Hi XDA community, since I don't have enough power to land this on other forums I choose here.
First, this is my disclaimer:
Please try this at home at your own risk, the steps performed on this guide worked for me and may work for you.
Click to expand...
Click to collapse
But come on, this is XDA, you will figure it out without problems.:fingers-crossed:
Second, the good thing about this is you only need 3 ingredients:
Old tablet, The HP Stream 7 tablet SPECS
Precious Disk Space :victory:
Sweet Internet
W00t? no USB or Keyboard required? Yes, that's why it took me a while to glue the pieces together. Now, here we go:
I suggest to download PhoenixOS (November Release v1.1.2-226), because it worked for me immediately, I have an issue with RemixOS that I didn't try to fix it yet, I got stuck on the "Select Language" screen, but the steps may work for you.
Now, free disk space on your tablet, I did the upgrade to Windows 10 a while back and I had almost 1GB left on C, that's ridiculous because the drive has 20GB-ish, so, I google (yes, you need to do your homework too because I did the steps on the fly) how to recover space from the greedy Windows 10 OS, I removed a lot of useless info/cache/downloads/apps/etc and even compressed the Windows binaries (yes, you can do that). Concerned about Windows performance? be not, it works faster than ever. After the next steps this may seem useless but free space is free space, you'll need it later on life.
After all that dark magic, I was able to reclaim 10GB-ish, yeah!, but then realized I had 8GB more on the tablet "lost", this is the recovery partition for Windows 10, now, this is something that you may think of because you can get rid of all that info and reclaim what is yours, that partition is for you, but maybe you wont so this is one of these life choices. I did, I don't care about recovery stuff, most of my gadgets have custom ROMs or OSes. Used Minitool Partition Wizard Free and managed to reclaim the precious Disk Space.
Important thing here, some users Shrink the drive C to create a new partition, I didn't, used the 8GB partition instead.
We have Disk Space available, now, we prepare the operations table:
Disable Bitlocker on the drive you want to install the new OS.
Disable Secure Boot, power off the device and press Power+VolDown for a few seconds until you're on the BIOS.
Boot on Windows and install the Android OS flavor you want, I'll split the installation in two because for RemixOS is harder.
NOTE: Remember that grub doesn't support touch and both Android OSes grub have Windows as first OS to boot and kids, there is the key.
PhoenixOS
Download the OS
Extract it and run the installer
Select install to Hard Drive and install it on the Drive desired (I did that on E: which is the 8GB partition).
Restart and let the system do the job, you'll land on Windows again.
In Windows, as you read on the NOTE, we need to change grub.
Open Windows Powershell ISE in Admin mode (yeah yeah, yo can use whatever you want)
Then execute the command
Code:
mountvol B: /s
With this you'll be able to see the contents from the UEFI partition
Now, remember to select view all files, with WPISE open the grub.cfg file located on
Code:
B:\EFI\PhoenixOS\
Put the Windows entry below the PhoenixOS entry, change the grub timeout to 3 or whatever timeout you want, this change is for faster boot, save the file and you're ready to go.
Restart the system, press Power+VolDown -> F9, Select the PhoenixOS, let grub do the magic and you win
Notes about PhoenixOS
Phoenix OS installation, straight-forward on the 8GB partition
Needed to change Grub but friendlier than RemixOS
Keyboard behaves weird, you need to be accurate when using your fingers
When using browser and playing videos the tablet heats up hard
Rotation is wrong, I selected not to use rotation so I can use the UI without problems
Is fast, Wireless work
Something I saw one time is it got stuck when showing my user recently booted, restarted the device and then it worked again.
Video after the break.
Veredict: It works for me and can play with Android in a tablet without the need to buy another.
RemixOS
It supposed to have more support for things but looks like PhoenixOS has more . Not going to start a war here, I always try to find what suits best for me .
RemixOS is a pain on this tablet with the newest November 2016 version, I need to play more and harder.
You do almost the same as PhoenixOS, the installer is easy as well but it shows you an installation issue the first time, you need to restart the device and try the installation again. After that it was a game of try and fail but I sorted out the pieces.
Restart and you'll be on Windows again, well, let the system land on Windows and modify grub, kind of same as PhoenixOS:
Open Windows Powershell ISE in Admin mode
Then execute the command
Code:
mountvol B: /s
With this you'll be able to see the contents from the UEFI partition
Now, with WPISE open the grub.cfg file located on
Code:
B:\boot\grub\
Remember to select view all files
Put the Windows entry below the RemixOS entries, save the file, change the timeout and you're ready to go.
