Hi folks, the soft pad on my usb flap (copper z3) has gone completely and the flap is almost useless now.
I was looking for a good replacement (if not original). Could someone (who has already bought) guide me the best place to buy the same?
ebay.com/itm/For-Sony-Xperia-Z3-D6653-New-Original-Sim-Micro-SD-Card-Slot-USB-Port-Cover-Caps-/262454338163?var=&hash=item3d1b7f6273:m:m4Tor8pLU_Nnua_IT4rT2FA
I ordered mine from here
kristijan15 said:
ebay.com/itm/For-Sony-Xperia-Z3-D6653-New-Original-Sim-Micro-SD-Card-Slot-USB-Port-Cover-Caps-/262454338163?var=&hash=item3d1b7f6273:m:m4Tor8pLU_Nnua_IT4rT2FA
I ordered mine from here
Click to expand...
Click to collapse
Hello, thank you. have you been using already? could you please share some snaps of it?
chandanbs said:
Hello, thank you. have you been using already? could you please share some snaps of it?
Click to expand...
Click to collapse
I am using it, looks exactly the same as the original one
kristijan15 said:
ebay.com/itm/For-Sony-Xperia-Z3-D6653-New-Original-Sim-Micro-SD-Card-Slot-USB-Port-Cover-Caps-/262454338163?var=&hash=item3d1b7f6273:m:m4Tor8pLU_Nnua_IT4rT2FA
I ordered mine from here
Click to expand...
Click to collapse
How did you install it? Did you have to take the phone apart?
shamsul007 said:
How did you install it? Did you have to take the phone apart?
Click to expand...
Click to collapse
No, just use some force to pull the old flap out but be careful to not break the screen while pulling it. For the new I used a toothpick to press it inside as the top is a little conical to fit in
kristijan15 said:
I am using it, looks exactly the same as the original one
Click to expand...
Click to collapse
hey.. i bought this from ebay.. it looked exactly same.. but when i fit it, it cant be pushed in completely.. . its become useless for me.
Related
The biggest problem for me in Xperia Z was "constant" dirty phone with a "full body" of fingerprints. That was a biggest minus for me on Xperia Z. And the most difficult part there was a cleaning process. Had to constantly wash it under the water.
Thinking about that, what the whole issue is a "protective film" I have decided to took it away. The problem was increased.
I hurry please you all, Xperia Z Ultra brought this problem to a minimum.
The display is much better resists fingerprints. I want to draw attention to the fact that front glass resists fingerprints far better than the back side.
My scale points is:
Xperia Z- 2/10.
Xperia Z Ultra- 8/10.
And the most good fact that you can "easily" removed them now with out any effort. (Example like on Galaxy S 4)
Regards.
Fingerprint issue?
No more problem now.
Take the device go to shower and keep clean.
Device get Hot?
No more problem now.
Take the device go to shower and stay cold.
This is why Sony xperia waterproof & dustproof but not bullet proof.
Sent from my C6802 using xda app-developers app
Bu what about scratch resistance?
Hardcore73 said:
Bu what about scratch resistance?
Click to expand...
Click to collapse
have no idea., but I think it will be better, just due to drawing stuff
is the sony logo printed on the film or the device? i just got my first scratch after a few days of using it and a really long one just recently :crying:
hazmat28 said:
is the sony logo printed on the film or the device? i just got my first scratch after a few days of using it and a really long one just recently :crying:
Click to expand...
Click to collapse
Im sory but Im sure yes
avetny said:
Im sory but Im sure yes
Click to expand...
Click to collapse
i'm guessing it's a yes to the film :crying: it's fine... how do you find the screen now?
hazmat28 said:
i'm guessing it's a yes to the film :crying: it's fine... how do you find the screen now?
Click to expand...
Click to collapse
Hey there is not a big deal! look very closely you will see protector.
So take it off and put any other.
I did that on my Z.
avetny said:
Hey there is not a big deal! look very closely you will see protector.
