[Solved] Officially Unlocked, Custom Rom flashed. Will I ever need "EDL Mode"?
Officially Unlocked, Custom Rom flashed. Will I ever need "EDL Mode"?
Device: - RN3 Pro Rom: - xiaomi.eu 6.8.11 Kernel: - Radon V2.2
Note: - Device is fully operational and not bricked at present.
Edit: I believe my device was already installed properly, wasn't looking under "Ports" for it but other devices.
When I unplugged the device and reconnected I was getting the error below.
Been playing around to see if I could setup "Windows 10 AU" to see my device while in "EDL Mode".
It doesn't recognize the device in this mode. Device manager reports "Unknown USB Device (Device Descriptor Request Failed)" under USB controllers. Updating the driver doesn't work either.
I have both MiPCSuite and MiFlash installed.
Will I ever need EDL Mode in the future under the above conditions?
Above post updated.
Related
Hi all,
I have a rooted oneplus X with CM13 installed together with cyanogenmod recovery.
I update CM nightly build through the cyanogen update utility and then my phone would not boot.
I can boot to recovery mode and my phone is detected as unauthorized.
I can boot in fastboot mode but the device is not detected (I checked I had the correct drivers).
I then tried to sideload Oneplus ROM and CM13 ROM but it stops during the process. (device is recognized by adb as sideload).
Any ideas of what I could try ?
After a few hours I solved the issue by disabling windows 10 driver signature verification and selecting manually the Oneplus X USB driver. I was then able to flash TWRP in fastboot mode.
After flashing the preloader, the device is listed as "unknown" with a message "device descriptor request failed" in the device manager. That makes flashing it impossible, since SPFlashTool will not detect it. I have tried (re-)installing all the drivers, but with no success. I believe the phone is currently empty with only the preloader installed. Any help on this would be appreciated.
Processor : MTK6763
Device: Ulefone Power 5
(Supposed) Android version: 8.1
Dear all,
I am pretty sure "I am doing it wrong", but first let me explain what I am about to do:
My SGS2 (i9100)is basically only a watch since 3 years and lying around. So no problem if it's wasted...
I am about to get a Vacuum cleaner roboter and I want to use the App on my old SGS2 in a Guest network at home.
Therefore I try to update the OS on my phone in order to start the APP (which is not possible yet).
Problem:
My SGS2 is rooted and running CM 10.2-20131214 (It couldn't be updated before, always giving me errors so I left it with CM 10).
Now I would like to try to install TWRP in order to install a LineageOS on it (preferably the Version 16).
USB Debugging is activated and Root access is given to Apps and ADB. OEM Bootloader unlock option is not given (I guess because my phone is already rooted?).
- ADB is installed.
- I installed the most up to date Samsung USB driver and the phone shows up in the device manager.
- Odin 3.12.4_4 installed (also tried with 3.09)
I can start the bootloader via CMD and when I want to "fastboot flash recovery twrp.img" it stays in the "Waiting for device" line...
When trying to install TWRP with Odin it gives me a FAIL when using the only twrp.img.tar I could find on the internet so far...
Now I read something about an IsoRec compatible kernel and that I would have to repartion space on my card using "lanchon-repit-20170115-system=1.5G-data=max-sdcard=min+wipe-preload=min+wipe-i91000" (Lanchon repit) in order to install LineageOS (via TWRP I guess).
I have to admit I am a little confused on how to proceed going forward...
Can one of you give me some advice or link to a comprehensible guide on how to install that OS on the SGS2?
I can imagine that the problem with installing TWRP is my very outdated kernel version 3.0.64-CM-g9d16c8a from December 2013...
//edit: So I tried with ODIN <3.09, no change of situation.
I recognized that via console "adb devices" does list my device when operating in CM 10, but when I send "adb reboot bootloader" and it reboots (no mather if manually or via the command) "adb devices" doesn't list the phone anymore, although it is recognized in the device manager under "Modems -> SAMSUNG Mobile USB Modem" and "USB Controller -> SAMSUNG Mobile USB CDC Composite Device" ...
I have Redmi note note 5 pro and I rooted my device successfully on the version miui 11.0.3.0 with twrp recovery
and after root my device is unable to connect with any pc and laptop (tried everything from trying on multiple pc to buying new usb cables)
But It doesn't bothered me so I did nothing about it...but yesterday I tried to update my device to version miui 11.0.5.0 using full recovery rom but due to that my root access is gone with installing stock recovery .
And now every time when I try to enter into fastboot mode, it is not detecting my device (I've tried installing fastboot adb drivers and once again tried changing usb cable but it still not detecting).
Please help me I only want to install any custom recovery which help me root my device
Device - Redmi Note 5 pro
Android version - 9
Miui version - 11.0.5.0
USB debugging is on
bootloader is unlocked
How and how to restore the smart, please tell me.
"Frankenstein" from 996. Unlocked the bootloader, but could not overcome the safety net in magisk .. I flashed 998 30b, and then blocked the bootloader. Immediately upon startup, it writes a message in red font "Your device has failed a routine safety check and will not boot". It enters fastboot mode, it is seen by the computer as an andoid fastboot device. The fastboot devices command does not detect the device ... It enters the download / update mode - the computer does not see it in any way. I reinstalled the drivers. It costs win 10 64bit. Lgup 1.14.3... Help please.
art1901 said:
How and how to restore the smart, please tell me.
"Frankenstein" from 996. Unlocked the bootloader, but could not overcome the safety net in magisk .. I flashed 998 30b, and then blocked the bootloader. Immediately upon startup, it writes a message in red font "Your device has failed a routine safety check and will not boot". It enters fastboot mode, it is seen by the computer as an andoid fastboot device. The fastboot devices command does not detect the device ... It enters the download / update mode - the computer does not see it in any way. I reinstalled the drivers. It costs win 10 64bit. Lgup 1.14.3... Help please.
Click to expand...
Click to collapse
I have a similar situation...
have you resolved the problem? Need a new firmware I think...