Related
When I tryed to flash MeanICS on my evo all appeared to go well until I rebooted. After rebooting I only got a black screen. I can still boot into bootloader which gives me hope. I tryed reflashing Mean and a couple of other ROMs but the problem persists. I was hoping someone may have had a simular problem and had a fix or workaround that I could try.
Thx
Check my guide I listed this exact issue in troubleshooting, if you have any questions after feel free to ask
Thank you for your help. I now understand the problem (bootloop, caused probably by the kernel) but even a full wipe using twrp I can't get any ROMs to load, and I was not thinking and didn't make a back up.
Download a ROM and verify the check sum then unzip and place the boot.img in your adb tools (or SDK depending on what you use) boot to boot loader and select fastboot (from PC terminal, sorry) type fastboot flash boot boot.img and then in recovery try to flash the ROM zip. Be sure to wipe dalvik, cache, factory reset and system first to avoid issues
---------- Post added at 05:35 PM ---------- Previous post was at 05:22 PM ----------
I just noticed you said black screen, that most definitely is a kernel issue but its a ROM base mismatch, you just needed to fast boot the mean kernel most likely
I had this problem literally yesterday. All you need to do is flash the boot.img located in the unzipped folder of meanrom and then flash via fast boots via pc or mac. Wipe everything first and then flash the BOOT.IMG. THEN FLASH MEAN ROM and wipe cache etc.
Sent from my EVO on CM10
Yeah I read too quickly and missed the part about the black screen. I decided it was better to outline the whole process
ok i downloaded a new rom, verified md5sum, and unzipped the rom. i also downloaded eclipse and am linking eclipse and android sdk to try and make this a little easier, i hope. i feel like such a total noob, well for the most part i am.... i guess what i am saying is that i don;t know if i am removing boot.img from zip or if i'm just checking something on the boot.img using adb
You just need adb tools, you are making this a little harder then it needs to be
---------- Post added at 06:08 PM ---------- Previous post was at 06:02 PM ----------
Sorry, couldn't remember the exact name, do a search for evo4glteroot2 its basically adb tools
http://downloadandroidrom.com/file/HTCEvo4GLTE/rooting/Evo4GLTERoot2.zip
It took me a bit to realize what you guys were telling me to do.. I can be dence at times. But thank you very much my phone is now fixed.
No prob. Sorry if I at any time seemed hostile, I have been having issues with loud neighbors who have legal permission to make noise all damn night and have done so all week, I'm very agitated
---------- Post added at 08:01 PM ---------- Previous post was at 08:00 PM ----------
Oh god now I'm confusing threads again
Hello there,
i have been searching for hours in the net but i can't find any help!!!!!
So,here's the case:
i rooted my x10 mini so i can install custom firmware.After that i installed xrecovery via root explorer.Until here everything was working perfectly.After that i installed flashtool and unlocked the bootloader.I restarted the phone and got into recovery menu by pressing "back" several times when the 'White logo came". In recovery menu i made a factory reset and wiped cache.Then i choose to install a custom firmware from zip file but an error came "install failed" or something like that.After rebooting the phone nothing happens.The phone does not vibrate,no green light the comes,i can't go in flash mode and if i press "home and power" nothing happens and of course not detected from the pc.The phone seems to bee 100% dead!!!Is there a way to recove it??????
Please i NEEEEDD YOUR HEEEEEELPPPP!!!!!!!!!!
disconnect the battery and rstaret phone
Sent from my E10i using xda app-developers app
i have already done this but nothing happens
Somethings wrong. Tell me, what are you FIRST trying to achieve?
a rooted stock firmware(2.1-update1) with unlocked bootloader?
or a custom ROM working on top of a custom Kernel?
i firstly tryied to achieve a rooted phone with custom firmware and now i am trying to get it turn on!!!
petran_gr said:
i firstly tryied to achieve a rooted phone with custom firmware and now i am trying to get it turn on!!!
Click to expand...
Click to collapse
Put it on the wall-charger for an hour or so, see if something happens.
custom firmware? what is that? do you mean custom rom and a custom kernel. If you are trying to have one of this roms:MiniCM7/8/9,GingerDX,MiniCM7pro,ArcMiniNXT™,etc which is commonly working on top of the nAa kernel. I think you should flash the kernel first to have a CWM recovery not an Xrecovery then flash properly a ROM.
i can't go into flash mode,the phone does nothing!Is there another way to recover it back to stock???
Find/Search,google it and ask others on this forum on how you can get an Stock Firmware. It's worth 224mb. everyone should have one for this will be the back to stock restore point.
you can use it by flashing it to Flashtool. afterwards you are back on stock. not rooted, and got it's warranties back.
