I have Lenovo tab 2 a7-30hc Android 5.0.1 rooted I tried to flash sdk21-arm / sdk21-arm64 or sdk-x86 it's all keeps showing install aborted I tried rom manger twrp I changed the settings classic / recovery automatic and manual nothing work it keeps showing install aborted what should I do ? And If it need custom recovery help me or give me a link
Thanks in advance for your time
Sa7ory92 said:
I have Lenovo tab 2 a7-30hc Android 5.0.1 rooted I tried to flash sdk21-arm / sdk21-arm64 or sdk-x86 it's all keeps showing install aborted I tried rom manger twrp I changed the settings classic / recovery automatic and manual nothing work it keeps showing install aborted what should I do ? And If it need custom recovery help me or give me a link
Thanks in advance for your time
Click to expand...
Click to collapse
try sdk22 and you know what architecture version for your device processor need to download the firmware.
Røbin said:
try sdk22 and know what architecture version for your device processor need to download the firmware.
Click to expand...
Click to collapse
I tried xposed-sdk22-arm64 and still install aborted and I'm new at this so I can't know how and what firmware to install or use thanks again
Sa7ory92 said:
I tried xposed-sdk22-arm64 and still install aborted and I'm new at this so I can't know how and what firmware to install or use thanks again
Click to expand...
Click to collapse
Did you use Flashing app to flash zip?
Røbin said:
Did you use Flashing app to flash zip?
Click to expand...
Click to collapse
If you mean like flash Gordon or flashify then now I used them and still getting install aborted if not please help ... ?
Sa7ory92 said:
If you mean like flash Gordon or flashify then now I used them and still getting install aborted if not please help ... ?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B8eRnW5pT2J5UW16ZW1iX1NkRmM/view go to the link and download the twrp img and save it in computer.Now download this text file and save it in the same folder that you saved twrp img and use SP flash tool to flash the twrp recovery img.(If you already have twrp recovery installed then skip it).Now download xposed apk and install it. Download xposed zip and flash it via twrp recovery.But before doing this make a system backup because it can brick your device.I can't 100% guarantee you that this xposed will work on your device.Otherwise your device doesn't support any xposed framework right now.This can give you little hope.Good luck.
---------- Post added at 04:51 AM ---------- Previous post was at 04:43 AM ----------
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440 use xposed alpha installer.Aplha version for lollipop and marshmallow only.
thank you so much for your time it still not working looking forward to see new framework that compatible with my device
Sa7ory92 said:
thank you so much for your time it still not working looking forward to see new framework that compatible with my device
Click to expand...
Click to collapse
what it said?I mean error message.
Sa7ory92 said:
I have Lenovo tab 2 a7-30hc Android 5.0.1 rooted I tried to flash sdk21-arm / sdk21-arm64 or sdk-x86 it's all keeps showing install aborted I tried rom manger twrp I changed the settings classic / recovery automatic and manual nothing work it keeps showing install aborted what should I do ? And If it need custom recovery help me or give me a link
Thanks in advance for your time
Click to expand...
Click to collapse
1- First of all, I don't know what's your current status. So I just reply to your post to prevent possible wasting of time of other pals. "more info = more certainty".
2- Stop wasting your times with android 5. If you paid attention you probably know xposed framework have issues with android 5 and later. Just add already existed problems to device unpopularity and woyla! Headache?
3- Revert your rom to android 4, the first original rom of device. Yeah I know the pain but I could could give you one promise. You don't succeed with 5!
4- Make sure your su manager is Super Su not kingsu and other POSts.
5- If any "lenovo tab 2 a7-30HC" owner achieved or already have the above necessary terms, then post a reply here and the compatible xposed installer will be posted here ASAP.
---------- Post added at 05:18 AM ---------- Previous post was at 05:02 AM ----------
Here is header of xposed log:
"--------------
29 Apr 2017 17:18:58 UTC
Loading Xposed v54 (for Zygote)
Running ROM 'A7-30HC_S0017_141229_ROW_MY' with fingerprint 'Lenovo/LenovoTAB2A7-30HC/A7-30HC:4.4.2/KOT49H/A7-30HC_S0017_141229_ROW_MY:user/release-keys'
Loading modules from /data/app/com.spazedog.xposed.additionsgb-1.apk Loading class com.spazedog.xposed.additionsgb.backend.XposedInjectorLoading modules from /system/app/com.rootuninstaller.taskbarw8.apk Loading class com.rootuninstaller.taskbarw8.xposed.XposedMod
Hardware: mt8382
Product: LenovoTAB2A7-30HC
Device manufacturer: LENOVO
Device brand: Lenovo
Device model: Lenovo TAB 2 A7-30HC
Android SDK: 19
Android Release: 4.4.2
ROM: A7-30HC_S0017_141229_ROW_MY"
Guys, again noob questoin. I get this device completely bloated from my fried. Completely out of control, hard reset not possible. It was actually installing many apk that it downloads everywhere. Never seen that before .
