Hello everyone I have flashed (SM-G750A Galaxy Mega 2 AT&T) with lover firmware (G750AUCU1ANI1) and phone got flashing failed now phone shows ( firmware upgrade encountered an issue. Please select recovery mode in Kies & try again . I also tried with Kies but, kies also downloads the same firmware I have tried to flash
Before flashing phone has this firmware (G750AUCU2AOEA 4.4.4)
Now kindly I need one of the following firmware or any other way to fix this phone
G750AUCU2AOEA 4.4.4
G750AUCU3AOFA 4.4.4
G750AUCU3BOH4 5.1.1
I spend much time on searching these firmware but failed
kindly Help me
Regards !!!
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
designgears said:
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
Click to expand...
Click to collapse
sir the phone was ok fully working i just tried to flash using Odin
i have just found this firmware (G750AUCU1ANI1) and while starting flash ..got failed
I have tried ur method boot into download mode and find proper firmware and flash using method but, the problem is that I couldn't find any firmware rather than (G750AUCU1ANI1)
Brother i guess i have what u need pcsolutionswh gmail
Any1's able to share an ADB dump or the whole 5.1.1 firmware? :highfive:
Conejo503 said:
Brother i guess i have what u need pcsolutionswh gmail
Click to expand...
Click to collapse
like what and how?
Please system dump!!!
Any1 can post the full 5.1.1 system dump??
Kernel 5.1.1
Would some1 be nice and upload the boot.img only
Thx in advance :highfive:
Only boot.img 5.1.1 G750A
Anyone can put it the boot.img of 5.1.1 G750-A that it contains the kernel to can be ported to N7100/I9300 :highfive::highfive:
---------- Post added at 11:21 PM ---------- Previous post was at 10:53 PM ----------
Here is a topic that people have this phone and they can send boot.img 5.1.1
http://forum.gsmhosting.com/vbb/f684/problem-connecting-sm-g750a-mega-2-a-2017889/
For example the user headszone1 have G750-A updated to 5.1.1 he can give the boot.img
The Galaxy Note 3 Neo SM-N7505 has received 5.1.1 TW
Galaxy Note 3 Neo SM-N7505 has received Lollipop 5.1.1 Touchwiz N7505POUDOK2 2 days ago. The boot.img (KERNEL) from this firmware can be ported to S3/N2?? This device has an Exynos 5260 Hexa-Core with a Mali T-624 graphics card. I want know if this kernel can be ported.
Thank you for your advice.
Have a nice day.
Anyone know if Exynos 5260 5.1.1 can be ported to Exynos 4412 ??
Here is the firmware but it is payment G750A 5.1.1
http://www.dlgsm.com/index.php?dir=...Files)/Model_G/G750A_(SM-G750A)/G750AUCU3BOH4
I have the solution for Samsung G750A, write in private.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
PM sent :highfive:
PM sent.
Have a nice day.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
Androidwizzard said:
PM sent :highfive:
Click to expand...
Click to collapse
pepelino123 said:
PM sent.
Have a nice day.
Click to expand...
Click to collapse
So far seemingly just a joke on serious interests
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Galaxy Mega 2 lollipop Firmware download link [ G750AUCU3BOH4 ]
Androidwizzard said:
Any1's able to share an ADB dump or the whole 5.1.1 fi
http://clangsm.com/ftpdemo/index.ph...Android/SM-G750A Samsung Galaxy Mega 2 (AT&T)
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Official_firmwares_
http://www.romup.com/roms/11852
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Hello Bro, I needed your help.
Click to expand...
Click to collapse
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Have you tried using Samsung Smart Switch to repair your firmware? You have to input your serial number in order to be able to download it. Try it and see if it works.
I just tried Smart Switch. It did as you suggested and said it was an incompatible device. So I put in my model/serial number. It still tries to install 4.4.4. It fails after it attempts to install with the following error on the phone in download mode:
"SW REV. CHECK FAIL DEVICE: 3. BINARY: 1" Why does Kies and Smart Switch try to install 4.4.4 instead of 5.1.1?
Next question, of those sites above. Would you guys recommend them at all? Are the files legit? Looks like the cheapest one would be $25 US to get 5.1.1.
