Android 10 was released today for Galaxy M30 (INS) ,
Here i am posting 2 links
1. For users Who Just Want Stock Rom as it is
2. For Users Who Need rooted stock rom
Steps :
1. Download Zip and Extract
2. For without root users just flashing via odin would be enough
3. Progress if you wana root
4. when your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
10. now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
11. Wipe Data in stock recovery and reboot and your good to go
So Here's a Grive Link
Both Firmwares need to be extracted and flashed via odin
Unrooted Stock Firmware
Stock Unrooted
Magisk Rooted
Magisk Rooted
XDAevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware and Rooted (M305FDDU3CSL4), ROM for the Samsung Galaxy M30
Contributors
Er. Aditya
ROM OS Version: Android 10
Thanks to ,
Samsung For Firmware
topjohnwu for magisk
reserved just in case
last one
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
shrmp said:
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
Click to expand...
Click to collapse
unzip the zip file and there u will find these files
AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
in odin on your right you will find slots to select files
under BL choose BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
under AP choose AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
under CP choose CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
under CSC choose HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
make sure ur phone is in download mode and you have your drivers installed
I see, does updating with Odin erase userdata?
---------- Post added at 22:05 ---------- Previous post was at 21:08 ----------
Nevermind, I just tried flashing the update but it does not work with the SM-M305M variant. Back to waiting...
Er. Aditya said:
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
Click to expand...
Click to collapse
But, in Magisk here, it states:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Will it be any issues, if we just flash the AP?
Thanks. Flashed Magisk now.
Can i simply falsh it with twrp??
i did everything correctly i'm stuck on Samsung Boot Logo
help
zer0C00L...... said:
i did everything correctly i'm stuck on Samsung Boot Logo
help
Click to expand...
Click to collapse
these steps have been tested alot of times so make sure you dont miss any
Prxtek said:
Can i simply falsh it with twrp??
Click to expand...
Click to collapse
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
Er. Aditya said:
these steps have been tested alot of times so make sure you dont miss any
Click to expand...
Click to collapse
By any chance you have a list of bloatwares to remove?
vdbhb59 said:
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
By any chance you have a list of bloatwares to remove?
Click to expand...
Click to collapse
with root you can simply use titanium backuo and remove according to you
Er. Aditya said:
with root you can simply use titanium backuo and remove according to you
Click to expand...
Click to collapse
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
vdbhb59 said:
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
Click to expand...
Click to collapse
thats google preload stuff but happens just once , i havent faced this issue yet between make a list of apps your removing il take a look
and il work on a debloated version once i get some time
Please upload to one of the alternative sites (google quota block)
Whats the deal with U3, U4, U5 and greater version of bootloaders with Exynos chipset?
I know Samsung has locked bootloaders of USA snapdragon variants, but can all exynos chip-set ones be unlocked?
Or till U2 bootloader can be unlocked and can have root but above U3 cannot be rooted?
It's so confusing, Please someone Help me
Posted for the latest Patched Magisk here: https://forum.xda-developers.com/ga...d-firmware-t4026819/post81336955#post81336955
---------- Post added at 01:52 ---------- Previous post was at 01:52 ----------
For guides: https://forum.xda-developers.com/galaxy-m30/how-to/guide-galaxy-m30-recovery-edl-modes-t4020231
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
kesleyf said:
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
Click to expand...
Click to collapse
Can be used. However ensure you have mounted system.
You may lose data due to that. So ensure to have a backup.
Related
Hello everyone I have flashed (SM-G750A Galaxy Mega 2 AT&T) with lover firmware (G750AUCU1ANI1) and phone got flashing failed now phone shows ( firmware upgrade encountered an issue. Please select recovery mode in Kies & try again . I also tried with Kies but, kies also downloads the same firmware I have tried to flash
Before flashing phone has this firmware (G750AUCU2AOEA 4.4.4)
Now kindly I need one of the following firmware or any other way to fix this phone
G750AUCU2AOEA 4.4.4
G750AUCU3AOFA 4.4.4
G750AUCU3BOH4 5.1.1
I spend much time on searching these firmware but failed
kindly Help me
Regards !!!
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
designgears said:
Boot into download mode, use the OEM usb cable and flash the proper firmware using odin.
Click to expand...
Click to collapse
sir the phone was ok fully working i just tried to flash using Odin
i have just found this firmware (G750AUCU1ANI1) and while starting flash ..got failed
I have tried ur method boot into download mode and find proper firmware and flash using method but, the problem is that I couldn't find any firmware rather than (G750AUCU1ANI1)
Brother i guess i have what u need pcsolutionswh gmail
Any1's able to share an ADB dump or the whole 5.1.1 firmware? :highfive:
Conejo503 said:
Brother i guess i have what u need pcsolutionswh gmail
Click to expand...
Click to collapse
like what and how?
Please system dump!!!
Any1 can post the full 5.1.1 system dump??
Kernel 5.1.1
Would some1 be nice and upload the boot.img only
Thx in advance :highfive:
Only boot.img 5.1.1 G750A
Anyone can put it the boot.img of 5.1.1 G750-A that it contains the kernel to can be ported to N7100/I9300 :highfive::highfive:
---------- Post added at 11:21 PM ---------- Previous post was at 10:53 PM ----------
Here is a topic that people have this phone and they can send boot.img 5.1.1
http://forum.gsmhosting.com/vbb/f684/problem-connecting-sm-g750a-mega-2-a-2017889/
For example the user headszone1 have G750-A updated to 5.1.1 he can give the boot.img
The Galaxy Note 3 Neo SM-N7505 has received 5.1.1 TW
Galaxy Note 3 Neo SM-N7505 has received Lollipop 5.1.1 Touchwiz N7505POUDOK2 2 days ago. The boot.img (KERNEL) from this firmware can be ported to S3/N2?? This device has an Exynos 5260 Hexa-Core with a Mali T-624 graphics card. I want know if this kernel can be ported.