For RemixOS you also need to change the timeout for the theme.cfg file on
Code:
B:\EFI\RemixOS\
Restart the system, press Power+VolDown -> F9, Select the OS Bootloader, let grub do the magic (after some errors, just let it be) and you win (see, no hands mom!), well, sort of because it freezes :silly:.
I'll try to do more tests with RemixOS and see what happens.
Is this guide enough for you, not? blame the Internet or leave your comments.
Enjoy.
Thanks for the info.
I'm not getting any sound with PhoenixOS. WiFi is OK but sound & Bluetooth is not functional. Any suggestions ?
I've experimented with RemixOS as well...... sound works but it's very laggy and touch-screen / rotation is unresponsive. PhoenixOS is very stable and far far better but no sound :crying:
android x86 nougat on hp stream 7
Try this ISO of Android Nougat on the Stream 7, Wifi Bluetooth & Audio work. touchscreen is a little sensitive
Search youtube for HP Stream 7 for a link to the ISO.
I'm not aloud to post links on hear
mlckchip said:
Try this ISO of Android Nougat on the Stream 7, Wifi Bluetooth & Audio work. touchscreen is a little sensitive
Search youtube for HP Stream 7 for a link to the ISO.
I'm not aloud to post links on hear
Click to expand...
Click to collapse
Could you please explain the installation instructions?
Any news? I tried newest phoenix, but it´s way too heavy for it. Runs very slow. The older lollipop works better. The touchscreen is more a problem, it´s like a tablet from hell, very bad sensitivity.
The "Trekstor Surftab Xintron i 7.0" should be the same hardware and has android, so there could be a way to install this or at least use the touchscreen drive in phoenix. But I´m afraid of bricking it.
Related
-----------
HOW-TO: Ubuntu on Asus Transformer Prime TF201
Port by lilstevie (thank you for your hard work)
--------
DISCLAIMER:
I wrote this how-to from my experience installing successfully Ubuntu on my Prime.
I am in no way responsible for what you do with your Prime, even when you are following my instructions.
There is always the risk of making it worse, hardbricking your device, and this risk is completely down to you !
This is not a final version. This port is currently very unstable !
Install Ubuntu on your TF201 for testing purposes only !
HOW-TO Unbrick your Prime (or not...):
http://forum.xda-developers.com/showthread.php?t=1514088
--------
VERSION:
v0.1: First version of the tutorial
ABOUT:
- Working:
Wifi – Same patch as for the TF101
Keyboard (if you have a dock)
USB Host (if you have a dock)
- Partially working:
Graphics Acceleration (only 2D at this point)
Touchscreen (it works but every few touches are off target by 1/2 the screen)
- Not working:
Bluetooth
Trackpad
Sound
Sensors (ALS, Gyroscope, Accelerometer, GPS, magnetometer)
Shutdown, Reboot, Suspend
--------
Links:
Bootimage http://173.244.200.139/ports/prime-sdlinux.blob
RootFS http://173.244.200.139/ports/ubuntu-prime.img.gz
Fastboot http://alpharev.nl/wintools.zip
MD5:
9625d336062b2ff7eb9530dd5e48fb9e prime-sdlinux.blob
1a59e7918c199a85f805cb62ca130dae ubuntu.img
81238957a42b207213442cba7eeff684 wintools.zip
--------
Hardware:
Asus Transformer Prime TF201 (bootloader unlocked & with data/charge cable)
A computer with Linux installed
MicroSD card of at least 4GB (a fast card is better)
--------
Pre-requisities:
1. You need to have an already unlocked Prime.
To unlock it, use the official Asus Bootloader Unlock Tool APK on Android.
2. You need to have the latest ClockWorkMod (CWM) Recovery installed to easily backup & restore your device.
To install it, you can use the Android tool 'ROM Manager' from Play Store if you system is already rooted.
Otherwise, you can use the 'Fastboot' tool along with this tutorial (BE CAREFUL!):
HOW-TO 1: http://www.theandroidsoul.com/install-cwm-5-8-2-0-on-transformer-prime/
HOW-TO 2: http://forum.xda-developers.com/showthread.php?t=1576937
(You can also install the Touch version of CWM to avoid destroying your volume buttons while navigating )
CLASSIC : http://download.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-tf201.img
TOUCH : http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.1.8-tf201.img
3. Before trying to do anything with your device, make a full nandroid backup of the current WORKING Android system.
To do that:
- Reboot on CWM (see the sticky, at the end)
- Navigate to 'backup and restore', then 'backup'
- Wait until the full backup is done...
