[ROM][RECOVERY] - Xiaomi Poco F1 Questions & Answers

bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
------------------UPDATE---------------------------------
i am able to flash android 8.1 and run it but anything later then that reeboots to fastboot. cannot update from stock updater too. if i flash any firmware of PIE or later then it reeboots to fastboot.

rabin18181818 said:
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
Click to expand...
Click to collapse
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.

Retrial said:
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Click to expand...
Click to collapse
nope nothing

rabin18181818 said:
nope nothing
Click to expand...
Click to collapse
Okey, check the guide clean install official stock rom(to unbrick ur device) and then follow the guide clean install custom rom.

Related

Recovery issue

I have done fasboot format of my phone and erased recovery. So i flashed boot.img of stock rom After flashing boot image i tried to reboot to recovery mode but it is stuck at boot logo. What should i do to boot into stock recovery? Thanks
As far as I know, the rmn3 doesn't have a stock recovery installed.
You can, however, use MiFlash to flash a MIUI ROM. Run through setup, and you should be able to flash a custom recovery from there.
But why?
akjain said:
I have done fasboot format of my phone and erased recovery. So i flashed boot.img of stock rom After flashing boot image i tried to reboot to recovery mode but it is stuck at boot logo. What should i do to boot into stock recovery? Thanks
Click to expand...
Click to collapse
People shift from stock recoveries to custom recoveries like TWRP! But why do u want to even do the vice versa?
ckflash09 said:
People shift from stock recoveries to custom recoveries like TWRP! But why do u want to even do the vice versa?
Click to expand...
Click to collapse
i want to unroot the device and now i am not able to flash custom recovery from fastboot mode. I m getting error as recovery partiton missing or not found
Try this way!
akjain said:
i want to unroot the device and now i am not able to flash custom recovery from fastboot mode. I m getting error as recovery partiton missing or not found
Click to expand...
Click to collapse
Flash miui rom using miflash tool,, root access will be lost and whatever the problem is,, should be resolved! Then try flashing recovery using fastboot and make sure the driver's see properly installed on your pc! :cyclops:

Problem with recovery installation (Kate) (Official unlock)

Hey!
I Have a Kate running latest global developer that i unlocked officially through the mi unlock program.
I have been trying to install TWRP ( unoffical twrp, Alka, coffee) through ADB ( fastboot flash recovery twrp.img) for some days now but i wont work!!
ADB dont displays any errors and says everything finished but when i try to boot to recovery it's still stock xiaomi recovery??
What might be the problem and how do i fix it?
BTW, adb reports that the phone is unlocked (fastboot oem device-info).
Are you trying to boot TWRP straight after flashing it. If your booting the official rom first, then that is restoring stock recovery.
After flashing TWRP, manually boot the device with Vol + and Power button.
Alternatively boot TWRP with "fastboot boot <twrp.img>" and from TWRP reboot to recovery again so you actually boot the version on the device.
the newest dev rom has "feature" to revert your recovery back to stock when you boot the OS. so be prepared. after you flash your twrp, immediately boot to TWRP and wipe /system to install other OS.
corkiejp said:
Are you trying to boot TWRP straight after flashing it. If your booting the official rom first, then that is restoring stock recovery.
After flashing TWRP, manually boot the device with Vol + and Power button.
Alternatively boot TWRP with "fastboot boot <twrp.img>" and from TWRP reboot to recovery again so you actually boot the version on the device.
Click to expand...
Click to collapse
IvanKurnia said:
the newest dev rom has "feature" to revert your recovery back to stock when you boot the OS. so be prepared. after you flash your twrp, immediately boot to TWRP and wipe /system to install other OS.
Click to expand...
Click to collapse
THANKS! That was the problem. Now everything works.

help! just bricked my MATE10 PRO.

i was on emui8.1 and trying to flash treble rom
i unblocked bootloader correctly like usual
i flash a treble rom like usual
but, cant boot to system. tried to go to recovery, cant boot to recovery neither.
tried to flash twrp , cant boot !
now i dont know what to do...
please help me.
can you boot into fastboot mode? from there you can flash the original rom
konopla4 said:
can you boot into fastboot mode? from there you can flash the original rom
Click to expand...
Click to collapse
i can boot into fastboot mode. but i used the HWOTA8 tool. it supposed to replace recovery, then boot to stock recovery, then do the installation ... but cant boot into recovery
craigzhong said:
i can boot into fastboot mode. but i used the HWOTA8 tool. it supposed to replace recovery, then boot to stock recovery, then do the installation ... but cant boot into recovery
Click to expand...
Click to collapse
I don't think hwota works with emui 8.1, it ought to be some differences in recovery compared to 8.0. You could try flashing TWRP https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904 then use HuRUpdater to go back to stock https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Ah, you can't even boot to TWRP.
But it might be due to Emui 8.1 as well. Try P20 twrp: https://forum.xda-developers.com/hu...recovery-twrp-3-2-1-0-touch-recovery-t3779336
How can to reload the original rom?
My BLA-L09C55B133 is bricked with FRP Lock and Bootloader Relocked, the eRecovery download the last firmware but the update stay freezed at 0%, and I don't know how to reload the Original Stock Rom already downloaded, the device don't have the sdcard slot! Please help me