Thank you for your advice.
Have a nice day.
Anyone know if Exynos 5260 5.1.1 can be ported to Exynos 4412 ??
Here is the firmware but it is payment G750A 5.1.1
http://www.dlgsm.com/index.php?dir=...Files)/Model_G/G750A_(SM-G750A)/G750AUCU3BOH4
I have the solution for Samsung G750A, write in private.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
PM sent :highfive:
PM sent.
Have a nice day.
thedjedgar said:
I have the solution for Samsung G750A, write in private.
Click to expand...
Click to collapse
Androidwizzard said:
PM sent :highfive:
Click to expand...
Click to collapse
pepelino123 said:
PM sent.
Have a nice day.
Click to expand...
Click to collapse
So far seemingly just a joke on serious interests
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Galaxy Mega 2 lollipop Firmware download link [ G750AUCU3BOH4 ]
Androidwizzard said:
Any1's able to share an ADB dump or the whole 5.1.1 fi
http://clangsm.com/ftpdemo/index.ph...Android/SM-G750A Samsung Galaxy Mega 2 (AT&T)
http://www.dlgsm.com/index.php?dir=/FLASH-FILES/Samsung-Flashfiles/Samsung_Official_firmwares_
http://www.romup.com/roms/11852
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Hello Bro, I needed your help.
Click to expand...
Click to collapse
Nucklez said:
I just bricked my 5.1.1 G750A by using Kingroot, then a script failed when attempting to uninstall Kingroot to replace it with SuperSU. Root appeared to stick after the script failed, and I was even prompted by SuperSU to allow root to Titanium. I tried to reboot to see if root would stay, and am now stuck in a boot loop. I get the ATT logo for a few seconds, then reboot again. I've tried Kies to reinstall and it wants to install 4.4.4 in Firmware Upgrade mode, which fails. I can't get Emergency firmware recovery in Kies to ever show my device while it is in download mode or recovery mode. I then found the only stock firmware to download which is UCU1ANI1 and that fails Odin with "Invalid Magic String." I'm guessing this is all because I can't find a 5.1.1 (or even close) firmware. So, I too am looking for this elusive 5.1.1 firmware, and using an old gimp S4 until I can get this Mega 2 back up and running.
Click to expand...
Click to collapse
Have you tried using Samsung Smart Switch to repair your firmware? You have to input your serial number in order to be able to download it. Try it and see if it works.
I just tried Smart Switch. It did as you suggested and said it was an incompatible device. So I put in my model/serial number. It still tries to install 4.4.4. It fails after it attempts to install with the following error on the phone in download mode:
"SW REV. CHECK FAIL DEVICE: 3. BINARY: 1" Why does Kies and Smart Switch try to install 4.4.4 instead of 5.1.1?
Next question, of those sites above. Would you guys recommend them at all? Are the files legit? Looks like the cheapest one would be $25 US to get 5.1.1.
TWRP FOR ALL SM-G318 SERIES( like SM-G318H or SM-G318MZ or SM-G318HZ )
All credit goes here : http://www.phonandroid.com/forum/galaxy-ace-4-neo-sm-g318h-t142379.html
Press THANK Button if it work for u :good:
(IMPORTANT)Before doing anything u need to:
-HAVE EXACT SAME MODEL (SM-G318 Series Line-up Model) and TO BE ROOTED.
The only way to get root is by flashing the Pre-rooted Firmware by Andro-Man: https://forum.xda-developers.com/android/development/pre-rooted-firmwares-samsung-sm-g318hz-t3230844
Warning!
if u have latest stock rom with "ASKS Security"....before doing any root method,pls downgrade to the older version of stock rom.
How to know if u have "ASKS Security" installed ?
-Go to Settings > About Phone > Find "ASKS Security Version"
If dont have it then u are on the old version of stock rom and can do any root method without any problem.
it is because if u do that u will get stuck on Logo when u boot for example "Galaxy V Plus" because i have sm-g318hz device.
i have experience this problem when i try flashing prerooted rom when i have "ASKS Security" installed on my sm-g318hz.
-Have the USB drivers installed on your computer.
-Have all File Requirement given
-Have a charged battery over 70%.
-Make a backup of your personal data.(Optional just incase)
I DONT RESPONSIBLE FOR ANY DAMAGE TO UR PHONE!! DO IT AT UR OWN RISK !!!!
File Requirement :
For Method 1 (via PC):
Odin : http://androidhost.org/wZgTz
TWRP Recovery : https://drive.google.com/file/d/0B-lRrn2nKLf4TW9iWHNaOXI5bjA/view?pref=2&pli=1
For Method 2 (without PC):
RASHR Flash tool: https://www.apk4fun.com/apk/925/?_e_pi_=7,PAGE_ID10,2769102785
TWRP Recovery: https://mega.nz/#!4NJBDbiB!PXQZ9YYfmo7cb-3zV11Eww7y4bXeFgoV7s8Mn8uNcz4
Method 1:
Installing TWRP Recovery (via PC):
1. Turn off your smartphone.
2. Execute the file Odin3_v3.10.06.exe contained in the unzipped folder.
3. Make sure you have only Auto Reboot and F. Reset Time of checked.
4. Select AP then choose twrp.tar file
5. On your smartphone, press and hold down the Volume Down + Home + Power and Volume Up to restart your smartphone into download mode.
6. Connect the smartphone to the computer with the USB cable of origin. The box below ID: COM should be colored.
7. Click Start to begin the installation.
8. Wait for the installation and do not touch anything until u see Green Light *PASS*
9. Wait for the installation and do not touch anything. Your smartphone automatically restart.
10. Turn Phone ur phone back.
11. Press Power button + Press Volume up button + Home Button to boot into recovery. Release ur finger after u see *Samsung Galaxy *
12. Ignore the message and swipe to right on slider given
13. That it now u have TWRP Recovery installed on your phone :fingers-crossed:
Example Picture for Instruction: http://www.hostingpics.net/viewer.php?id=170738212.jpg
Method 2:
Installing TWRP (without PC):
*If Method 1 is not working try this method.