--------
- INSTALL Ubuntu -
Introduction:
To have a working Ubuntu system on the Prime, you have to:
- Extract the root file system on your MicroSD card
- Flash the bootimage right on the device
While installing Ubuntu, the only thing you modify about Android, is the bootimage. You leave the system intact,
so you'll be able to do a pseudo-dualboot between Ubuntu, and Android (we'll see that later).
HOW-TO:
Extraction of the root filesystem:
- Connect your MicroSD card on the computer running linux (ex: /dev/sdc)
- Umount all current partitions from the card
- Using fdisk, fully erase it, rebuild partition table, and create one partition (ex: /dev/sdc1)
- Format it in 'ext4' (ex: $ mkfs.ext4 /dev/sdc1)
- Using 'dd' command, extract the 'ubuntu.img' filesystem to the recently created partition
(ex: $ dd if=ubuntu.img of=/dev/sdc1)
- Wait until extraction completes... (It takes a while...)
- Mount the partition to verify that the extraction completes successfully (ex: $ mount /dev/sdc1 folder)
- Umount it, eject the card and put it on the Prime (ex: $ umount /dev/sdc1)
- Your Ubuntu filesystem is ready to use !
Flashing the bootimage (BE CAREFUL!):
- Reboot in fastboot mode (see the sticky, at the end)
- Connect the Prime to the computer, and be sure the drivers are correctly installed
You can find the drivers here: http://forum.xda-developers.com/showthread.php?t=1426502
- Extract the fastboot archive 'wintools.zip' and move the file 'prime-sdlinux.blob' in the same folder
- Execute the command: fastboot -i 0x0b05 flash boot prime-sdlinux.blob
(WARNING! This command will overwrite the bootimage of your Prime! Be sure you know what you're doing!)
- Wait until the flash completes... (it generally takes a few seconds...)
- When the blue progress bar is full, on the Prime, hold the Power switch to reboot the device
- Be sure that the MicroSD card is in the Prime
- Your Prime is now booting on Ubuntu, you should see some text displaying on the screen
- Wait until the system initializes... (It takes a while for the first boot...)
You should see kernel verbose booting, displaying something saying the system is resizing a partition
on the MicroSD card...
- Your Ubuntu system is installed ! You can do the graphical basic setup, then do a hard reboot of the device !
- Good luck with your freshly installed Ubuntu on your awsome Asus Transformer Prime !
--------
- RESTORE Android -
Introduction:
After installing Ubuntu, to have Android back on the Prime, you have to:
- (OPTIONAL: Do a full nandroid backup to be able to restore the Ubuntu bootimage directly from the CWM later)
- Simply restore the Android bootimage from the nandroid backup made before the installation of Ubuntu
HOW-TO:
To do that:
- Reboot on CWM (see the sticky, at the end)
- Go to 'backup and restore', then 'advanced restore'
- Choose the Android backup made before installing Ubuntu
- Choose 'Restore boot' option
- Wait until the restore is done...
- Choose 'reboot system now' to boot in Android
--------
- DUALBOOT Android/Ubuntu -
Introduction:
We can note that the both systems are installed on two different storage devices.
Android is directly on the device and Ubuntu is on the MicroSD.
The only thing that changes between the two systems is the bootimage.
If you have a nandroid backup of each WORKING systems, you can do an advanced restore of the boot 'boot.img'
of Ubuntu to boot it from the MicroSD card, or restore the boot of the Android backup to boot on Android !
HOW-TO:
To do that:
- Reboot on CWM (see the sticky, at the end)
- Go to 'backup and restore', then 'advanced restore'
- Choose the correct backup (the Android one, or the Ubuntu one)
- Choose 'Restore boot' option
- Wait until the restore is done...
--------
STICKY:
- Booting the Prime on recovery mode (CWM):
1. Power off the device (using Android, or by a long press of the power switch)
2. Power it on, by keeping simultaneously pressed the power switch and the volume down button
3. When text displays on top of the screen, release all, and press the volume up button
4. Wait a few seconds and CWM will appear on the Prime...
- Booting the prime in fastboot mode:
1. Power off the device (using Android, or by a long press of the power switch)
2. Power it on, by keeping simultaneously pressed the power switch and the volume down button
3. Wait until the message saying 'OS will coldboot in 10 seconds' etc... then release all buttons
4. Use the volume down button to select the USB icon
5. Validate with volume up
6. You can connect your device to a computer to send fastboot commands...
Testing request
If someone want to test it and confirm that this tutorial can be fully approved, it'll be great
This is really great news!!!...I wanted to run ubuntu on my prime and use it as fully fledged portable laptop...
all there already was had either ubuntu running through vnc server and that too outdated version or chroot ubuntu...(if i am not missing anything here)
I wish that we would be soon able to get ubuntu for android (UFA) from canonical preinstalled with the next update of tf201...I heard that we cannot possibly install it without asus agreeing to team up with canonical...
atm, this seems great...will test and report...!!!