Cannot enter Recovery any more - maybe switched too hastily between android 9 and 10?

I have a problem that i never make it into recovery again. I am used to adb/fastboot, this is my 5th device and i happily used different custom roms as lineage, havoc, crdroid for about 7 years and thus am familiar with the concepts of a/b, recovery, adb/fastboot and so on.
Now, when i "flash_all" with stock from here (V10.3.17.0.PFQEUXM) on my a3, i suppose both slots a and b are overwritten with stock. interestingly this stock rom only boots in a-slot, not in b-slot.
when i now just "fastboot flash recovery twrp...." with 3.3.1.2 and hit the manual enter to recovery (power + vol up), i just get a "no command" error - no twrp in sight.
i also tried this with flash_all V11.0.2.0.QFQEUXM rom (a10) and fastboot flash recovery twrp 3.3.1-17 Q from mauronofrio - same result.
anyone knows what i did wrong?
basically i didnt enter team win recovery for some good amount of tries which slightly terrifies me at this point. (help)
Should i use the global versions instead of the europe ones? Do i need to use "fastboot flash BOOT twrp.." instead of "fastboot flash recovery twrp.."?
I am also happy for suggestions where i could pose this issue more appropriate.
//update: i am now in stock rom and could root it with flashing a magisked boot.img but still cannot enter twrp recovery (-> "no command").
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
thanks @garylawwd
garylawwd said:
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
Click to expand...
Click to collapse
So to be sure: i have stock 11.0.3.0 europe from here installed and i am in slot a now and i cannot go into twrp because it says "no command".
i go to fastboot now, then
Code:
fastboot flash boot twrp.img
with a recent twrp that can run android 10 from here and then power + vol up without switching slots.
garylawwd said:
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
Click to expand...
Click to collapse
how can i flash a boot.img from twrp? i thought, i can only flash .zips from twrp? Also do i need to take spacial measures to be able to read internal memory in twrp?
//edit: i tried to flash named twrp but it wouldnt boot up into recovery, instead went straight into fastboot. so i flashed boot with stock boot again. no solution in sight.
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
_mysiak_ said:
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
Click to expand...
Click to collapse
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
tutankpusch said:
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
Click to expand...
Click to collapse
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
_mysiak_ said:
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
Click to expand...
Click to collapse
Thanks @mysiak_d
I used for example this method with this recovery bc it should work with android 10.
straight into fastboot instead recovery :/

Softbrick after twrp flash

Hi everyone,
I tried to install Lineage OS on my Xperia Tablet Z Wifi and followed the instructions here: https://wiki.lineageos.org/devices/pollux_windy/install
I am on Ubuntu and I did unlock the bootloader successfully. Then I tried to flash twrp but this is where things went wrong.
After entering
Code:
fastboot flash boot ./twrp-3.5.2_9-0-pollux_windy.img
the device did not start anymore. I can still enter fastboot mode and the device is recognized on the PC but else the only thing that happens is the LED blinking red.
Any ideas where to go from here are appreciated.
Rootk1t said:
you flashed recovery to boot. So only recovery exists in boot section.
Of course tablet won't boot afterwards, as there is not kernel.
Download custom rom you want to install, unpack boot.img from roms zip files and flash via "fastboot flash boot boot.img"
Afterwards enter recovery and flash custom rom zip, gapps or whatever you need.
Click to expand...
Click to collapse
I tried this but flashing the boot.img does not change anything unfortunately.
brickedmytablet said:
I tried this but flashing the boot.img does not change anything unfortunately.
Click to expand...
Click to collapse
You can reflash stock ROM via Flashtool v.0.9.18.6. or flash another boot.img to check if it boots or not.
Thank you, this worked for me.
Should have used the right twrp form the beginning. flash to boot works if it is the right version in my case scorpion_windy

Categories

Resources