hello guys,
i have a problem with my huawei mate 10 lite and i need your help please. there is no operating system on my phone and i cant install one.
device:
RNE-L21C432
aktually:
- bootloader is unlocked (phone unlocked + FRP locked)
- twrp is installed
- adb modus only works in twrp, but not at fastboot modus (it shows me no attached device)
i tried:
- Huawei eRecovery -> failed after 5%
- recovery over hisuite -> no succes
i tried to flash an new os:
- flash a custom rom with twrp, it works, but at the end of the setup it brings me every time to the start of the setup
- installation of the stock rom with vol up + vol down + powerbutton (dload) -> no succes (software install failed!)
- create images with huawei rom extractor and flashing with twrp -> no succes
when i try to flash a stock rom, did i need a stock recovery for this?
i hope you can help me.
thanks
breaked
i am now on the sam problem about 1 week please need a solution if you have
med ouj said:
i am now on the sam problem about 1 week please need a solution if you have
Click to expand...
Click to collapse
Have you tried: https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
Or https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I would try HWOTA first.
Related
Hi guys! I am very sad with all this. I had bought a xiaomi rerdmi note 3 snapdragon and I wanted to flash Miui 8 thinking that I had kenzo versión. It flash succesfully and the cellphone boots just I lost signal (not imei) and any sensor works. I had finally discovered that I have kate version after a few days. Now cellphone works fine but I couldn't solve mi ril problem. It recognize muy sin card but It says "no service" I really need your help :crying: :crying: :crying:
Restore efs partition of kenzo mobile
yogesh1970 said:
Restore efs partition of kenzo mobile
Click to expand...
Click to collapse
IT WORKS!!! Thank you bro
Unable to flash any twrp or rom in KATE
My redmi note 3 KATE unlock story so far:
- Tried to unlock the official way -> no success
- Tried to unlock the unofficial way (KATE fastboot) -> success
- Figured out that there were new section in oem info which told "critical unlock" was false
- Unlocked the critical unlock to true
- Flashed *alka twrp -> got errors when trying the advanced wipe as pumpino's guide suggested
- Tried to flash many different twrps but no success to boot them -> only fastboot mode worked
- Tried to flash the latest KATE fastboot with mi flash tool -> error: product name mismatch (or something like that)
- Tried to flash the latest KENZO fastboot with mi flash tool -> success but sim card failure (imei lost?)
- Unlocked the unofficial way and flashed coffice twrp -> no success, only fastboot mode working
- Removed the getvar name check from KATE fastboot and flashed it -> error while flashing the system img
- Flashed KENZO fastboot without the name check
Now I can boot to adb mode with vol- & power, and to fastboot mode with vol+ & power. Normal boot starts the phone but ends into chinese screen where is only one button to press and then it boots again to the same chinese screen.
Any suggestions?
pokspaks said:
My redmi note 3 KATE unlock story so far:
- Tried to unlock the official way -> no success
- Tried to unlock the unofficial way (KATE fastboot) -> success
- Figured out that there were new section in oem info which told "critical unlock" was false
- Unlocked the critical unlock to true
- Flashed *alka twrp -> got errors when trying the advanced wipe as pumpino's guide suggested
- Tried to flash many different twrps but no success to boot them -> only fastboot mode worked
- Tried to flash the latest KATE fastboot with mi flash tool -> error: product name mismatch (or something like that)
- Tried to flash the latest KENZO fastboot with mi flash tool -> success but sim card failure (imei lost?)
- Unlocked the unofficial way and flashed coffice twrp -> no success, only fastboot mode working
- Removed the getvar name check from KATE fastboot and flashed it -> error while flashing the system img
- Flashed KENZO fastboot without the name check
Now I can boot to adb mode with vol- & power, and to fastboot mode with vol+ & power. Normal boot starts the phone but ends into chinese screen where is only one button to press and then it boots again to the same chinese screen.
Any suggestions?
Click to expand...
Click to collapse
Answer to myself:
As long as you can boot to fastboot, you are pretty much safe. You can boot to edl-mode and flash the (kate) fastboot rom using the mi flash tool.
nachonv said:
Hi guys! I am very sad with all this. I had bought a xiaomi rerdmi note 3 snapdragon and I wanted to flash Miui 8 thinking that I had kenzo versión. It flash succesfully and the cellphone boots just I lost signal (not imei) and any sensor works. I had finally discovered that I have kate version after a few days. Now cellphone works fine but I couldn't solve mi ril problem. It recognize muy sin card but It says "no service" I really need your help :crying: :crying: :crying:
Click to expand...
Click to collapse
i'm in the same condition, didn't know that i have kate device and i flashed kenzo rom. I didn't understand how to solve. Help me please! i have locked bootloader
solved today, flashed keto global and worked
petrov.eduard90 said:
i'm in the same condition, didn't know that i have kate device and i flashed kenzo rom. I didn't understand how to solve. Help me please! i have locked bootloader
Click to expand...
