Hello. i just got a Note S (Mediatek MT6580)
I'll get straight to the point. After using SP flashtool to flash Recovery.img (TWRP) from and getting in the recovery i realised that touch doesn't work. Neither i can do anything in it due to lack of non-touch way to move in it. Once i tried to use mouse by OTG and i managed to flash a rom but after that the touch didn't worked in the system neither. So i had to flash back to stock soft.
Is there any way to fix it?
MojaveAssassin said:
Hello. i just got a Note S (Mediatek MT6580)
I'll get straight to the point. After using SP flashtool to flash Recovery.img (TWRP) from and getting in the recovery i realised that touch doesn't work. Neither i can do anything in it due to lack of non-touch way to move in it. Once i tried to use mouse by OTG and i managed to flash a rom but after that the touch didn't worked in the system neither. So i had to flash back to stock soft.
Is there any way to fix it?
Click to expand...
Click to collapse
adb twrp to the phone and try to get a nandroid backup somewhere.
Related
Hi all I want to ask for your help on that and made a mistake when installing the application GooManager.
I happen to install the application on my tablet GooManager back to my current rom, but the problem that I have is that my tablet really has the lock fastboot, and for that reason I have been looking for other alternatives in order to install custom roms without losing the current rom.
But now I'm in serious trouble because Goomanager urge upon the OpenRecovery-also install TWRP-2.5.0.0-hws7300u.img. using OPENRECOVERYSCRIPT.
This worked perfectly and manages to do the installation, but the problem is that not good for my huawei tablet and did not start properly.
I have now a recovery.img which is the stock of the tablet, but as I have the fastboot lock, I can not install it with adb and other methods I found surfing the web, so I ask for your help, if I can I can show you how to install the stock recovery in a safe and transparent, you do not need that this unlock fastboot.
Or if I can use the OpenRecoveryScript GooManager Scrip somehow to not install the OpenRecovery-TWRP-2.5.0.0-hws7300u.img and achieves install my recovery.img which is what I want to use.
I have similar problem. Installed TWRP 2.5 but it's buggy, cannot complete data backup (hangs with reboot). I need to install a previous twrp version but can't use fastboot for practical reason and rom toolbox crash while starting to flash twrp 2.3 :|
any hint?
Question: goomanager is able to flash a recovery with tablet on and not via adb fastboot, so can we flash a recovery (twrp or stock) via terminal emulator? How?
used good old dd on /dev/block/mmcblk0p17 partition
How and where..
Working on my brothers mediapad.. he have installed twrp 2.3.2.3 and it cant flash either stock or any roms i tested with. it say faild.
So now i want back to stock rom and stock recovery. Or get this crap to work.
Any help.?
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
TheMasterMindGT said:
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
Click to expand...
Click to collapse
how do you return from 10.1 cynogenmod the stock rom?
Hi, I have a problem with my mediapad, I have TWPR installed 2.3.2.3 and I wanted to go back to stock recovery and tryed and I thougt I did it and now my mediapad boots into TWPR every time I turn it on and cant acces my OS.
bledy said:
Hi, I have a problem with my mediapad, I have TWPR installed 2.3.2.3 and I wanted to go back to stock recovery and tryed and I thougt I did it and now my mediapad boots into TWPR every time I turn it on and cant acces my OS.
Click to expand...
Click to collapse
Your ROM is probably corrupted. Happened to me before. Reflash the ROM.
At worst your unit is about to go kaput. It's 3 years old already. Mine has had 2 battery replacements, and the screen has lost sensitivity on one corner.
joytest said:
Your ROM is probably corrupted. Happened to me before. Reflash the ROM.
.
Click to expand...
Click to collapse
How do you reflash the factory mediapad ROM when it boots into TWRP?
mmth said:
How do you reflash the factory mediapad ROM when it boots into TWRP?
Click to expand...
Click to collapse
Copy the Update folder onto SDCard and reboot. It's the simplest device to flash.
It is booting into TWRP. I can select upgrade.zip with TWRP but the installation fails. How can I get TWRP to stop being the boot agent ?
mmth said:
It is booting into TWRP. I can select upgrade.zip with TWRP but the installation fails. How can I get TWRP to stop being the boot agent ?
Click to expand...
Click to collapse
You probably have to try the adb method, or flash a stock recovery image from the stock ROM.
The adb method is covered in other threads here, but offhand what I recall would be :
1. Use the Huawei Update Extractor to extract your recovery.img, system.img etc
2. Place these on your sdcard.
3. In TWRP, use adb commands to flash recovery first.
If it works, then you should be able to perform the normal sdcard upgrade.
Hi xda!
I have a Z5C and i was tired of sonys laggy version of Android so I decided to install zombie kernel with twrp as backup.
The kernel works brilliant but I can only boot to recovery with help from fastboot. I would like to be able to boot to recovery directly from my phone without the use of fastboot/PC..
I also have a z4 tablet with Androplus kernel with twrp recovery.. And I am able to boot directly from the tablet to recovery.
So I decided to install Androplus and twrp for my z5c. I tried to install twrp through twrp and it looked like it was installed... However still not able to boot to recovery without fastboot. Then I tried to install with fastboot and I got an error - picture attached.
When I look under "about phone" the phone tells me that I'm still using the old zombiekernel??
How do I get Androplus kernel and working twrp installed on my z5c?