1. Install RASHR Flash tool.
2. Put recovery.img into root External SD Card.
3. After that open the RASHR Flash tool and select Recovery From Storage.
4. Find and select the recovery.img
5. If the dialog appear press Yes and then reboot into recovery.
6. Wait for few second to reboot into recovery and u have TWRP installed
Nice!??? BTW! It's "TEAM" not "TWIN" ?
xAthenax said:
Nice!������ BTW! It's "TEAM" not "TWIN" ��
Click to expand...
Click to collapse
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
thnks dev for the recovery. any rom for this phone????
Kikaa99 said:
Sorry for that mistake i never notice that
Thanks for trying my project :good:
This is my first post anyway. So what phone model are you using ?
Click to expand...
Click to collapse
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
guvey said:
thnks dev for the recovery. any rom for this phone????
Click to expand...
Click to collapse
What's the model of your phone? I can search it
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
sm-g318ml
For now , they are still no dev working on custom rom for this model (SM-G318 Series) .
i have try some Galaxy V (SM-G313Hz) custom rom but then i got stuck on boot screen .
i know someone that made a Prerooted stock rom for (SM-G318 Series). u can google it or just search the thread in xda.
xAthenax said:
SM-G313HZ it's Samsung Galaxy V
---------- Post added at 06:11 AM ---------- Previous post was at 06:07 AM ----------
What's the model of your phone? I can search it
Click to expand...
Click to collapse
wow i though it only work for SM-G318 Series only ?
this is impossible ??
guvey said:
sm-g318ml
Click to expand...
Click to collapse
Unfortunately I can't find any custom Roms for your phone
it does not mater what phone model we have.if u found custom for that phone like *Cyanogenmod 12 for SM-G318ML* it also can be apply to all SM-G318 phone series like i mention in my top post.
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
pipyakas said:
@Kikaa99 i flashed twrp.tar in odin, it said success but when i try to reboot to recovery i only get the stock recovery
can you help
Click to expand...
Click to collapse
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Kikaa99 said:
Did you follow the steps carefully ?
Most people getting this worked....
Did you try any custom recovery before ?
I want you to reflash the recovery again.
Click to expand...
Click to collapse
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
pipyakas said:
I tried to reflash a couple of times, but it didnt work
Then i flash a pre-rooted firmware, extract the recovery.img and flash it via flashfire, then i got twrp
Now that i got a way to get root + twrp everything is fine but not the way i thought though
Click to expand...
Click to collapse
Glad to hear that mate
Guys, pls share this post to all SM-G318 User :good:
Sharing is caring
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Adlxcrash said:
Hi guys! Anyone having troubles with wifi? It just doesn't turn on...model sm-g318
Click to expand...
Click to collapse
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Kikaa99 said:
do u having this problem after try this tutorial ?
and what actually ur phone model ?
i mean we have a lot sm-g318 series (like SM-G318HZ OR SM-G318MZ)
Click to expand...
Click to collapse
Thanks but I gave up... I think it must be a hardware problem .... twrp works excellent so.. it may be another thing like wifi module in the board... thanks anyway mate!
Works on SM-G318ML?
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
NecroMacro said:
Hi I have a question, does it work for the SM-G318ML?
*Sorry my english is very bad xD
Click to expand...
Click to collapse
Root worked for me, so TWRP should work too.
Enviado de meu SM-A9000 usando Tapatalk
I have SM-G318HZ
I follow your instruction in ODIN
but twrp is not installed.
it still gives me the stock recovery.
any idea?
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
OK.. suppose now I unlocked the bootloader... wat should I do to flash twrp and root the phone.. should I just flash tarp and supersu or should I need to flash anything else... please help me step by step after unlocking bootloader...
follow lolipop unlock process Replace emmc_appsboot.mbn in dev rom and flash via mi flash done,
fastboot oem unlock-go
fastboot flash recovery recovery name.img
then flash radon latest marshmallow version and then flash supersu 2.76 done, its work for me,
$lim $hady said:
I am about to unlock the bootloader but im confused about the TWRP flashing...
I went through the newbie guide and see that we have flash Universal Boot Img Patcher (UBP) after flashing MIUI Recovery ROM Zip
I am confused about the MIUI Recovery ROM Zip... Which ROM is that.??
I am currently on MIUI Global 8.0 Stable (8.0.6.0). Can i just unlock bootloader and flash TWRP and Supersu
Please someone help me with step by step guide to unlock and root this phone...(Unlocking Moto seems easy)
Click to expand...
Click to collapse
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://forum.xda-developers.com/redm...459382/page330
[email protected] said:
This may give you method for rooting...
And for installing cm13 ROM too... With proof...
It worked for me .. I did the same...
First
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B81...w?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
any rom could be installed after it by the same proccess.
you would beome comfortable in doing all this after once trying/.
if you even brick your phone there would always be a way out.
search it on youube.
because everything occurs in partitions , you think hat you have bricked but actually not. there's always a safe way out
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
Do the above method till rooting and installing TWRP.
If you want to install cm14.1 for redmi note 3:
Follow this thread:
http://.xda-.com/redm...459382/page330
Click to expand...
Click to collapse
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
XN Logos said:
How we can flash twrp without unlocking bootloder as you sat, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
[email protected] said:
Both can be done.
Vice versa is also possible.
OK then click unlock bootloader first and then flash twrp.
The reverse can also be done. I did the reverse and I was amazed so thought I should as this to my tutorial
Click to expand...