Related
Hi, I have a SM-A300F and I have been searching high and low for root guides/custom recovery for my device but not one seem to have develop anything yet for the SM-A300F or any other Samsung Galaxy A series(A3,A5,A7)
So is there any root this this specific firmware?Please
Product code SER
PDA A300FXXU1BOD5
CSC A300FOXY1BOD5
If there isnt any root/custom rcvry made for this device can someone make one please?
Or perhaps a specific guide on how to build one. Thanks in advance!!:
EDIT(SOLVED): Okay thanks to @Reyzeer for helping me out with rooting my device.
Reyzeer said:
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the official 5.0.2 Firmware
Rename the official 5.0.2 Firmware file extension from .tar.md5 to .tar
Open it with WinRar
Extract recovery.img and boot.img
Download Flashify in your android device
Copy recovery.img and boot.img to your phone (I edited this line to fix the recovery bootloop problem)
then flash recovery.img using flashify
then flash bootimg using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Click to expand...
Click to collapse
P>S dont thank me. Thank Reyzeer!
+1
Tried using 4.4.4 Root (CF-Auto Root) .. successful at first boot. But when you restart/power off. It won't turn on..
Only works in Download Mode .. No recovery mode
Yeah. I tried that on my SM-A300F too but if your device isnt running on the same built id*KTU84P.A300FXXU1ANL1 then it wouldn't work. I just hope CF will update the new CF-Auto root.
Sent from my SM-A300F using XDA Free mobile app
Screnshots
Hi,
Can you upload screenshots of the Galaxy A3 lollipop please such as the lock screen and Home Screen
---------- Post added at 01:48 PM ---------- Previous post was at 01:43 PM ----------
bernardwu said:
Hi, I have a SM-A300F and I have been searching high and low for root guides/custom recovery for my device but not one seem to have develop anything yet for the SM-A300F or any other Samsung Galaxy A series(A3,A5,A7)
So is there any root this this specific firmware?Please
Product code SER
PDA A300FXXU1BOD5
CSC A300FOXY1BOD5
If there isnt any root/custom rcvry made for this device can someone make one please?
Or perhaps a specific guide on how to build one. Thanks in advance!!
Click to expand...
Click to collapse
Can you upload screenshots of this please of A3 Lollipop 5.0.2 such as lock screen and home screen and phone dialler and messaging
Galaxy A300F
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Weather Widget
Hi,
What is the weather widget like on the A3 5.0.2 is it changed to the S6 weather widget or the same .
Please send me a screenshot of that please.
Thanks,
Sanay
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?[/QUOTE]
It's like this.. See attachment. Cant put links
Notification panel
What does notification bar look like please last one
sanayp said:
What does notification bar look like please last one
Click to expand...
Click to collapse
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
You could have just uploaded a pic of notification bar then downgraded
Reyzeer said:
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Click to expand...
Click to collapse
THANKS CAPTAIN!!!!
Will try it out after getting back to home!!!! kinda busy right now!
Will tell if it will work when I try it!!!
sanayp said:
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Click to expand...
Click to collapse
[/QUOTE]
Wait.. I am not sure what to do here.
1.I go to download mode, flash the cfautoroot.zip for 4.4.4 eventhough I am 5.0.2 right?
2.then you say flash the recovery.img from 5.0.2 StockRom file.
this is the part I don't quite get it. Cause you said dont reboot.
Do I flash it when my phone is turned on or should I put it in download mode to flash???
EDIT: OK ignore the all of the above. I got it now. I was stupid and blind. lol
EDIT2: All work perfectly. THANKS
Reyzeer said:
Successfully rooted my 5.0.2.
Is it clear for you sir?
Click to expand...
Click to collapse
there seems to be another problem.
rverytime I reboot my phone it reboots itself into recovery mode. It's Kinda annoying.
Anyway to fix this?
bernardwu said:
there seems to be another problem.
rverytime I reboot my phone it reboots itself into recovery mode. It's Kinda annoying.
Anyway to fix this?
Click to expand...
Click to collapse
what I did was shut down the phone for 5 minutes. power on, then reboot
Reyzeer said:
what I did was shut down the phone for 5 minutes. power on, then reboot
Click to expand...
Click to collapse
but when I shut it down it also automatically goes into recovery. Even if I choose power down in the stock recovery it stills reboots into recovery. I can boot it back up perfectly tho but now I just can't fully shut my phone down.