Thanks in advance
asl0501 said:
Hi xda!
I have a Z5C and i was tired of sonys laggy version of Android so I decided to install zombie kernel with twrp as backup.
The kernel works brilliant but I can only boot to recovery with help from fastboot. I would like to be able to boot to recovery directly from my phone without the use of fastboot/PC..
I also have a z4 tablet with Androplus kernel with twrp recovery.. And I am able to boot directly from the tablet to recovery.
So I decided to install Androplus and twrp for my z5c. I tried to install twrp through twrp and it looked like it was installed... However still not able to boot to recovery without fastboot. Then I tried to install with fastboot and I got an error - picture attached.
When I look under "about phone" the phone tells me that I'm still using the old zombiekernel??
How do I get Androplus kernel and working twrp installed on my z5c?
Thanks in advance
Click to expand...
Click to collapse
To boot to recovery in the z5c you gotta pudg the volume up while booting over and over until you see the notification LED go red-yellow-orange
Once you're in recovery you could restore your old kernal if you made s bsckup
I know... But that is not working. The only way i can get it to boot is with fastboot. What to do?
asl0501 said:
I know... But that is not working. The only way i can get it to boot is with fastboot. What to do?
Click to expand...
Click to collapse
Try flash tool to push anew kernel maybe.I've never done it but from what j have read, download your firmware from xperia firmware and use flash tool to only flash kernel.
You need to use fastboot to flash the boot.img to the phone and then do the same for recovery.img. It will then work with androplus kernel and twrp.
Thats my setup currently.
spikeyhair said:
You need to use fastboot to flash the boot.img to the phone and then do the same for recovery.img. It will then work with androplus kernel and twrp.
Thats my setup currently.
Click to expand...
Click to collapse
Sorry to resurect this old thread. Can you or anyone provide a boot.img or how to go about creating one? I am in same situation (stuck at boot screen) and only have access to fastboot. Thanks.
For which version of rom? I can give you 32.0.A.200 boot.img and twrp recovery.
Are you sure you're clicking volume up when booting? It doesn't work when you hold the volume up button down.
If y'all go to the twrp thread there is a modified boot.IMG that allows booting to recovery now.
Hi People, I hope someone out there can help with the problem I have. I'm trying to install TWRP recovery and it results in all Twrp versions 2.xx, i get OPPO powered by Android screen then goes blank. All Versions 3.xx I get the aforementioned screen and it sticks on it. I'm using the unrooted stock version of project spectrum 1.1 atm. I did install the CM recovery when it was around a while back on the device but after bricking it I'm back on stock firmware now and want to use lineageos.
I have tried every method and every TWRP package via fastboot but with no luck, I have been successful before but not now. Thanks
Any luck with it. I'm also stuck with twrp-3.0.2-0-r5.img
davendiva said:
Hi People, I hope someone out there can help with the problem I have. I'm trying to install TWRP recovery and it results in all Twrp versions 2.xx, i get OPPO powered by Android screen then goes blank. All Versions 3.xx I get the aforementioned screen and it sticks on it. I'm using the unrooted stock version of project spectrum 1.1 atm. I did install the CM recovery when it was around a while back on the device but after bricking it I'm back on stock firmware now and want to use lineageos.
I have tried every method and every TWRP package via fastboot but with no luck, I have been successful before but not now. Thanks
Click to expand...
Click to collapse
davendiva said:
Hi People, I hope someone out there can help with the problem I have. I'm trying to install TWRP recovery and it results in all Twrp versions 2.xx, i get OPPO powered by Android screen then goes blank. All Versions 3.xx I get the aforementioned screen and it sticks on it. I'm using the unrooted stock version of project spectrum 1.1 atm. I did install the CM recovery when it was around a while back on the device but after bricking it I'm back on stock firmware now and want to use lineageos.
I have tried every method and every TWRP package via fastboot but with no luck, I have been successful before but not now. Thanks
Click to expand...
Click to collapse
Hi, i had the same problem but managed to fastboot this recovery successfully:
https://androidfilehost.com/?fid=1395089523397922634
Hope it works for you too.
Cheers!
hi
i am on miui 10 beta andriod pie.
i tried to flash twrp recovery .
but phone turns black from fastboot mode.
please help me.
Please install adb and fastboot driver at pc.... Enable usb debugng option in develpr option
I have previously flashed different rom long ago with the same pc
After updating to version 8.11.29 I also have the same and now do not reset twrp
i am having a wierd isuue with recovery
twrp is always geting replaced by stock recovery
Balaji Dasari said:
i am having a wierd isuue with recovery
twrp is always geting replaced by stock recovery
Click to expand...
Click to collapse
It is not weird at all. Only custom ROMs come without built in recovery and so they won't overwrite TWRP. Stock ROMs always come with built-in recovery which will overwrite TWRP.
The solution is to flash TWRP again after flashing the ROM and before booting to system. For good measure, after flashing TWRP, flash Magisk and your TWRP will remain.
Thread moved to the correct section.
Lupin The Third
Forum Moderator
finally able to flash
Balaji Dasari said:
hi
i am on miui 10 beta andriod pie.
i tried to flash twrp recovery .
but phone turns black from fastboot mode.
please help me.
Click to expand...
Click to collapse
hey there i was going through same problem for me it worked when i changed the usb port .....if it helps try changing the port or use the multi ports