. (I'm not pro enough to go reading through the actual OS files... ) Not all PC's are supported unfortunately. Mine is not, I have had better luck running Remix OS in Virtual Box, well... before the latest release at least. Now I'm getting errors that seem to have been around since Android_x86 project began.
Another option would be to try the Legacy version if your motherboard is able to boot legacy. (Sorry, have not tried looking at your MoBo)
My advice (which I am also following) would be to be patient and just hold out for a while. Until the next update comes along for us to try.
More support is intended on being added with every release.
all my files is in a fat32 partitions and work on my laptop is just my pc ... wont works
Are there any other drives connected?
yes i have 4 drive with my pc
If it is working on your laptop then settle with that for now.
No, not other drives would be recommended, just saw them in the debug at the beginning.
The error that seems to be coming up for you and I (this is as far as I understand) has to do with kernel security settings as to what to allow on boot. The issue can arise when certain files have not been given the policy labels that they require to run. So they effectively get denied constantly. This is likely where a lot of the added hardware support will sort things out... I'm also running an NVidia Card.. could be the drivers needed..(although that would not explain why VM's don't work)
Sorry that I cannot help you mate.. This is going too deep into the realm that I know little about when it comes to the actual stuff. I follow instructions when having to make a change to my Linux distro.
I do envy you having the latest version working on a device. My laptop wont boot for me either.
You could try the Andriod_x86 forums and see what the common threads are. Seeing as Jide is using android_x86 as a base.
If anyone else knows more and is able to shed light on the matter, please do so? I am also up to correction on my statements.
I asked the same question on other forums and on google group
https://groups.google.com/forum/#!forum/remix-os-for-pc
http://forums.mydigitallife.info/threads/67863-Remix-OS-freeze-on-boot
gaaara said:
hello
I install Remix OS on my pc
Config
moderbord Asus P6TSE
Ram 24 GB
GPU GTX 960
CPU Intel® Core i7-920
i use a ssd to boot this os and freeze on boot ...
Image
http://img15.hostingpics.net/pics/339816IMG20160124171700.jpg
ty in advence
Click to expand...
Click to collapse
Nvidia GPUs have trouble with remix os and you wont be able to run it properly.
ty
a new version of remixos is released
https://groups.google.com/forum/#!topic/remix-os-for-pc/Tl9yTkALhN8
i test it and the os boot and loop on welcome menu ... loll i make video for skip the logo go to 1:30
https://www.youtube.com/watch?v=Cu6hF39CoJI
ty for your poste
I know its not an answer to your question, but have you tried the new 2 February version? I have got it working in VirtualBox atm.
Just as the title says, I'm curious if there exists a touch (or hardkey, i.e. volume up/down and windoes key) enabled bootloader.
Currently i have to press arrow keys and enter to select either windows or android.
Is there such a thing? It would be amazing. Id rather not have to stop at the keyboard to boot to an os from grub.
Thanks in advance!
Well .. I had suffered from this problem for longtime and finally I solved by an app called android-x86 installer it's the only way to boot from your Windows tablet without keyboard at last what I ended up with .. so yo have to download an old version I recommend the ALPHA version and install it with android-x86 installer 2.4 UEFI version after finished installing you have to download the latest version of remix OS and extract with 7zip or winrar then replace all file with the same name in folder androidOS that the direction of ALFA you already installed now You can boot with two ways either from settings/update / recovery and then press restart now at advanced startup then after reboot choose "use a device " and last thing chose android OS wait 9 seconds in grub2 an finally the remixOS will boot or by simply choose android OS from boot menu by volume Up/down
Boot solution for XPS 12 9250
Will thank you for this post when my 'Thanks!' get replenished on XDA. I'm still only using windows 10 on this tablet PC.
It is not clear to me is this is dual boot Android/Windows, my understanding is that this particular usage of the Linux grub bootloader only boots to Remix OS which is android. Grub, as you know does have dual boot capabilities, but maybe not yet on the XPS 12 9250.
Sorry, but the instructions are not step-by-step details for me, and I seem to be not smart enough to follow them. Could you point me to a 1..., 2..., 3.... please?
Please update or PM me whenever you feel you have found a better boot solution for our 9250's. I will be most grateful.
namitutonka said:
Will thank you for this post when my 'Thanks!' get replenished on XDA. I'm still only using windows 10 on this tablet PC.
It is not clear to me is this is dual boot Android/Windows, my understanding is that this particular usage of the Linux grub bootloader only boots to Remix OS which is android. Grub, as you know does have dual boot capabilities, but maybe not yet on the XPS 12 9250.