I have installed https://firmwarefile.com/lenovo-a7-30hc through SPFlashTool. Everything now works fine excepts this is some "asia" version with Chinese and English. I would need to switch this to version that includes Czech language.
Before I did the flash I noticed "software update tool" offers update to "Lenovo_A7-30HC_S000125". I have found it on internet (https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=8682), but it doesn't have scatter file that is compatible with SPFlash Tool.
So my questions are
- how to install Lenovo_A7-30HC_S000125 throught SPFlashTool without propper scatter file? or where to get one that can be used?
- is there any other way how to push the firmware without rooting or installing TWRP?
Hey I have an issue:-
I was experimenting on lenovo tab 2 a7 30hc and hard bricked it.
I've been trying to install the stock rom from SP Flash tool and installed the mtk vcom preloader drivers but the phone still won't get detected.
Someone please help me out here please.
Røbin said:
https://drive.google.com/file/d/0B8eRnW5pT2J5UW16ZW1iX1NkRmM/view go to the link and download the twrp img and save it in computer.Now download this text file and save it in the same folder that you saved twrp img and use SP flash tool to flash the twrp recovery img.(If you already have twrp recovery installed then skip it).Now download xposed apk and install it. Download xposed zip and flash it via twrp recovery.But before doing this make a system backup because it can brick your device.I can't 100% guarantee you that this xposed will work on your device.Otherwise your device doesn't support any xposed framework right now.This can give you little hope.Good luck.
---------- Post added at 04:51 AM ---------- Previous post was at 04:43 AM ----------
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440 use xposed alpha installer.Aplha version for lollipop and marshmallow only.
Click to expand...
Click to collapse
can you provide me a twrp img file for lenovo tab 2 a7-30hc android 5.0.1? i cant find in google nor youtube. thanks!
Related
can anyone help me..?
Use Framaroot, it might work with rooting your phone. And MTKDroidTools for making recovery.
Sent from my Primo F3 using xda app-developers app
tuxboy said:
Use Framaroot, it might work with rooting your phone. And MTKDroidTools for making recovery.
Sent from my Primo F3 using xda app-developers app
Click to expand...
Click to collapse
not working..
bump thread
Rooting Tool that might work
This might work. After rooting install SuperSu or something like that and remove the chinese app.
http://www.mgyun.com/en/getvroot
Im already done root..
Now need cwm recovery..
Upload boot image to builder.clockqorkmod.com and download and flash the boot image via flashify
Press :highfive: thanks :good: if helped
ju_one06 said:
Im already done root..
Now need cwm recovery..
Click to expand...
Click to collapse
Hai...i made my own CWM Recovery for our S939...but only can use with Rom Ver S124 and S126,cannot use for S129 or new vibeui 4.4 kit kat...
How to root Lenovo S939 and install CWM RecoveryLike Tweet +1
What software did you use to root your Lenovo S939.
THanks
vimand said:
What software did you use to root your Lenovo S939.
THanks
Click to expand...
Click to collapse
Use vroot 1.7.5...latest one..but only version S125 and S126 can be root...if u upgrade to S129 or 4.4 kit kat...u can't root with vroot or any root app..i already try it..but kit kat for lenovo s939 is the best..wait until vroot update version...
any guide to replace superuser chinese to supersu..
im already follow guide http://forum.xda-developers.com/showthread.php?t=2532818
but not working..
Amierslims said:
Use vroot 1.7.5...latest one..but only version S125 and S126 can be root...if u upgrade to S129 or 4.4 kit kat...u can't root with vroot or any root app..i already try it..but kit kat for lenovo s939 is the best..wait until vroot update version...
Click to expand...
Click to collapse
hi, i already installed kitkat. the only problem now is gapps installed not running properly. any idea?
auspower said:
hi, i already installed kitkat. the only problem now is gapps installed not running properly. any idea?