How did you manage to shut your phone down?
I shut down my phone via option from holding power button.
did you shutdown your phone by holding the power button for a period of time or you choose from the option from holding the power button for a few seconds??
Edit: I got it. I went to download mode via terminal emulator and then shutdown from there.
Upgraded To *********BOD9
[/B]
Reyzeer said:
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
Click to expand...
Click to collapse
Thank you very much for your instructions and I was able to upgrade my firmware to ********BOD9 (Russia). I did not feel any lagginess and the upgrade is smooth and stable from 4.4.4 to Android Lollipop 5.0.2 ********BOD9 (Russia). After I updraded the firmware, I root my phone using CFRoot 4.4.4, followed your instructions carefully. I did extra work to make sure the system is clear so that there will be no lagginess. After flashify the recovery.img and boot.img rebooted the phone by flashify it went back to the recovery. Then I wipe data cache and wipe cahe. Go to bootloader mode and again install ********BOD9 using ODIN V 3.10.6 and root and copy the recovery.img and boot.img of ******BOD9 to external SD Card. Next flashify the recovery.img and boot.img and reboot. Then the problem of recovery still exist. I off my phone for 2 minutes. Turn on my phone again, do restart and the problem of going to recovery was gone. Take note that flashify will be used for 3 flashing per day. If you consume the 3 flashing don't reboot your phone, patiently wait for 1 day and flashify the recovery and boot.img then reboot using flashify. It will bring you to the bad recovery and reboot system. Now my phone is updated to Android 5.0.2, no lagginess & no stuttering and no recovery problem. The only problem problem is I cannot backup my rom. Still waiting for CWM Recovery for SM-A300F.
Thx this helped but after rooting it, when I turn off the screen, after a while, it reboots and I don't know how to stop it. Any help please?
Reyzeer said:
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
Click to expand...
Click to collapse
forgive for my poor english. I have downgrade from lolipop to kitkat causevi think lolipop is very laggy, and is not going well. my back and recent key is not working. I'v tried to reboot the phone for many times and also tried to wipe data/dalvik in recovery but it still not work. Bro..! Can u teach me how is the right methode for downgrade it..? Realy2 need help
Hi do you have the stock music player of A3? I don't know why I don't have it on my phone after I upgraded it to 5.0.2
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
Hi this tutorial is for them who wants to upgrade to Android 6.0 on J5 and also for those who wants to downgrade back to 5.1 on their J5 (2015) manually using odin.
This tutorial will be divided into three section upgrade, downgrade and rooting.
Upgrade to Android 6.0
As Samsung has started rolling out android 6.0 for J5 (2015) model. It will be available to all the regions sooner or later on most of the models of J5. Incase if you are not getting OTA update of android 6.0 on your country and are curious to try Android Marshmallow, you can try to flash android 6.0 available for other country. For example: If you have J500H model and android 6.0 for J500H is available for some other countries but not in your country than you can download android 6.0 firmware of those countries and flash it through Odin.
Note: The model number of J5 should be same for example you cannot flash J500F firmware to J500H ,
you can only flash firmware of J500H to J500H, countries or area does not matter as long as the
device model is same.
Procedure:
1. Go to the link below and search for firmware for your device. (Eg: Galaxy J500H)
2. You will find firmware for various regions and android version. Download the android 6.0 firmware for your
region. If you don’t get android 6.0 for your region than download android 6.0 available for any region as you
prefer.
3. Download odin from the link below.
4. Backup any necessary things like apps, contacts or files as you may loose them.
5. Now follow the instruction given below and flash android 6.0 to your j5.
PRE-REQUIREMENTS:
Download & Install Galaxy USB Driver on your computer,
Enable USB debugging on your Galaxy J5 smartphone and OEM unlocking.
Your phone battery should be at 80% or above.
How to Install Stock Rom on Galaxy J5
1 . After downloading the Galaxy J5 Firmware and Odin software files from the download section.
2. Extract/unzip both files on your computer.
3. Now, boot your Samsung Galaxy J5 into download mode. To do that turn off the phone, after the phone is off,
press and hold the Volume Down + Home + Power buttons at the same time.
4. Connect your Galaxy J5 to your computer using USB Cable and wait till Odin software detects it. Once, Odin
software detects your phone, you will see the Added message on Odin.
