Need Help: Best and stable custom ROM - Galaxy S III Q&A, Help & Troubleshooting

Hello guys!
I need help.
My Gf has a GT-I9305 and the stock KitKat ROM is buggy as hell.
Does some of you know a stable custom ROM for the GT-I9305 and maybe a good custom kernel (I was thinking about the Boeffla kernel)
It would be awesome if you guys would help me.
Thank you for reading
BurakkuShippu

try cm13.1

exe98123q said:
try cm12.1
Click to expand...
Click to collapse
There, i fixed it for you. Also try CM13.

i mean 13 relase 1 but ok

I think CM 13 Nightly is not stable (Nightly: usually generated every 24 hours, experimental, newest features, unstable)

Thank you guys!
I will try cm12.1 with ArchiKernel.

Related

[Q] STABLE ROM for GT-I9300

Hey guys,
I am searching for a ROM that is tested and really stable to run on my GT-i9300.
I've tried to install CM 12.1 for the S3 but it failed..
any recommendations? I've heard about ArchiDroid 3.0.2 ..is it .good?
thanks!
@PePeMoke: why do you hear, if you can read? All LP-ROMs here have bugs. Decide whether it matters for you.
rp158 said:
@PePeMoke: why do you hear, if you can read? All LP-ROMs here have bugs. Decide whether it matters for you.
Click to expand...
Click to collapse
Thanks for your reply.
Maybe I explained myself wrong.
I want to flash a ROM that works quite stable because the cm12.1 did not even install..
Some minor bugs don't matter to me.
Which one can you recommend?
@PePeMoke: Euphoria. Slim & stable.
Ya,Archidroid v3.0.2 is fast,stable,smooth for me TOP rom from CM11 ROMs,next Resurrection Remix 5.4.3 also fast,smooth,stable have more more configurations like navbar,status bar settings etc. with nova launcher is best LP ROM !

[L7 II P710] What's the best custom rom??

Hello guys, I am new and I don't know much info about phones etc. I own an LG L7 P710 and i have 4.1.2 android version but it lags so much even I have unistall "huge" apps and I have dones factory resets. So I would like to find a custom rom! But I don't know anything about these things So I would like to tell me what's the best rom for P710 is right now. If I have to post any further info of my info tell me! Sorry for my english and thanks for your time!
Cheers,
pronoobgr
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
TheBesterTester said:
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
Click to expand...
Click to collapse
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
manosper said:
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
Click to expand...
Click to collapse
Not skyinfo fixed the led. I did.
neutrondev said:
Not skyinfo fixed the led. I did.
Click to expand...
Click to collapse
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
manosper said:
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
Click to expand...
Click to collapse
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
neutrondev said:
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
Click to expand...
Click to collapse
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
manosper said:
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
Click to expand...
Click to collapse
Well performance costs battery the other portion is drained by wi-fi. Cm11 has also poor battery btw.
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
pronoobgr said:
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
Click to expand...
Click to collapse
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
neutrondev said:
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
Click to expand...
Click to collapse
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
pronoobgr said:
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
Click to expand...
Click to collapse
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
neutrondev said:
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
Click to expand...
Click to collapse
Ok then
purified stock 4.4.2

what 5.1 rom do you suggest (besides CM)

Hi there,
I used CM a long time on my s2, but I just cannot get CM 12.1 to boot on my device. I would like to try out 5.1 though, so do you have any suggestions for a nice stable rom that can be compared with CM?
karlrt said:
Hi there,
I used CM a long time on my s2, but I just cannot get CM 12.1 to boot on my device. I would like to try out 5.1 though, so do you have any suggestions for a nice stable rom that can be compared with CM?
Click to expand...
Click to collapse
Try Dirty-unicorns by arnab. It has a lot of features and is a favorite among some others. Unofficial CM is still more stable than official IMO, but official has some important fixes that makes it even better to use.
karlrt said:
Hi there,
I used CM a long time on my s2, but I just cannot get CM 12.1 to boot on my device. I would like to try out 5.1 though, so do you have any suggestions for a nice stable rom that can be compared with CM?
Click to expand...
Click to collapse
Dirty unicorns by arnab as it says @gsstudios and if you want of curse, i recommended you to try SlimLP by warior1208.