Would be nice to have grub or a similar bootmanager to switch between the systems on startup
OP, so what is your connection with lilstevie? I notice the links for the downloads of the blob and image file go to http://lilstevie.geek.nz/ports/ and the files there are almost 6 weeks old. Your working/not working list is also the exact same as the original post from lilstevie at http://androidroot.mobi/2012/02/23/ubuntu-on-the-transformer-prime/
Just wondering are you actually developing any of this or just found the links and put up a howto?
Thanks
As I said at the beginning, this is the work of lilstevie. I searched how to install it, and once I've set it up on my Prime, I made that tutorial today.
I share it here if someone want to try installing Ubuntu on their Prime.
The files are the original ones hosted by lilstevie. And I did not found any version newer, so let's wait for a new release, or a final version.
And no I don't work with him for the development.
I was waiting for something like this! Thanks a lot for writing up a guide and trying it on tf201.
Now we need proper dual boot, shouldn't be too hard to figure out...
Just followed your howto and it's working fine on my tf201.
Now I'm updating via apt-get
Looking Forward to this
Will transform then Device into a laptop excellent.
Not sure why more people arn't getting involved.
ryanbell said:
Will transform then Device into a laptop excellent.
Not sure why more people arn't getting involved.
Click to expand...
Click to collapse
Probably due the the high risk of completely bricking your prime until a safe dual boot or single boot solution is in place. Certainly that is what is holding me back.
The whole reason I bought the Prime was for this, but without nvflash I am going to hold back until some more intrepid soul does the boot work
do we need linux to format the sd card or can we do it in windows?
jellydroid13 said:
do we need linux to format the sd card or can we do it in windows?
Click to expand...
Click to collapse
You need Linux, but don't let that stop you if you're a windows user - installing, say, Ubuntu is INCREDIBLY simple on windows, you can install it as a windows program, run live CDs, or (with just a liitle more effort) set up a dual-boot with windows and the Linux distros you like. I am NOT computer savvy, so trust me when I say it isn't hard
To anyone who has tried this, any comments on how well it runs? I'm not going to try this just yet, but I'm really curious. Does it run as well as Ubuntu on today's low-range laptops? I guess what I'm wondering is, does it seem like ordinary Ubuntu on ordinary x86 machine? Forget about the known issues, just browsing Unity or gnome, is it smooth and pleasant enough? Thanks for any info
Komodo Rogue said:
You need Linux, but don't let that stop you if you're a windows user - installing, say, Ubuntu is INCREDIBLY simple on windows, you can install it as a windows program, run live CDs, or (with just a liitle more effort) set up a dual-boot with windows and the Linux distros you like. I am NOT computer savvy, so trust me when I say it isn't hard
To anyone who has tried this, any comments on how well it runs? I'm not going to try this just yet, but I'm really curious. Does it run as well as Ubuntu on today's low-range laptops? I guess what I'm wondering is, does it seem like ordinary Ubuntu on ordinary x86 machine? Forget about the known issues, just browsing Unity or gnome, is it smooth and pleasant enough? Thanks for any info
Click to expand...
Click to collapse
thanks but i dug through and found my live linux flash drive(im no noob ) i will be installing soon and tell you how it goes.
just tried it and it looks very promising. I could finally use remote desktop decently from my prime and control vms within the server, which was awesome.
can't wait for these corageous and smart people to get dual boot working among the other issues
also found out:
- no functioning battery indicator for both batteries (dock/tablet)
- couldn't install flash so for youtube (guess none is available for arm?)
i also just tried it out and cant wait for it to be fully functional (is anyone even still working on it?) anyways i would replace android with it.
jellydroid13 said:
i also just tried it out and cant wait for it to be fully functional (is anyone even still working on it?) anyways i would replace android with it.
Click to expand...
Click to collapse
But then what is the point of having a tablet over a netbook or cheap laptop? Battery life? Touch screen?
dotnerdify said:
But then what is the point of having a tablet over a netbook or cheap laptop? Battery life? Touch screen?
Click to expand...
Click to collapse
Both of those things, plus versatility (dock, no dock, Linux or Android), and of course the cool factor
I would want to keep android around (hence desire for dual boot) for the times I might want it (like to watch movies on a flight, etc) but I think for the most part if there was a good, fast native Linux that's where I would be.
