Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
aboumoslih said:
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
Click to expand...
Click to collapse
You can solve your problem with Multi Tools and -Unbrick from bootloop
Follow these steps in order to return it to fully stock:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
i flashed new recovery mode to my Gr5 nd i want to go back to stock recovery to have marshmelo update can any one help me pls
sorry for bad english
:crying:
Abdel_Fattah said:
i flashed new recovery mode to my Gr5 nd i want to go back to stock recovery to have marshmelo update can any one help me pls
sorry for bad english
:crying:
Click to expand...
Click to collapse
Wat is the full model of ur phone? KII-L21?
Go to file depot and get the recovery for ur phone (B130 or B140) or better still get the stock rom from the huawei website of your country and use Huawei Extractor to extract the recovery file. You just have to make sure it tallies with ur software version. B130 or B140 or whatever it is. Copy the recovery file to adb folder and rename to 'recovery.img'
When you get the recovery file, boot into bootloader/fasboot mode using the code below in adb.
"fastboot reboot bootloader"
Then flash it using the code below.
"fastboot flash recovery recovery.img"
This should get you stock recovery.
"fastboot reboot recovery" should get you into recovery. To show it's changed to stock.
Note: If you are not sure of the recovery to get, post a screenshot showing your phone information including the software version. Settings > About phone. That's the one. Cheers
Follow these steps and you are back on stock in no time:
As I don't know if you modified system or not, I'm gonna show you the full method.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Hey,
I wanted to do a nandroid backup so I did adb reboot recovery to go to TWRP, now I can't boot into system, I'm stuck in twrp, I can't even power off the phone it keeps booting up again and again. Please help i'm really lost. Thanks
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Nexx_ said:
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Click to expand...
Click to collapse
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
memht said:
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
Click to expand...
Click to collapse
Okay thank you, I will try flashing them manually because I have twrp
@DigiGoon Please can you help me with it?
You were on which system? Stock or any Custom ROM?
DigiGoon said:
You were on which system? Stock or any Custom ROM?
Click to expand...
Click to collapse
I was on stock b371
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
Thank you a lot for helping me I'll try to follow the process as soon as I get windows on my Mac
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
memht said:
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
Click to expand...
Click to collapse
The way his phone is acting, system is the main thing he needs to flash.
Same kind of problem different dude
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
mosoo said:
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
Click to expand...
Click to collapse
Several options you got:
Install older SuperSU. I remember I had the same thing and the only way was to downgrade SuperSU. 2.5x, I think.
Try to access fastboot - turn off phone, keep vol- pressed and power up. Release vol- when you see fastboot screen. Try it with and without USB PC connection.
Try to deplete your battery. It works in other devices as after charging again, boot.img behaves differently. Don't ask me why, but if the phone charges as it is, no harm in trying.
Wipe all partitions - Dalvik, cache, data, internal storage and system. And then install a custom ROM from sdcard or USB-OTG. You can access H7 content from PC, through USB, while in TWRP.
Huawei eRecovery
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
mosoo said:
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
Please share your solution with others, so that your post can be referred.
Doing a forced updated (dload) gives the absolute assurance you flashed all the partitions correctly with all the *.img compressed files in the update.app file.
mosoo said:
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
When you flash the partitions manually, we are not flashing all of them, only some of them, and some partitions are not in regular img format, so by doing the three button update we can put all the partitions in their respective places.
Another benefit of doing force update is that if you don't know your build number and flashed system.img, cust.img etc of some other build then by doing a force update all the img files of same build are flashed.
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Hi , flash this file for root , works both for B121 to B371.
https://drive.google.com/file/d/0B3O4DzQkXNR4aFoxbXk5cmZPRlE/view?usp=sharing
it's a super SU adapted to Honor7 by me
.
technopark said:
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Click to expand...
Click to collapse
You have to flash the Stock firmware in order to reborn the phone.
Follow these steps in order to do that.
Download your latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will nw get to the full stock firmware.
This will help you get your fone back from loops.
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
@DigiGoon
harryspar said:
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
Click to expand...
Click to collapse
It probably is part of the problem. you could try to originaly update your phone the oficcial way. Flash the stock recovery and drop a oficcial update in your dload folder. it should restore your phone and it should all be fixed. from that you can update to android 6.0.
Cheers:good:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
DigiGoon said:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
clsA said:
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
Click to expand...
Click to collapse
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
Fastboot commands on flash cust cust.img fail with the error "Remote: Command not allowed"
Code:
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
no their are other partitions that cannot be flashed with fastboot, I don't have the full list
Yes some partitions are not flashable but system, cust, recovery, boot should be. We should look into this.
Sent from my Huawei Honor 7 using Tapatalk