Hi guys I Really Really need your help cause i tryed a few things and I dont know where is the problem.I've installed ACID sound mod v.4 (doesn't mather ,tryed others too) but everything on screen is fine and the wallkman and dolby icons are there , when I play a SOUND it isn't LOUDER I can't feel it louder and the Speaker is not loud anymore like it was on stock.In past iv'e been installed sound drivers on older phones like w880i , k800i and... it was amaizing loud sound with bass and clearity.But this i have no words is it so normal? ? ? Cause i think it must be loud like petters hifi on older phones.And I tryed different headphones, like beats in ear , sts siberia, and nokia phones xpress.My device is rooted , unlocked bootloader i think cause it says on flashtool bootloader rooted- The clockwork is also installed , the room is 4.0.4 -431.ics. And yes i have no "macro" in shooting options, i think it's normal set on auto scn hdr. Sorry for my english ,hope you understand.Thanks
What is the best high quality audio mod for cm11 I dont mean for headphone only but also for loud speaker I used Viper4android but it didn' work with cm11 it keep telling me to instal driver even after reboot ... off topic is there any chance to have wifi-direct working on cm11
VampireK99 said:
What is the best high quality audio mod for cm11 I dont mean for headphone only but also for loud speaker I used Viper4android but it didn' work with cm11 it keep telling me to instal driver even after reboot ... off topic is there any chance to have wifi-direct working on cm11
Click to expand...
Click to collapse
use that http://forum.xda-developers.com/showthread.php?t=2765331 with viper for best sound ! i have aicp and no problems have more bass cleaner sound and more sound power ^^
edit : i try it with slimsaber too think work with every rom ^^
hi guys ,
i have m4 aqua e2333 dual sim , unlocked bootloader and rooted , during a call when I switch loudspeaker , the other person cant hear me and my mic is automatically muted , but in music and videos no problem in sound , I tried deactivating noise cancellation but it still exist , also I changed to stock firmware but no improvement , any one has an idea ???
Yeah As Well For Me And Other E2333, Please Help!
Mine was like that too. I had to change mic hardware.
Try this tool. I used with success.
https://play.google.com/store/apps/details?id=apps.redpi.soundcalibration&hl=pt-PT
Headsets working fine on other phone but on my redmi 3 ...it is ridiculous low , viper4android only increase bass ( didn't notice some good improvement ) , the same headset but with cable its amazing but on bluetooth i struggle to hear outside , someone have some good trick ? I`m rooted , don't tell me about the bull**** apps from market (they do the same i can do from volume buttons +-)
i have no problem with bluetooth headset at all.i am using sony sbh 54.which rom are u using?
Stock miui 8 rooted / xtrvbeta
use some other rom and see if that helps u.if not then there is nothing i can do to help u as i dont have probs like ur with my bluetooth headset
I will try with cm14 with next beta (or release) for the moment i'm looking for some tweaks inside rom like mixer_path for headphone .
i have the same problem.. on xtrv... do you found solution? whatapps col seems okey, but song low
No solution i abandoned and get some wired headset .....i was only have problem in music (no matter about music app or sound mod or rom) , but in calls was beautifull sound .
awww such a shame...
This mod enables the Earpiece speaker to be used at the same time with the main rear speaker when using listening to music, and watching videos etc...
Updated
Now TRUE STEREO with Earpiece playing the LEFT channel and rear speaker playing the RIGHT channel. Test with app of your choice.
Click to expand...
Click to collapse
To install open the zip file and extract the "default_gain.conf" file and copy it to "/system/etc/default_gain.conf" using your preferred method.
Then set permissions to rw-r-r or 0644 ( e.g "chmod 0644 /system/etc/default_gain.conf" ) and REBOOT your device.
Volume levels are pushed to maximum possible without distortion with EQ on Earpiece speaker to remove low frequencies. Good luck.
Works on my SM-910K running MarshMallow 6.0.1.
WARNING!!!