My opinion is that there is no need for Linux Ubutnu on Primes, because I bought just because PRIME has Android OS and has features that no laptop! And more like Prime with Android OS because it is function of the sea than no have a laptop with Windows, Mac or Linux Ubuntu. Some of the features that I like on my To: Touchscreen, Bluetooth, trackpad, sensor (ALS, Gyroscope, Accelerometer, GPS, magnetometer), shutdown, reboot, no need for always shotdown and wait time for the system start, It is great for work and playing games, two cameras, GPS, BATTERY LIVES IS MUCH BETTER THAN IN LAPTOPS and lot more options.
Sure tabs have their use cases, but having a full blown Linux distro running as well extends that set of use cases by a phenomenal amount. I can certainly use a Linux distro on my tab for the full blown IDE Eclipse an other apps available like FTP, VNC etc.
Current users, can you say how the touch screen works? Still half of the screen?
qubz said:
Sure tabs have their use cases, but having a full blown Linux distro running as well extends that set to use cases by a phenomenal amount. I can certainly use a Linux distro on my tab for the full blown IDE Eclipse an other apps available like FTP, VNC etc.
Current users, can you say how the touch screen works? Still half of the screen?
Click to expand...
Click to collapse
My touchscreen has been working fine so far also lilsteve said on his twitter that he has a most stuff working and that the release of Ubuntu 12.04 in 4 days is supposed to have native tegra 3 support so he is planning on a 12.04 release with most stuff working soon.
Sent from my Galaxy Nexus using Tapatalk 2
hello
I install Remix OS on my pc
Config
moderbord Asus P6TSE
Ram 24 GB
GPU GTX 960
CPU Intel® Core i7-920
i use a ssd to boot this os and freeze on boot ...
Image
http://img15.hostingpics.net/pics/339816IMG20160124171700.jpg
Checking Data Partition....
ANDROID
Click to expand...
Click to collapse
ty in advence
When you boot up press "e" to edit the boot info, place DEBUG=2 into the script after 'androidboot.hardware=remix_x86_64' so it looks like 'androidboot.hardware=remix_x86_64 DEBUG=2' hit F10 (softly)
Debug boot should begin.
Type exit when prompted, ignore any warnings that might come up concerning hardware not being picked up, type "exit" when prompted to do so to move on. After a few times typing "exit", does an error like this continue to roll up your screen: "init: Couldn't probe module 'net-pf-16-proto-5' "? :fingers-crossed:
i make a video
https://youtu.be/7tdO9nmLBmg
A quick question. Are there any other drives connected?
You could try actually install it onto your SSD from the boot up.. Your SSD would need 2 partitions though.. One is FAT32 (around 3GB large) and the other can be FAT32 or NTFS, it wont make a difference. If you want to know how to do the install from boot then just send a reply asking.
I have just tried with a different machine and I'm getting a full SELinux error. I doubt that there is anything that we would do.. (I'm not pro enough to go reading through the actual OS files... ) Not all PC's are supported unfortunately. Mine is not, I have had better luck running Remix OS in Virtual Box, well... before the latest release at least. Now I'm getting errors that seem to have been around since Android_x86 project began.
Another option would be to try the Legacy version if your motherboard is able to boot legacy. (Sorry, have not tried looking at your MoBo)
My advice (which I am also following) would be to be patient and just hold out for a while. Until the next update comes along for us to try.
More support is intended on being added with every release.
all my files is in a fat32 partitions and work on my laptop is just my pc ... wont works
Are there any other drives connected?
yes i have 4 drive with my pc
If it is working on your laptop then settle with that for now.
No, not other drives would be recommended, just saw them in the debug at the beginning.
The error that seems to be coming up for you and I (this is as far as I understand) has to do with kernel security settings as to what to allow on boot. The issue can arise when certain files have not been given the policy labels that they require to run. So they effectively get denied constantly. This is likely where a lot of the added hardware support will sort things out... I'm also running an NVidia Card.. could be the drivers needed..(although that would not explain why VM's don't work)
Sorry that I cannot help you mate.. This is going too deep into the realm that I know little about when it comes to the actual stuff. I follow instructions when having to make a change to my Linux distro.
I do envy you having the latest version working on a device. My laptop wont boot for me either.
You could try the Andriod_x86 forums and see what the common threads are. Seeing as Jide is using android_x86 as a base.
If anyone else knows more and is able to shed light on the matter, please do so? I am also up to correction on my statements.
