Right peeps, Having a bit of trouble here. I bought the Oukitel K6000 Pro and it came installed with a trojan virus, which i believe is pretty normal for a lot of chinese phones these days anyway. I contacted the company I bought it from and they gave me full instructions to flash the phone.
I have flashed the phone using Sp Flash tools (on both Linux and windows 7) but the phone will now not work! I have installed all the drivers needed (which is so much handier in Linux). After flashing it said download ok. I tried to turn the phone on but only the screen lights up but does nothing at all and also booting to recovery shows nothing either.
It can still be recognised by the computer and sp flash tools but nothing seems to work! Your Help would be much appreciated if there is anyway to fix it! I have sp flash tools V5.1520.00 on Linux and the ROM I am using to flash is Oukitel K6000pro V8.0_20160607 6.0 Marshmallow from needrom. Sorry if this is in the wrong section or not allowed Also Hello as I am new here
Hi! Go to http://forum.xda-developers.com/gen.../oukitel-battery-beasts-k6000-k10000-t3279075
Tried to flash the phone, but firmware was wrong, so now it's dead
Hi,
I am enthousiastic about the Oukitel k6000 pro. It works wonderful and is pretty rugged and very cheap. Paid €165. It is my first android, so need a lot of catching up to do...
There is a security system in place by Oukitel by which you can remotely wipe the data or send your forgotten password by sending a text message #mime# for example. But, when my wife changed her simcard, without unlocking the security, the phone went in lock mode. So fare so good. So now we send it a SMS. But, the SMS never gets to the phone. It cannot be delivered. So the phone was well locked. :crying:
Then we thought, by information of GeekBuying, that you can flash the phone. Well, that did not work so well either. It got flashed alright. After I found out you need to get in the reception mode first. Now the computer recognized the phone. But then the error firmware is wrong came up and now the phone is dead. A perfect hardly used phone is dead.
Is there somewhere software to flash it again and get it going? I have a windows XP, X or mac computer.
At least it is a relatively cheap phone to learn everything. Who knows what we will be doing with in a few years. With less computerpower they went to the moon.
Kind regards,
Frank
Related
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Perarg said:
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Click to expand...
Click to collapse
I have the same problem patrida !!! Have you found out a sollution yet ?
Use SP_Flash_Tool_v3.1344.0.212
And select Firmware -> upgrade
Hallo experts, i've been xda reader for about 2 years now and i didn't bothered (or needed) to register. Flashed succesfully couple of phones.
My current phone however, has given my too much rage trips So here's the story:
Bought a "Alps U9000" which is a Note 3 Clone based on mtk6589 chipset.
First i made a Backup with MT Droid Tools.
Figured out and installed mt65xx vcom usb drivers.
Flashed couple of roms compatible (or not?) with my phone. First day my phone went totally black dead. But somehow i managet to get a rom that is identicall with stock, flashed and voila. Then i tried couple more similar roms.
They all worked, but after fifth or so, this is the weird thing, my touch became totally unresponsive. Nada.
Since then i tried everything and nothing helped. Bunch of different roms, MY Backup Rom, Restoring Imei,
Plugged mouse to a phone and it works like a charm, but no touch.
Can someone Help?
Hint: I flashed everything with the battery, using MTK preloader vcom driver.
When i tried whole Rom without battery pressing Vol+ it failed.
Only preloader without battery worked, and then the rest with battery worked also.
Dont know if it's relevant.
Any help would be much appreciated.
lutec.ludwig said:
Hallo experts, i've been xda reader for about 2 years now and i didn't bothered (or needed) to register. Flashed succesfully couple of phones.
My current phone however, has given my too much rage trips So here's the story:
Bought a "Alps U9000" which is a Note 3 Clone based on mtk6589 chipset.
First i made a Backup with MT Droid Tools.
Figured out and installed mt65xx vcom usb drivers.
Flashed couple of roms compatible (or not?) with my phone. First day my phone went totally black dead. But somehow i managet to get a rom that is identicall with stock, flashed and voila. Then i tried couple more similar roms.
They all worked, but after fifth or so, this is the weird thing, my touch became totally unresponsive. Nada.
Since then i tried everything and nothing helped. Bunch of different roms, MY Backup Rom, Restoring Imei,
Plugged mouse to a phone and it works like a charm, but no touch.
Can someone Help?
Hint: I flashed everything with the battery, using MTK preloader vcom driver.
When i tried whole Rom without battery pressing Vol+ it failed.