Click to expand...
Click to collapse
u nid dwld and install gapps same version for android system..
if ur android version 4.2.2, u must install gapps 4.2.2
ju_one06 said:
any guide to replace superuser chinese to supersu..
im already follow guide http://forum.xda-developers.com/showthread.php?t=2532818
but not working..
Click to expand...
Click to collapse
im already find my own way to replace chinese superuser (vRoot) with SuperSU
1.Download SuperSU from Play Store
2.Open Lucky Patcher, move SuperSU to system/app then phone will reboot
3.Open Root Explorer, set RW and find Superuser.apk at system/app then delete
4.At system/app find eu.chainfire.supersu.apk and rename to Superuser.apk
5.After rename, click to install Superuser.apk from Root Explorer. After finish install then open it.
6.it will popup ask to update, select CWM install then phone will reboot
7.After that, phone already have SuperSU.
im already try at 2 phone Lenovo S939 (me and my friend phone)..
u can try it..
Tried Rom Istaller to install rom but does not recognise the zip file. How did you install KIT KAT to lenovo s939.
auspower said:
hi, i already installed kitkat. the only problem now is gapps installed not running properly. any idea?
Click to expand...
Click to collapse
Amierslims said:
Use vroot 1.7.5...latest one..but only version S125 and S126 can be root...if u upgrade to S129 or 4.4 kit kat...u can't root with vroot or any root app..i already try it..but kit kat for lenovo s939 is the best..wait until vroot update version...
Click to expand...
Click to collapse
Dear Amierslims,
Need your help to install KIT KAT ROM (VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44) into Lenovo S939. Tried installing but gives me error
-STATUS 7 & STATUS 6
-Tried editing the (updater-script) still same error STATUS 6 & 7
-I am using CWM Recovery 5.5.0.4
-Is your ROM custom ROM or official LENOVO ROM
Thanks
Help Much Appreciated.
vimand said:
Dear Amierslims,
Need your help to install KIT KAT ROM (VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44) into Lenovo S939. Tried installing but gives me error
-STATUS 7 & STATUS 6
-Tried editing the (updater-script) still same error STATUS 6 & 7
-I am using CWM Recovery 5.5.0.4
-Is your ROM custom ROM or official LENOVO ROM
Thanks
Help Much Appreciated.
Click to expand...
Click to collapse
Hai...i try help u with my own way.
What u need is :
1 - S125,S126 Rom File (If u need start from 0)
2 - SP Flash Tool v5.1348.00 or latest
3 - Original Lenovo Recovery
4 - CWM Recovery 5.5.0.4
5 - VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44 Rom (Now have 1413 update)
- First ur phone version must be in version S125,S126 or S129.
- If ur phone already flash CWM Recovery,u must flash back to original lenovo Recovery using SP Flash Tool,this is because if u want to upgrade to vibe ui 4.4.2..u need original Lenovo Recovery,cannot use CWM,dun't why.
- After that,Rename VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44.zip to update.zip and put in ur internal or external memory.
- Boot in ur Lenovo Recovery by press Vol +,- and power,selected update package,then let ur phone update by it self,at 50% its like freeze but wait in 1 minute it will continue.
- And right now im sure ur phone in 4.4.2,remember,in this version..u cannot root ur phone using any one click root like Vroot,even the latest one also cannot,i already try,but i found 1 way to root this version.
What u need to root version 4.4.2 and instaled Gapps :
1 - SP Flash Tool v5.1348.00 or latest
2 - CWM Recovery 5.5.0.4
3 - UPDATE-SuperSU-v1.93.zip file
4 - gapps-kk-20140105-signed file
- After u Succes upgrade to 4.4.2,flash ur recovery to CWM Recovery 5.5.0.4 by using SP Flash Tool
- Boot into CWM Recovey.
- Installed 2 file,first UPDATE-SuperSU-v1.93.zip and second gapps-kk-20140105-signed (just ignore any problem)
- Reboot ur system
- At first Startup,ur phone will update package,its for Gapps.
- After that u will set ur Google Play Store id.
- After Finish,ur phone will have all Gapps for 4.4.2 and Rooted with Superuser,no need to root using Vroot anymore and need to replace that root app..
Sorry for my bad english,so this is the way that i used,hope can help u too..