So take it off and put any other.
I did that on my Z.
Click to expand...
Click to collapse
It'll remove the logo too
Sent from my C6802 using Tapatalk 4
rockmaster said:
It'll remove the logo too
Sent from my C6802 using Tapatalk 4
Click to expand...
Click to collapse
Yep
avetny said:
Yep
Click to expand...
Click to collapse
And that sucks.... Why just print the logo on the film? stupid Sony
Sent from my C6802 using Tapatalk 4
kkkok8051 said:
Device get Hot?
No more problem now.
Take the device go to shower and stay cold.
Click to expand...
Click to collapse
Oww? Thermal downshock?
marc_ecko28 said:
Oww? Thermal downshock?
Click to expand...
Click to collapse
Yes, but only if you enjoy your showers at 0 Kelvin.
LordManhattan said:
Yes, but only if you enjoy your showers at 0 Kelvin.
Click to expand...
Click to collapse
Hahaha
I got my Z2 yesterday and unfortunately dropped it later that evening and the glass on the back shattered.. Does anybody know how much it would cost me to replace the glass on the back? is there something i can buy and replace it myself?
I doubt there's anyone out there right now who does it, unless maybe you live in Europe. I'd try contacting Sony, see what they say.
You can buy glass replacement on ebay already, doesnt cost much
Sent from my D6503 using Tapatalk 2
feis said:
You can buy glass replacement on ebay already, doesnt cost much
Sent from my D6503 using Tapatalk 2
Click to expand...
Click to collapse
Could you give me a link please? Can only find Z1 back housing's
King Cole said:
I doubt there's anyone out there right now who does it, unless maybe you live in Europe. I'd try contacting Sony, see what they say.
Click to expand...
Click to collapse
I've been around a few places in my city today and one of them could legally repair Sony devices but that would cost me over 400 dollars..
I suggest repairing it yourself. Back should be easily repairable. The front is much harder..
solwretep said:
I suggest repairing it yourself. Back should be easily repairable. The front is much harder..
Click to expand...
Click to collapse
Yeah, I've seen some videos of the z1's back being replaced.. Doesn't look that hard, I just need to buy the back for Z2 but I can't find it online.. I probably need to wait a few weeks.
Natoww said:
Could you give me a link please? Can only find Z1 back housing's
Click to expand...
Click to collapse
http://m.ebay.co.uk/itm/141229669004?nav=SEARCH
Im quite sure i saw a bit cheaper one, just dont have time to search now
Sent from my D6503 using Tapatalk 2
feis said:
Im quite sure i saw a bit cheaper one, just dont have time to search now
Sent from my D6503 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for link although I don't think I'll get that one.. I think they forgot to add the "A" on the back... :laugh:
Yeah i noticed that now, you should contact seller and ask some questions, after all he is stating its "genuine". Im pretty sure i saw some more of these, maybe on amazon not ebay.
Sent from my D6503 using Tapatalk 2
Natoww said:
Thanks for link although I don't think I'll get that one.. I think they forgot to add the "A" on the back... :laugh:
Click to expand...
Click to collapse
You can pay attention to witrigs.com. They do well on Sony replacement parts, i purchased the cover flaps there and works well.
Sophia Zhao said:
You can pay attention to witrigs.com. They do well on Sony replacement parts, i purchased the cover flaps there and works well.
Click to expand...
Click to collapse
Thanks for link, the price is good. Can't see any sony or xperia branding on the cover in the pictures, sent a mail to them asking if it's genuine..
Someone gave me a SGS5 with a cracked rear camera lens. I replaced the lens and made sure I really cleaned the camera but it has these 3 brown shadows. They are small but very annoying. So I ordered a new camera.
My question is has anyone replaced one before and how hard is it?
TIA for any replies.
Sent from my 5054N using Tapatalk
It's easy. It's only connected by a ribbon cable I believe, should be a quick 10 minute job.