Click to collapse
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Sorry I accidently removed the link.
I also deleted my review video of YouTube .
I will upload it and get you the link
---------- Post added at 11:08 AM ---------- Previous post was at 11:03 AM ----------
Sorptarn said:
1. bro drive link you provided say file does not exist..............
2. do we have to follow all your steps every time for flashing rom???
Click to expand...
Click to collapse
Once unlocked bootloader and flash twrp.
You don't have to take help of PC or any other thing.
You can always do it on the phone itself.
Boot into twrp by pressing upper volume and power button.
Wipe everything except storages (internal or external)
And then install the ROM zip file and gapps file accordingly.
Do it for any rom
---------- Post added at 11:20 AM ---------- Previous post was at 11:08 AM ----------
Wait uploading the file...
---------- Post added at 11:26 AM ---------- Previous post was at 11:20 AM ----------
Bro file uploaded.
Take it and enjoy.
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
---------- Post added at 11:29 AM ---------- Previous post was at 11:26 AM ----------
XN Logos said:
How we can flash twrp without unlocking bootloder as you say, first flash twrp then unlock Bootloader it's Not posible,
Click to expand...
Click to collapse
New link updated for root files
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Sorptarn said:
@[email protected] bro ye global stable miui8 lp mein kaam krega na.............
Click to expand...
Click to collapse
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
[email protected] said:
any rom can be install from phone through twrp directly but this is for rom other than miui.
if you install the global stable miui 8 official then its gone. your phone will brick. the bootloader, since is unofficially unlocked, your phone would stuck at mi logo.
now if you wanna install miui rom without any such kinda loss, you see this video: the madthing he explained everything.
download a patched miui 8 rom that will support unofficially unlocked bootloader and will not cause any problem. and it supprts volte too.
or if you want the real miui 8 global rom back . this has to be done by pc.
Install miui 8 patched directly from twrp recovery. [easy one with extra features and safe and volte supported]
https://www.youtube.com/watch?v=B1U1T5gBzbI
Or install the stable miui 8 global offiical rom by pc method. doing everything again. [hard one, success not guaranteed but mostly works. follow each step correctly]
https://www.youtube.com/watch?v=YijIOh9b3mY
his would definetly help you.
do give a thumbs up if you found it helpful
Click to expand...
Click to collapse
Thnx fr the update..........
Bt was asking that im currently on miui 8 stable lp........ Th unlock krne k lie miui dev rom th flash nhi krni......
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
[email protected] said:
First try this the process I have suggested and given instructions. If any problem comes I would help.
It can alone unlock bootloader. No need to install global kenzo ROM.
I would help just text me
Click to expand...
Click to collapse
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
abihary said:
you can try to unlock directly at your current stable rom, somebody able to do it while i can't do it and should move to dev rom to unlock.
if you failed to do it at current rom, you can move to dev rom using miflash and ofc using fastboot rom. if you should move to dev rom to unlock, choose LP rom since MM rom have forced encryption feature by default.
Click to expand...
Click to collapse
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
$lim $hady said:
Thank you... I tried to unlock it on global stable rom but not able to do it(stuck a 50%)
Can i just download and 6.9.15 global developer rom and flash it using updater and try unlocking the bootloader or is it necessary to flash fastboot rom only.
If yes, please provide the link for lollipop fastboot rom
Click to expand...
Click to collapse
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
abihary said:
better go to global dev LP to avoid problem with data encryption at global dev MM.
you can download it from this link
Click to expand...
Click to collapse
Thanks for the link. Downloading it now..could you please provide the steps to flash this file or a link which helps in flashing fastboot rom...
once i have flashed, just unlock it and flash twrp and supersu.
Any other steps to flash cm 13 or 14..??
$lim $hady said:
Tried to unlock bootloader, but the stuck at 50% saying unable to verify device something.. so tried logging into micloud and making hte device active.
Will try it today.
So after unlocking bootloader, just flash TWRP using adb commmands and flash SuperSU??
Click to expand...
Click to collapse
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
[email protected] said:
Yeah
Click to expand...
Click to collapse
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
[email protected] said:
Yeah
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
If you do it by installing global dev kenzo ROM by mi flash then it may get stuck at 50-60℅ as happened to many here.
I have also experienced it. It got stuck at 40℅. It may happen.
It can say not enough memory to continue or whatever ****.
Leave it don't panic. The ROM has partially been installed.
Now cmtry power off. Or click on boot edl mode. Now directly click unlock bootloader .bat file which I provided. And then click on flash twrp. Bat file.
You phone will automatically boot into twrp and now go last tab of last second row, got to globe icon and change language and now go back and wipe everything.
No wiping internal storage if you have kept any ROM there. But I suggest wipe everything.
Insert a micro SD card or USB otg containing any ROM (because you need to boot up at least) and then flash it along with proper gapps.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
You phone will boot up and now if you want you can go again to twrp and install a proper ROM of your choice. Or if you want stay there. Boot loader unlocked twrp flashed and everything done.
Click to expand...
Click to collapse
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
$lim $hady said:
Thanks but i don want to unlock it unofficially.. unless its not possible to unlock it officially..
Click to expand...
Click to collapse
Wait for 1 or 2 weeks then.
And not sure whether it will accept your request or not. OK .
Welcome
Hi Everyone,
With all of the hype around the Exynos phone its finally time for the TGY/CHC Snapdragon variants to get some attention.
No this won't work with US variants, please don't ask. This is tested on my normal s10 (SM-G9730). I'm not sure if the s10+ would work.
I've worked with a few key people to get this working. So credit goes to Flatty, Ianmacd and the creators of tomatolei rom.
This setup will let the user do the following:
-Boot/Restart phone without holding any odd button combos to boot into rooted rom.
-Hold the recovery buttons to get into TWRP.
