Hi everyone,
I tried to install Lineage OS on my Xperia Tablet Z Wifi and followed the instructions here: https://wiki.lineageos.org/devices/pollux_windy/install
I am on Ubuntu and I did unlock the bootloader successfully. Then I tried to flash twrp but this is where things went wrong.
After entering
Code:
fastboot flash boot ./twrp-3.5.2_9-0-pollux_windy.img
the device did not start anymore. I can still enter fastboot mode and the device is recognized on the PC but else the only thing that happens is the LED blinking red.
Any ideas where to go from here are appreciated.
Rootk1t said:
you flashed recovery to boot. So only recovery exists in boot section.
Of course tablet won't boot afterwards, as there is not kernel.
Download custom rom you want to install, unpack boot.img from roms zip files and flash via "fastboot flash boot boot.img"
Afterwards enter recovery and flash custom rom zip, gapps or whatever you need.
Click to expand...
Click to collapse
I tried this but flashing the boot.img does not change anything unfortunately.
brickedmytablet said:
I tried this but flashing the boot.img does not change anything unfortunately.
Click to expand...
Click to collapse
You can reflash stock ROM via Flashtool v.0.9.18.6. or flash another boot.img to check if it boots or not.
Thank you, this worked for me.
Should have used the right twrp form the beginning. flash to boot works if it is the right version in my case scorpion_windy
Related
I have the castor windy version 16gb SGP511. I was previously rooted but not unlocked. I unlocked the boot loader. Installed the twrp image on the pac man thread which i think was dual recovery cause Philz,Cwm came out, so I can install lollipop version of the rom. Made a backup of the stock rom. Followed this instructions - Install the Lollipop ROM + GApps+SuperSU using whatever Recovery you have.
- Turn off device completely.
- Press <Volume Up> and plug USB cable.
- LED should turn blue.
- Send command: "fastboot erase recovery"
- Send command for Castor_Windy: "fastboot flash recovery TWRP_Castor_Windy.img"
- Send command for Castor: "fastboot flash recovery TWRP_Castor.img"
- Unplug USB cable.
- Device will reboot.
- When LED turns pink press <Volume Up> and <Volume Down> several times.
- You should now see TWRP
I wasnt fast enough so stock rom booted. I used Adb reboot recovery to access recovery and did as the above mentioned. Wiped i tried to install the rom which failed. Rebooted back to system and got stuck in Sony boot up screen. I can access fastboot. Read though the forums I have to find a ftf or a system image file and use a flash tool. What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Kamaleon said:
What ftf file or system image my I use use which will let me root my device again.
Thanks Steve
Click to expand...
Click to collapse
Try this Xperia downloader tool. Should let you see which versions are which. If you want an easy root, then stay away from the KitKat builds, unless you want to unlock bootloader.
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Use Flashtool to flash your downloaded ftf file. Just make sure your device is charged.
http://forum.xda-developers.com/showthread.php?t=2335555
I believe flashtool will even install the drivers for your 511
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Kamaleon said:
Thanks for the reply. Flashed ftf file and my tablet is up an running. Do I have to unlock my bootloader again or is it unlocked already?
Click to expand...
Click to collapse
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Moscow Desire said:
Well, now this depends.
If you previously had KK running, and flashed a original version JellyBean ROM, then it probably locked the bootloader again.
If you flashed the same version as you had previously installed, then it didn't lock it again.
Click to expand...
Click to collapse
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Kamaleon said:
Thanks. Yes i was unlocked already, went through the process again to verify. Trying to upgrade my firmware which is 17...........402. to a kk build firmware. I have the old cwm recovery 6.0.4.6. being trying to upgrade or even change recovery to any recovery except dual recovery. Through fastboot which none of them stick. Fastboot erase recovery
fastboot flash recovery recovery.img all of them(CWM,TWRP,PHILZ). The process goes smoothly but when I access recovery the old recovery comes up. What seems to be problem? I cant change my recovery or even upgrade it. I never have had this problem before some insight needed before i take a wrong turn. LOL.
Click to expand...
Click to collapse
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Moscow Desire said:
You mean the "factory" recovery comes up.
Well, just for info, you don't need to run the fastboot "erase" command when installing a recovery. Not necessary as the new image file will overwrite the existing.
Also, you don't exactly need to flash a recovery either. You can connect via USB, boot to bootloader, and run the "fastboot boot recovery.img (or whatever you named it) as long as your custom recovery is in the same folder as the fastboot.exe. This will just the custom recovery without installing it, thus allowing you to flash stuff.