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
you can go to flashmode with a trick, so you can flash your stock firmware.
power off, remove the battery. attach usb cable, hold back button, then insert the battery. It will be on flashmode. =') chiiiiiiiing. your x10mini is back.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I found it.
SmG67 said:
for unlocked bootloader: download
for locked bootloader: download
They're about 210mb, although the site may indicate differently... just wait till the download is done. Put it in the firmwares folder and flash...
Click to expand...
Click to collapse
i tried the trick with the battery removal but it does not connect.I also put it in wallcharger for about an our but nothing happens.it is completely bricked
I still don't believe you are in a HARD BRICK.
I never had one. The LED doesn't turn on? It should turn green. and should be connected in flashmode.
no the led is also dead,
i thing it is the bootloader that bricked the phone.i read something about the week of construction but am not sure what it is.Mine is 10w22 if it's any help.
petran_gr said:
no the led is also dead,
i thing it is the bootloader that bricked the phone.i read something about the week of construction but am not sure what it is.Mine is 10w22 if it's any help.
Click to expand...
Click to collapse
After unlocking the bootloader you could still get into recovery, so that didn't brick your phone. Which Firmware were you trying to install when it failed?
SmG67 said:
After unlocking the bootloader you could still get into recovery, so that didn't brick your phone. Which Firmware were you trying to install when it failed?
Click to expand...
Click to collapse
see? base on what he said, theres nothing to cause a Hard brick on his device. He's even on to x10mini not x10mp(that has some more issues because of the flex)
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
I really don't believe you are in HARD BRICK.
if you can only go to flashmode you can have it back. think of any way to go to flashmode. or try and try again to do what I told you to enter Flashmode. you should open the flashtool then try my trick.
i tried to install this rom:
http://forum.xda-developers.com/showthread.php?t=2054144
petran_gr said:
i tried to install this rom:
http://forum.xda-developers.com/showthread.php?t=2054144
Click to expand...
Click to collapse
ooooh the sevenbean. there should be another requirement, the CWM recovery. not the Xrecovery. things you should have done are the following:
1. Root
2. Unlock the bootloader
3. Install the nAa-JB-03 kernel
4. Enter CWM recovery
5. Full wipe(wipe data factory reset, Wipe cache, Wipe Dalvik, Format Data, Format System)
6. Flash the SevenBean Rom.
and what about now??is there another way to get back to stock without flash mode?For example by copying files to the sdcard??
I don't think there is. If only you could enter the flashmode.
PS can you enter Xrecovery?
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
how to flash KERNEL on xperia x8/x10 mini
no,i can's enter xrecovery mode because it does not even turn on
Your only hope is entering the flashmode. can you do an offline charging?
Hi, i have moto e 2014 xt 1022 unlocked ,
Problem is it always goes into bootloop or stucks at moto logo
Whenever i install flash it in new stock rom, it happens again & again no matter what
Can someone guide me please ? Or if anyone having same problem
If you are flashing kitkat stock rom then download batch file
androidfilehost.com/?fid=24269982087018373
If you are flashing Lollipop stock rom then download batch file
androidfilehost.com/?fid=24269982087018369
Just extract the rar file and firmware into same location and click on FLASH batch file :good:
GNVM said:
If you are flashing kitkat stock rom then download batch file
androidfilehost.com/?fid=24269982087018373
If you are flashing Lollipop stock rom then download batch file
androidfilehost.com/?fid=24269982087018369
Just extract the rar file and firmware into same location and click on FLASH batch file :good:
Click to expand...
Click to collapse
Thanks for the reply
Battery is low showing in bootloader
I am not able to charge it even with 2amp charger
Nothing is happening ! Can't run fastboot commands until battery low is showing
Turn off the phone and try to charge and try again.
hi there ,i fixed it
as there was 2 issues with my moto e
1.it won't start due to corrupted rom
2.i was not able to flash it via fastboot as battery was low (actually 0%)
so my prime concern was to flash stock rom first.
to remove battery low in bootloader you have to just remove
back cover ,unplug the battery from motherboard (or you can use motorola factory cable but first one is recommended).
after disconnecting the plug connect the phone directly with charger then go to bootloader.
voila now it will show battery is ok so i was able to flash files.
then plug the battery while charger should be connected to power supply.
leave the phone for while now it should charge.
but you should do this only if you can go to bootloader or try motorola factory cable
Good to here you fixed your phone.
Hi there,
i jump on this topic to say that i have exactly the same problem.
I downloaded the stock rom XT1022_CONDOR_RETAILDSDS_5.1_LPC23.13-34.8_cid7_CFC.xml.zip.
In first i used the command line like in this Guide ---> stucked in the blue logo
Then i used the .bat for lollipop from this topic ---> still the same
But i could read that each steps from the command lines were marked OKAY.
