guys I accidently flashed kernel over system partition, now the phone is stuck in bootloop and fastboot is not flashing files although its detecting it
vmalpha said:
guys I accidently flashed kernel over system partition, now the phone is stuck in bootloop and fastboot is not flashing files although its detecting it
Click to expand...
Click to collapse
Try to flash ftf in flash mode
dylanel98 said:
Try to flash ftf in flash mode
Click to expand...
Click to collapse
Thats the twisted part
flasher tool is detecting z2 in fastboot mode, but not in flash mode.. can i fix this on my own or should i take this service center?
Did you try the options in Flashtool by androxyde? You can flash a temporary kernel /w custom recovery via fastboot mode ( vol.+ ) and reformat the twisted partitions and power off the device so as to flash device .ftf afterwards.
Related
my xperia s 4.0 ICS official
bootloader unlocked for flashing CM9 i flashed boot.img from CM9 zip
fastboot flash boot boot.img
after that device stuck at xperia logo
i am not able to mount usbstorage also in recovery
how to get back to stock rom
completely turn it off, connect it to the pc in fastboot mode and flash another kernel and rom.
That should work.
Forgot to add that you can also download a ftf firmware and flash it using flashtool.
ginryu said:
completely turn it off, connect it to the pc in fastboot mode and flash another kernel and rom.
That should work.
Forgot to add that you can also download a ftf firmware and flash it using flashtool.
Click to expand...
Click to collapse
ok thanks flashed stock rom
then CM9
now can u tell me the best kernel for CM9
Good Mornig
:crying: I installed the latest Flyme rom on my Togari but now i can´t boot in to my recovery.
But if I boot into the Rom I don´t have Problems.
I only cant Boot to the Recovery and also i don´t can boot into fastboot or flashmode.
Sry for my English but im from Germany
If i try to boot into flashmode only the led is going for 1 sec. yellow and my phone turns off.
Also if i try to boot into fastboot, my Phone vibrates 3 times and then it turns off.
If I try to boot with the NDR Utils App into the Revovery, my Phone only makes a Bootloop.
I used this Rom :FlymeOS_4.5.1.1R C6833/02
and here is the thread :http://forum.xda-developers.com/xperia-z-ultra/development/rom-flymeos4-5-1-1r-c6833-02-t3165834
ADB is installed. The Phone is also Rooted. for Recovery i Used NDR Utils.
Thanks for Help
NDR utilities....I guess you are using NUTS XZU dual recovery well mate it clearly said that whenever you flash a rom using xz dual recovery....you will lose your recovery...there was a flashasble zip which needed to be flashed after flashing rom which won't erase your recovery
Now regarding your fastboot or flashmode.... Are the latest and proper drivers install....don't care about the led flashing does the PC detect the device In flashmode? If yes just reflash stock back using androxyede flashtool and make sure you install the new bootloader next time via Emma which has a separate recovery partition in it.....regards if you need any help feel free to PM
You can flash dual recovery or download twrp manager, follow instructions and you'll be granted twrp recovery
sairaj rane said:
NDR utilities....I guess you are using NUTS XZU dual recovery well mate it clearly said that whenever you flash a rom using xz dual recovery....you will lose your recovery...there was a flashasble zip which needed to be flashed after flashing rom which won't erase your recovery
Now regarding your fastboot or flashmode.... Are the latest and proper drivers install....don't care about the led flashing does the PC detect the device In flashmode? If yes just reflash stock back using androxyede flashtool and make sure you install the new bootloader next time via Emma which has a separate recovery partition in it.....regards if you need any help feel free to PM
Click to expand...
Click to collapse
thanks
The led was the problem, now i flashed twrp again and the latest cm.
Now its working.:victory:
IDK/King said:
thanks
The led was the problem, now i flashed twrp again and the latest cm.
Now its working.:victory:
Click to expand...
Click to collapse
Dont forget to flash new bootloader MM AND N roms can't be flashed on XZ dual recovery
I have done fasboot format of my phone and erased recovery. So i flashed boot.img of stock rom After flashing boot image i tried to reboot to recovery mode but it is stuck at boot logo. What should i do to boot into stock recovery? Thanks
As far as I know, the rmn3 doesn't have a stock recovery installed.
You can, however, use MiFlash to flash a MIUI ROM. Run through setup, and you should be able to flash a custom recovery from there.
But why?
akjain said:
I have done fasboot format of my phone and erased recovery. So i flashed boot.img of stock rom After flashing boot image i tried to reboot to recovery mode but it is stuck at boot logo. What should i do to boot into stock recovery? Thanks
Click to expand...