Only preloader without battery worked, and then the rest with battery worked also.
Dont know if it's relevant.
Any help would be much appreciated.
Click to expand...
Click to collapse
Tutorial on using MTK Droid Tool & SP Flash Tool here http://forum.xda-developers.com/showthread.php?t=2160490
Noob_XDA said:
Tutorial on using MTK Droid Tool & SP Flash Tool here http://forum.xda-developers.com/showthread.php?t=2160490
Click to expand...
Click to collapse
Yeah i read all that yesterday. And flashing works like a charm. My question is:
What is more possible:
Digitizer was fried in the process of trying roms and usb drivers
/
or
/
i missed a step, made incomplete backup with some wrong version of DT?
Can i finally break my brick i two or shoud i research some more?
lutec.ludwig said:
Yeah i read all that yesterday. And flashing works like a charm. My question is:
What is more possible:
Digitizer was fried in the process of trying roms and usb drivers
/
or
/
i missed a step, made incomplete backup with some wrong version of DT?
Can i finally break my brick i two or shoud i research some more?
Click to expand...
Click to collapse
Flashing your original boot & system image ONLY back to your phone should be enough to restore it.
Don't tick other check boxes in SP Flash Tool.
help me! :C
lutec.ludwig said:
Hallo experts, i've been xda reader for about 2 years now and i didn't bothered (or needed) to register. Flashed succesfully couple of phones.
My current phone however, has given my too much rage trips So here's the story:
Bought a "Alps U9000" which is a Note 3 Clone based on mtk6589 chipset.
First i made a Backup with MT Droid Tools.
Figured out and installed mt65xx vcom usb drivers.
Flashed couple of roms compatible (or not?) with my phone. First day my phone went totally black dead. But somehow i managet to get a rom that is identicall with stock, flashed and voila. Then i tried couple more similar roms.
They all worked, but after fifth or so, this is the weird thing, my touch became totally unresponsive. Nada.
Since then i tried everything and nothing helped. Bunch of different roms, MY Backup Rom, Restoring Imei,
Plugged mouse to a phone and it works like a charm, but no touch.
Can someone Help?
Hint: I flashed everything with the battery, using MTK preloader vcom driver.
When i tried whole Rom without battery pressing Vol+ it failed.
Only preloader without battery worked, and then the rest with battery worked also.
Dont know if it's relevant.
Any help would be much appreciated.
Click to expand...
Click to collapse
dude I am new in the forum just like you, same situation and I have exactly the same phone, I already searched in needrom and already tryied with several roms, since the original its really really almost impossible to find, I looked everywhere seriously, if you can help me I would be so happy, I just need the link from where you find it or your backup, I know the second choice is asking for too much but with mega is not really that hard, you dont need to help me but if you do it I swear I would help other people with the same phone
what I know about this phone is that its manufactored by alps and they sell it as ulefone model:u9000, my box came with no brand-mark at all, only crap like "Its Android Phone !" quadcore cpu and other stuff
Well, if you need original rom for the device I can share with you.
I just bought another exact same one. Downloaded Rom from it with flash tool via read back option.
Flashed the faulty one with it but still it didn't worked.
System works, WiFi, BT, 3g, but no touchscreen. Only with mouse per USB i was able to test the above mentioned.
I guess I will send it back and hope for a refund or a repair because I am pretty sure the hardware is faulty.
Maybe there is some1 that knows more about mtk devices? Does the phone have only the emmc memory or is there some sort of vram that stores Calibration data for touch, imei number and so on?
After many attempts my N9002 showed signs of life. I managed to flash it with a rom N9000. The cell phone on, the screen is backlit, the samsung startup sound is heard, the back and lie buttons light up menu. But the screen goes black and shows no image.
Someone can help me?
Search for N9002 ROM's in Needrom.
Hi all,
I have Gionee elife s5.5 and it had english rom (android 4.2.2) with google play installed. The problem was it kept freezing a couple of times a day, so I tried to reinstall the only official rom I could find (CBT5701A01_A_T2898) with flash tool. After the installation, it got stuck in the boot loop.
I tried:
- entering the recovery mode and cleaning the cache
- entering the recovery mode and factory reset/wipe
- reinstall rom with flash tool with update option
- reinstall rom with flash tool with download option
- reinstall rom with flash tool with download and format option
- reinstall rom with flash tool v3.1344.0.212 and v5.1352.01
So far, no luck. The only answer I can think of is that this rom is not for my phone version. Anybody has any idea what can I do? Or does anybody have some other rom I could try to install?