I don't know what i have to do now...
Please help
Finally it's good with the .bat, it was just very very very long
bonbonboy said:
Hi there,
i jump on this topic to say that i have exactly the same problem.
I downloaded the stock rom XT1022_CONDOR_RETAILDSDS_5.1_LPC23.13-34.8_cid7_CFC.xml.zip.
In first i used the command line like in this Guide ---> stucked in the blue logo
Then i used the .bat for lollipop from this topic ---> still the same
But i could read that each steps from the command lines were marked OKAY.
I don't know what i have to do now...
Please help
Click to expand...
Click to collapse
Were you trying to upgrade from kitkat to lollipop?
here's something unusual, please provide me the link from where you downloaded that firmware.
-z3r0- said:
Were you trying to upgrade from kitkat to lollipop?
here's something unusual, please provide me the link from where you downloaded that firmware.
Click to expand...
Click to collapse
I have downloaded it from http://forum.xda-developers.com/show....php?t=2755857 and facing same issue. earlier I had lollipop, then I had to flash stock rom. Read my concern at http://forum.xda-developers.com/mot...-stuck-boot-loop-wiping-t3281341#post64546531
Need Help
---------- Post added at 05:42 PM ---------- Previous post was at 05:31 PM ----------
GNVM said:
If you are flashing kitkat stock rom then download batch file
androidfilehost.com/?fid=24269982087018373
If you are flashing Lollipop stock rom then download batch file
androidfilehost.com/?fid=24269982087018369
Just extract the rar file and firmware into same location and click on FLASH batch file :good:
Click to expand...
Click to collapse
I have tried for the lollipop stock rom, with your provided batch file. Still stuck at Moto logo during boot.
---------- Post added at 06:15 PM ---------- Previous post was at 05:42 PM ----------
rahulroyale said:
Thanks for the reply
Battery is low showing in bootloader
I am not able to charge it even with 2amp charger
Nothing is happening ! Can't run fastboot commands until battery low is showing
Click to expand...
Click to collapse
Edit:- Thanks Rahul. I believe that your batch file doesn't clear the cache. That is why it did not boot in the first time. Second time on boot it worked like charm.
theankush said:
I have downloaded it from http://forum.xda-developers.com/show....php?t=2755857 and facing same issue. earlier I had lollipop, then I had to flash stock rom. Read my concern at http://forum.xda-developers.com/mot...-stuck-boot-loop-wiping-t3281341#post64546531
Need Help
---------- Post added at 05:42 PM ---------- Previous post was at 05:31 PM ----------
I have tried for the lollipop stock rom, with your provided batch file. Still stuck at Moto logo during boot.
---------- Post added at 06:15 PM ---------- Previous post was at 05:42 PM ----------
Edit:- Thanks Rahul. I believe that your batch file doesn't clear the cache. That is why it did not boot in the first time. Second time on boot it worked like charm.
Click to expand...
Click to collapse
May be but my moto e is dead now
actually i installed stock lollipop with twrp recovery
Which was provided by lost101 named user
It messed up my bootloader i am unable to load my bootloader + motorola has not released moto signed image of bootloader for moto e.
So it is lying around like paper weight
i recently followed this thread to unlock the bootloader and install a custom recovery everything went okay but whenever i install any ROM i don't get WiFi even the ones that says "stock".
my recovery is Carliv MTK CWM-Based v6.0.4.4
I didn't take a backup from my old ROM because it was corrupted and i thought that a ROM that says "stock" on xda will be the same.
Please Please help, my tablet is useless without WiFi
Hi try to flash other rom or stock firmwear ( it's rom error )
NileshSolanki04 said:
Hi try to flash other rom or stock firmwear ( it's rom error )
Click to expand...
Click to collapse
i tried over 5 ROMs and there's not much ROMs for this device out there, i think it's because something else
McLovin01 said:
i tried over 5 ROMs and there's not much ROMs for this device out there, i think it's because something else
Click to expand...
Click to collapse
Try to flash stock firmwear
Can you post screen shot
NileshSolanki04 said:
Try to flash stock firmwear
Can you post screen shot
Click to expand...
Click to collapse
screenshot of what?
when i press toggle the wifi/bluetooth button it goes on and off again in a second
mac address under wifi -> advanced is "unavailable"
McLovin01 said:
screenshot of what?
when i press toggle the wifi/bluetooth button it goes on and off again in a second
mac address under wifi -> advanced is "unavailable"
Click to expand...
Click to collapse
Just follow below step
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
NileshSolanki04 said:
Just follow below step
Click to expand...
Click to collapse
i think your reply is missing something
That is most likely a kernel issue. The missing Mac says that the efs got corrupted. This is a known issue when messing with mtk devices and part of the reason they are nor advised to mess with.