Sorry, but the instructions are not step-by-step details for me, and I seem to be not smart enough to follow them. Could you point me to a 1..., 2..., 3.... please?
Please update or PM me whenever you feel you have found a better boot solution for our 9250's. I will be most grateful.
Click to expand...
Click to collapse
Grub can chainload the entry just fine. And when using the official tool it auto-adds an entry if it detects Windows is installed, which it will be as it's a windows tool [unless running via wine] it'll add an entry for it.
Without the tool you can do it manually. Personally I have a second easy to access efi partition that I use, if you want to do the same download a partition manager like minitool and confirm that you have 16MB of unallocated space between your efi and C: drive and I'll dig up a post/walk you through the rest tomorrow
HypoTurtle said:
Grub can chainload the entry just fine. And when using the official tool it auto-adds an entry if it detects Windows is installed, which it will be as it's a windows tool [unless running via wine] it'll add an entry for it.
Without the tool you can do it manually. Personally I have a second easy to access efi partition that I use, if you want to do the same download a partition manager like minitool and confirm that you have 16MB of unallocated space between your efi and C: drive and I'll dig up a post/walk you through the rest tomorrow
Click to expand...
Click to collapse
Very excited to pursue this, but this week is filled with close family coming here to stay for our only holiday celebration. Will post back here when I get that unallocated space, after creating a backup of the current system. May use Gparted, but will check out minitool as well.
Walk through, dual boot Remix OS + Win10 on XPS 12 9250
@HypoTurtle
Waiting on a second USB-C to USB cable so I can boot a Macrium Reflect flash drive and backup a restorable PC image to an external Hard drive. After I'm sure I can restore this image I'll try to install Remix OS.
This youtube link is straightforward and simple to follow for the dual boot installation process. I've seen many reporting hardware/software issues on the many XDA forum threads branching off of "Remix OS for PC". So obviously one size does not fit all. Compiling and replacing different Linux kernels, editing grub.cfg, initrd.img, system.img, data.img.... The very worse thing on xda forums are ignorant end-user whiners like me who want instant gratification with their perfectly working phone or tablet. This vast forum has so many xda-developers, steeped in code, gaining and sharing trial and error knowledge. So many thousands of threads where xda-developers are taken for granted to lay solutions into end-user's laps. So many of us end-users are oblivious to this baby sitting. I will try the time consuming and painstaking learning curve. The least knowledgeable member on xda-forums should try to learn and not be spoon fed. It is essential, whatever our capacity, to all become developers interested in expanding the usefulness of our devices over and above the limited and constrained manufacturer's parameters.
Hi developers,
is any chance, that can i install any alternative OS to my Acer Chromebook 13 CB5-311? Device has a Nvidia Tegra K1 CPU, that is ARM. Chrome OS is not too bad, but i need some apps, which not exist or not work well.
I finding any OS. It may be Android or Ubuntu. But i need working offline apps (storage is not big problem i mean).
*Sorry for my bad english
just an idea
lord.wiccar said:
Hi developers,
is any chance, that can i install any alternative OS to my Acer Chromebook 13 CB5-311? Device has a Nvidia Tegra K1 CPU, that is ARM. Chrome OS is not too bad, but i need some apps, which not exist or not work well.
I finding any OS. It may be Android or Ubuntu. But i need working offline apps (storage is not big problem i mean).
yea im searching for the samething ... maybe somebody can fix the OS from the shield devices on to it
Click to expand...
Click to collapse
I have the same model. Great hardware, lousy os. Crouton with ubuntu trusty build runs well if you are a little computer savvy and dont mind typing in terminal commands. It runs parallel to chrome. I have heard you can install linux native on this model, but have never tried.
Hello, If you find a way how to install android apps on Acer CB5-311 chromebook, will be great. Thank you!
Yeah, it is possible.
lord.wiccar said:
Hi developers,
is any chance, that can i install any alternative OS to my Acer Chromebook 13 CB5-311? Device has a Nvidia Tegra K1 CPU, that is ARM. Chrome OS is not too bad, but i need some apps, which not exist or not work well.
I finding any OS. It may be Android or Ubuntu. But i need working offline apps (storage is not big problem i mean).
*Sorry for my bad english
Click to expand...
Click to collapse
I know you porobably solve your problem, or change your device, but i want to reply to it, if anyone else are searching for answers.
Because of drop of support for this device a have decided to move to linux.
On internet are some scrips, which can do it by one or two clicks, but they are old today and it's i bit more tricky today.