Stable Lollipop Rom For SGS3 (i9300)

Hello sir,
I need stable lollipop rom for my sgs3
Thank you in advance
Install newest version of Dokdo... For me the best rom for now. With builded in kernel, no boeffla or archi.
shephart said:
Install newest version of Dokdo... For me the best rom for now. With builded in kernel, no boeffla or archi.
Click to expand...
Click to collapse
How long have you been using this ROM?
UMAIR2015 said:
Hello sir,
I need stable lollipop rom for my sgs3
Thank you in advance
Click to expand...
Click to collapse
To the best of my knowledge there's no stable Lollipop ROM. All ROMs have their own bugs. Why not try the few Popular ROMs yourself?
shephart said:
With builded in kernel, no boeffla or archi.
Click to expand...
Click to collapse
All ROMs have a kernel
Behemoth1702 said:
How long have you been using this ROM?
Click to expand...
Click to collapse
Two weeks? LP are more stable than kitkat lol. Just snapchat videos dont work as always in aosp
shephart said:
Two weeks? LP are more stable than kitkat lol. Just snapchat videos dont work as always in aosp
Click to expand...
Click to collapse
Nah, in my device i tried multiple lollipops but they are were laggy. So i got back on the latest cm 11 and things are smooth as silk.
I'm staying off lollipop for now.
I don't care about the super latest features, I rather have a stable and secure system.
Sent from my GT-I9300 using Tapatalk
Both Temasek and ArchiDroid are very fast and stable. I haven't try out the new versions of RR and Blisspop yet
bhai archidroid karle latest wala set hai !
Hi,
Haxynox is actually pretty fast and thin. Discovered a bug, but cannot post it there. So i'm thinking of kinda spamming this place till i get my count up to 10
But in general, KitKat seems better choice for i9300 era systems. Would be nice, if someone compiled as close to aosp kitkat as possible. CM was close, but now really gets bloated with its additional software. It even has CM account system. Maybe i will test out Omni.
Omni is ok, but no theme support, same like slim kk

Hi i need kernel for 5.1 rom

Hey guys im looking for a good kernel like boefla kernel for nameless android 5.1 rom for i9300 can you suggest me a good one also it would be better if i can customize it like boefla kernel ty
xxgsliemrexx said:
Hey guys im looking for a good kernel like boefla kernel for nameless android 5.1 rom for i9300 can you suggest me a good one also it would be better if i can customize it like boefla kernel ty
Click to expand...
Click to collapse
I do not use nameless ROM but a quick look over the LP thread suggests Boeffla CM kernel could work with nameless. Have you tried? Just asking...
Anyway I would suggest Archi Kernel. Should work fine because it uses the AnyKernel method. Just be sure to flash it over the stock kernel that comes with your rom.
Hawaiihemd said:
I do not use nameless ROM but a quick look over the LP thread suggests Boeffla CM kernel could work with nameless. Have you tried? Just asking...
Anyway I would suggest Archi Kernel. Should work fine because it uses the AnyKernel method. Just be sure to flash it over the stock kernel that comes with your rom.
Click to expand...
Click to collapse
Why ? Dont you suggest nameless rom ? I tried it like 3 month ago and it was pretty good.Why you dont use nameless rom.Also can you suggest me lollipop 5.0 or 5.1 rom for i9300 (prefer stable).Im using some s6 rom with boefla kernel.Its pretty good since now.But i wanna some change you know Also this rom have som bugs which have to be fixed.Anyway cant i flash the kernel you suggested after i flashed cm or some lollipop rom ?
xxgsliemrexx said:
Why ? Dont you suggest nameless rom ? I tried it like 3 month ago and it was pretty good.Why you dont use nameless rom.Also can you suggest me lollipop 5.0 or 5.1 rom for i9300 (prefer stable).Im using some s6 rom with boefla kernel.Its pretty good since now.But i wanna some change you know Also this rom have som bugs which have to be fixed.Anyway cant i flash the kernel you suggested after i flashed cm or some lollipop rom ?
Click to expand...
Click to collapse
I just mentioned that because you wanted a kernel for nameless rom on LP and as I don't use it I wanted you to know that I'm not speaking from personal experience with that rom in particular. But the way it is built, ArchiKernel should work with every rom and people seem quite happy with it.
I personally use a sammy based KK rom at the moment because I like the UI, mainly for the looks not the performance...
If you want to try another non-sammy based rom other than nameless I would check ArchiDroid also developed by JustArchi as is ArchiKErnel.
Hawaiihemd said:
I just mentioned that because you wanted a kernel for nameless rom on LP and as I don't use it I wanted you to know that I'm not speaking from personal experience with that rom in particular. But the way it is built, ArchiKernel should work with every rom and people seem quite happy with it.
I personally use a sammy based KK rom at the moment because I like the UI, mainly for the looks not the performance...
If you want to try another non-sammy based rom other than nameless I would check ArchiDroid also developed by JustArchi as is ArchiKErnel.
Click to expand...
Click to collapse
Allright thx for the advices

Categories

Resources