hi xda
got a big problem , my cm flare dash is in bootloop or bricked or sumthing else , I think my emmc is corupted. every time I boot my phone it always show "encryption unsucesful reset your phone to resume using your phone" when I click the reset phone it boot to my stock recovery with an error e: failed to mount data , try wiping cache and restoring factory settings via stock recovery but it doesnt work , ive already tried flashing a stock rom using qualfast , qrt , qpst , but no suces in flashing , I even tried flashing via fastboot mode using minimal fastboot but it stock in sending system.img forever I even try erasing via fastboot using the command fastboot erase system or cache it prompts ok but nothing's change , oh and by the way my usb debuging mode is off and I dont have an ability to turn it on coz im in bootloop, and I dont have root rights , any help from xda? pls pls??
Hello guys. I need your help. I think i somehow soft bricked my dad's s3 3gb ram version.
What i have done is flashing a TWRP img. Twrp was just fine. After that i wiped and installed a rom. I think the zip was broken or something because after the processes is done twrp said there is no OS (operation system). I clicked on reboot anyway by mistake i guess...
And at this point my phone only restarts itself. I can get in FASTBOOT mode. I have the drivers and all but i dont know what can i do with the fastboot mode.. But fastboot seems stable. The phone is not restarting when it is on fasboot mode. Yet as i say again. Is there ANYTHING i can do with fastboot commands? i tried to flash a recovery twrp img it said recovery partition doesnt support flashing..
When i try to boot in recovery the phone seems to start booting to recovery but after a while it restarts itself as it does always...
I tried SP flash tool mode too. My driver is fine, i can see preloader driver on my device manager but as always phone restarts itself to boot in normal mode... If only i can stop the phone from restarting.. I have twrp backup... Or i can flash stock rom...
Please help... Any reply will be appreciated.
I mentioned my problem on the main topic of jiayu s3 but since there is so little user attention there i wanted to open a thread here as well.. Sorry if its out of rule.
Hi all,
I'm new here so idk if this is the right or the wrong section for my problem, but I need help like I never did xD
So I have Doogee X6 phone it's mt6580 android 5.1 , few days ago I decided to root it and I done it with Kingoroot app and it succeed. Today, I tried to install custon recovery so I head to Needrom and download twrp img from there and tried to install it with ADB FASTBOOT FILES WINDOWS like in this XDA tutorial
https://www.xda-developers.com/how-to-install-twrp/
I followed the steps then I ran to the problem where I had to unlock boatloader with "fastboot oem unlock" next I install the recovery img using "fastboot flash recovery twrp-2.8.x.x-xxx.img", after that the phone started to reboot and try to enter twrp with some failure lines like:
updating patrition details
'full selinx support is ..
failed to find /data invalid argument
... done'
I tried to boot into Factory mode or pressing all the buttons but didn't work the reboot process is quite fast :'(
So what should I do now ? did I brick my phone or can it be repaired again ?
I apreciate it if someone can help me with my problem
Thank you
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
I have realme 3 pro and my bootloader was unlocked skme days ago i accendenatlly flash some malware application and then my device switch of and bootloop on custom rom logo then i tried to go in fastboot mode but its again bootloop in fastboot logo However i tried to boot in device then i see my network did not show and my wifi also no working then i format my rom amd change roms but its booting but not going in fastboot mode (i go to recovery through adb cammands) then some tell me go to stock rom i flash it through recovery (Remember i cant go to fastboot mode i go to recovery through adb cammands) and i flash the the stock rom after flash stock rom then my device did not setup becouse of network then i pass it out through *#813# now in my device not showing any type of signal expect Bluetooth and did not boot into fastboot and now it have stock revovery and also my imei no and baseband version is null before i am in twrp whenever i flash something then show me a eror "failed to mount presis file" like this but i also visit service centre but they flash Rui 2.0 and i talk him about signal and imei no but they telling its motherboard issue and its cost around 8k Indian rupees now i am fouked so help me to this
did you manage to fix it?