-Not having to worry about losing root when restarting if you forget to hold your buttons, you don't need to hold anything once properly setup.
The following steps below will help you achieve a stock rom with TWRP:
1. You must be on stock rom, ideally non rooted. If you are rooted, flash your stock rom (The rom version is important, this was completed using the ASH2 version of the TGY firmware.) using ODIN (CSC HOME).
2. Once flashed boot into android and ensure OEM unlocking is enabled in developer settings.
3. Boot to download mode by turning the phone off, then press and hold the volume down button along with the Bixby key just beneath it, then press and hold the power button.
4. Flash attached TWRP from download mode. (This led my phone to boot looping). https://www.mediafire.com/file/cg8bcrf78v66v8j/LatestTomato.tar/file
5. Flash the second attached TWRP (you may have to restart and re-enter download mode again). (I believe the above flash is required too, as it likely contains vendor info). https://www.mediafire.com/file/21akg54uxqk3eix/G9730_TWRP_3.3.1-1_tomatolei-0831-v4.0.tar/file
6. Reboot phone to recovery mode (Volume up, bixby and power upon restart) which will now boot you to TWRP.
7. Flash Snapdragon muti disabler from TWRP. https://www.mediafire.com/file/opbsc7wrcr69b2v/multidisabler-samsung-1.6.zip/file *Per @FlatOutRU After flashing multidisabler you must Wipe Data (if you didn't do that before with twrp - Thanks for the clarification.
8. Boot to your rom and ensure all is well.
9. Feel free to download the latest Magisk zip and flash root from TWRP by using the recovery mode button sequence upon restart.
Sidenote: The G9730_TWRP_3.3.1-1_tomatolei-0831-v4.0.tar and tomatolei ROM also let me install PHH AOSP and PHH LineageOS
PHH AOSP microG: https://forum.xda-developers.com/pr...arm64aosp-9-0-0r21-microg-ufofficial-t3878115
PHH LineageOS: https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Hopefully this gets a few nice Stock ROMs being produced.
Download links are added.
Fznwolf: congrat for this thread, well explained.
some question:
1) what's bring latestomato.tar ? , because no need this for me
2)magisk work for you even if you don't flash magisk_patched.tar?
3)are you able to make backup into twrp because for me it's failed. i think it work if use tomato rom but i prefer stay to tgy rom
pixiebob said:
Fznwolf: congrat for this thread, well explained.
some question:
1) what's bring latestomato.tar ? , because no need this for me
2)magisk work for you even if you don't flash magisk_patched.tar?
3)are you able to make backup into twrp because for me it's failed. i think it work if use tomato rom but i prefer stay to tgy rom
Click to expand...
Click to collapse
Thanks for the compliment @pixiebob
1) I believe the latestomato.tar has some pieces of tomato rom that allow for booting.
2) Yes, i didnt use magisk_patched.tar. I used the official magisk zip after all of my original steps as the last step.
3) I have several backups, I'm on TGY. Try start from scratch and follow my above steps using a TGY rom. Sounds like you may need to wipe and start over using the original steps provided, make sure to use the multidisabler originally attached.
Fznwolf said:
Thanks for the compliment @pixiebob
1) I believe the latestomato.tar has some pieces of tomato rom that allow for booting.
2) Yes, i didnt use magisk_patched.tar. I used the official magisk zip after all of my original steps as the last step.
3) I have several backups, I'm on TGY. Try start from scratch and follow my above steps using a TGY rom. Sounds like you may need to wipe and start over using the original steps provided, make sure to use the multidisabler originally attached.
Click to expand...
Click to collapse
you are right once multidisabler attached to your first post is installed i'm able in Twrp to backup ending without error, fantastic
pixiebob said:
you are right once multidisabler attached to your first post is installed i'm able in Twrp to backup ending without error, fantastic
Click to expand...
Click to collapse
Great to hear it's working out.
Once we root and install twrp, how we can update the phone ?
Otherwise, thanks for your work !
Yay dude thanks for using my instruction and my modified zips without asking me first
You've got an attempt before - trying to post my 9730 overlay for AOSP
Fznwolf said:
I've worked with a few key people to get this working. So credit goes to Flatty, Ianmacd and the creators of tomatolei rom.
Click to expand...
Click to collapse
No, you didn't work with other people. You just spammed me ,my pm here and in telegram to get explanation and posted it here without permission
You've also forgot one important step. After flashing multidisabler you must Wipe Data (if didn't do that before with twrp)
Multidisabler - i've just changed a few lines in @ianmacd code to get it working on our Snapdragon variant.
Twrp.tar - extracted boot.img and recovery.img from @tomatolei ROM for S10+ 9750
Thanks again @FlatOutRU I've updated the initial description to include the wipe after the muti-disabler flash as per your comments.
Hopefully this allows more work to be done on the Snap s10s!
FlatOutRU said:
Yay dude thanks for using my instruction and my modified zips without asking me first
You've got an attempt before - trying to post my 9730 overlay for AOSP
No, you didn't work with other people. You just spammed me ,my pm here and in telegram to get explanation and posted it here without permission
You've also forgot one important step. After flashing multidisabler you must Wipe Data (if didn't do that before with twrp)
Multidisabler - i've just changed a few lines in @ianmacd code to get it working on our Snapdragon variant.
Twrp.tar - extracted boot.img and recovery.img from @tomatolei ROM for S10+ 9750
Click to expand...
Click to collapse
Thank you, it works perfectly.
what Magisk version do you use ?
Is it working with magisk v20 ?
Vuska said:
what Magisk version do you use ?
Is it working with magisk v20 ?
Click to expand...
Click to collapse
I'm on 19.3, I don't see why 20 wouldn't work.
Fznwolf said:
I'm on 19.3, I don't see why 20 wouldn't work.
Click to expand...
Click to collapse
Not work in G9750 ... dont know why...
