Hello!!!
Ibought this phone on the net and i have problems with imei code its canceled or anything else,
i rothed phone with kingo android root,
and i tryed vith factory restore but not sucesful
and i tryed with MTK tools but not sucesfull,
i want now to flash but i need ROM for this phone anyione know where to find this rom i searched on needrom.cm
but nothing i have screns!
I attempted to root my Sprint LG G3 and bricked it. I am attempting to restore it with the following.
LG Flashtool V.1.8.6.527
LGLS990_20140704_LGFLASHv160.dll
LS990ZV4_04.51101.tot
I have tried to restore but it keeps telling me the Model Information Check Failed.
I have seen a post about a Verizion phone with the same problem and was told to swap out the dll file with a differant version and that fixed his problem, I am unable to find an allternitive dll for my LG G3 any help would be appreciated.
Hi
I would advise that you check the model number of your phone on the motherboard.
My phone had D855 written all over it, but when I opened it up, the motherboard was LS990!
It was a refurbished phone
Have you figured out a solution to this? I also have a Sprint G3, a LS990, and am having the same issue when trying to flash a .tot file with LG FlashTool.
Hello everyone, I'm residing in Korea by the moment... my carrier is olleh (KT)... I used to have an LG G pro 2 from the carrier so had no problem at all. recently I switched to a new G5. the problem now it's the model is F700L (from other carrier) and there are some benefits I get with my carrier (KT) that I can't when the phone doesn't match the same carrier ...
I've been reading and researching about changing the rom to the one from the other carrier, and LGUP throws error when saying: Error F700L > F700K ... I know there won't be any problem doing this because the hardware is the same. And as far as I know there's no possible way to root the phone and unlock the bootloader or install a custom one for later on install the other rom from there... :silly::crying::crying: .... so....
after so many days trying got disappointed and annoyed... gotta ask... is there any other way to flash without confirmation? (with Odin or other?... FlashTools doesn't get to communicate with the device in download mode... and LG Flash.. requires a DLL and can't find it anywhere...) ... or getting inside the phone using ssh (i'm linux user) or other with the help of the adb ... and get to edit the model just to change the freaking L by a K??
The other possible way could be editing the actual KDZ to match the info... I've tried WinHex but LGUP says: Invalid KDZ after the edition.... some other way?
will appreciate any idea... thanks!
Hello,
I'm looking for my stock kdz however i cant figure out what region my device is.
On Lg servers i get <model>LGABCD</model> <suffix>XABCXX</suffix>
However i cant find this file.
My imei is: 357657074913993
I have had the phone imei unlocked in the past.
Thank You
Dw found it: https://www.imei.info/check/lg-free/3599c7bf-a659-448b-a3b7-0834b72c667d/send/
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?