Imei No wiped, baseband was unknown and my fastboot crash - Realme 3 Pro Questions & Answers

I have realme 3 pro and my bootloader was unlocked skme days ago i accendenatlly flash some malware application and then my device switch of and bootloop on custom rom logo then i tried to go in fastboot mode but its again bootloop in fastboot logo However i tried to boot in device then i see my network did not show and my wifi also no working then i format my rom amd change roms but its booting but not going in fastboot mode (i go to recovery through adb cammands) then some tell me go to stock rom i flash it through recovery (Remember i cant go to fastboot mode i go to recovery through adb cammands) and i flash the the stock rom after flash stock rom then my device did not setup becouse of network then i pass it out through *#813# now in my device not showing any type of signal expect Bluetooth and did not boot into fastboot and now it have stock revovery and also my imei no and baseband version is null before i am in twrp whenever i flash something then show me a eror "failed to mount presis file" like this but i also visit service centre but they flash Rui 2.0 and i talk him about signal and imei no but they telling its motherboard issue and its cost around 8k Indian rupees now i am fouked so help me to this

did you manage to fix it?

Related

Redmi note 3 snapdragon bricked

Hello,
i have redmi note 3 snapdragon variant. i had installed cyanogen mod 13 kenzo in my phone. for some reason i wnanted to get back to the stock version. so i flashed stock rom from twrp which resulted in boot loop.
i tried flashing rom again from mi flash in edl mode. but it still wont boot. mi logo comes and then power off. what can i do? please help.
I did the same thing I flashed MIUI from TWRP when using cyanogen mod ROM. But when I clicked on reboot to system after flashing the ROM which showed "done" it warned saying there is no OS to boot to and stayed at Mi logo. Thankfully I backed up the previous ROM before starting the procedure so, I went to recovery(TWRP) vol up+ pwr and had reset the phone and flashed that backed up file. It worked. So, my advise is try to go in to recovery re-flash any backed up file or any custom ROM.
check ur bl status bro
It's happened with me many times ...there is a no big issue I guess , just check if ur bl status is unlock or not ..I guess ur bootloader must be locked that's why this is happening to check just put ur phn is fastboot mode connect usb cable n type in adb n fastboot command
Fastboot devices
Then
Fastboot device oem-info
. If locked unlock it using mi unlock tool

No Solution. Boot up to Android not possible

I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.

problem with mate 10 pro

hello I flashed my mate 10 pro to pie rom and everything works. but I flash magisk 16 from twrp and now my phone don't work any more I flash kernel back to but now he reboot evertime to e-recovery but I can not download new rom from wifi.. my bootloader is unlocked frp unlock, to I try dc phoenix but no luck I get this
Looking for a device in fastboot mode
Device found: AQH7N17A27005761
9-12-2018 19:06:54 Starting to write device in FASTBOOT mode...
Device found: AQH7N17A27005761
Cannot get IMEI from device
Build number: :BLA-L29 9.0.0.161(C432E4R1P11)
Product model: BLA-L29
Batery state: 6485mv
Device not supported
Process was cancelled by user
how I can reboot this phone again,.
thanks a lot for the help
you cant just install a rom.img in fastboot mode?

moto g3(xt-1550) unable to enter recovery mode bootloader unlocked year ago

I was using AOSPE rom and got new email id from office while adding new email got error saying can not add this email id without encrypting the device. For 3 hrs, it was stuck on 100% then the battery died I turn on the device again and promote screen for the password I didn't know which one to enter so I enter Gmail password. 'Encrypting unsuccessful Password is correct but data is corrupt reset phone to decrypt device' there was no any other options so I proceed like this
1) factory reset -> yes -> swipe
2) advance wipe /system /data /data/media /cache etc.
2) flash last rom I was using(AEX)
3) flash gapps
4) reboot the device.
after a reboot on the setup device screen, com.android.phone and google services framework stop working continuously so from step 2 I tried RR rom but no luck :crying: then flash stock rom and reboot device got in a boot loop :crying::crying: so holding vol. down and power button I am able to enter in bootloader screen but as I enter in recovery mode getting no command screen and adb not detecting the device.
what should I do? how can I get recovery mode back? teamwin or any other?
Hi , if your are able to boot into bootloader , just plug your device and write :
fastboot device
(just to make sure that your device is detected)
Now , from your stock firmware extract just recovery.img and put inside minimal adb & fastboot folder
now open terminal and write :
fastboot flash recovery recovery.img
(in order to flash back your stock recovery)
now write fastboot reboot
More explained you have here:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
stock firmware:
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
XT1550 (Dual-SIM)
Good luck

Why i cant access fastboot mode?

hey guys ive installed custom rom on my officially unlocked redmi note 3(kenzo). Recently i tried to reboot my phone and it stucked in bootloop so i entered pitch black recovery but it shows error e recv error on uevent . i googled and found solution to install twrp 3.1.1. phone rebooted and system was working fine but i cant access my recovery. when i boot into recovery device automatically reboots in system. also my fastboot mode is missing it shows a linux penguine and my phone is not getting detected as a fastboot device but its having a system on it. Any solutions to get recovery and fastboot bunny back??
paramtap said:
hey guys ive installed custom rom on my officially unlocked redmi note 3(kenzo). Recently i tried to reboot my phone and it stucked in bootloop so i entered pitch black recovery but it shows error e recv error on uevent . i googled and found solution to install twrp 3.1.1. phone rebooted and system was working fine but i cant access my recovery. when i boot into recovery device automatically reboots in system. also my fastboot mode is missing it shows a linux penguine and my phone is not getting detected as a fastboot device but its having a system on it. Any solutions to get recovery and fastboot bunny back??
Click to expand...
Click to collapse
How u got linux penguin?
Did u flash any boot logo splash zip ?
Black_Stark said:
How u got linux penguin?
Did u flash any boot logo splash zip ?
Click to expand...
Click to collapse
Nope. As i mentioned. I just flashed twrp version 3.1.1 bc my phone was not booting up.
paramtap said:
Nope. As i mentioned. I just flashed twrp version 3.1.1 bc my phone was not booting up.
Click to expand...
Click to collapse
Then put phone in edl mode and flash fastboot miui rom.
And use latest twrp 3.3.3 for kenzo
Black_Stark said:
Then put phone in edl mode and flash fastboot miui rom.
And use latest twrp 3.3.3 for kenzo
Click to expand...
Click to collapse
How to put my phone in edl mode? Its not getting detected in fastboot mode. Though its been recognised as adb device when phone is turned on.
paramtap said:
How to put my phone in edl mode? Its not getting detected in fastboot mode. Though its been recognised as adb device when phone is turned on.
Click to expand...
Click to collapse
Then ask on telegram group for kenzo or redmi note 3. Someone will help u.

Categories

Resources