I asked the same question on other forums and on google group
https://groups.google.com/forum/#!forum/remix-os-for-pc
http://forums.mydigitallife.info/threads/67863-Remix-OS-freeze-on-boot
gaaara said:
hello
I install Remix OS on my pc
Config
moderbord Asus P6TSE
Ram 24 GB
GPU GTX 960
CPU Intel® Core i7-920
i use a ssd to boot this os and freeze on boot ...
Image
http://img15.hostingpics.net/pics/339816IMG20160124171700.jpg
ty in advence
Click to expand...
Click to collapse
Nvidia GPUs have trouble with remix os and you wont be able to run it properly.
ty
a new version of remixos is released
https://groups.google.com/forum/#!topic/remix-os-for-pc/Tl9yTkALhN8
i test it and the os boot and loop on welcome menu ... loll i make video for skip the logo go to 1:30
https://www.youtube.com/watch?v=Cu6hF39CoJI
ty for your poste
I know its not an answer to your question, but have you tried the new 2 February version? I have got it working in VirtualBox atm.
Hi all,
I have been given the task of turning 10x 'Fizzbook Spin' laptops into device a preschool could use.
I have windows 10 working but it is slow and have decided to look into the android route, this runs faster but also has many more apps for young children available. I installed Remix OS onto the laptop without issue (1.6Atom + 1Gb RAM) but have a couple of questions.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Is the above possible? If not does anyone have any recommendations for an android type operating system I could put on this device which would work in this manner?
Thank you very much for any advice
Darren
drunken_prozac said:
Hi all,
I have been given the task of turning 10x 'Fizzbook Spin' laptops into device a preschool could use.
I have windows 10 working but it is slow and have decided to look into the android route, this runs faster but also has many more apps for young children available. I installed Remix OS onto the laptop without issue (1.6Atom + 1Gb RAM) but have a couple of questions.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Is the above possible? If not does anyone have any recommendations for an android type operating system I could put on this device which would work in this manner?
Thank you very much for any advice
Darren
Click to expand...
Click to collapse
About #1: Yes, you could.
Instead of installing with the official installer, flash Remix OS with it to a flash drive, and from Grub, press tab and replace what is written with "install=1 debug=" (important: "debug=" has nothing following it), and follow the instructions (I recommend creating and installing to an ext4 partition).
About #2: I have no idea, perhaps there is something in build.prop, I remember people talking about a line set to false, with "box" in it.
By the way, don't you want to try Phoenix OS?
It's supposed to be more stable.
And you could always try the original Android-x86.
moriel5 said:
About #1: Yes, you could.
Instead of installing with the official installer, flash Remix OS with it to a flash drive, and from Grub, press tab and replace what is written with "install=1 debug=" (important: "debug=" has nothing following it), and follow the instructions (I recommend creating and installing to an ext4 partition).
About #2: I have no idea, perhaps there is something in build.prop, I remember people talking about a line set to false, with "box" in it.
By the way, don't you want to try Phoenix OS?
It's supposed to be more stable.
And you could always try the original Android-x86.
Click to expand...
Click to collapse
Thanks for the reply,
I'm kinda new to this so don't know much linux
Phonenix OS I've seen about but didn't know which was more stable, I will try it tonight.
I've been assigned as the 'dad who knows about computers' at my sons nursery so they offload all the technical stuff off to me and ask if I can "make it work"
Just need to make it simple and easy for a 3yr old to play colouring games and ABC learning games on
drunken_prozac said:
Thanks for the reply,
I'm kinda new to this so don't know much linux
Phonenix OS I've seen about but didn't know which was more stable, I will try it tonight.
I've been assigned as the 'dad who knows about computers' at my sons nursery so they offload all the technical stuff off to me and ask if I can "make it work"
Just need to make it simple and easy for a 3yr old to play colouring games and ABC learning games on
Click to expand...
Click to collapse
Don't worry, I know exactly what it feels like, except in my case, it is "the older brother who is an expert in computers" at my sister's school, althoigh I'm no expert, but a computer passionist.
However, I do use Linux on my desktop, since it's much better than Windows in almost every way.
Unfortunately, there are many day-to-day apps on Windows that don't have an up to par Linux equivalent, unless you only use Latin-based languages, and possibly(?) slavic ones as well, no idea about far-east ones, though.
1. Can I install Remix OS without windows or any other operating system? I would like for them to turn the laptop on and it boots straight in to Remix.
Suggestion:
Use Windows to install Remix
Use EasyBCD to modify the boot default to Remix and set timeout to 2 seconds. It appears to boot directly to Remix
2. As it is for pre-schoolers I would like to use this as a tablet type device, whereas tapping or swiping on the screen would act like an android tablet and not move the mouse cursor.