Click to collapse
i have same problems, do you have been solved your problem ?
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Have you tried getting into the bootloader?
Do you have twrp?
lionboy33 said:
Have you tried getting into the bootloader?
Do you have twrp?
Click to expand...
Click to collapse
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
tHe_ImPrA said:
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
Click to expand...
Click to collapse
Neither do I .. Try to do power + vol down or vol up
lionboy33 said:
Neither do I .. Try to do power + vol down or vol up
Click to expand...
Click to collapse
If I do get into the bootloader what should I do next ?
tHe_ImPrA said:
If I do get into the bootloader what should I do next ?
Click to expand...
Click to collapse
Use hisuite to reinstall the firmware
Or you can get into fastboot and flash it.
Sent from my PLK-L01 using Tapatalk
tried many combinations to get into the bootloader with no luck
only black screen with vibrations
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
lakistrike95 said:
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
Click to expand...
Click to collapse
But this will void the warranty, and its not his own device so that should be the last option
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Get a sd card, create a folder called "dload" without quotes.
Copy the file update.app from the latest B380 into the folder.
Have your phone turned off and press vol+- and power until the screen turns on. It should update.
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
If you can not enter fastboot mode (power + vol down or vol down and connect to pc) take it to Huawei customer service center.
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
I install an service full repair stock via dload
http://androidhost.ru/v5
it is working right now.
oblivion2222 said:
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
Click to expand...
Click to collapse
You can always re-unlock your phones bootloader again, the key is always same, then flash or boot twrp with fastboot.
Some developers says the command for oreo is: fastboot flash recovery_ramdisk [file name] but I used this: fastboot flash recovery_ramdisk_a [file name]
You even can try to just boot twrp without flashing it to your recovery by simple typing: fastboot boot [file name]
If fastboot can flash twrp, turn your phone off then hold volume up/+ and power button same time and hold them until the state of unlocked warning appears.
You can use dload method or you can use HuRupdater method to flash firmware. You'll find introduction for how to do it.
Just search on xda
After successfull load rom for x5 max pro i want to install twrp for root and install miui 10.
i try
1. scatter files by flash tools - everything i do is step by step afetr instruction. At finish i have chineese bootloader afetr pressing vol - and power on
2. fastboot - i load recovery and there is the same situation as above
i try several files from internet
There is no result.
PLEASE help me. Where is my mistake ?
ok , i used vol + and power on but still no twrp
i have
recovery
fastboot
normal
Need Help!! Realme 1 stuck at Orange State Your phone is Unloaked & no longer secured
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
abhi.s4u said:
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
Click to expand...
Click to collapse
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
help
same problem bro please anyone can provie full backup without using of oppo download tool as it requires staff account :crying:
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
need help asap
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Same here..tried flashing using download tool but cnt,,any help appreciated
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
adityadtr said:
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
Click to expand...
Click to collapse
sorry bro i don't have backup of links...
go through this link u have to
download whole stock rom... i haven't tested it so do it on your own risk..
Mod edit: Link removed
Hello, I know i'm a bit late on this I had this problem recently and found out that flashing the latest ota update gets rid of the problem. The message wont disappear but the phone will boot properly. Just download the latest OTA update from the realme website and put it in you sd card and flash it from recovery. Also protip everytime you flash a file reboot manually not from adb fastboot as that leads to the bootloop.
Hope it helps.
after downloading latest OTA from realme website and tried flashing using recovery mode. installation failed is showing? sombody help!
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
bidhan001 said:
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Click to expand...
Click to collapse
mine same problem, did you solved the problem now?
please help if sombody has working solution/method, let me know. my realme 1 also facing same problem and tried flashing latest OTA update from official site but no luck showing installation failed:crying::crying:.
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
StripsOfTatti said:
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
Click to expand...
Click to collapse
ok i hv find this video.. plz check
Mod edit: Link removed
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro I have the same problem please help if u fixed it in phone when I opening the recovery mode it showing"Oppo verify pass fastboot_unlock_verify ok".
How to fix it bro
realme 1 problem
plz help me i cannot get into recovery mode on realme 1 and it is stuck in logo and orange state and restart over and over
I have same problem when i gone to REALME service centre they told me that we can not fix this because it is root and they were saying it can charge 5000-6000rs for motherboard and they said that it may be not work (Realme 1)
my phone is stuck on boot screen and i can not booting in recovery mod
what can i do please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please!please!please!please!please!please!please!please!please!please!please!please!please!please!please!please
same problem on realme u1
what should I do?
ASHISH12345677 said:
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
Click to expand...
Click to collapse
my number 7999809456 plzz help me out i am ready to pay u plzz
SarvinBatra said:
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
Click to expand...
Click to collapse
I was unlocked bootloader of Realme c2 and installed twrp patched file. Successfully installed. Now i unable to go to recovery mod. Showing ''5 second to reboot." And "Oppo verify pass ok". Please help me.