Sean89us said:
It's easy. It's only connected by a ribbon cable I believe, should be a quick 10 minute job.
Click to expand...
Click to collapse
Thanks but while replacing the screen I jacked up the digitizer. I can't believe I did that. I'm looking on line and the cheapest I can find is $125 . I can buy a whole used one for that much or less if I get lucky. Guess I'll be using it for parts now. Thanks for the reply anyway.
Sent from my 5054N using Tapatalk
linsalata28 said:
Thanks but while replacing the screen I jacked up the digitizer. I can't believe I did that. I'm looking on line and the cheapest I can find is $125 . I can buy a whole used one for that much or less if I get lucky. Guess I'll be using it for parts now. Thanks for the reply anyway.
Click to expand...
Click to collapse
You have a link to the camera you bought? Be cool to replace mine to make the phone water "proof" again if cheap
ShinySide said:
You have a link to the camera you bought? Be cool to replace mine to make the phone water "proof" again if cheap
Click to expand...
Click to collapse
I'll sell you mine. I paid $6 for it.
Sent from my 5054N using Tapatalk
Anyone please suggest a durable backcase for this phone. And anyone using either of these two cases available Amazon india? If yes, reviews plz...
https://www.amazon.in/Annure®-Shock...coding=UTF8&psc=1&refRID=4R38ENRRBW67W45R2NVN
https://www.amazon.in/WOW-Imagine-B...coding=UTF8&psc=1&refRID=J15MD7CD7WB7BPMHMBRF
himanshuvatsal said:
Anyone please suggest a durable backcase for this phone. And anyone using either of these two cases available Amazon india? If yes, reviews plz...
https://www.amazon.in/Annure®-Shock...coding=UTF8&psc=1&refRID=4R38ENRRBW67W45R2NVN
https://www.amazon.in/WOW-Imagine-B...coding=UTF8&psc=1&refRID=J15MD7CD7WB7BPMHMBRF
Click to expand...
Click to collapse
Didn't you get a TPU case with the handset?
Rowdyy Ronnie said:
Didn't you get a TPU case with the handset?
Click to expand...
Click to collapse
Thats simply suc**s. I put that in dustbin the same day
Rajeev said:
Thats simply suc**s. I put that in dustbin the same day
Click to expand...
Click to collapse
So which one are you using currently?
himanshuvatsal said:
So which one are you using currently?
Click to expand...
Click to collapse
360 full cover bro. From local shop. 100 rs. Waiting for Spigen
himanshuvatsal said:
Anyone please suggest a durable backcase for this phone. And anyone using either of these two cases available Amazon india? If yes, reviews plz...
https://www.amazon.in/Annure®-Shock...coding=UTF8&psc=1&refRID=4R38ENRRBW67W45R2NVN
https://www.amazon.in/WOW-Imagine-B...coding=UTF8&psc=1&refRID=J15MD7CD7WB7BPMHMBRF
Click to expand...
Click to collapse
https://forum.xda-developers.com/nokia-7-plus/accessories/taoyunxi-silicone-nokia-7-plus-t3843361
Annure® Shock Proof Hard with Soft Border Back Case Cover for Nokia 7 Plus (Black Border) https://www.amazon.in/dp/B07C316YPR/ref=cm_sw_r_cp_apap_dlz3weL1SH7JV
As title glue it back? Or buy new adhesive?
nostupidthing said:
As title glue it back? Or buy new adhesive?
Click to expand...
Click to collapse
Still turning on or not? You can tape it temporarily before buying new adhesive to use.
LR7875 said:
Still turning on or not? You can tape it temporarily before buying new adhesive to use.
Click to expand...
Click to collapse
Working totally. Where to buy tapes? Thx
nostupidthing said:
Working totally. Where to buy tapes? Thx
Click to expand...
Click to collapse
just these if the extent is not serious
LR7875 said:
just these if the extent is not serious
Click to expand...
Click to collapse
Thanks!