hello I flashed my mate 10 pro to pie rom and everything works. but I flash magisk 16 from twrp and now my phone don't work any more I flash kernel back to but now he reboot evertime to e-recovery but I can not download new rom from wifi.. my bootloader is unlocked frp unlock, to I try dc phoenix but no luck I get this
Looking for a device in fastboot mode
Device found: AQH7N17A27005761
9-12-2018 19:06:54 Starting to write device in FASTBOOT mode...
Device found: AQH7N17A27005761
Cannot get IMEI from device
Build number: :BLA-L29 9.0.0.161(C432E4R1P11)
Product model: BLA-L29
Batery state: 6485mv
Device not supported
Process was cancelled by user
how I can reboot this phone again,.
thanks a lot for the help
you cant just install a rom.img in fastboot mode?
Related
Hi guys! I am very sad with all this. I had bought a xiaomi rerdmi note 3 snapdragon and I wanted to flash Miui 8 thinking that I had kenzo versión. It flash succesfully and the cellphone boots just I lost signal (not imei) and any sensor works. I had finally discovered that I have kate version after a few days. Now cellphone works fine but I couldn't solve mi ril problem. It recognize muy sin card but It says "no service" I really need your help :crying: :crying: :crying:
Restore efs partition of kenzo mobile
yogesh1970 said:
Restore efs partition of kenzo mobile
Click to expand...
Click to collapse
IT WORKS!!! Thank you bro
Unable to flash any twrp or rom in KATE
My redmi note 3 KATE unlock story so far:
- Tried to unlock the official way -> no success
- Tried to unlock the unofficial way (KATE fastboot) -> success
- Figured out that there were new section in oem info which told "critical unlock" was false
- Unlocked the critical unlock to true
- Flashed *alka twrp -> got errors when trying the advanced wipe as pumpino's guide suggested
- Tried to flash many different twrps but no success to boot them -> only fastboot mode worked
- Tried to flash the latest KATE fastboot with mi flash tool -> error: product name mismatch (or something like that)
- Tried to flash the latest KENZO fastboot with mi flash tool -> success but sim card failure (imei lost?)
- Unlocked the unofficial way and flashed coffice twrp -> no success, only fastboot mode working
- Removed the getvar name check from KATE fastboot and flashed it -> error while flashing the system img
- Flashed KENZO fastboot without the name check
Now I can boot to adb mode with vol- & power, and to fastboot mode with vol+ & power. Normal boot starts the phone but ends into chinese screen where is only one button to press and then it boots again to the same chinese screen.
Any suggestions?
pokspaks said:
My redmi note 3 KATE unlock story so far:
- Tried to unlock the official way -> no success
- Tried to unlock the unofficial way (KATE fastboot) -> success
- Figured out that there were new section in oem info which told "critical unlock" was false
- Unlocked the critical unlock to true
- Flashed *alka twrp -> got errors when trying the advanced wipe as pumpino's guide suggested
- Tried to flash many different twrps but no success to boot them -> only fastboot mode worked
- Tried to flash the latest KATE fastboot with mi flash tool -> error: product name mismatch (or something like that)
- Tried to flash the latest KENZO fastboot with mi flash tool -> success but sim card failure (imei lost?)
- Unlocked the unofficial way and flashed coffice twrp -> no success, only fastboot mode working
- Removed the getvar name check from KATE fastboot and flashed it -> error while flashing the system img
- Flashed KENZO fastboot without the name check
Now I can boot to adb mode with vol- & power, and to fastboot mode with vol+ & power. Normal boot starts the phone but ends into chinese screen where is only one button to press and then it boots again to the same chinese screen.
Any suggestions?
Click to expand...
Click to collapse
Answer to myself:
As long as you can boot to fastboot, you are pretty much safe. You can boot to edl-mode and flash the (kate) fastboot rom using the mi flash tool.
nachonv said:
Hi guys! I am very sad with all this. I had bought a xiaomi rerdmi note 3 snapdragon and I wanted to flash Miui 8 thinking that I had kenzo versión. It flash succesfully and the cellphone boots just I lost signal (not imei) and any sensor works. I had finally discovered that I have kate version after a few days. Now cellphone works fine but I couldn't solve mi ril problem. It recognize muy sin card but It says "no service" I really need your help :crying: :crying: :crying:
Click to expand...