*Cannot Post Link For UPDATE-SuperSU-v1.93.zip and gapps-kk-20140105-signed coz im new in this XDA..so try google ur self.
*One more things,ur phone will be like factory reset,so backup ur file first
*After done all,installed Rom Toolbox Pro to remove any Chinese App.
ju_one06 said:
can anyone help me..?
Click to expand...
Click to collapse
Download Framaroot
Select one of the 2 exploits
Click on install supersu and binary
After install update superuser to pro or latest version
Enjoy your ride!
---------- Post added at 07:07 AM ---------- Previous post was at 07:00 AM ----------
auspower said:
hi, i already installed kitkat. the only problem now is gapps installed not running properly. any idea?
Click to expand...
Click to collapse
Download android 4.4 transformation pack install the gapps u want.
Or
Download aptoide update all the gapps.
Go to settings
Click on menu button on top(option button)
Click on reset app permissions
It will surely work
It will be sure success
Amierslims said:
Hai...i try help u with my own way.
What u need is :
1 - S125,S126 Rom File (If u need start from 0)
2 - SP Flash Tool v5.1348.00 or latest
3 - Original Lenovo Recovery
4 - CWM Recovery 5.5.0.4
5 - VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44 Rom (Now have 1413 update)
- First ur phone version must be in version S125,S126 or S129.
- If ur phone already flash CWM Recovery,u must flash back to original lenovo Recovery using SP Flash Tool,this is because if u want to upgrade to vibe ui 4.4.2..u need original Lenovo Recovery,cannot use CWM,dun't why.
- After that,Rename VIBEUI_V1.5_1411_8_DEV_S939_NK_W_5C44.zip to update.zip and put in ur internal or external memory.
- Boot in ur Lenovo Recovery by press Vol +,- and power,selected update package,then let ur phone update by it self,at 50% its like freeze but wait in 1 minute it will continue.
- And right now im sure ur phone in 4.4.2,remember,in this version..u cannot root ur phone using any one click root like Vroot,even the latest one also cannot,i already try,but i found 1 way to root this version.
What u need to root version 4.4.2 and instaled Gapps :
1 - SP Flash Tool v5.1348.00 or latest
2 - CWM Recovery 5.5.0.4
3 - UPDATE-SuperSU-v1.93.zip file
4 - gapps-kk-20140105-signed file
- After u Succes upgrade to 4.4.2,flash ur recovery to CWM Recovery 5.5.0.4 by using SP Flash Tool
- Boot into CWM Recovey.
- Installed 2 file,first UPDATE-SuperSU-v1.93.zip and second gapps-kk-20140105-signed (just ignore any problem)
- Reboot ur system
- At first Startup,ur phone will update package,its for Gapps.
- After that u will set ur Google Play Store id.
- After Finish,ur phone will have all Gapps for 4.4.2 and Rooted with Superuser,no need to root using Vroot anymore and need to replace that root app..
Sorry for my bad english,so this is the way that i used,hope can help u too..
*Cannot Post Link For UPDATE-SuperSU-v1.93.zip and gapps-kk-20140105-signed coz im new in this XDA..so try google ur self.
*One more things,ur phone will be like factory reset,so backup ur file first
*After done all,installed Rom Toolbox Pro to remove any Chinese App.
Click to expand...
Click to collapse
Thanks For the Help. Good Day
If my phone version is still s124, is it possible to use this method?
Thanks in advance.
hello,
i recently bought a micromax q355 which has mtk-mt-6582 chipset and rooted it using kingroot
the problem is i couldn't port any of the custom recoveries for my phoe i've tried all methods ie. cwm from mtk droid tools easy magic tools all versions (philz,twrp,carliv etc.) none of them worked!
all i get is error (no split image) or (cant find kernel.gz)
else the tool installs a recovery but shows a blank screen while in recovery mode.
and the phone fails to boot (had to reflash stock boot.img recovery.img and uboot.bin to make it boot again)
so if anyone can please provide any alternate solution.
details of my phone
maker: micromax
model: micromax q 355
android ver: 5.0
kernel ver: 3.10.54+
se linux: yes (permissive)
chipset: mediatek mt-6582
thanks
if you want to flash something from recovery you can use rashr from play store
Send me The Stock Recovery Ill Try My Level Best To Give u Recovery
charansai said:
Send me The Stock Recovery Ill Try My Level Best To Give u Recovery [/QUOi cant find custom recovery for micromax canvas play q355.......can u hepl me?