5. Before installing the stock firmware on Galaxy J5 make sure that both Auto Reboot and F.Reset Time are selected.
Then, click on the AP button on Odin software and select the stock Rom where you have previously extracted it.
Now click start button. Odin will start flashing.
6. In the end, on the Odin software the pass message should be displayed and your Samsung Galaxy J5 will
reboot automatically.
7. Congratulation you have upgraded to android 6.0 Marshmallow.
Detailed tutorial for flashing via Odin:
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Downloads:
1. Firmware
http://www.sammobile.com/firmwares/
http://updato.com/firmware-archive-select-model
2. USB driver
https://androidmtk.com/download-samsung-usb-drivers
3. Odin
https://androidmtk.com/download-odin-downloader-versions
Downgrade to Android 5.1.1
Incase if you don’t like android 6.0 and want to downgrade you can downgrade to android 5.1.1 by following these
steps.
1. Download 5.1.1 firmware for your region from the given link.
2. Follow the steps provided in above upgrade tutorial and flash the firmware using the Odin.
Rooting:
For rooting your J5 on Android 6.0 as well as Android 5.1.1 follow these steps.
1. Download the TWRP recovery from the link below.
Android 5.1.1 (Lollipop) ( Thanks @Nick Verse for TWRP recovery)
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
Android 6.0 (Marshmallow) (Thanks @ganesh varma for TWRP recovery)
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j500f-t3416960
2. Download Supersu zip from the link below
https://download.chainfire.eu/696/supersu/
For Marshmallow Users if you are facing bootloop after flashing supersu.zip . Flash the supersu file given in the link below.
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs (Thanks @jka_dark28 for link)
3. Now flash downloaded TWRP via Odin. (Follow the same process to Flash)
4. Transfer supersu zip file to your sd card.
5. After flashing TWRP. Reboot to recovery by pressing and holding Volume Up + Home + Power Button.
6. Now in TWRP select install, locate your Supersu zip file and flash it.
7. Than reboot your device. Congratulation you have rooted your device.
Note: Flashing TWRP and Supersu will void your warranty. So think before you flash. After flashing
TWRP do a nandroid backup first before flashing anything (even supersu file) so that if anything
goes wrong you can restore back.
And most important do everything on your own risk. I will not be responsible to any damage made to your device. But if you follow the process carefully you will not face any problem.
Hope this tutorial will help you all who don't have idea about these things.
Do write your comments and Hit thanks if it helped you.:laugh::good:
thanks for the tutorial!
testing
FOR MM
Wipe data factory reset in LL
Flash done : J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar
Device does not have drk please install drk first ( knox counter =01 ), reboot.
after 15 min device start.
- TWR Working
- Root not workin on MM J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar (Brazil) use this:
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
- For Xposed framework use xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
What did you tried to flash? Is it MM or LL Firmware? And thanx for xposed and root file link.
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
ZemoDroid said:
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
Click to expand...
Click to collapse
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
rjrulz007 said:
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
Click to expand...
Click to collapse
I'm trying to root it.
Just flash twrp via odin. And install supersu zip via twrp. And remember it will void your warranty. One more thing do a nandroid backup before flashing anything.
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Whatisausername said:
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Click to expand...
Click to collapse
You have to enable USB debugging on your Galaxy J5 and OEM unlocking by going into developer Options. To enable developer option go to system, About Phone, and tap Build number 5/6 times. Let me know if you need more help.
.yeah it helped but my phone is stuck at samsung.
Whatisausername said:
I did both however my phone simply does not boot into twrp.. Odin said passed and knox is tripped.
Click to expand...
Click to collapse
Untick the Auto Reboot from the options in Odin and flash the recovery. After flashing finishes,power off the device(by removing battery) and hold [ VOLUME UP+HOME+POWER] to enter into the recovery and swipe to 'allow modifications'. Hope This will help you.
Whatisausername said:
.yeah it helped but my phone is stuck at samsung.
Click to expand...
Click to collapse
Did you flashed anything after installing TWRP recovery, like any zip files?
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Whatisausername said:
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Click to expand...
Click to collapse
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
OK well which partitions should i backup?
Works great, Thanks
Downgrade
Hi All!