As to why your fastboot flash isn't sticking, I'm new to the Sony tab, so haven't learned all the quirks yet as compared to Acer tabs.
Click to expand...
Click to collapse
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Kamaleon said:
I mean cwm recovery v6.0.4.6 comes up the one I installed Doomlords thread with the advanced kernel. I ran fastboot erase recovery command to see if the new recoverys would stick and replace it but it didn't. I have done your instructions before hand thats how I am accessing the bootloader. "fastboot boot recovery.img all add this command to see If the new recovery would pop up. Thanks for the reply.
Click to expand...
Click to collapse
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Moscow Desire said:
Well, here's what I think is going on.
1. You installed Doomlords kernel. Note that this is a foto-kernel, which means the kernel itself has a partition that contains a recovery. What this means, is that as long a the fota-kernel was not replaced, then that specific recovery will be there.
2. You flashed a normal recovery. Now, I think this is there, but because of the fota-kernel, the fota-kernel is taking precedence.
Like I said, I don't know a lot about this Sony tab and the different partitions,as they are different from other tablets I am familiar with.
What puzzles me, is that if you flash a new "ftf" without changing any options in Flashtool, it "should" rewrite "every" partition on the tab, and install Stock recovery.
Now, based on my experience with Acer A500x and A700x tablets, I can say there are times when your issue happens. Rare, but it does happen. Things say they flash ok, but the old stuff still remains. The only option at that point, was to go back to a totally original version of the firmware.
Not sure I'm helping you on this. But the good thing, is that you can Fastboot Boot Recovery.
MD
Click to expand...
Click to collapse
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Kamaleon said:
I started from zero again flashed ftf Firmware SGP511_17.1.1.A.0.402. Verfied that i was bootloader unlocked I still was. Used fastboot to flash Dooms Kernel, without a problem used cwm revovery to flash Supersu. Tried to upgrade my firmware with the prerooted rooms in thread flashed with out a problem but no difference was provided. Verified in settings and initial firmware stands (SGP511_17.1.1.A.0.402). Tried to flash CM12 got stuck on a bootloop. Fastboot flashed the boot img provided didn't work for me so I flahed Teslas rom Followed instructions provided
1. Make sure you have CWM installed and a working nandroid backup
2. Download the ROM.
3. Place the ROM on your SD-Card.
4.Extract boot.img included in zip and fastboot flash it via Flashtool or CMD
5. Reboot to recovery.
6. Wipe data-factory reset/cache partition/dalvik cache
7. Flash the ROM.
Flash went through but when I try to access recovery through the rom or adb recovery doesnt come up. The tablet just stays black on recovery screen and the tablets led turns yellow. I have adb access so went to access fastboot flashed different recoverys. None of them (flashed without a problem), work but if a flashed Dooms I have access to recovery again, but loose functionality of the rom it gets stuck on sony screen. I have to do the steps all over again without a working recovery. This has being a learning experience I am HTC guy so the process with sony products is new to me as well. So where do you think I should go on from here; flash a newer ftf or lock and unlock my bootloader again to see if something happens or just move on jajajajj . Anyways thanks a lot for your help.
Click to expand...
Click to collapse
Well, I'm not sure which route to take.
However, I will tell you what I have learned the other day.
I have the 521 with unlocked bootloader. Rooted with my own boot.img, flashed SuperSU using "flashboot boot recovery.img" (yeah, sometimes it doesn't show on the display, so it takes a few times).
Now, other day I was going to check out the new LyPop pre-rooted. Fastboot flash recovery recovery,img, and it won't boot it to recovery like it should. Like it's not flashed. Tried it a couple times. Now, I didn't install the dual recovery as I'm not sure how that kernel (boot.img) will interact with my current tabs OS. Not to mention I need it for my work until tomorrow. But strangely it sounds like the same issue you have.
This weekend I will investigate it. As for me, I will probably flash the Stock ftf lyPop build, and just root it using a modified boot.img.
One thing I do know, is flashing a custom recovery to the "recovery" partition, doesn't seem to work like it used to work on other devices. It seems the flashing to the "Fota kernel" partition seems to be the only method that works. This is what happens when you flash that dual recovery, or any recovery that has a boot image using "Fota". Probably explains why you can't get rid of it using "fastboot erase recovery". because it's erasing the wrong partition. Only flashing a full ftf gets rid of it, because the ftf has a new FotaKernel it flashes.