Click to expand...
Click to collapse
Presenting U TWRP For q355 tested and working fine
https://www.androidfilehost.com/?fid=24591000424952469
Hit Thanks If U Love It
twrp recovery error
Can't backup/restore properly using above recovery..... Also it shows status 7 error (errir in metadata_recursive)while flashing custom rom...please help
Use Philz Automatic Installer
https://forum.xda-developers.com/showthread.php?t=2748169
If your installed recovery shows a black screen , Im sure the PC you have has Win10
I suggest you to try the Tool in Windows 8.1 , Compatibility mode wont work , Im not sure why.
Still if this doesnt work , make sure your device are installed properly, I suggest you to install pda4net.
If any of the above suggestions donot work , contact me , I'll port manually for you
hry1607 said:
Can't backup/restore properly using above recovery..... Also it shows status 7 error (errir in metadata_recursive)while flashing custom rom...please help
Click to expand...
Click to collapse
In recovery you get status 7 error because it may be you trying to flash rom that not compatible to your phone.
Status 7 error is caused your rom updater script check your system for same model number for compatibility.
If you want solution go to these guide.
Ashwinrg said:
In recovery you get status 7 error because it may be you trying to flash rom that not compatible to your phone.
Status 7 error is caused your rom updater script check your system for same model number for compatibility.
If you want solution go to these guide.
Click to expand...
Click to collapse
No i have checked it .... There is nothing like assert in my updater script and also the recovery backup/restore not working properly..... I need a new recovery
akash14darshan said:
Use Philz Automatic Installer
https://forum.xda-developers.com/showthread.php?t=2748169
If your installed recovery shows a black screen , Im sure the PC you have has Win10
I suggest you to try the Tool in Windows 8.1 , Compatibility mode wont work , Im not sure why.
Still if this doesnt work , make sure your device are installed properly, I suggest you to install pda4net.
If any of the above suggestions donot work , contact me , I'll port manually for you
Click to expand...
Click to collapse
I can't find any installer (attachments) please help
hry1607 said:
I can't find any installer (attachments) please help
Click to expand...
Click to collapse
I dont why the download section has been removed ,
So here you go
https://mega.nz/#!nQUzAKrA!mXOVPvhD9-c8GwcEMv0o-HcrKy8XiPy65v0dtyobqHQ
Hit the Thanks Button , It would give me a good start
Cheers
not working
The recovery not working on my phone... When i boot into recovery the screen gradually brightens up till it becomes white and then the phone reboots normally.., please help
sir, plz update micromax q355 in marshmallow
Hello everyone I have flashed (SM-G750A Galaxy Mega 2 AT&T) with lover firmware (G750AUCU1ANI1) and phone got flashing failed now phone shows ( firmware upgrade encountered an issue. Please select recovery mode in Kies & try again . I also tried with Kies but, kies also downloads the same firmware I have tried to flash
Before flashing phone has this firmware (G750AUCU2AOEA 4.4.4)
Now kindly I need one of the following firmware or any other way to fix this phone
G750AUCU2AOEA 4.4.4
G750AUCU3AOFA 4.4.4
G750AUCU3BOH4 5.1.1
I spend much time on searching these firmware but failed
kindly Help me
Regards !!!
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
designgears said:
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
Click to expand...
Click to collapse
sir the phone was ok fully working i just tried to flash using Odin
i have just found this firmware (G750AUCU1ANI1) and while starting flash ..got failed
I have tried ur method boot into download mode and find proper firmware and flash using method but, the problem is that I couldn't find any firmware rather than (G750AUCU1ANI1)
Brother i guess i have what u need pcsolutionswh gmail
Any1's able to share an ADB dump or the whole 5.1.1 firmware? :highfive:
Conejo503 said:
Brother i guess i have what u need pcsolutionswh gmail
Click to expand...
Click to collapse
like what and how?
Please system dump!!!
Any1 can post the full 5.1.1 system dump??