You could try doing full a complete stock install and relocate the bootloader. (some devices have safety protocols that break things when unlocking the bootloader)
Your best bet is to pull a log of trying to turn it on and that will tell you what you need to know. Should have been the first thing you did really.
NileshSolanki04 said:
Just follow below step
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
Click to expand...
Click to collapse
go to data/misc/wifi (required root)
-backup file wpa_supplicant.conf in this folder which contains usename and password wifi
- delete all file in this folder
- turn on wifi ( if you careful, you can reboot )
- now you can connect to wifi
- recovery file wpa_supplicant.conf
First Make Nandroid Backup
Here's the deal,
1. I was on resurrection remix 7.1 custom rom with TWSRP recovery installed.
2. Wanted to go back to stock huawei honor 5x OS so I downloaded it on the internet, since I live in Malaysia, I searched for "Huawei Honor 5x Stock Rom Malaysia Variant"
3. Flash the rom, got EMUI 2.0 instead of the written EMUI 3.1 on the file (the file name is KIW-L22_C636B130_Firmware_Android 5.1_EMUI 3.1_Malaysia.zip"
4. Flashed HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002.zip that I got from huawei's website
5. Stuck in bootloop.
6. I went into TWRP recovery and tried to do something but I couldn't use the touchscreen for some odd reason
7. Went and browsed XDA for around 2 hours and found that I can install another recovery that uses the volume buttons and the power buttons to navigate, thus I installed a recovery called "carliwm touch recovery"
8. Was happy could finally do something, successfully flashed the recovery. Went and downloaded Lineage OS rom based on my mistakes that I've done and never want to go back to stock rom.
9. The recovery has an option to mount the external sd card (my sd card in my phone, dont know why it's called as such), so I did, I still couldn't navigate using the touchscreen as it's disfunctional still but can still navigate using volume and power buttons.
10. Wiped all data, flashed Lineage OS, flashed GAPPS.
11. Stuck in recovery for some reason, can't get into my phone. I've re-flashed it many times
For those who want to know my phone model, it's KIW-L22. When it had stock rom it was EMUI 4 something, can't remember as it's very vague. I think it was marshmallow
Please help
EDIT:
I use Huawei Update Extractor to get into the stock rom that had EMUI 2.0, extracted the System and Recovery images
Used this video ( https://www.youtube.com/watch?v=EoZQHTidnGA&t=629s ) to flash back to stock rom that had EMUI 2.0
The only way to get out of the recovery is to reboot the phone
In the bootloader, it says "PHONE Unlocked" and "FRP Unlock"
UPDATE:
I've tried to follow the video again and re-flashed the stock rom with EMUI 2.0 and it still doesn't work
I've wiped everything in the phone using the recovery (wiped data and factory reset), going to sleep as it's 4:37 AM
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
swukjay said:
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
Click to expand...
Click to collapse
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
TurtleKicks said:
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
Click to expand...
Click to collapse
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
Click to expand...
Click to collapse
In your case tick everything including modem But dont tick EFS
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
In your case tick everything including modem But dont tick EFS
Click to expand...
Click to collapse
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
EDIT: I've done what you told me based on your guide, still doesn't work, probably cause I'm using the CWM based recovery
Dan Ger said:
Hey man im from Malaysia too,im sorry for you because right now you got bricked your device.. eventually when you already flash 4.1 emui you cant go back to stock rom...
And you have flash wrong system number for our Malaysian version..i cant help
Click to expand...
Click to collapse
So there's no hope for me? If I were to send it to a phone repair shop, it won't do anything?
TurtleKicks said:
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
Click to expand...
Click to collapse
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
swukjay said:
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
Click to expand...
Click to collapse
is this website trustable? https://android.****************/ho...actory-images-android-using-fastboot-0175277/ as a guide
huh nevermind, its censored, then do you have any idea how to flash the boot partition?
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
swukjay said:
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
Click to expand...
Click to collapse
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
TurtleKicks said:
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
Click to expand...
Click to collapse
Your last option is e-recovery
swukjay said:
Your last option is e-recovery
Click to expand...
Click to collapse
im very sorry but what's e-recovery?
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
swukjay said:
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
Click to expand...
Click to collapse
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
TurtleKicks said:
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
Click to expand...
Click to collapse
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
Click to expand...
Click to collapse
Touchscreen doesn't work at all, can't do anything except for navigating using the power buttons
TurtleKicks said:
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
Click to expand...
Click to collapse
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
Click to expand...
Click to collapse
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
Click to expand...
Click to collapse
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
TurtleKicks said:
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
Click to expand...
Click to collapse
Nice one glad its working
---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ----------
Dont forget to MAKE A BACKUP !