Eh, something like that. Will look at it this weekend.
So I am stuck on TWRP 2.7.1.0 and i am running slimrom 4.4.4 on a c6833 and the reason for this is because it's the only thing that will boot on my phone. There was some intense trial and error a few months ago and a few days with a bricked phone but I finally got it running again, and I am nervous about messing things up again.
I am wanting to move to a more up to date ROM either scrubber port 5.1 or remix 5.1.1, but they both ask for updated TWRP to install. And I can't update TWRP using the TWRP tool from the store. It downloads but when it tries to install it says there is a problem. Previously, trying to update TWRP would result in SONY bootloops. I was about to try the dd method but just wanted to make sure it was safe.
I am a bit of an idiot (I got rid of my encrypted keys on day 2 of owning the phone) so any help would be appreciated.
Thanks!
walkingagh said:
...
Click to expand...
Click to collapse
The easiest way is to use Rashr. It should set everything up automatically. You may then reboot to recovery from the ROM, or by holding Vol- when the LED turns purple on boot-up.
If that doesn't work, for whatever reason, try dd or Flashtool. Using Flashtool, you can flash openrecovery-twrp-2.8.5.0-togari.img with the phone in Fastboot mode.
Let me know if you have any further questions!
Used Rashr...and now I can't get into recovery. I can still boot into my phone, but booting into recovery just fails with a yellow LED?
So Rashr still says I have 2.7.1.0 installed. :/
walkingagh said:
Used Rashr...and now I can't get into recovery. I can still boot into my phone, but booting into recovery just fails with a yellow LED?
Click to expand...
Click to collapse
Alright, you likely need a newer kernel first. Using Flashtool, you can flash this boot.img (newest AICP kernel) to the boot partition using the Fastboot mode (or use fastboot manually from the Flashtool/x10flasher_lib folder with "fastboot flash boot boot.img"). At this moment, you'll no longer be able to boot into the ROM, so make sure you've done all necessary backups and are ready to install a newer ROM. Then use Flashtool/Fastboot to flash the openrecovery-twrp-2.8.5.0-togari.img file to your recovery/FOTAKernel partition ("fastboot flash recovery openrecovery-twrp-2.8.5.0-togari.img"). You should be able to enter recovery now.
Awesome thanks! Will I need to do this each time I flash a ROM? Or can I just jump from something like scrubber to something else?
I know this is an old thread but is that the boot image I need to run TWRP 3? If so, can I do this via dd?
Triflot said:
Alright, you likely need a newer kernel first. Using Flashtool, you can flash this boot.img (newest AICP kernel) to the boot partition using the Fastboot mode (or use fastboot manually from the Flashtool/x10flasher_lib folder with "fastboot flash boot boot.img"). At this moment, you'll no longer be able to boot into the ROM, so make sure you've done all necessary backups and are ready to install a newer ROM. Then use Flashtool/Fastboot to flash the openrecovery-twrp-2.8.5.0-togari.img file to your recovery/FOTAKernel partition ("fastboot flash recovery openrecovery-twrp-2.8.5.0-togari.img"). You should be able to enter recovery now.
Click to expand...
Click to collapse
That file has expired, any chance you can re-post it?
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
AyalaE96 said:
I try to install .img file in recovery, but after install this, my phone shutdown in software brick....
Click to expand...
Click to collapse
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
raminta said:
Don't use install img option on twrp it may not work always
Instead of that you can flash recovery using fastboot with "fastboot flash recovery (the name of recovery).img) command
Click to expand...
Click to collapse
I tried, and it didnt work...
AyalaE96 said:
I tried, and it didnt work...
Click to expand...
Click to collapse
Do you have unlocked bootloader???
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
yep
raminta said:
Do you have unlocked bootloader???
Click to expand...
Click to collapse
I solved it, I first must install Repack boot with "fastboot flash boot ...img"
After install recovery with "Fastboot flash recovery ...img"
My error Because I should read this first...
Dees_Troy said:
Note that the Z2, like most other Sony devices does not have a proper bootable recovery. As such you have to install a kernel that includes a recovery with it. For a time I will try to continue to supply updated stock kernels repacked with TWRP in them. If you are running one of my kernels or have a custom ROM like OmniROM installed, you can install TWRP in the FOTAKernel partition to stay on the latest version of TWRP.