Click to collapse
People shift from stock recoveries to custom recoveries like TWRP! But why do u want to even do the vice versa?
ckflash09 said:
People shift from stock recoveries to custom recoveries like TWRP! But why do u want to even do the vice versa?
Click to expand...
Click to collapse
i want to unroot the device and now i am not able to flash custom recovery from fastboot mode. I m getting error as recovery partiton missing or not found
Try this way!
akjain said:
i want to unroot the device and now i am not able to flash custom recovery from fastboot mode. I m getting error as recovery partiton missing or not found
Click to expand...
Click to collapse
Flash miui rom using miflash tool,, root access will be lost and whatever the problem is,, should be resolved! Then try flashing recovery using fastboot and make sure the driver's see properly installed on your pc! :cyclops:
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
AyalaE96 said:
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
Click to expand...
Click to collapse
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
raminta said:
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
Click to expand...
Click to collapse
I tried, and it didnt work...
AyalaE96 said:
I tried, and it didnt work...
Click to expand...
Click to collapse
Do you have unlocked bootloader???
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
yep
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
I solved it, I first must install Repack boot with "fastboot flash boot ...img"
After install recovery with "Fastboot flash recovery ...img"
My error Because I should read this first...
Dees_Troy said:
Note that the Z2, like most other Sony devices does not have a proper bootable recovery. As such you have to install a kernel that includes a recovery with it. For a time I will try to continue to supply updated stock kernels repacked with TWRP in them. If you are running one of my kernels or have a custom ROM like OmniROM installed, you can install TWRP in the FOTAKernel partition to stay on the latest version of TWRP.
Device page on our website
Mirror 1
Mirror 2
To install a stock kernel, boot the device into fastboot mode and then from your computer: fastboot flash boot path/to/filename.img
Click to expand...
Click to collapse
However is it true? With latest updates there was bootloader update which brings (or at least should as Sony said) /recovery partition (or more gives access to it, coz partitions was probably always there).
However how it exactly works? I always thought that onee flashed update with newest bootloader will leave new bootloader and this partition forever. But I got Z2 with .291, downgraded it to 4.4.2 for Root and TA backup and than tried to flash recovery to recovery partition, but got error: FAILED (data transfer failure (Unknown error)).
Does it mean that only on latest update(s) there is possibility to use this partition?
Never tried it on my ZU before. I just started form latest 5.1.1.
EDIT: OK, so what i assumed was right - on 6.0.1 I was able to flash the recovery to it's partition.
Now the problem is with booting into it. How? With Power + Vol- it still stright to boots to OS...
EDIT2: adb reboot recovery boots to different bootloader screen (Power+Vol- gives SONY screen and adb gives SONY + XPERIA screen.
However it still boots strght to Android...
Any idea what I'm doing wrong? I have 23.5.A.1.291 + unlocked bootloader + TWRP 3.0.2-0 (official) flashed with fastboot flash recovery img.
I'm 100% sure that SONY screen (w/o XPERIA) is the right one as I have identical one on my ZU when booting into bootloader-recovery mode. But why here it don't boot TWRP, but OS?
HELPPPP
Pleaseeeee tell me how did you flash twrp 3.0? I have tried almost everything it now seems impossible for me... Pleaseee helpp me T_T ... Thankk youuu
Hi everyone,
I tried to install Lineage OS on my Xperia Tablet Z Wifi and followed the instructions here: https://wiki.lineageos.org/devices/pollux_windy/install
I am on Ubuntu and I did unlock the bootloader successfully. Then I tried to flash twrp but this is where things went wrong.
After entering
Code:
fastboot flash boot ./twrp-3.5.2_9-0-pollux_windy.img
the device did not start anymore. I can still enter fastboot mode and the device is recognized on the PC but else the only thing that happens is the LED blinking red.
Any ideas where to go from here are appreciated.
Rootk1t said:
you flashed recovery to boot. So only recovery exists in boot section.
Of course tablet won't boot afterwards, as there is not kernel.
Download custom rom you want to install, unpack boot.img from roms zip files and flash via "fastboot flash boot boot.img"
Afterwards enter recovery and flash custom rom zip, gapps or whatever you need.
Click to expand...
Click to collapse
I tried this but flashing the boot.img does not change anything unfortunately.
brickedmytablet said:
I tried this but flashing the boot.img does not change anything unfortunately.
Click to expand...
Click to collapse
You can reflash stock ROM via Flashtool v.0.9.18.6. or flash another boot.img to check if it boots or not.
Thank you, this worked for me.
Should have used the right twrp form the beginning. flash to boot works if it is the right version in my case scorpion_windy