Kernel 5.1.1
Would some1 be nice and upload the boot.img only
Thx in advance :highfive:
Only boot.img 5.1.1 G750A
Anyone can put it the boot.img of 5.1.1 G750-A that it contains the kernel to can be ported to N7100/I9300 :highfive::highfive:
---------- Post added at 11:21 PM ---------- Previous post was at 10:53 PM ----------
Here is a topic that people have this phone and they can send boot.img 5.1.1
http://forum.gsmhosting.com/vbb/f684/problem-connecting-sm-g750a-mega-2-a-2017889/
For example the user headszone1 have G750-A updated to 5.1.1 he can give the boot.img
The Galaxy Note 3 Neo SM-N7505 has received 5.1.1 TW
Galaxy Note 3 Neo SM-N7505 has received Lollipop 5.1.1 Touchwiz N7505POUDOK2 2 days ago. The boot.img (KERNEL) from this firmware can be ported to S3/N2?? This device has an Exynos 5260 Hexa-Core with a Mali T-624 graphics card. I want know if this kernel can be ported.
Thank you for your advice.
Have a nice day.
Anyone know if Exynos 5260 5.1.1 can be ported to Exynos 4412 ??
Here is the firmware but it is payment G750A 5.1.1
http://www.dlgsm.com/index.php?dir=...Files)/Model_G/G750A_(SM-G750A)/G750AUCU3BOH4
I have the solution for Samsung G750A, write in private.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
PM sent :highfive:
PM sent.
Have a nice day.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
Androidwizzard said:
PM sent :highfive:
Click to expand...
Click to collapse
pepelino123 said:
PM sent.
Have a nice day.
Click to expand...
Click to collapse
So far seemingly just a joke on serious interests
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Galaxy Mega 2 lollipop Firmware download link [ G750AUCU3BOH4 ]
Androidwizzard said:
Any1's able to share an ADB dump or the whole 5.1.1 fi
http://clangsm.com/ftpdemo/index.ph...Android/SM-G750A Samsung Galaxy Mega 2 (AT&T)
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Official_firmwares_
http://www.romup.com/roms/11852
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Hello Bro, I needed your help.
Click to expand...
Click to collapse
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Have you tried using Samsung Smart Switch to repair your firmware? You have to input your serial number in order to be able to download it. Try it and see if it works.
I just tried Smart Switch. It did as you suggested and said it was an incompatible device. So I put in my model/serial number. It still tries to install 4.4.4. It fails after it attempts to install with the following error on the phone in download mode:
"SW REV. CHECK FAIL DEVICE: 3. BINARY: 1" Why does Kies and Smart Switch try to install 4.4.4 instead of 5.1.1?
Next question, of those sites above. Would you guys recommend them at all? Are the files legit? Looks like the cheapest one would be $25 US to get 5.1.1.
TWRP FOR ALL SM-G318 SERIES( like SM-G318H or SM-G318MZ or SM-G318HZ )
All credit goes here : http://www.phonandroid.com/forum/galaxy-ace-4-neo-sm-g318h-t142379.html
Press THANK Button if it work for u :good:
(IMPORTANT)Before doing anything u need to:
-HAVE EXACT SAME MODEL (SM-G318 Series Line-up Model) and TO BE ROOTED.
The only way to get root is by flashing the Pre-rooted Firmware by Andro-Man: https://forum.xda-developers.com/android/development/pre-rooted-firmwares-samsung-sm-g318hz-t3230844
Warning!
if u have latest stock rom with "ASKS Security"....before doing any root method,pls downgrade to the older version of stock rom.
How to know if u have "ASKS Security" installed ?
-Go to Settings > About Phone > Find "ASKS Security Version"
If dont have it then u are on the old version of stock rom and can do any root method without any problem.
it is because if u do that u will get stuck on Logo when u boot for example "Galaxy V Plus" because i have sm-g318hz device.
i have experience this problem when i try flashing prerooted rom when i have "ASKS Security" installed on my sm-g318hz.
-Have the USB drivers installed on your computer.
-Have all File Requirement given
-Have a charged battery over 70%.
-Make a backup of your personal data.(Optional just incase)
I DONT RESPONSIBLE FOR ANY DAMAGE TO UR PHONE!! DO IT AT UR OWN RISK !!!!
File Requirement :
For Method 1 (via PC):
Odin : http://androidhost.org/wZgTz
TWRP Recovery : https://drive.google.com/file/d/0B-lRrn2nKLf4TW9iWHNaOXI5bjA/view?pref=2&pli=1
For Method 2 (without PC):
RASHR Flash tool: https://www.apk4fun.com/apk/925/?_e_pi_=7,PAGE_ID10,2769102785
TWRP Recovery: https://mega.nz/#!4NJBDbiB!PXQZ9YYfmo7cb-3zV11Eww7y4bXeFgoV7s8Mn8uNcz4
Method 1:
Installing TWRP Recovery (via PC):
1. Turn off your smartphone.
2. Execute the file Odin3_v3.10.06.exe contained in the unzipped folder.
3. Make sure you have only Auto Reboot and F. Reset Time of checked.
4. Select AP then choose twrp.tar file
5. On your smartphone, press and hold down the Volume Down + Home + Power and Volume Up to restart your smartphone into download mode.