If I want to downgrade from 6.0.1 to 5.1.1 via Odin, is it sure, that I need only one AP/PDA file from firmware sites?
Because I remember with an older phone, that if I need to downgrade, it need the other files too - Bootloader, Phone, CSC.
Is it sure that there is no need for them? If it, where can I download them?
Thanks!
Hello mate, I have gone back and forward from LP - MM a number of times.
I have had no problem with it as all.
I just flashed the firmware from from Sam mobile ( there are lots us links through out the ROMs thread)
I have only had to put the file into the AP and flashed no problem.
Just mage sure that the firmware is the correct one for your model
Sent from my Galaxy J5 using XDA Labs
Hey, I have a SM J500F 6.0.1, can I root it the same way as an 6.0 or do I have tobdo anything diferent??
I Suggest that if your device won't pass Samsung logo, put it in recovery mode and Factory Reset.
I Had that issue and i solved it doing that.:fingers-crossed:
Do I need stock recovery to only root my J5?? And will I lose all my data if I root it??
Recently Huawei released the official Marshmallow update for Honor5x. I followed the update from setting but only to be restarted and brought to TWRP recovery without any updates. So, I downloaded the updated manually ( so I can flash via TWRP ) only to find the update is not in .image but .app, which means TWRP won't be able to flash the update.
So I took alternatives to install back the stock recovery from Huawei, which I succeeded and I got back my Huawei Stock Recovery. I then try updating via setting update, it downloaded the update, and installed it via stock recovery. But halfaway updating I got ' System Failed to Update '. I suspect it might have to do with my Cyanogen Mod that I installed 2 months ago.
Any idea how I can update to official Marshmallow?
A_J97 said:
Recently Huawei released the official Marshmallow update for Honor5x. I followed the update from setting but only to be restarted and brought to TWRP recovery without any updates. So, I downloaded the updated manually ( so I can flash via TWRP ) only to find the update is not in .image but .app, which means TWRP won't be able to flash the update.
So I took alternatives to install back the stock recovery from Huawei, which I succeeded and I got back my Huawei Stock Recovery. I then try updating via setting update, it downloaded the update, and installed it via stock recovery. But halfaway updating I got ' System Failed to Update '. I suspect it might have to do with my Cyanogen Mod that I installed 2 months ago.
Any idea how I can update to official Marshmallow?
Click to expand...
Click to collapse
Download latest firmware on a PC, use huawei update extractor to extract boot, system, Cust and recovery images.
Flash them in fastboot mode and then do a forced update.
(UPDATE.APP in dload folder in root of SD, turn off phone, press and hold power + vol up + vol down until boot)
YOU WILL LOSE ALL YOUR APPS AND DATA so make a backup before doing this.
muradulislam said:
Download latest firmware on a PC, use huawei update extractor to extract boot, system, Cust and recovery images.
Flash them in fastboot mode and then do a forced update.
(UPDATE.APP in dload folder in root of SD, turn off phone, press and hold power + vol up + vol down until boot)
YOU WILL LOSE ALL YOUR APPS AND DATA so make a backup before doing this.
Click to expand...
Click to collapse
Do I need to flash all 4 of them? I've flash the boot image and when I tried to flash the other files it gave me' size of image is larger than target devices '
A_J97 said:
Do I need to flash all 4 of them? I've flash the boot image and when I tried to flash the other files it gave me' size of image is larger than target devices '
Click to expand...
Click to collapse
Yep, you need to flash all and as I don't know anything about this error so I can't help you more. Sorry...
I have the same problem .
Waiting for any body to help
saifooon said:
I have the same problem .
Waiting for any body to help
Click to expand...
Click to collapse
What are the exact steps you made?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
What are the exact steps you made?
Click to expand...
Click to collapse
Error in 20% while updating
After that
I copied the update.zip in sd dload folder and try to local update but the same error .
saifooon said:
Error in 20% while updating
After that
I copied the update.zip in sd dload folder and try to local update but the same error .
Click to expand...
Click to collapse
Have you rooted your phone before?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Have you rooted your phone before?
Click to expand...
Click to collapse
Yes and I installed official B140 and im back to stock .
saifooon said:
Yes and I installed official B140 and im back to stock .
Click to expand...
Click to collapse
Looks like stock refuses to receive OTAs if there is a root history.