Sent from my SM-G9750 using Tapatalk
When you say flash (with only stock recovery installed) do you mean with Odin? Which boxes in odin would this tar files go to (e.g. AP, boot?). My phone is s10+ 9750. has it been tested on that? thanks a lot.
Any chance for 9700 (s10E) support?
NisseGurra said:
Any chance for 9700 (s10E) support?
Click to expand...
Click to collapse
Lets consider my method superseded by https://forum.xda-developers.com/s1...p-3-3-1-v3-t3980463/post80569455#post80569455
Thank you @Mentalmuso
heavenly86 said:
When you say flash (with only stock recovery installed) do you mean with Odin? Which boxes in odin would this tar files go to (e.g. AP, boot?). My phone is s10+ 9750. has it been tested on that? thanks a lot.
Click to expand...
Click to collapse
This would be AP, please use https://forum.xda-developers.com/s1...p-3-3-1-v3-t3980463/post80569455#post80569455
Vuska said:
Not work in G9750 ... dont know why...
Sent from my SM-G9750 using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/s1...p-3-3-1-v3-t3980463/post80569455#post80569455 will work.
Fznwolf said:
I'm on 19.3, I don't see why 20 wouldn't work.
Click to expand...
Click to collapse
Please do not use 20, it is not found to be working. Stick with 19.3.
Any luck on the 975U. I have e an unlocked VZW 975U running Android Q
Blackweiser35 said:
Any luck on the 975U. I have e an unlocked VZW 975U running Android Q
Click to expand...
Click to collapse
I see no one's responded to you in the last few days, probably because the OP says to not bother asking if it works with US variants. No there's no known way to get root on one of the 97_U variants. The bootloader is locked, and it would take a miracle to bypass that.
Cannot use Dex for PC function.
Could you upload tomatolei's twrp v6, which updated the kernel to support the Dex funtion? Many thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
unofficial TWRP 3.5.0 for SM-N986x Snapdragon
*** This will only work on Snapdragon devices with an unlocked bootloader, but is technically compatible with all snapdragon Note 20 Ultra devices.
SM-N9860 - SM-N986U/U1
Telegram thread
Built using OMNI source 10.0
TWRP v3.5.0
See post #2 for install steps
Changelog...
3.4.0-1
Initial build
MTP, OTG and SDcard all working
Encryption not working
3.4.0-2
Fixed brightness
Updated kernel
3.5.0-11
* Android R only
* If you are using any other version of twrp for R, I would update. Same with kernel.
Updated twrp to latest bleeding edge
Fastboot now functional in twrp
Keyrefuge and keystore now wipeable
TWRP Downloads
TWRP 3.5.0 Downloads
WETA Kernel Downloads
OrangeFox Downloads
SkyHawk Downloads
Forced Encryption Disabler (included in TWRPx)
Telegram thread
--------------------->
Beer fund
XDA:DevDB Information
TWRP Note 20 Ultra (snapdragon), Kernel for the Samsung Galaxy Note 20 Ultra
Contributors
Mentalmuso, mentalmuso
Source Code: - Kernel Source | Device tree c2q | Device tree c1q
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.4.0-1
Created 2020-09-08
Last Updated 2020-09-08
Instructions
* Unlock bootloader - Enable dev settings, switch the oem unlock switch, boot into download mode, hold the
volume up button, confirm unlocking.
* Be aware, first clean boot, hangs on building cache, hard reboot after waiting about 3min and you'll boot past this
* If simply updating your existing TWRP, you only need to flash the TWRP.img in recovery.
Process from bone stock (TH* firmware)
1. Boot into stock recovery, and perform a factory reset before flashing TWRP
2. Boot into Download mode, Flash TWRP.tar in AP slot in Odin (uncheck autoreboot)
3. Reboot directly into TWRP (hold vol+ and Bixby)
4. Format data, reboot recovery (format, not wipe. You will be asked to type "yes" if you have done it right)
5. Flash kernel img in twrp.
6. Flash encryption disabler.
7. Flash Magisk.
8. Reboot system (first boot may hang on samsung boot animation, hard reboot to kick it on)
Process from existing TWRP
1. Flash TWRP.img to recovery partition from within TWRP
2. Reboot system
Telegram thread
--->
USA stuff
I personally own the SM-N9860 device. I successfully converted the csc region to USA (tmobile) by doing the following.
1. Created a .tar of super.img from TH3 SM-N986U1 firmware (AP)
2. Created a .tar of prism.img.lz4, optics.img.lz4, cache.img.lz4, omr.img.lz4 from TH3 SM-N986U1 firmware (CSC)
3. Flash with odin, super.tar in the AP slot, and the CSC.tar in the CSC slot.
4. Boot into stock recovery and perform a factory reset
You will also need to edit mps_code.dat inside /efs/imei to reflect the carrier you desire. This needs to be done from a rooted system or from TWRP. After doing this and rebooting, you will be booted into your carriers system.
--->
Mentalmuso said:
USA stuff
I personally own the SM-N9860 device. I successfully converted the csc region to USA (tmobile) by doing the following.
1. Created a .tar of super.img from TH3 SM-N986U1 firmware (AP)
2. Created a .tar of prism.img.lz4, optics.img.lz4, cache.img.lz4, omr.img.lz4 from TH3 SM-N986U1 firmware (CSC)
3. Flash with odin, super.tar in the AP slot, and the CSC.tar in the CSC slot.
4. Boot into stock recovery and perform a factory reset
You will also need to edit mps_code.dat inside /efs/imei to reflect the carrier you desire. This needs to be done from a rooted system or from TWRP. After doing this and rebooting, you will be booted into your carriers system.
--->
Click to expand...
Click to collapse
Mentalmuso My bro, Will this work on Exynos SM-N986B/DS version. Thanks for all your hard work buddy. :good:
Edited : Will Wait for latest Version of September from Sammobile then Will Give a try and Report later. thx bro.