6. Connect the smartphone to the computer with the USB cable of origin. The box below ID: COM should be colored.
7. Click Start to begin the installation.
8. Wait for the installation and do not touch anything until u see Green Light *PASS*
9. Wait for the installation and do not touch anything. Your smartphone automatically restart.
10. Turn Phone ur phone back.
11. Press Power button + Press Volume up button + Home Button to boot into recovery. Release ur finger after u see *Samsung Galaxy *
12. Ignore the message and swipe to right on slider given
13. That it now u have TWRP Recovery installed on your phone :fingers-crossed:
Example Picture for Instruction: http://www.hostingpics.net/viewer.php?id=170738212.jpg
Method 2:
Installing TWRP (without PC):
*If Method 1 is not working try this method.
1. Install RASHR Flash tool.
2. Put recovery.img into root External SD Card.
3. After that open the RASHR Flash tool and select Recovery From Storage.
4. Find and select the recovery.img
5. If the dialog appear press Yes and then reboot into recovery.
6. Wait for few second to reboot into recovery and u have TWRP installed
Nice!??? BTW! It's "TEAM" not "TWIN" ?
xAthenax said:
Nice!������ BTW! It's "TEAM" not "TWIN" ��
Click to expand...
Click to collapse
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
thnks dev for the recovery. any rom for this phone????
Kikaa99 said:
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
Click to expand...
Click to collapse
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
guvey said:
thnks dev for the recovery. any rom for this phone????
Click to expand...
Click to collapse
What's the model of your phone? I can search it
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
sm-g318ml
For now , they are still no dev working on custom rom for this model (SM-G318 Series) .
i have try some Galaxy V (SM-G313Hz) custom rom but then i got stuck on boot screen .
i know someone that made a Prerooted stock rom for (SM-G318 Series). u can google it or just search the thread in xda.
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
wow i though it only work for SM-G318 Series only ?
this is impossible ??
guvey said:
sm-g318ml
Click to expand...
Click to collapse
Unfortunately I can't find any custom Roms for your phone
it does not mater what phone model we have.if u found custom for that phone like *Cyanogenmod 12 for SM-G318ML* it also can be apply to all SM-G318 phone series like i mention in my top post.
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
pipyakas said:
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
Click to expand...
Click to collapse
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Kikaa99 said:
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Click to expand...
Click to collapse
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
pipyakas said:
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
Click to expand...
Click to collapse
Glad to hear that mate
Guys, pls share this post to all SM-G318 User :good:
Sharing is caring
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Adlxcrash said:
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Click to expand...
Click to collapse
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Kikaa99 said:
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Click to expand...
Click to collapse
Thanks but I gave up... I think it must be a hardware problem .... twrp works excellent so.. it may be another thing like wifi module in the board... thanks anyway mate!
Works on SM-G318ML?
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
NecroMacro said:
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
Click to expand...
Click to collapse
Root worked for me, so TWRP should work too.
Enviado de meu SM-A9000 usando Tapatalk
I have SM-G318HZ
I follow your instruction in ODIN
but twrp is not installed.
it still gives me the stock recovery.
any idea?
I recently bought Teclast Master T10 Tablet but I can't find any way to root it.
I googled this, but the problem is that there is no TWRP for this device, so I can't flash Magisk.
Any idea or guide would be really appreciated!
Thank you all in advance!
konstantinos3 said:
I recently bought Teclast Master T10 Tablet but I can't find any way to root it.
I googled this, but the problem is that there is no TWRP for this device, so I can't flash Magisk.
Any idea or guide would be really appreciated!
Thank you all in advance!
Click to expand...
Click to collapse
here. I think you need to be registered https://translate.google.com/translate?depth=1&hl=en&rurl=translate.google.com&sl=ru&sp=nmt4&tl=en&u=https://4pda.ru/forum/index.php%3Fshowtopic%3D841203%26view%3Dfindpost%26p%3D66359338
Maybe someone can upload the files from that russian site to another file sharing site so we can get them. Thank you!