Suggestion:
Use this method to disable the touchpad
http://forum.xda-developers.com/remix/remix-os/root-how-to-deactivate-device-remix-os-t3358963
Worked for me in same situation
Sent from my on Z00A using XDA Labs
Just as the title says, I'm curious if there exists a touch (or hardkey, i.e. volume up/down and windoes key) enabled bootloader.
Currently i have to press arrow keys and enter to select either windows or android.
Is there such a thing? It would be amazing. Id rather not have to stop at the keyboard to boot to an os from grub.
Thanks in advance!
Well .. I had suffered from this problem for longtime and finally I solved by an app called android-x86 installer it's the only way to boot from your Windows tablet without keyboard at last what I ended up with .. so yo have to download an old version I recommend the ALPHA version and install it with android-x86 installer 2.4 UEFI version after finished installing you have to download the latest version of remix OS and extract with 7zip or winrar then replace all file with the same name in folder androidOS that the direction of ALFA you already installed now You can boot with two ways either from settings/update / recovery and then press restart now at advanced startup then after reboot choose "use a device " and last thing chose android OS wait 9 seconds in grub2 an finally the remixOS will boot or by simply choose android OS from boot menu by volume Up/down
Boot solution for XPS 12 9250
Will thank you for this post when my 'Thanks!' get replenished on XDA. I'm still only using windows 10 on this tablet PC.
It is not clear to me is this is dual boot Android/Windows, my understanding is that this particular usage of the Linux grub bootloader only boots to Remix OS which is android. Grub, as you know does have dual boot capabilities, but maybe not yet on the XPS 12 9250.
Sorry, but the instructions are not step-by-step details for me, and I seem to be not smart enough to follow them. Could you point me to a 1..., 2..., 3.... please?
Please update or PM me whenever you feel you have found a better boot solution for our 9250's. I will be most grateful.
namitutonka said:
Will thank you for this post when my 'Thanks!' get replenished on XDA. I'm still only using windows 10 on this tablet PC.
It is not clear to me is this is dual boot Android/Windows, my understanding is that this particular usage of the Linux grub bootloader only boots to Remix OS which is android. Grub, as you know does have dual boot capabilities, but maybe not yet on the XPS 12 9250.
Sorry, but the instructions are not step-by-step details for me, and I seem to be not smart enough to follow them. Could you point me to a 1..., 2..., 3.... please?
Please update or PM me whenever you feel you have found a better boot solution for our 9250's. I will be most grateful.
Click to expand...
Click to collapse
Grub can chainload the entry just fine. And when using the official tool it auto-adds an entry if it detects Windows is installed, which it will be as it's a windows tool [unless running via wine] it'll add an entry for it.
Without the tool you can do it manually. Personally I have a second easy to access efi partition that I use, if you want to do the same download a partition manager like minitool and confirm that you have 16MB of unallocated space between your efi and C: drive and I'll dig up a post/walk you through the rest tomorrow
HypoTurtle said:
Grub can chainload the entry just fine. And when using the official tool it auto-adds an entry if it detects Windows is installed, which it will be as it's a windows tool [unless running via wine] it'll add an entry for it.
Without the tool you can do it manually. Personally I have a second easy to access efi partition that I use, if you want to do the same download a partition manager like minitool and confirm that you have 16MB of unallocated space between your efi and C: drive and I'll dig up a post/walk you through the rest tomorrow
Click to expand...
Click to collapse
Very excited to pursue this, but this week is filled with close family coming here to stay for our only holiday celebration. Will post back here when I get that unallocated space, after creating a backup of the current system. May use Gparted, but will check out minitool as well.
Walk through, dual boot Remix OS + Win10 on XPS 12 9250
@HypoTurtle
Waiting on a second USB-C to USB cable so I can boot a Macrium Reflect flash drive and backup a restorable PC image to an external Hard drive. After I'm sure I can restore this image I'll try to install Remix OS.
This youtube link is straightforward and simple to follow for the dual boot installation process. I've seen many reporting hardware/software issues on the many XDA forum threads branching off of "Remix OS for PC". So obviously one size does not fit all. Compiling and replacing different Linux kernels, editing grub.cfg, initrd.img, system.img, data.img.... The very worse thing on xda forums are ignorant end-user whiners like me who want instant gratification with their perfectly working phone or tablet. This vast forum has so many xda-developers, steeped in code, gaining and sharing trial and error knowledge. So many thousands of threads where xda-developers are taken for granted to lay solutions into end-user's laps. So many of us end-users are oblivious to this baby sitting. I will try the time consuming and painstaking learning curve. The least knowledgeable member on xda-forums should try to learn and not be spoon fed. It is essential, whatever our capacity, to all become developers interested in expanding the usefulness of our devices over and above the limited and constrained manufacturer's parameters.