Click to collapse
i'm in the same condition, didn't know that i have kate device and i flashed kenzo rom. I didn't understand how to solve. Help me please! i have locked bootloader
solved today, flashed keto global and worked
petrov.eduard90 said:
i'm in the same condition, didn't know that i have kate device and i flashed kenzo rom. I didn't understand how to solve. Help me please! i have locked bootloader
Click to expand...
Click to collapse
i have same problems, do you have been solved your problem ?
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
I install an service full repair stock via dload
http://androidhost.ru/v5
it is working right now.
oblivion2222 said:
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
Click to expand...
Click to collapse
You can always re-unlock your phones bootloader again, the key is always same, then flash or boot twrp with fastboot.
Some developers says the command for oreo is: fastboot flash recovery_ramdisk [file name] but I used this: fastboot flash recovery_ramdisk_a [file name]
You even can try to just boot twrp without flashing it to your recovery by simple typing: fastboot boot [file name]
If fastboot can flash twrp, turn your phone off then hold volume up/+ and power button same time and hold them until the state of unlocked warning appears.
You can use dload method or you can use HuRupdater method to flash firmware. You'll find introduction for how to do it.
Just search on xda
Hello everybody.
I have a BLA-L29 C636 and I'm trying to flash BLA-L29C_8.0.0.115(C636) in DC Phoenix, but Phoenix still says after extracting the update.app:
Build number: :BLA-L29 8.0.0.131(C636)
Product model: BLA-L29
Device not supported
At the beginning it says:
Looking for a device in fastboot mode
Device found: MYSERIALNUMBER
Starting extracting partitions from file UPDATE.APP
Current version: BLA_Global_C999
I think the problem is that undefined version of BLA_Global_C999, so that Phoenix thinks I'm not on a BLA-L29 C636. Any ideas?
Edit: I came from Lineage OS to Stock Rom by HWOTA8_Mate10. After flashing was succesful I had a blackout and installed Magisk before changing OEM-Unlock in the developer-settings. -.- So my Mate 10 Pro stucked in a bootloop to eRecovery. Bootloader is locked (code is here) and FRP is also locked. So my only way is in my opinion DC Phoenix. But Phoenix still says "device not supported".
I fixed it on my own, but I really don't know what it was. Maybe someone has the same problem in the future, so I want to show my way of solving it.
I used DC Phoenix v56 (latest v57 didn't fixed it that way) in Advanced Mode and the function for flashing the update.app out of update_all_hw.zip. First I put my Mate 10 Pro in Upgrade Mode by holding VolUp + VolDown + Powerbutton. After Emui-Update-Screen was shown, I connect my Mate to the PC and pressed the Update-Button in DC Phoenix. Phoenix searched for phones in Upgrade-Mode, finally found it and flashed the correct update.app. After rebooting and a factory reset my Mate booted into the system and all was fine. Also since that, Phoenix recognize my Mate as a BLA-L29 C636 and not as a BLA_GLOBAL_C999.
Hi everyone
A friend gave me a demo unit of a huawei Y6 2019 (MRD-LX1) and I wanted to flash it with a stock rom (not a demo rom)
I double check when i took the stock rom file(https://www.getdroidtips.com/stock-rom-huawei-y6-2019/) and I flashed with SP flash tools
Since then this huawei Y6 only boots on a black screen and get a bootloop
Any idea to unbrick it ?
I tried : recovery mode
USB recovery mode with the dload folder in a USB stick) It seems that the rom is not recognised
The only mode that I can use is the Fastboot recovery but I can't do much in this mode since the bootloader is locked
Thank you.
I have realme 3 pro and my bootloader was unlocked skme days ago i accendenatlly flash some malware application and then my device switch of and bootloop on custom rom logo then i tried to go in fastboot mode but its again bootloop in fastboot logo However i tried to boot in device then i see my network did not show and my wifi also no working then i format my rom amd change roms but its booting but not going in fastboot mode (i go to recovery through adb cammands) then some tell me go to stock rom i flash it through recovery (Remember i cant go to fastboot mode i go to recovery through adb cammands) and i flash the the stock rom after flash stock rom then my device did not setup becouse of network then i pass it out through *#813# now in my device not showing any type of signal expect Bluetooth and did not boot into fastboot and now it have stock revovery and also my imei no and baseband version is null before i am in twrp whenever i flash something then show me a eror "failed to mount presis file" like this but i also visit service centre but they flash Rui 2.0 and i talk him about signal and imei no but they telling its motherboard issue and its cost around 8k Indian rupees now i am fouked so help me to this
did you manage to fix it?