THIS HAS ONLY BEEN TESTED ON THE DEVICE MENTIONED ABOVE. MAKE SURE TO BACKUP YOUR DEFAULT "default_gain.conf" FILE BEFORE INSTALLING THE NEW ONE.
(E.g "adb pull /system/etc/default_gain.conf [safe location here]" or "adb shell cp /system/etc/default_gain.conf /sdcard/default_gain.conf.bak" )
To be SAFE DO a NANDroid backup in Recovery.
Happy modding.
NOTE:
If you cannot find "/system/etc/default_gain.conf" file on your device then this MOD will NOT WORK for you. If that is the case you can try the other surround mods for other variants of the Note 4. This has only been tested to work on the N910K.
I created this one because the mods for the other variants didn't work on my phone since it uses the "default_gain.conf" file instead of the 'normal' "mixer_paths.xml" file.
Source
https://github.com/salvenose/dual_mod
Changelog
v1 -> Initial Dual Speaker Mod
v2 -> Upgrade to true stereo
v3 -> Fix for audio leak through earpiece while Headphone connected
Tried it on my N910F running 6.0.1 and seems like it works,but need to cover the main speaker to hear anything from the earpiece.
alexetna95 said:
Tried it on my N910F running 6.0.1 and seems like it works,but need to cover the main speaker to hear anything from the earpiece.
Click to expand...
Click to collapse
If there was a quick ON/OFF toggle you would notice that it makes quite a difference than with it turned off completely. Especially when you receive a notification etc... with your phone lying on a flat surface.
I haven't yet figured out how to manipulate the EQ settings for the front earpiece so that it only outputs mid-treble range without any bass.
Once I do, I'll be able to boost the volume without causing distortion. Otherwise it might damage the earpiece.
Where shoud I found that toogle ?
Actually I didn't find a "default_gain.conf" file in etc,so I just simply copied the one from your mod zip.
alexetna95 said:
Where shoud I found that toogle ?
Actually I didn't find a "default_gain.conf" file in etc,so I just simply copied the one from your mod zip.
Click to expand...
Click to collapse
If you didn't find a "default_gain.conf" file then the mod definitely won't work. It's not working for you.
Would this work on N910U?
It works on the 910C running Nemesis
Good job OP, this mod on 910C it is been hit and miss with a lot of distortion. This is the best implementation I have used. ?
Finaly N910c has this mod
It is working. Thank you very much :highfive::highfive:
Came from @mangui's post in NEMESIS REFINED V3.8.5 N7 Port by*ananjaser1211
Confirmed!!! This work good on 910C , thanks very good mod
Working, but after first call - microphone stop working
Fixed call microphone
alextalexus said:
Working, but after first call - microphone stop working
Click to expand...
Click to collapse
I've fixed it ?
Hi theres a bug
when I plug in earphones , sound still comes out of front mic
Here is the source pushed to GitHub
https://github.com/salvenose/dual_mod
Possible Fix
Ryuce said:
Hi theres a bug
when I plug in earphones , sound still comes out of front mic
Click to expand...
Click to collapse
Can you tell me if this fix works
https://raw.githubusercontent.com/salvenose/dual_mod/master/default_gain.conf
sVenose said:
Can you tell me if this fix works
https://raw.githubusercontent.com/salvenose/dual_mod/master/default_gain.conf
Click to expand...
Click to collapse
Thanks bro its fixed!
Ryuce said:
Thanks bro its fixed!
Click to expand...
Click to collapse
Alright. Just added v3 to the original post. Have a nice day and God bless you.
Wooooow
Thats awesome
V3 Working great on N910C ,
I found another bug
When i make phone call people i call cant hear me
Ryuce said:
I found another bug
When i make phone call people i call cant hear me
Click to expand...
Click to collapse
Yes i have the same problem,
I have to restart my phone, then it worka fine
Hi again,
After update to erobotrom v1.2, I have the same problem - microphone stop working. Somebody have the original mixer_path and default_gain or the other solution for this problem. Thx.