In general, you can use arch linux, which instalation still work, but graphical session doesn't start (i don't know why, i'm not expert on arch). You can use Clifford script, which don't work for today, because chrome os karnel has been changed and it is more difficult to use it.
So i install arch linux, with working kernel a delete it's rootfs. Into it i installed ubuntu-base 18.04, update, instal basic packages and kubuntu desktop.
Suprisingly it work very well, even graphic acceleration works.
If anyone wan't to know, how did i do it, i can help.
But i think no one is using it today, except few people like me.
Hy! need help cb5-311
Jirka13 said:
I know you porobably solve your problem, or change your device, but i want to reply to it, if anyone else are searching for answers.
Because of drop of support for this device a have decided to move to linux.
On internet are some scrips, which can do it by one or two clicks, but they are old today and it's i bit more tricky today.
In general, you can use arch linux, which instalation still work, but graphical session doesn't start (i don't know why, i'm not expert on arch). You can use Clifford script, which don't work for today, because chrome os karnel has been changed and it is more difficult to use it.
So i install arch linux, with working kernel a delete it's rootfs. Into it i installed ubuntu-base 18.04, update, instal basic packages and kubuntu desktop.
Suprisingly it work very well, even graphic acceleration works.
If anyone wan't to know, how did i do it, i can help.
But i think no one is using it today, except few people like me.
Click to expand...
Click to collapse
I need help to change chrome OS with linux on my old acer cb5-311. [email protected] Thank you!
In case no one has known yet, the CB5-311 is running an Nvidia Tegra K1 processer if I'm not mistaken. Therefore, because it is an ARM-based device, using another OS other than ChromeOS is impossible as far as I can tell.
Good to know about the Tegra k1 processor...
Hey, sorry for waiting.
Here is some linux images for this device: https://github.com/hexdump0815/imagebuilder
It is prepared to flash on SD and boot from it. From this awesome develeper can be also found the linux kernel for this chromebook.
It is also posible to did something similar like chrubuntu did earlier, it means flash kernel to KERNEL C partition and boot from internal storage (but my 16 GB internal storage is i bit small)
Good luck, with this.
P. S . only problem is with graphic drivers. Drivers provided from NVIDIA is for ubuntu 14 and they are too old to use. So you you have to regret hardware acceleration (or find another way how to make it work).
Read also the the issues and releases on github.
Second way is to use archlinux. There is and script, which will do anything for you.
https://github.com/RaumZeit/LinuxOnAcerCB5-311 even if this script isn´t for my CB5-311-T23S, it works.
If you don´t know how to resize internal storage and flash working kernel, it is posible to use this script and install arch linux and later back up kernel modules, format partition with root and there install ubuntu base. ArchKernel work fine with it, but latest working version is ubuntu 18. (Snap don´t work on this old kernel). If you want ubuntu 20 (or newer), you will have to use kernel from hexdump0815 mentioned earlier)
Hi XDA community, since I don't have enough power to land this on other forums I choose here.
First, this is my disclaimer:
Please try this at home at your own risk, the steps performed on this guide worked for me and may work for you.
Click to expand...
Click to collapse
But come on, this is XDA, you will figure it out without problems.:fingers-crossed:
Second, the good thing about this is you only need 3 ingredients:
Old tablet, The HP Stream 7 tablet SPECS
Precious Disk Space :victory:
Sweet Internet
W00t? no USB or Keyboard required? Yes, that's why it took me a while to glue the pieces together. Now, here we go:
I suggest to download PhoenixOS (November Release v1.1.2-226), because it worked for me immediately, I have an issue with RemixOS that I didn't try to fix it yet, I got stuck on the "Select Language" screen, but the steps may work for you.
Now, free disk space on your tablet, I did the upgrade to Windows 10 a while back and I had almost 1GB left on C, that's ridiculous because the drive has 20GB-ish, so, I google (yes, you need to do your homework too because I did the steps on the fly) how to recover space from the greedy Windows 10 OS, I removed a lot of useless info/cache/downloads/apps/etc and even compressed the Windows binaries (yes, you can do that). Concerned about Windows performance? be not, it works faster than ever. After the next steps this may seem useless but free space is free space, you'll need it later on life.
After all that dark magic, I was able to reclaim 10GB-ish, yeah!, but then realized I had 8GB more on the tablet "lost", this is the recovery partition for Windows 10, now, this is something that you may think of because you can get rid of all that info and reclaim what is yours, that partition is for you, but maybe you wont so this is one of these life choices. I did, I don't care about recovery stuff, most of my gadgets have custom ROMs or OSes. Used Minitool Partition Wizard Free and managed to reclaim the precious Disk Space.