Mentalmuso said:
USA stuff
I personally own the SM-N9860 device. I successfully converted the csc region to USA (tmobile) by doing the following.
1. Created a .tar of super.img from TH3 SM-N986U1 firmware (AP)
2. Created a .tar of prism.img.lz4, optics.img.lz4, cache.img.lz4, omr.img.lz4 from TH3 SM-N986U1 firmware (CSC)
3. Flash with odin, super.tar in the AP slot, and the CSC.tar in the CSC slot.
4. Boot into stock recovery and perform a factory reset
You will also need to edit mps_code.dat inside /efs/imei to reflect the carrier you desire. This needs to be done from a rooted system or from TWRP. After doing this and rebooting, you will be booted into your carriers system.
--->
Click to expand...
Click to collapse
What the benefit? I have it too and in Canada
---------- Post added at 10:12 AM ---------- Previous post was at 09:39 AM ----------
Mentalmuso said:
Instructions
* Unlock bootloader - Enable dev settings, switch the oem unlock switch, boot into download mode, hold the
volume up button, confirm unlocking.
* Be aware, first clean boot, hangs on building cache, hard reboot after waiting about 3min and you'll boot past this
* If simply updating your existing TWRP, you only need to flash the TWRP.img in recovery.
Process from bone stock (TH* firmware)
1. Flash TWRP.tar in Odin (uncheck autoreboot)
2. Reboot directly into TWRP (hold vol+ and Bixby)
3. Format data, reboot recovery
4. Flash kernel (use img flash, flash boot.img)
5. Flash encryption disabler.
6. Flash Magisk.
7. Reboot system
Process from existing TWRP
1. Flash TWRP.img to recovery partition from within TWRP
2. Reboot system
N986x TWRP 3.4.0 Downloads
WETA Kernel
Forced Encryption Disabler
Telegram thread
--->
Click to expand...
Click to collapse
can u elaborate, what do I pick in ODIN and is it the patched kernel which is in the root thread? u say img flash and boot.img
Are these 2 files
inningsdefeat500 said:
What the benefit? I have it too and in Canada
---------- Post added at 10:12 AM ---------- Previous post was at 09:39 AM ----------
can u elaborate, what do I pick in ODIN and is it the patched kernel which is in the root thread? u say img flash and boot.img
Are these 2 files
Click to expand...
Click to collapse
Pick AP in odin to flash twrp.
Use img flash function in twrp to flash the kernel/boot.img. and I have no idea about the root thread so no, this is my own source built kernel.
beautyangel said:
Mentalmuso My bro, Will this work on Exynos SM-N986B/DS version. Thanks for all your hard work buddy. :good:
Edited : Will Wait for latest Version of September from Sammobile then Will Give a try and Report later. thx bro.
Click to expand...
Click to collapse
I'm confident that flashing the super.img from a snapdragon device on an exynos won't work.
Though flashing the csc imgs may get you somewhere. But I had trouble getting the csc to stick before flashing the super.img also.
Will this work for n976n (Korean variant, snapdragon)
It has the bootloader unlock in developer settings
interestingkid said:
Will this work for n976n (Korean variant, snapdragon)
It has the bootloader unlock in developer settings
Click to expand...
Click to collapse
I responded in telegram, thanks
Mentalmuso said:
USA stuff
I personally own the SM-N9860 device. I successfully converted the csc region to USA (tmobile) by doing the following.
1. Created a .tar of super.img from TH3 SM-N986U1 firmware (AP)
2. Created a .tar of prism.img.lz4, optics.img.lz4, cache.img.lz4, omr.img.lz4 from TH3 SM-N986U1 firmware (CSC)
3. Flash with odin, super.tar in the AP slot, and the CSC.tar in the CSC slot.
4. Boot into stock recovery and perform a factory reset
You will also need to edit mps_code.dat inside /efs/imei to reflect the carrier you desire. This needs to be done from a rooted system or from TWRP. After doing this and rebooting, you will be booted into your carriers system.
--->
Click to expand...
Click to collapse
So this will get us off the hongkong firmware? And we will get updates with our carrier?
---------- Post added at 06:38 PM ---------- Previous post was at 06:31 PM ----------
Mentalmuso said:
USA stuff
I personally own the SM-N9860 device. I successfully converted the csc region to USA (tmobile) by doing the following.
1. Created a .tar of super.img from TH3 SM-N986U1 firmware (AP)
2. Created a .tar of prism.img.lz4, optics.img.lz4, cache.img.lz4, omr.img.lz4 from TH3 SM-N986U1 firmware (CSC)
3. Flash with odin, super.tar in the AP slot, and the CSC.tar in the CSC slot.
4. Boot into stock recovery and perform a factory reset
You will also need to edit mps_code.dat inside /efs/imei to reflect the carrier you desire. This needs to be done from a rooted system or from TWRP. After doing this and rebooting, you will be booted into your carriers system.
--->
Click to expand...
Click to collapse
So this will get us off the hongkong firmware? And we will get updates with our carrier?
Mentalmuso said:
Pick AP in odin to flash twrp.
Use img flash function in twrp to flash the kernel/boot.img. and I have no idea about the root thread so no, this is my own source built kernel.
Click to expand...
Click to collapse
I already have root with Magisk - should I bone stock and then follow this
Sent from my SM-N9860 using Tapatalk
Mentalmuso said:
unofficial TWRP 3.4.0 for SM-N986x Snapdragon
*** This will only work on Snapdragon devices with an unlocked bootloader, but is technically compatible with all snapdragon Note 20 Ultra devices.