Thanks in advance.
tchs said:
Hi all,
I have Gionee elife s5.5 and it had english rom (android 4.2.2) with google play installed. The problem was it kept freezing a couple of times a day, so I tried to reinstall the only official rom I could find (CBT5701A01_A_T2898) with flash tool. After the installation, it got stuck in the boot loop.
I tried:
- entering the recovery mode and cleaning the cache
- entering the recovery mode and factory reset/wipe
- reinstall rom with flash tool with update option
- reinstall rom with flash tool with download option
- reinstall rom with flash tool with download and format option
- reinstall rom with flash tool v3.1344.0.212 and v5.1352.01
So far, no luck. The only answer I can think of is that this rom is not for my phone version. Anybody has any idea what can I do? Or does anybody have some other rom I could try to install?
Thanks in advance.
Click to expand...
Click to collapse
Where did you get the phone? Try looking here, translate it using Google.
http://www.mgyun.com/
I bought it on ebay from China. Thanks for the link but no luck. I've downloaded the new rom and the romaster program (I'm guessing I should use it for the installation) but the program is not detecting that the phone is connected via usb. Same thing with vroot.
Since this rom is in another format, I was thinking maybe I could install it via adb option in recovery mode but I'm getting 'device not found' message when I try to start adb shell.
tchs said:
I bought it on ebay from China. Thanks for the link but no luck. I've downloaded the new rom and the romaster program (I'm guessing I should use it for the installation) but the program is not detecting that the phone is connected via usb. Same thing with vroot.
Since this rom is in another format, I was thinking maybe I could install it via adb option in recovery mode but I'm getting 'device not found' message when I try to start adb shell.
Click to expand...
Click to collapse
Have you installed the drivers for the phone?http://gionee.co.in/portfolio/elife-s5-5/#t4
---------- Post added at 03:12 AM ---------- Previous post was at 02:30 AM ----------
Try here, you need to register.
http://www.yougerom.com/bbs/forum.php?mod=viewthread&tid=265
Yes, I installed usb and phone drivers. I also installed adb driver (at least adb driver installer says it is installed as android composite adb interface) and yet when I try adb shell, deamon starts ok but I keep getting the message that the device is not found.
The rom from your link is the same one I already have, but thanks anyway.
All this is very frustrating. Seems like everywhere I go, I hit the wall:
- if the phone has sdcard I could try install rom from there, but it doesn't
- if adb connection works I could try that, but it doesn't
- if romaster detects the phone I could try install it from there, but it doesn't
- sp flash tool is working but I could find only one rom version and it's not working
You did the brushing before installing the flash've used Flashtool?
Have you looked in setting pc, peripherals, if you have something in conflict, if you do not have the yellow exclamation mark?
Also I have just bought this phone, by Liaow, who did the root and installed the Playstore. Now my phone is still stuck in Hong Kong and I do not know when it will arrive in Italy.
How did you like the phone, the battery life, becomes very hot since the minimum thickness?
I don't know what do you mean by 'brushing' so the answer is probably not?
Everything looks ok in pc's control panel, no conflicts or unrecognized devices etc. It's win7 64bit.
I was thinking about buying it via Liaow but in the end I used ebay. It took 3 weeks to arrive, and I paid for DHL express delivery (!) Isn't EU wonderful thing...
I really liked the phone (in the brief time it was working). Display is great, it's fast and the battery would last for a day without a problem. The build is very solid. I wasn't playing any games on it or use any apps that would use cpu extensively, but in normal operational time I didn't notice any significant heating. I even liked the Amigo skin. It has some nice features and was working very fast. The only problem was it kept freezing couple of times a day, usually after long times of inactivity which led me to believe it has some sort of problem with power saving functions in android (or amigo). Oh one other thing: it doesn't have notification led. I miss that.
If you don't get your phone, I know where you can get one very, very cheap. It's stuck in the boot loop, but still...
Brushing think it is to do a full wipe before doing the flash with Flashtool.
When you receive your phone, you've got an update OTA of 98 mb?
Thank you but the phone I have already paid and are waiting for his arrival.
I hope we put less than three weeks since I also took DHL.
In Italy we have a beautiful community where there are developers who work here in Xda, who are fond of Chinese mobile phones and in particular there is a person who develops rom alternatives.
So I guess I would be able to help me if I had the same problem, but I hope I do not have any problems.