Important thing here, some users Shrink the drive C to create a new partition, I didn't, used the 8GB partition instead.
We have Disk Space available, now, we prepare the operations table:
Disable Bitlocker on the drive you want to install the new OS.
Disable Secure Boot, power off the device and press Power+VolDown for a few seconds until you're on the BIOS.
Boot on Windows and install the Android OS flavor you want, I'll split the installation in two because for RemixOS is harder.
NOTE: Remember that grub doesn't support touch and both Android OSes grub have Windows as first OS to boot and kids, there is the key.
PhoenixOS
Download the OS
Extract it and run the installer
Select install to Hard Drive and install it on the Drive desired (I did that on E: which is the 8GB partition).
Restart and let the system do the job, you'll land on Windows again.
In Windows, as you read on the NOTE, we need to change grub.
Open Windows Powershell ISE in Admin mode (yeah yeah, yo can use whatever you want)
Then execute the command
Code:
mountvol B: /s
With this you'll be able to see the contents from the UEFI partition
Now, remember to select view all files, with WPISE open the grub.cfg file located on
Code:
B:\EFI\PhoenixOS\
Put the Windows entry below the PhoenixOS entry, change the grub timeout to 3 or whatever timeout you want, this change is for faster boot, save the file and you're ready to go.
Restart the system, press Power+VolDown -> F9, Select the PhoenixOS, let grub do the magic and you win
Notes about PhoenixOS
Phoenix OS installation, straight-forward on the 8GB partition
Needed to change Grub but friendlier than RemixOS
Keyboard behaves weird, you need to be accurate when using your fingers
When using browser and playing videos the tablet heats up hard
Rotation is wrong, I selected not to use rotation so I can use the UI without problems
Is fast, Wireless work
Something I saw one time is it got stuck when showing my user recently booted, restarted the device and then it worked again.
Video after the break.
Veredict: It works for me and can play with Android in a tablet without the need to buy another.
RemixOS
It supposed to have more support for things but looks like PhoenixOS has more . Not going to start a war here, I always try to find what suits best for me .
RemixOS is a pain on this tablet with the newest November 2016 version, I need to play more and harder.
You do almost the same as PhoenixOS, the installer is easy as well but it shows you an installation issue the first time, you need to restart the device and try the installation again. After that it was a game of try and fail but I sorted out the pieces.
Restart and you'll be on Windows again, well, let the system land on Windows and modify grub, kind of same as PhoenixOS:
Open Windows Powershell ISE in Admin mode
Then execute the command
Code:
mountvol B: /s
With this you'll be able to see the contents from the UEFI partition
Now, with WPISE open the grub.cfg file located on
Code:
B:\boot\grub\
Remember to select view all files
Put the Windows entry below the RemixOS entries, save the file, change the timeout and you're ready to go.
For RemixOS you also need to change the timeout for the theme.cfg file on
Code:
B:\EFI\RemixOS\
Restart the system, press Power+VolDown -> F9, Select the OS Bootloader, let grub do the magic (after some errors, just let it be) and you win (see, no hands mom!), well, sort of because it freezes :silly:.
I'll try to do more tests with RemixOS and see what happens.
Is this guide enough for you, not? blame the Internet or leave your comments.
Enjoy.
Thanks for the info.
I'm not getting any sound with PhoenixOS. WiFi is OK but sound & Bluetooth is not functional. Any suggestions ?
I've experimented with RemixOS as well...... sound works but it's very laggy and touch-screen / rotation is unresponsive. PhoenixOS is very stable and far far better but no sound :crying:
android x86 nougat on hp stream 7
Try this ISO of Android Nougat on the Stream 7, Wifi Bluetooth & Audio work. touchscreen is a little sensitive
Search youtube for HP Stream 7 for a link to the ISO.
I'm not aloud to post links on hear
mlckchip said:
Try this ISO of Android Nougat on the Stream 7, Wifi Bluetooth & Audio work. touchscreen is a little sensitive
Search youtube for HP Stream 7 for a link to the ISO.
I'm not aloud to post links on hear
Click to expand...
Click to collapse
Could you please explain the installation instructions?
Any news? I tried newest phoenix, but it´s way too heavy for it. Runs very slow. The older lollipop works better. The touchscreen is more a problem, it´s like a tablet from hell, very bad sensitivity.
The "Trekstor Surftab Xintron i 7.0" should be the same hardware and has android, so there could be a way to install this or at least use the touchscreen drive in phoenix. But I´m afraid of bricking it.