Related
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
aboumoslih said:
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
Click to expand...
Click to collapse
You can solve your problem with Multi Tools and -Unbrick from bootloop
Follow these steps in order to return it to fully stock:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
yesterday i formatted my HONOR 5x via TWRP .
now my device without OS , and every time REBOOT it from recovery mode it says : NO OS , ARE YOU SURE YOU WANT TO REBOOT
guys i need the official ROM for my Phone so i can install it
My phone name : Huawi Honor 5x L-21
Please save me !! :crying::crying:
Trustive said:
yesterday i formatted my HONOR 5x via TWRP .
now my device without OS , and every time REBOOT it from recovery mode it says : NO OS , ARE YOU SURE YOU WANT TO REBOOT
guys i need the official ROM for my Phone so i can install it
My phone name : Huawi Honor 5x L-21
Please save me !! :crying::crying:
Click to expand...
Click to collapse
everything you need is in the Repository in my signature
if you want to reinstall the official rom {emui} you need to also install the stock recovery
Follow these steps to flash Stock ROM:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Hi, you are supposed to do a TWRP backup before flashing/ try to root, so just restore it.
Envoyé de mon PLK-L01 en utilisant Tapatalk
Theres no backup
You have to flash the files extracted from B371's UPDATE.APP, the files you need to flash are system.img, boot.img, cust.img, recovery.img
and after doing that, do the famous three button update with that UPDATE.APP only.
Hope this helps.
acesama said:
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Click to expand...
Click to collapse
Unroot if he has root.
Extract System.img, Boot.img and Recovery.img from B370 and flash them manually.
How? Any tut pls
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Go to SuperSU and in settings select full unroot.
Reboot the phone and check the unroot with some app you might have installed that requires root privileges.
Extract recovery.img from update.app file inside of B370 zip update file.
Install minimal ADB and fastboot in your PC
Install latest Google ADB driver
Reboot your PC.
Connect your H7 to PC.
Reboot H7 into fastboot mode.
Copy recovery.img to ADB fastboot folder in your PC.
Run ADB in your PC.
Run ADB commands:
fastboot devices - should reply with a device (yours)
fastboot flash recovery recovery.img
fastboot reboot
Copy the update.app from B370 zip file to a "dload" folder in your phone. Either in root of SDcard your root of phone.
Turn off phone.
Press simultaneously vol+- and power until you see any screen. Should be the update screen. It will update then reboot.
Factory reset and your done.
digigoon said:
follow below steps and you are good to go:
download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from update.app using huawei update extractor tool.
boot into bootloader mode by switching off the phone then pressing only the vol down button, and connecting it to pc simultaneously.
flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
after doing this put that very update.app from which you extracted the files in dload folder of your external sdcard.
switch off your phone, and press vol up + vol down + power button simultaneously.
your device will now get to the full stock firmware.
note: if the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e putting the update.app from which you extracted the files in dload folder of your external sdcard and pressing vol up + vol down + power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
thnx thats very helpful
@acesama
Awesome..!!
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Please boot into recovery, wipe cache and dalvik cache, reboot. It might take a bit longer to boot but if does not boot for 15, 20 minutes then you are in bootloop again.
Report back if that happens.
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Did you flash the same firmware you had before or a different one?
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Probably because either of these:
1 - still using TWRP recovery - need to flash stock recovery.img
2 - corrupted boot.img - flash cust, boot, recovery and system img files from CURRENT B1xx or B3xx ROM update file.
DigiGoon said:
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
ocali94 said:
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
Click to expand...
Click to collapse
A while, don't stress out and have to phone fully charged and/or connected to the charger. It can last like 20 minutes.
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Raleor said:
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Click to expand...
Click to collapse
have you solved the problem or need help?
Did you try the correct package.
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
[email protected] said:
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
Click to expand...
Click to collapse
Twrp backup of stock rom??
hassanjavaid8181 said:
Twrp backup of stock rom??
Click to expand...
Click to collapse
Sorry I not have twrp backup so plz I need twrp backup anyone share it to me thanks in advance
Hey,
I wanted to do a nandroid backup so I did adb reboot recovery to go to TWRP, now I can't boot into system, I'm stuck in twrp, I can't even power off the phone it keeps booting up again and again. Please help i'm really lost. Thanks
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Nexx_ said:
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Click to expand...
Click to collapse
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
memht said:
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
Click to expand...
Click to collapse
Okay thank you, I will try flashing them manually because I have twrp
@DigiGoon Please can you help me with it?
You were on which system? Stock or any Custom ROM?
DigiGoon said:
You were on which system? Stock or any Custom ROM?
Click to expand...
Click to collapse
I was on stock b371
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
Thank you a lot for helping me I'll try to follow the process as soon as I get windows on my Mac
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
memht said:
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
Click to expand...
Click to collapse
The way his phone is acting, system is the main thing he needs to flash.
Same kind of problem different dude
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
mosoo said:
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
Click to expand...
Click to collapse
Several options you got:
Install older SuperSU. I remember I had the same thing and the only way was to downgrade SuperSU. 2.5x, I think.
Try to access fastboot - turn off phone, keep vol- pressed and power up. Release vol- when you see fastboot screen. Try it with and without USB PC connection.
Try to deplete your battery. It works in other devices as after charging again, boot.img behaves differently. Don't ask me why, but if the phone charges as it is, no harm in trying.
Wipe all partitions - Dalvik, cache, data, internal storage and system. And then install a custom ROM from sdcard or USB-OTG. You can access H7 content from PC, through USB, while in TWRP.
Huawei eRecovery
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
mosoo said:
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
Please share your solution with others, so that your post can be referred.
Doing a forced updated (dload) gives the absolute assurance you flashed all the partitions correctly with all the *.img compressed files in the update.app file.
mosoo said:
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
When you flash the partitions manually, we are not flashing all of them, only some of them, and some partitions are not in regular img format, so by doing the three button update we can put all the partitions in their respective places.
Another benefit of doing force update is that if you don't know your build number and flashed system.img, cust.img etc of some other build then by doing a force update all the img files of same build are flashed.
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
@DigiGoon
harryspar said:
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
Click to expand...
Click to collapse
It probably is part of the problem. you could try to originaly update your phone the oficcial way. Flash the stock recovery and drop a oficcial update in your dload folder. it should restore your phone and it should all be fixed. from that you can update to android 6.0.
Cheers:good:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
DigiGoon said:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
clsA said:
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
Click to expand...
Click to collapse
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
Fastboot commands on flash cust cust.img fail with the error "Remote: Command not allowed"
Code:
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
no their are other partitions that cannot be flashed with fastboot, I don't have the full list
Yes some partitions are not flashable but system, cust, recovery, boot should be. We should look into this.
Sent from my Huawei Honor 7 using Tapatalk