You say you had blocks of hibernation in power saving mode enabled, then maybe in normal mode just fine.
I do not usually use the mode energy in any phone I've had.
I prefer to charge the battery when needed.
First I tried only update, after that I tried full wipe.
I did try to disable every power saving mode I could find, but the phone still kept freezing. Although, there are some options that are useful, like limiting cpu for more energy and lower temperature.
I didn't get OTA update, but the seller told me that they had to open the box to install english rom version with google play. Maybe they also installed this update.
got another elife threat here http://forum.xda-developers.com/showthread.php?t=2699708
Here's the quick update: after I manually edited adb_usb.ini file, adb sideload works now. But...none of the rom's I have can be installed with adb (I get 'installation failed' message after transfer).
So, what I need is:
- rom that can be installed via adb sideload
or
- rom that can be installed via flashtool with scatter file (after extensive search of the web, the only rom I could find on several places is the one made 11-03-2014 and this one is not working for me)
Any help would be greatly appreciated.
tchs said:
Here's the quick update: after I manually edited adb_usb.ini file, adb sideload works now. But...none of the rom's I have can be installed with adb (I get 'installation failed' message after transfer).
So, what I need is:
- rom that can be installed via adb sideload
or
- rom that can be installed via flashtool with scatter file (after extensive search of the web, the only rom I could find on several places is the one made 11-03-2014 and this one is not working for me)
Any help would be greatly appreciated.
Click to expand...
Click to collapse
http://bbs.amigo.cn/thread-758-1-1.html
XPAction said:
http://bbs.amigo.cn/thread-758-1-1.html
Click to expand...
Click to collapse
Thanks but I already tried that. This only works with Romaster app and it doesn't recognize my phone being connected while on boot loop or recovery mode.
Even my phone is stuck on boot, can anyone help me
Tired of searching everywhere cant find it anywhere, can anyone please share a link from where I can download rom for my gionee elife S5.5 Indian version, my phone was working fine until I installed beats audio It asked to reboot and the then it never rebooted, stuck on gionee boot animation, I also flashed the Chinese rom but it doesn't support, phone was booting up but the rom is too lagging and unstable. I don't want to go to the service center cause my phone is rooted and warranty will be voided, I just bought it two days back. Is CWM available for this phone cause I couldn't find that too, I'd be more than grateful If anyone can help me out I just need the rom file (Indian version), thanks a million !!!!
i also tried to install beat audios on my gionee s5.5 ... and now it is not statting my phone get stucks at boot animation logo "gionee smatyphone"
Here are some good news people: needrom.com site finally released new rom version and it can be installed via adb sideload. It is CH/EN version and even when you switch it to English, some things still stay in Chinese but hey - at least it's not in boot loop anymore and now you have more options for rom installation.
Thanks dev, was so sick of this phone and its features, especially free mobile heater(owen) + worst sound ever + lots of lags, even flappy bird lags on this phone though I had optimised the cpu performance using set cpu to its max by creating a profile to play flappy bird, mediatek chipset sucks happy after entering the snapdragon world, just bought M8 yesterday and believe me this is the best phone till date though the ram is 2gb the processor is a the beast and there's no comparison to it and when it comes to the sound no one can beat htc, the looks it feels so ****n premium, the touch is like butter smooth, loving it!! Thanks
Sent from my HTC One_M8 using XDA Free mobile app
how to install rom from needrom via adb shell.?? can anyone explain?
FirmwareFile
https://firmwarefile.com/gionee-s5-5 , i've used T8881 version , and it was good
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q
Hello,
recently I started to play with my Honor 8X JSN-L21 Europe version and I wanted to install a custom ROM from MOS. The instructions said to downgrade my phone to EMUI9.0. I had EMUI10 installed, used HiSuite to downgrade, but it could only go down to EMUI9.1. So, after a little googling, I tried to flash official ROM using the update.app method. After many attempts which ended at 0% the phone finally started to "verify the image," only to stop at 3% and fail. After this i restarted my phone and it is totally bricked. No LED flashing, nothing on the screen, no fastboot/update mode.
The only thing that works now (my computer can see) is putting the phone in COM mode using test point.
I found on the internet some HiSilicon flashing tool that could help, but it doesn't detect my phone when I plug it in (Device Manager says Huawei COM1 - clearly it's connected). The only other option is to buy DX Phoenix and try it out.
Before buying the software, do you guys think it could help? I don't want to spend some $$$ on a software that might (not) work.
Thanks everyone!