Sent from my Galaxy Tab 3 using XDA Labs
So how can we solve this problem
Or there is any way to cleat this history ?
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
adriansticoid said:
Looks like stock refuses to receive OTAs if there is a root history.
Click to expand...
Click to collapse
saifooon said:
So how can we solve this problem
Or there is any way to cleat this history ?
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
Click to expand...
Click to collapse
Maybe by flashing full images in fastboot.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Maybe by flashing full images in fastboot.
Click to expand...
Click to collapse
Any links please and thanks alot for your efforts :good:
Any ideas here
saifooon said:
Any ideas here
Click to expand...
Click to collapse
Download you phone's stock firmware(refer to the file depot thread). After that, use Huawei Update Extractor and extract the files in update.app, you should get system.img, recovery.img, boot.img and flash them all using fastboot.
Sent from my Galaxy Tab 3 using XDA Labs
Android 10 was released today for Galaxy M30 (INS) ,
Here i am posting 2 links
1. For users Who Just Want Stock Rom as it is
2. For Users Who Need rooted stock rom
Steps :
1. Download Zip and Extract
2. For without root users just flashing via odin would be enough
3. Progress if you wana root
4. when your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
10. now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
11. Wipe Data in stock recovery and reboot and your good to go
So Here's a Grive Link
Both Firmwares need to be extracted and flashed via odin
Unrooted Stock Firmware
Stock Unrooted
Magisk Rooted
Magisk Rooted
XDAevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware and Rooted (M305FDDU3CSL4), ROM for the Samsung Galaxy M30
Contributors
Er. Aditya
ROM OS Version: Android 10
Thanks to ,
Samsung For Firmware
topjohnwu for magisk
reserved just in case
last one
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
shrmp said:
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
Click to expand...
Click to collapse
unzip the zip file and there u will find these files
AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
in odin on your right you will find slots to select files
under BL choose BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
under AP choose AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
under CP choose CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
under CSC choose HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
make sure ur phone is in download mode and you have your drivers installed
I see, does updating with Odin erase userdata?
---------- Post added at 22:05 ---------- Previous post was at 21:08 ----------
Nevermind, I just tried flashing the update but it does not work with the SM-M305M variant. Back to waiting...
Er. Aditya said:
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
Click to expand...
Click to collapse
But, in Magisk here, it states:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Will it be any issues, if we just flash the AP?
Thanks. Flashed Magisk now.
Can i simply falsh it with twrp??
i did everything correctly i'm stuck on Samsung Boot Logo
help
zer0C00L...... said:
i did everything correctly i'm stuck on Samsung Boot Logo
help
Click to expand...
Click to collapse
these steps have been tested alot of times so make sure you dont miss any
Prxtek said:
Can i simply falsh it with twrp??
Click to expand...
Click to collapse
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
Er. Aditya said:
these steps have been tested alot of times so make sure you dont miss any
Click to expand...
Click to collapse
By any chance you have a list of bloatwares to remove?
vdbhb59 said:
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
By any chance you have a list of bloatwares to remove?
Click to expand...
Click to collapse
with root you can simply use titanium backuo and remove according to you
Er. Aditya said:
with root you can simply use titanium backuo and remove according to you
Click to expand...
Click to collapse
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
vdbhb59 said:
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
Click to expand...
Click to collapse
thats google preload stuff but happens just once , i havent faced this issue yet between make a list of apps your removing il take a look
and il work on a debloated version once i get some time
Please upload to one of the alternative sites (google quota block)
Whats the deal with U3, U4, U5 and greater version of bootloaders with Exynos chipset?
I know Samsung has locked bootloaders of USA snapdragon variants, but can all exynos chip-set ones be unlocked?
Or till U2 bootloader can be unlocked and can have root but above U3 cannot be rooted?
It's so confusing, Please someone Help me
Posted for the latest Patched Magisk here: https://forum.xda-developers.com/ga...d-firmware-t4026819/post81336955#post81336955
---------- Post added at 01:52 ---------- Previous post was at 01:52 ----------
For guides: https://forum.xda-developers.com/galaxy-m30/how-to/guide-galaxy-m30-recovery-edl-modes-t4020231
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
kesleyf said:
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
Click to expand...
Click to collapse
Can be used. However ensure you have mounted system.
You may lose data due to that. So ensure to have a backup.