SM-N9860 | SM-N986U + U1 (if oem unlock is ever achieved)
Telegram thread
Built using OMNI source 10.0
TWRP v3.4.0
See post #2 for install steps
Changelog...
v1
Initial build
MTP, OTG and SDcard all working
Encryption not working
TWRP Downloads
N986x TWRP 3.4.0 Downloads
WETA Kernel
Forced Encryption Disabler
Telegram thread
--------------------->
Beer fund
XDA:DevDB Information
TWRP Note 20 Ultra (snapdragon), Kernel for the Samsung Galaxy Note 20 Ultra
Contributors
Mentalmuso, mentalmuso
Source Code: [url]https://github.com/mentalmuso/android_kernel_samsung_sd865plus_twrp[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.4.0-1
Created 2020-09-08
Last Updated 2020-09-08
Click to expand...
Click to collapse
Bud, I followed but its booting back in TWRP all the time
I started from Bone Stock
Reboots to TWRP only
I put Bone Stock back and followed Dr Ketans root and TWRP instructions but extracted recovery.img from this thread and the Encryption Disabler - all seemed OK in TWRP but
Reboots to TWRP only
Did this work for anyone?
---------- Post added at 08:25 AM ---------- Previous post was at 08:04 AM ----------
Mentalmuso said:
Pick AP in odin to flash twrp.
Use img flash function in twrp to flash the kernel/boot.img. and I have no idea about the root thread so no, this is my own source built kernel.
Click to expand...
Click to collapse
When I do this, I select Boot Partiton right?
Sorry, asking too many questions as OP instructions didn't work, it simply boots back to TWRP
Well, Just Follow OP Instructions.
My Phone Rooted, I Follow Dr.Ketan Instructions how to root in Exynos section.
Am on latest Stock Rom, All Bloatware Remove with Adb Shell command.
1. I do Not install TWRP.
I extract Patched AP (magisk) and copy Boot.img, then convert Boot to Patched Kernel.tar
And Follow OP Instructions for CSC
I confirmed All working Great Guys. We Can Change our CSC Carrier. "THAT'S A MAJOR MAJOR MAJOR GO". Really thats Awesome. Mentalmuso My Bro That's Awesome share Buddy. You Really Rock on this One. :highfive::good:
KURDKiNG said:
So this will get us off the hongkong firmware? And we will get updates with our carrier?
---------- Post added at 06:38 PM ---------- Previous post was at 06:31 PM ----------
So this will get us off the hongkong firmware? And we will get updates with our carrier?
Click to expand...
Click to collapse
I never said that, once rooted you aren't going to get any updates from anywhere. Rooting breaks ota
inningsdefeat500 said:
Bud, I followed but its booting back in TWRP all the time
I started from Bone Stock
Reboots to TWRP only
I put Bone Stock back and followed Dr Ketans root and TWRP instructions but extracted recovery.img from this thread and the Encryption Disabler - all seemed OK in TWRP but
Reboots to TWRP only
Click to expand...
Click to collapse
Did you format data?
beautyangel said:
Well, Just Follow OP Instructions.
My Phone Rooted, I Follow Dr.Ketan Instructions how to root in Exynos section.
Am on latest Stock Rom, All Bloatware Remove with Adb Shell command.
1. I do Not install TWRP.
I extract Patched AP (magisk) and copy Boot.img, then convert Boot to Patched Kernel.tar
]And Follow OP Instructions for CSC
I confirmed All working Great Guys. We Can Change our CSC Carrier. "THAT'S A MAJOR MAJOR MAJOR GO". Really thats Awesome. Mentalmuso My Bro That's Awesome share Buddy. You Really Rock on this One. :highfive::good:
Click to expand...
Click to collapse
I saw that as well, but can we install Root, TWRP and change CSC for this, my issues is getting stuck at going back to TWRP - u never tried that right
---------- Post added at 02:07 PM ---------- Previous post was at 02:02 PM ----------
[/COLOR]
Mentalmuso said:
I never said that, once rooted you aren't going to get any updates from anywhere. Rooting breaks ota
Click to expand...
Click to collapse
Mentalmuso said:
Did you format data?
Click to expand...
Click to collapse
I see your point about root, but like many I chose to do so - however, for inserting TWRP and making sure I do it right. I reloaded Stock Rom and followed your instructions. All went fine except, it boots back to TWRP only. In the end, didn't work and I gave up and just regular root now
Thus asking if this worked for anyone else, why is it that I got back to TWRP - if you like I can make a whole video of my process
** yes, I formatted data **
inningsdefeat500 said:
I got it rooted too , no issues - unsure what instruction abt CSC, as this is Snapdragon
Click to expand...
Click to collapse
Did you follow my methods in post #2 or ketans, just want to figure out what's happened to the other guys.
Mentalmuso said:
Did you follow my methods in post #2 or ketans, just want to figure out what's happened to the other guys.
Click to expand...
Click to collapse
I did yours which ended up going to TWRP
I tried Ketan's ( with how to get TWRP while rooting ) and it was same results - i.e, going back to TWRP
inningsdefeat500 said:
I got it rooted too , no issues - unsure what instruction abt CSC, as this is Snapdragon
---------- Post added at 02:07 PM ---------- Previous post was at 02:02 PM ----------
I see your point about root, but like many I chose to do so - however, for inserting TWRP and making sure I do it right. I reloaded Stock Rom and followed your instructions. All went fine except, it boots back to TWRP only. In the end, didn't work and I gave up and just regular root now
Thus asking if this worked for anyone else, why is it that I got back to TWRP - if you like I can make a whole video of my process
** yes, I formatted data **
Click to expand...
Click to collapse
I'm trying to figure out what happened to you is all. And I don't mean to offend by asking what seems to be obvious questions.
Giving me as much info as you can is only going to help. What firmware did you flash, and is your device BRI, TGY?? what csc did you come with when purchased.
I just downloaded and reflashed both kernel and twrp and had no problem. Though I did convert to usa system and vendor. I don't think that would matter