Device page on our website
Mirror 1
Mirror 2
To install a stock kernel, boot the device into fastboot mode and then from your computer: fastboot flash boot path/to/filename.img
Click to expand...
Click to collapse
However is it true? With latest updates there was bootloader update which brings (or at least should as Sony said) /recovery partition (or more gives access to it, coz partitions was probably always there).
However how it exactly works? I always thought that onee flashed update with newest bootloader will leave new bootloader and this partition forever. But I got Z2 with .291, downgraded it to 4.4.2 for Root and TA backup and than tried to flash recovery to recovery partition, but got error: FAILED (data transfer failure (Unknown error)).
Does it mean that only on latest update(s) there is possibility to use this partition?
Never tried it on my ZU before. I just started form latest 5.1.1.
EDIT: OK, so what i assumed was right - on 6.0.1 I was able to flash the recovery to it's partition.
Now the problem is with booting into it. How? With Power + Vol- it still stright to boots to OS...
EDIT2: adb reboot recovery boots to different bootloader screen (Power+Vol- gives SONY screen and adb gives SONY + XPERIA screen.
However it still boots strght to Android...
Any idea what I'm doing wrong? I have 23.5.A.1.291 + unlocked bootloader + TWRP 3.0.2-0 (official) flashed with fastboot flash recovery img.
I'm 100% sure that SONY screen (w/o XPERIA) is the right one as I have identical one on my ZU when booting into bootloader-recovery mode. But why here it don't boot TWRP, but OS?
HELPPPP
Pleaseeeee tell me how did you flash twrp 3.0? I have tried almost everything it now seems impossible for me... Pleaseee helpp me T_T ... Thankk youuu
I have a problem that i never make it into recovery again. I am used to adb/fastboot, this is my 5th device and i happily used different custom roms as lineage, havoc, crdroid for about 7 years and thus am familiar with the concepts of a/b, recovery, adb/fastboot and so on.
Now, when i "flash_all" with stock from here (V10.3.17.0.PFQEUXM) on my a3, i suppose both slots a and b are overwritten with stock. interestingly this stock rom only boots in a-slot, not in b-slot.
when i now just "fastboot flash recovery twrp...." with 3.3.1.2 and hit the manual enter to recovery (power + vol up), i just get a "no command" error - no twrp in sight.
i also tried this with flash_all V11.0.2.0.QFQEUXM rom (a10) and fastboot flash recovery twrp 3.3.1-17 Q from mauronofrio - same result.
anyone knows what i did wrong?
basically i didnt enter team win recovery for some good amount of tries which slightly terrifies me at this point. (help)
Should i use the global versions instead of the europe ones? Do i need to use "fastboot flash BOOT twrp.." instead of "fastboot flash recovery twrp.."?
I am also happy for suggestions where i could pose this issue more appropriate.
//update: i am now in stock rom and could root it with flashing a magisked boot.img but still cannot enter twrp recovery (-> "no command").
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
thanks @garylawwd
garylawwd said:
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
Click to expand...
Click to collapse
So to be sure: i have stock 11.0.3.0 europe from here installed and i am in slot a now and i cannot go into twrp because it says "no command".
i go to fastboot now, then
Code:
fastboot flash boot twrp.img
with a recent twrp that can run android 10 from here and then power + vol up without switching slots.
garylawwd said:
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
Click to expand...
Click to collapse
how can i flash a boot.img from twrp? i thought, i can only flash .zips from twrp? Also do i need to take spacial measures to be able to read internal memory in twrp?
//edit: i tried to flash named twrp but it wouldnt boot up into recovery, instead went straight into fastboot. so i flashed boot with stock boot again. no solution in sight.
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
_mysiak_ said:
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
Click to expand...
Click to collapse
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
tutankpusch said:
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
Click to expand...
Click to collapse
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
_mysiak_ said:
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
Click to expand...
Click to collapse
Thanks @mysiak_d
I used for example this method with this recovery bc it should work with android 10.
straight into fastboot instead recovery :/
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
------------------UPDATE---------------------------------
i am able to flash android 8.1 and run it but anything later then that reeboots to fastboot. cannot update from stock updater too. if i flash any firmware of PIE or later then it reeboots to fastboot.
rabin18181818 said:
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
Click to expand...
Click to collapse
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Retrial said:
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Click to expand...
Click to collapse
nope nothing
rabin18181818 said:
nope nothing
Click to expand...
Click to collapse
Okey, check the guide clean install official stock rom(to unbrick ur device) and then follow the guide clean install custom rom.