Hello,
I'm having an odd issue with Remix OS for PC, and wanted to see if anyone else experienced this and hopefully found a resolution. Please see the bottom of the thread for info on my PC setup. My laptop is definitely more than powerful enough to handle remix, and it used to run fine, but now I seem to have the following issues after not booting into Remix for a while:
***Wifi does not automatically connect, it only connects if I click the wifi icon in the tray (then it connects to my network automatically)
***Nearly all apps will not open, including the Settings app. I'll click on an icon on the desktop, and the icon lights up, registering my click, but the app never opens and the icon stays lit as if something froze. However, I can still "swipe" from the left desktop to the right one, and vice versa.
***When attempting to install an app (Eventually, without any rhyme or reason that I've noticed, I can open the Play Store and maybe the settings app), the app hangs on Installing after it downloads. I've tried waiting a good 20 minutes, but I know the apps install much quicker on this laptop, and I've tried this with small apps.
***Similarly to the above, clicking the Remix OS menu button does nothing as well.
With those symptoms in mind, it seems like there's something holding the system back, but the actual GUI performance is fine. For example, there's no lag or hesitation when an app finally eventually opens or when I click around through the Settings app (when it finally opens). It doesn't seem to only be with graphic intensive apps either, as I tried a simple text/memo app and when that one eventually opens, the desktop background is black and the app window is black with only a menu near the top.
My attempts to fix it
So far, I've tried running an e2fsck -f data.img command to repair the data.img file. It didn't appear to report any issues and the problem did not go away. I've rebooted the thing about a billion times, no luck! Getting into the Settings app is hit or miss and I haven't really had any idea of what setting might help, and installing third party apps appears to not be an option either.
The only other option I could think of would be to backup my data.img and reinstall the OS, and then restore the data.img file, but this seems like it will restore the problem with it. Also, I haven't experienced any problems in Windows, so I don't think there is any issue with the drive. Sorry for such a long thread, just wanted to be detailed!
Any ideas are much appreciated!
My PC: Lenovo Ideapad y510p
Windows OS: Windows 10 64-Bit
Remix OS for PC: 3.0.207 dual booted with the above Windows 10 installation
Hard Drive: 500GB SSD drive
RAM: 16GB
I don't have any of those issues. My issues are a bit different...
I can't seem to find a copy of RemixOS 3.xx that actually has "true" root access. I know there is a method you can use to remount the volume as r/w, but since I am running it from a flash drive, I apparently cannot access any of the system files in Windows with hidden files and folders visible. And, after first boot the USB drive running the OS will somehow end up with a corrupted "REMIXOSDATA" partition.
Good luck on your quest.
ViolentNeurosis said:
I don't have any of those issues. My issues are a bit different...
I can't seem to find a copy of RemixOS 3.xx that actually has "true" root access. I know there is a method you can use to remount the volume as r/w, but since I am running it from a flash drive, I apparently cannot access any of the system files in Windows with hidden files and folders visible. And, after first boot the USB drive running the OS will somehow end up with a corrupted "REMIXOSDATA" partition.
Good luck on your quest.
Click to expand...
Click to collapse
Thank you for the response! In reading the issue you're having, I'm wondering Remix OS for PC, in its current state, is more susceptible to corruption issues in under some circumstances rather than others. When I first installed it, I installed the 64-bit version and I kept having issues where I'd boot it up and it suddenly would not start. I found somewhere on a forum where someone recommended to just use the 32-bit version and the issue went away for a long time, until I had the issue described in my original post. I'm wondering if it just isn't stable enough yet to be run from a flash drive, as it seems to me like it has issues with being easily corrupted.
This brings me to my next comment, I was able to fix my issue! I tried a couple things that didn't work, reinstalling Remix and then choosing YES to erase the entire virtual drive, then copying a backup of my original data.img back into the directory so I don't have to reinstall everything. This didn't fix the issue, so instead I downloaded the 64-bit version and installed it, but this time I chose NO on the prompt to erase my data.
Upon booting into Remix, it gave the standard Android message about optimizing apps and is now running good. I wish I did this workflow with the 32-bit version, as I'm wondering if it would have worked. I suspect I'll experience the same issues I originally experienced with the 64-bit version.
Anyway, I hope this may shed any light on how you can try to resolve your issue. Good luck!