You can use the 4PDA android app to register and download. I was able to root my Teclast T10 just now. If you have a location where to upload the files I can do that as well.
TWRP for Teclast T10:
https://cloud2.zoolz.com/s-hd3KCVJg
Where can I find scatter file for flashing with spflashtool?
Or is there another way to flash the twrp recovery?
We cant flash without the scatterfile. Maybe it will get uploaded soon.
---------- Post added at 01:38 PM ---------- Previous post was at 01:33 PM ----------
We have a new rom here, but cant download it.... https://pan.baidu.com/s/1jIzPU8Q
T10 (E3C5)-Android7.0-V1.28-A320.rar
Scatter file
Here is is the scatter file.
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
It is IMPORTANT to flash also SuperSu in TWRP!
Otherwise BootLoop!
Phuturist said:
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
Click to expand...
Click to collapse
I have updated before flashing TWRP.
Anyone tried to update with TWRP and or Root?
Maybe it will help to flash stock Boot.img and Recovery.img from latest Version (before Update) from Needrom.
Could anyone post a guide to root Teclast T10? Is this guide correct?
How to root telcast t10
Can anyone please give me a step by step guide of how to root telcast t10 or at least remove everything to making it stock OS.
Thanks
nJoy-Android said:
I have updated before flashing TWRP.
Anyone tried to update with TWRP and or Root?
Maybe it will help to flash stock Boot.img and Recovery.img from latest Version (before Update) from Needrom.
Click to expand...
Click to collapse
First tried without doing anything extra. TeclastOTA boots into TWRP recovery and is not able to upgrade. I tried flashing the original boot and recovery afterwards but was unable to boot, it got stuck on the Teclast logo. You could probably flash the clean factory rom will become available on needrom but I don't wanna lose all my data.
Phuturist said:
Just noticed there is a new OTA available through TeclastOTA. What would be the steps to get this OTA installed?
Click to expand...
Click to collapse
konstantinos3 said:
Could anyone post a guide to root Teclast T10? Is this guide correct?
Click to expand...
Click to collapse
Of course, it's ok.
In Russia forum they told to format data in recovery.
Otherwise you don't see any data with TWRP.
Worked for me.
Don't forget to flash also SuperSu or magisk, otherwise the system won't boot...
konstantinos3 said:
Could anyone post a guide to root Teclast T10? Is this guide correct?
Click to expand...
Click to collapse
That's the one I followed and which works of you have the correct scatter and recovery.img as posted in this topic. I flashed Magisk instead of SuperSU though.
Phuturist said:
First tried without doing anything extra. TeclastOTA boots into TWRP recovery and is not able to upgrade. I tried flashing the original boot and recovery afterwards but was unable to boot, it got stuck on the Teclast logo. You could probably flash the clean factory rom will become available on needrom but I don't wanna lose all my data.
Click to expand...
Click to collapse
Maybe it goes through, if you unroot before.
Because SuperSu make changes in System Partition.
Or you can flash also factory System Partition too.
nJoy-Android said:
Of course, it's ok.
In Russia forum they told to format data in recovery.
Otherwise you don't see any data with TWRP.
Worked for me.
Don't forget to flash also SuperSu or magisk, otherwise the system won't boot...
Click to expand...
Click to collapse
The reason I ask is that I have done the OTA Update today.
Are these TWRP and scatter file compatible?
konstantinos3 said:
The reason I ask is that I have done the OTA Update today.
Are these TWRP and scatter file compatible?
Click to expand...
Click to collapse
I have used this TWRP
http://www.mediafire.com/file/5q650gcdcu568v0/Teclast_T10.zip
The scatter from previous post (extracted from Needrom V1.24)
And SuperSu or Magisk
nJoy-Android said:
I have used this TWRP
http://www.mediafire.com/file/5q650gcdcu568v0/Teclast_T10.zip
The scatter from previous post (extracted from Needrom V1.24)
And SuperSu or Magisk
Click to expand...
Click to collapse
Thank you!
Did you firstly get the OTA Update and afterwards you flashed TWRP and root?
In the Russian forum say that "Recovery compiled on the basis of the kernel firmware Android 7.0 version V1.24 / Wed Oct 11 20:24:36 CST 2017 "
After today's Update the kernel version is V.1.28_20171120