Hi,
I had rooted my phone and was using a custom rom with android 2.3.7. Since the phone was lagging and slow, i though of downgrading to 2.1 OTA.
I flashed a 2.1 OTA file via the recovery mode. Now the phone is not booting up and also not entering the recovery mode. While trying to enter the recovery mode, a RED TRIANGLE and an exclamation mark is what is showing. At this point, if i press volume up button and power button together, its going into the Android system recovery mode.
Also i'm able to get into the FastBoot Mode by pressing volume down and power button together. But i've no idea how to use these modes (FastBoot and Android System Recovery).
Please help me out in recovering my phone..
Thanks in advance
Make a goldcard, find a way to flash the stock rom with a goldcard, there are a few tutorials here...
Hi,
I'm pretty new to Android. I recently rooted my phone using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
Dear,
Don't worry. You just need to flash a new stock rom to get everything back., Huawei stock roms can be easily flashed onto the phone. Put the update.zip file in the recovery and simply Apply Update (flash) your rom.
Hi
I have the same problem.I replaced xperia launcher with the original launcher in system/app and then I restarted the phone.but the I got a bootloop and now Im stuck on Huawei`s logo.
I need to install a recovery so I can factory reset the phone or use a recovery file manager to put the original launcher back.Is there any way to install a recovery?
recovery always help me
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
Just try to use the recovery mod by holding power button and vol up then choose wipe data/ factory reset
bootloop
i have Huawei Y530 and its on bootloop..... i cant unlock the bootloader please help..............................................
but my phone is in chinese, and all it do is checks the phone.
and when it enters to 'Factory Mode', it shows " boardtest : FAIL "
Is there any chance to recover it?
hard reset y511
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
hi
pleas hold power for 1sec and relase then hold vol+ + vol-
soroush_gholami said:
Dear,
Don't worry. You just need to flash a new stock rom to get everything back., Huawei stock roms can be easily flashed onto the phone. Put the update.zip file in the recovery and simply Apply Update (flash) your rom.
Click to expand...
Click to collapse
where from i get this update.zip..
Do I need to root my phone before going for this update.zip
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery
Edit: I figured this out... I had to hold volume up and down at the same time while powering up. Also the phone needs to be unplugged. IF its plugged in it will go to Download mode instead of recovery.
Hello,
I recently Went from the stock ATT rom to CM 10.2, and then to Omni.
I can not access CWM recovery by powering the phone on while holding volume up... Ive also tried holding the soft home key.
The only way I can get into recovery is to open ROM manager and choose reboot to recovery. This scares me because if my rom goes haywire I may not have any way to get back into the recovery.
I have already tried re flashing CWM
any ideas?
Quick Boot
You can download the app "Quick Boot" from the Play Store, which has the option to reset into recovery (and many other options)
Hello
I want to flash a stock firmware to my P7500 rooted device. When I turn the device off and then press volume down+power to get into recovery mode, the device does not turn on at all. It turns on normally when I press the power button alone but I cant get into recovery mode. I tried installing boot droid to get the device to reboot into recovery mode, but the device did not reboot at all. I noticed that the app didn't ask for root permission and is not listed in superuser app list. I tried to install another superuser app and that new app said I need to update SU binary but I couldn't because I have to get into recovery mode. I made a factory reset and the problem persists.
any suggestions?
Thank you
I'm a bit stuck here, would appreciate some assistance.
I tried to root my device (UMI Plus) by yesterday using 'SP Flash tool' by flashing TWRP and then installing SuperSU. That went fine, but after booting my Google Play Services kept rebooting rendering the device unusable. In an attempt to fix this I tried a "Factory Reset" via the Android settings menu which I guess was a bad idea because it started auto booting into Recovery... At that point no matter what I did I ended up back in Recovery.. Reboot to system, factory data reset.. all rebooted the phone back into TWRP recovery.
So I thought I would just try putting the default recovery back on the device again but whenever I power off the device and connect it to my PC it boots into recovery.. The phone needs to be powered off for SP Flash Tools to work. Tried loading recovery image via fastboot but the volume rockers don't work in fastboot so I can't confirm the action.
After some digging I read online that holding down VolUp + Power can 'force' into preload mode, which seems to have some success. I can see the device boot into "Preloader mode" in device manager in Windows, but it loses connection after about 3 seconds. So I did that with my SP flash tool ready and it seems to have erased recovery mode. Oops! Now whenever I try to get into recovery it just says "No command". No combination of button pressing, button holding, button releasing or anything will change this (This is the only answer I could find on Google!). Neither fastboot or adb can see the device either. It shows up as "MTP USB device" in device manager in Windows...
Is it doomed? I can't figure out what to do next...
P.S. The full ROM is available here but in RAR format.. which seems strange to me...
http://community.umidigi.com/thread-11462-1-1.html
Poke