hi guys, i'm new in the forum, so can you help me with my problem.
when i was in my car, my honor 8 (MM,6.0)send me a notification about the new OS (nougat 7.0) well i have done a roolback to android 6.0, because i have read in a article to do this but the article was incorrect because you have to do the rollback only from 7.0 and not from 6.0. after all my phone start to restart several times and when i tryed to restart it in eRecovery (vol+ and vol- power) it would not start, i can't enter in recovery mode, i have already tryed dc unlocker but nothing, and when i try to type something in adb fastboot the pc send me a message like this: failed (remote command not allowed).i have already tryed dload folder but nothing
pfuu my phone got bricked... could you help me with something?
please.
hello guys,
i have a problem with my huawei mate 10 lite and i need your help please. there is no operating system on my phone and i cant install one.
device:
RNE-L21C432
aktually:
- bootloader is unlocked (phone unlocked + FRP locked)
- twrp is installed
- adb modus only works in twrp, but not at fastboot modus (it shows me no attached device)
i tried:
- Huawei eRecovery -> failed after 5%
- recovery over hisuite -> no succes
i tried to flash an new os:
- flash a custom rom with twrp, it works, but at the end of the setup it brings me every time to the start of the setup
- installation of the stock rom with vol up + vol down + powerbutton (dload) -> no succes (software install failed!)
- create images with huawei rom extractor and flashing with twrp -> no succes
when i try to flash a stock rom, did i need a stock recovery for this?
i hope you can help me.
thanks
breaked
i am now on the sam problem about 1 week please need a solution if you have
med ouj said:
i am now on the sam problem about 1 week please need a solution if you have
Click to expand...
Click to collapse
Have you tried: https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
Or https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I would try HWOTA first.
hello I flashed my mate 10 pro to pie rom and everything works. but I flash magisk 16 from twrp and now my phone don't work any more I flash kernel back to but now he reboot evertime to e-recovery but I can not download new rom from wifi.. my bootloader is unlocked frp unlock, to I try dc phoenix but no luck I get this
Looking for a device in fastboot mode
Device found: AQH7N17A27005761
9-12-2018 19:06:54 Starting to write device in FASTBOOT mode...
Device found: AQH7N17A27005761
Cannot get IMEI from device
Build number: :BLA-L29 9.0.0.161(C432E4R1P11)
Product model: BLA-L29
Batery state: 6485mv
Device not supported
Process was cancelled by user
how I can reboot this phone again,.
thanks a lot for the help
you cant just install a rom.img in fastboot mode?
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.
Hi, I have a semibrick on my X3 Superzoom (Global), and I can't seem to restore the original firmware. When it was working properly, I think the phone was updated to the latest version available in Europe (RMX2081EU_11.A.50), hence Realme UI 1.0.
I do not remember very well what I did, it's been a few weeks since my "screw up", I must have flashed an untrusted firmware, the thing is that when rebooting the screen looks black and goes into a continuous bootloop, but allows to enter fastboot mode with power + Vol down (I know because I can launch fastboot commands). Curiously, when it goes into bootloop you don't see the Realme logo, I discovered that the logo is there but with the screen illumination at minimum, and you can only glimpse a little if you put it under a lamp. Very strange.
Since it can go into fastboot mode I have tried flashing several firmwares for my phone, RMX2086 and none of them repair brik. I have tried always by command line because with MsmDownloadTool I don't have login access and with Realme Flash Tool always shows error "cannot find central directory", I have tried also with QFil and I can't get it to stay stable on the port.
I flash with command line with "fastboot flash" all .img files of super, recovery, boot, boot, dtbo, vbmeta (in that order) but it does nothing. Furthermore, I have tried with several ofp files like for example the following file from realmefirmware.com, which seems to be the last released full version of Realme UI 2.0 (I have tried also with Realme UI 1.0 versions):
RMX2086GDPR_11_C.11_2022011318270168.zip (I decrypt the ofp file inside to extract the .img files.).
Interestingly, I can flash TWRP Recovery (it works, and you see the screen with normal TWRP recovery) and from the recovery I can flash a Custom Recovery like PixelPlusUI. The phone boots (no logo visible) in CustomROM normally, but after a while of use the screen turns off but working ROM.
What should I do? Although I have some flashing experience, I'm pretty much stuck. Can anyone give me any suggestions?
Sorry with making it so long, but I wanted to explain this as best as possible so it is well understood.
When you already upgrades to Android 11, you can not flash custom rom, otherwise it bricks, because all the custom roms required android 10 ROM system, you may downgrade using flash tool (I tried but failed to flash any stock rom using any tool, only able to flash using fastboot commands)
bernarbernuli said:
Hi, I have a semibrick on my X3 Superzoom (Global), and I can't seem to restore the original firmware. When it was working properly, I think the phone was updated to the latest version available in Europe (RMX2081EU_11.A.50), hence Realme UI 1.0.
I do not remember very well what I did, it's been a few weeks since my "screw up", I must have flashed an untrusted firmware, the thing is that when rebooting the screen looks black and goes into a continuous bootloop, but allows to enter fastboot mode with power + Vol down (I know because I can launch fastboot commands). Curiously, when it goes into bootloop you don't see the Realme logo, I discovered that the logo is there but with the screen illumination at minimum, and you can only glimpse a little if you put it under a lamp. Very strange.
Since it can go into fastboot mode I have tried flashing several firmwares for my phone, RMX2086 and none of them repair brik. I have tried always by command line because with MsmDownloadTool I don't have login access and with Realme Flash Tool always shows error "cannot find central directory", I have tried also with QFil and I can't get it to stay stable on the port.
I flash with command line with "fastboot flash" all .img files of super, recovery, boot, boot, dtbo, vbmeta (in that order) but it does nothing. Furthermore, I have tried with several ofp files like for example the following file from realmefirmware.com, which seems to be the last released full version of Realme UI 2.0 (I have tried also with Realme UI 1.0 versions):
RMX2086GDPR_11_C.11_2022011318270168.zip (I decrypt the ofp file inside to extract the .img files.).
Interestingly, I can flash TWRP Recovery (it works, and you see the screen with normal TWRP recovery) and from the recovery I can flash a Custom Recovery like PixelPlusUI. The phone boots (no logo visible) in CustomROM normally, but after a while of use the screen turns off but working ROM.
What should I do? Although I have some flashing experience, I'm pretty much stuck. Can anyone give me any suggestions?
Sorry with making it so long, but I wanted to explain this as best as possible so it is well understood.
Click to expand...
Click to collapse
Have you found solution? I have exactly the same problem!
maskalicz said:
Have you found solution? I have exactly the same problem!
Click to expand...
Click to collapse
It's been over a year since it happened, I didn't find a solution on my own, and since it was still under warranty, I sent it to the official technical service and a couple of weeks later I received it back with the firmware working.